Related
The guides listed here are extremely dated.
Not all services mentioned allow new users, and some now require a subscription. Also, the process has been simplified greatly since the creation of these tutorials.
I recommend using an application such as Groove IP to connect directly to Gtalk rather than bounce the call all over the place to different SIP providers.
Trying to find a way to verify GV w/o a active U.S. phone number? This info will still work for that, but you have to use IPKall routed to PBXes extension w/ "info" as DTMF type on (pbxes extension) settings.
Planning to do something more interesting like route multiple gv#s to one place? Than the info might still be useful to you, but only as a point of reference.
These instructions will explain how to get Sipdroid and Google Voice set up so you can use your Android phone with only WiFi or 3g/Edge (no cellular minutes). It also provides a solution to get Google Voice accounts validated for people who lack a US phone number.
Alright I guess these guides were a little more popular than expected. Kept exceeding bandwidth limits for the images, so I had to move 'em.
If you would like to view the original guides please visit my blog
gurnted said:
These instructions will explain how to get Sipdroid and Google Voice set up so you can use your Android phone with only WIFI or 3g/Edge. It also provides a solution to get Google Voice accounts validated for people who lack a US phome number.
Click to expand...
Click to collapse
While I didn't personally use the method myself, a post on the Google Voice discussion forum said you can perform your verification call on a Gizmo number (receive it by logging into the flash client at gizmo5.com)
The first time I set up an ipkall DID, it took a week. Kind of annoying.
Due to bandwidth limits causing the images to go down, I have moved the guides.
gurnted said:
Huh? I tried to use Gizmo to confirm my wife's account a couple weeks ago, and Google Voice said a Landline or Mobile had to be used as the primary forwarding number. If they have in fact changed their policy regarding this, its great news for international users. Maybe someone with a fresh account would be kind enough to give it a try and bless us with the results. Either way thanks for the info.
Click to expand...
Click to collapse
Well, I read that information roughly a month ago so it could have been changed. On Gizmo's gizmovoice.com page, they state that a user can buy a 6-month DID number to accept the GV confirmation call, so I guess its probable that a Gizmo number cannot be used for confirmation.
It's a shame it took so long for ipkall to get back to you. It usually does take a day or two, but a week is awful. Then again waiting 6-8 months for a Google Voice invite is a tad bit more irritating (but still well worth it)
Click to expand...
Click to collapse
Well it was before I even got my GV invite, mainly just as experimentation for getting my SIP setup. Free is free, so I wasn't really concerned.
By the way, I have updated the Sipdroid primer a little. Might make some more tweaks/update the sample pics later.
This is a great tutorial! I'm currently using just the gizmo5 + GV setup, what are the advantages to your way? I am assuming the 3 minute outgoing call limit is gone, but is there anything else?
My #1 complaint with the gizmo5 + GV method (and this may be Sipdroid's fault) is that it seems if I don't make or recieve a call for a few hours... maybe a day... then sipdroid sort of times out, disconnects, and I miss calls even though sipdroid still shows the green connected light. I'm just curious if getting away from gizmo5 would fix this? Thanks!
This is a great tutorial! I'm currently using just the gizmo5 + GV setup, what are the advantages to your way? I am assuming the 3 minute outgoing call limit is gone, but is there anything else?
My #1 complaint with the gizmo5 + GV method (and this may be Sipdroid's fault) is that it seems if I don't make or recieve a call for a few hours... maybe a day... then sipdroid sort of times out, disconnects, and I miss calls even though sipdroid still shows the green connected light. I'm just curious if getting away from gizmo5 would fix this? Thanks!
Click to expand...
Click to collapse
Thank you, and yes you are correct about the 3 minute limit, but you don't have to leave gizmo for that. Just set GV as default dialer and set call method to Call-Back in GV (Be sure to set gizmo # as callback in GV app). Other than that Gizmo5 charged for callerID at the time I set mine up, and I had alot of choppy calls when using them (even using X-Ten and Ekiga from pc). Also Google Voice did not (and I'm not sure if they do yet) allow a Gizmo # to be default forward. Using IPkall gives you a true US # which can be set as default and used to validate g.v. account. People who don't have a US # couldn't even forward to Gizmo until a default US land or mobile number was set.
As far as missed calls and sipdroid timing out, I believe it depends on how you are connecting. I haven't had any trouble with such issues while on 3g. In fact I use this as my only method of calling, and dropped down to just the data plan with my carrier. Before we got 3g where I live I would have similar problems on EDGE and WIFI networks. Try setting the minimum signal strength lower for the networks you will be using under advanced settings on sipdroid. Also be sure to use TCP rather than UDP. Required refresh time is alot longer with TCP and you will not get as many time-outs.
Another thing is it may very well be gizmo5 causing the timeout issue. I did miss a few calls and got alot more disconnects while I was testing to see if I could cut out a few legs of my forwarding scheme. Figured it would cut back on a little latancy, but It gave me issues so I switched back. Though Sipdroid supports any sip provider that uses the proper codecs, it is really designed to work well with PBXes. I have tried it with 4-5 providers and none worked as well as PBXes. Even gizmo5 worked better through PBXes than directly connecting from sipdroid.
Followed but Red light
sorry about that
ive gotten this setup correctly (i think), but i cannot get the pbxes->sipdroid part working.
if i call my ipkall number, i see the call register in sip2sip, and i see it in the history in pbxes.
sipdroid connects to pbxes fine, and the extension shows up as active. the call just never makes it to sipdroid
if i call from sipdroid OUT, i get a message that says please try again later and hangs up
maleman876 said:
ive gotten this setup correctly (i think), but i cannot get the pbxes->sipdroid part working.
if i call my ipkall number, i see the call register in sip2sip, and i see it in the history in pbxes.
sipdroid connects to pbxes fine, and the extension shows up as active. the call just never makes it to sipdroid
if i call from sipdroid OUT, i get a message that says please try again later and hangs up
Click to expand...
Click to collapse
I too get this same error my phone wont ring and then I recive an email that says i got a voice mail!!??
how to fix ths pls!!
(NEVERMIND I GOT IT WORKING NOW!!!!)
maleman876 said:
ive gotten this setup correctly (i think), but i cannot get the pbxes->sipdroid part working.
if i call my ipkall number, i see the call register in sip2sip, and i see it in the history in pbxes.
sipdroid connects to pbxes fine, and the extension shows up as active. the call just never makes it to sipdroid
Click to expand...
Click to collapse
There may be a problem with inbound routing settings. One thing you could try would be to skip sip2sip by forwarding ipkall directly to your pbxes extension. There are instructions on how to do this at pbxes. It works quite well. I will add this to the guide soon. I've just been a little busy lately.
if i call from sipdroid OUT, i get a message that says please try again later and hangs up
Click to expand...
Click to collapse
There are quite a few things that could cause this.
What type of call are you trying to make? (are you calling another sip# or a pstn#)
Which sip provider do you use for outbound calls?
Is your outbound route configured properly at pbxes?
I just let GV handle the outbound calls with callback. I have a sipdiscount account configured for outbound, but I don't really use it much. That's why I didn't cover it in the guide. I'll help as much as I can, but you might also want to check out the Sipdroid Primer. It explains alot about using sipdroid to place calls.
Pbxes webstie not working for me amy.one else getting this issue!?
Sipdroid+Gizmo+GV on Android
Hello,
First, thanks for your hard work enabling GV to work on an Android phone, like my unlocked G1 Dev Phone on AT&T EDGE in NYC.
I tried a different route, using Gizmo, Sipdroid, and GV. I set up GV to "use Google Voice for all calls", "call back" method, and WIFI and EDGE for connecting.
It all works just fine, calls to Canada are crystal clear, even away from WIFI on EDGE.
However, I just got my first wireless bill for this DATA ONLY phone (formerly a Blackberry), and was shocked that a 23-minute call to Canada cost me $16.00!
What happened?
Will your method fix the "free" nature of this system, is Gizmo the culprit here?
Please define how I should set up my data-only G1 to work properly with SIP, or do I just undo all the settings for Gizmo, and use the procedures you advise in your post?
Thank you!
if you use google voice....your not talking over the net...your talking over your cell line.
These instructions will explain how to get Sipdroid and Google Voice set up so you can use your Android phone with only WIFI or 3g/Edge. It also provides a solution to get Google Voice accounts validated for people who lack a US phome number.
Click to expand...
Click to collapse
so...follow the instructions
divinicus said:
However, I just got my first wireless bill for this DATA ONLY phone (formerly a Blackberry), and was shocked that a 23-minute call to Canada cost me $16.00!
What happened?
Thank you!
Click to expand...
Click to collapse
Sounds like your google voice also forwarded to your cell number. Make sure it's unchecked on their website under settings > phones. That would also explain why you got perfect calls even away from wifi/edge. You can be sure sipdroid is being used by the color of the call display. If it's a more blueish green it's a sip call. Regular green is cellular network.
OK guys sorry for the complete noobness ahead of time but I have no idea how this stuff works but I'm very interested in it. First of all my scenario is I'm going to be moving to the Philippines for nursing school next year and I want to keep in touch with my family while taking my unlocked G1 with me. I have a Google Voice number and a Gizmo5 account. I saw on the Gizmo5 site that I can't make calls for free but I can receive calls and talk as long as I like for free, I think... Say I'm receiving a call from the US when I'm in the Philippines and I answer. Are they dialing my SIP number or my GV number? And if they're calling my GV number are they being charged for standard domestic calling since it's a Houston #? Basically what I'm looking for is to use my Google Voice number and Gizmo5 account to talk to my family here for free while I'm in the Philippines without them being charged for long distance calls.
Could anyone help me out with this?
ThR1LL said:
OK guys sorry for the complete noobness ahead of time but I have no idea how this stuff works but I'm very interested in it. First of all my scenario is I'm going to be moving to the Philippines for nursing school next year and I want to keep in touch with my family while taking my unlocked G1 with me. I have a Google Voice number and a Gizmo5 account. I saw on the Gizmo5 site that I can't make calls for free but I can receive calls and talk as long as I like for free, I think... Say I'm receiving a call from the US when I'm in the Philippines and I answer. Are they dialing my SIP number or my GV number? And if they're calling my GV number are they being charged for standard domestic calling since it's a Houston #? Basically what I'm looking for is to use my Google Voice number and Gizmo5 account to talk to my family here for free while I'm in the Philippines without them being charged for long distance calls.
Click to expand...
Click to collapse
I set sipdroid up using gizmo5 and here's what I did
verify your gizmo through google voice then set google voice to forward incoming calls to your gizmo number
On the gizmo website you can set your google phone number as the outgoing ptsn just use the google voice tab and enter your gv # now all outgoing calls are free to any US #
Now setup your siddroid info username/password is gizmo username or phone # and your password
set your server to proxy01.sipphone.com
leave domain empty
port =5060
protocol = udp
and your done, now your friends, family can call your local number and it will forward all your calls to your phone anywhere with a internet connection and you can also make calls to any US number for free using the same connection
Hi:
Can I get back to using ipkall and pbxes in combo? It is not clear how to set this up. What exactly should I put in the 'SIP Phone Number' and 'SIP Proxy" fields?
hallevison said:
Hi:
Can I get back to using ipkall and pbxes in combo? It is not clear how to set this up. What exactly should I put in the 'SIP Phone Number' and 'SIP Proxy" fields?
Click to expand...
Click to collapse
Your sip phone number would be your pbxes extension
Example: gurnted-200
Sip Proxy would be: pbxes.com (.org works too but not as well)
On the gizmo website you can set your google phone number as the outgoing ptsn just use the google voice tab and enter your gv # now all outgoing calls are free to any US #
Click to expand...
Click to collapse
Does the time limit no longer apply for Gizmo outgoing? I stopped using them when I got 2 days of choppy calls (both on sipdroid and pc softphone) and havn't been back since. Have they changed it so out calls through Google Voice are unlimited? Also it uses udp which needs to refresh 10x as often. The developer of sipdroid says this causes excessive battery drain. How well is it working for you?
B-man007 said:
if you use gv....your not talking over the net...your talking over your cell line.
Click to expand...
Click to collapse
To clarify. If you use the "Google Voice" app developed by Google you are indeed using your cell line. However, if one uses the "GV" app developed by Evan Charlton you are able to set callback number to whatever you choose. By choosing IPKall # as callback and forwarding it to a sip account, calls are made over the net/data plan through Sipdroid.
Most people already know what google voice is about and how it works, but few may not know how to make free calls without using airtime or minutes.
Here's how to save $$$.
Make a call with Google voice and add the "outgoing number" (the number you see at the top of the call screen momentarily when connecting) to your Friends & Family List. Most cell providers have a name for a few reserved slots that you can add to your calling plan. AT&T calls it the A-List & TMO calls it Friends and Family.
Add that number to the list. You can add a forwarded line (like your office or home etc) to the A-List for incoming calls. Add your Google voice number also.
In the Google voice account go to Settings / Voice Settings / Calls Tab.
Google ID IN & Google ID Out should be checked to Display Google Voice Number.
You might give up the caller ID at a cost of making free calls that will show up as M2AN (A-List calls for AT&T) and another code for TMO on the bill.
In order for this to work, your calling plan has to support A-List or Friends and Family with an active data connection.
Big_O said:
Most people already know what google voice is about and how it works, but few may not know how to make free calls without using airtime or minutes.
Here's how to save $$$.
Make a call with Google voice and add the "outgoing number" (the number you see at the top of the call screen momentarily when connecting) to your Friends & Family List. Most cell providers have a name for a few reserved slots that you can add to your calling plan. AT&T calls it the A-List & TMO calls it Friends and Family.
Add that number to the list. You can add a forwarded line (like your office or home etc) to the A-List for incoming calls. Add your Google voice number also.
In the Google voice account go to Settings / Voice Settings / Calls Tab.
Google ID IN & Google ID Out should be checked to Display Google Voice Number.
You might give up the caller ID at a cost of making free calls that will show up as M2AN (A-List calls for AT&T) and another code for TMO on the bill.
In order for this to work, your calling plan has to support A-List or Friends and Family with an active data connection.
Click to expand...
Click to collapse
I thought this was eliminated due to the recent update in GV?
As long as you know the incoming numbers and outgoing numbers for GV, nobody is going to stop you from adding them to the A-List.
But the point of the original was that you would add one number and be able to call that one number and reach anyone you wanted. But now its no difference then adding any number to an A-list, right?
The original post is the same as the follow up. Add any numbers to the A-List especially google incoming and outgoing numbers then airtime won't be billed.
Sent from my Nexus One using XDA App
Big_O said:
The original post is the same as the follow up. Add any numbers to the A-List especially google incoming and outgoing numbers then airtime won't be billed.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Yeah I know what you meant, but I though google broke this in the newest update.
They did.
This method is over a year old. Next time search the forum before posting your out-dated "discovery".
Technically they broke it only for Google Voice. What makes Android so special is that someone else created a program, one of which is called "Google Voice Callback" that lets those of us who have a Fav 5 list still call everyone for free using Google Voice, even with the update.
TL;DR The trick still works, just use a program like Google Voice Callback (FREE in the Market)
Vonage for Facebook is free voip.
www.androidappjudge.com has a link to their site (shameless site plug)
Good F-grief. There's always some moron who has nothing better to do than flame posts. Not everybody in these forums has had this phone over a year. Of course this is old news jackazz, just wanted to help some of the newer guys since voip has been a current topic. I'm tired of A-holes flaming posts when somebody wants to help.
Sent from my Nexus One using XDA App
10000000x better idea:
Add your Google Voice number to your A-List / Friend and Family.
Go to www.google.com/voice on your phone.
Click a contact and call from there.
Ta-da. 100% free calls, no need to worry about all these other random numbers.
(Or just down-grade to 0.3.4 like I did since there's no benefit to the latest version anyway.)
Big_O said:
Good F-grief. There's always some moron who has nothing better to do than flame posts. Not everybody in these forums has had this phone over a year. Of course this is old news jackazz, just wanted to help some of the newer guys since voip has been a current topic. I'm tired of A-holes flaming posts when somebody wants to help.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I'm pretty sure he wasn't flaming. Just informing. Your post, on the other hand, was burning hot. Calm down, it's the internet.
kthanx
Paul22000 said:
10000000x better idea:
Add your Google Voice number to your A-List / Friend and Family.
Go to www.google.com/voice on your phone.
Click a contact and call from there.
Ta-da. 100% free calls, no need to worry about all these other random numbers.
(Or just down-grade to 0.3.4 like I did since there's no benefit to the latest version anyway.)
Click to expand...
Click to collapse
if you don't have myfave on your Tmobile plan like me use this here
obviously that is if you have magicjack
yozpalang said:
if you don't have myfave on your Tmobile plan like me use this here
obviously that is if you have magicjack
Click to expand...
Click to collapse
But doesn't MagicJack cost money?
Paul22000 said:
But doesn't MagicJack cost money?
Click to expand...
Click to collapse
Sorry my my bad but it is only $20 a year
Does this work in canada...
Sent from my Nexus One using XDA App
Sip calling?
There is another way to do it without the myfaves if you use sipdroid or another program similar. You have to set yourself up with a sip number, which is free on a couple of sites (using sipgate currently).
Then set up your Google Voice callback, this lets you select whether you want to use the wifi(or 3g) calling. For incoming calls you can also force them to go to your free number.
I'm sure there are some good tutorials around if you need more info.
I used Google Voice, Gizmo5, Sipdroid, and Google Voice Callback app to get free calls. Did this on my N1 before I got tmobile service, and was doing it all over wifi. It also works over 3g or wifi. The wifi route could be a great way to give your old phones that are collecting dust a new life, by making them SIP phones.
Here is a basic rundown of steps:
1) First get a gizmo5 account, I had one from before, but they stopped new users. If you want one then check out ebay, they are only $5-10. Once you have gizmo you will have a SIP number in that account which will be used in the next step.
2) Download sipdroid from the android market. Go to settings and click on the SIP Account Settings.
In the box for Authorization username put in you gizmo5 number (put a 1 before the number). In the box below labelled Password just put in your gizmo password. In the box labeled "Server or Proxy"
put in proxy01.sipphone.com . In username or caller ID box i put in gizmo number again with 1 in front (dont know if this is necessary, but mine is working with it in). For the box that says Port it should be set to 5060. Thats all you need to do for the SIP Account Settings.
Press back on the sipdroid app to get to the main settings page and select the Advanced Options. Click on "Use STUN Server" and enable it. For STUN Server name put in stun01.sipphone.com . Then for "STUN Server port put in 3478 .
3) Now just go to your google voice site on your computer and go to the Voice Settings. Under phones you need to add your gizmo number (no need to put 1 before the number) as a forward number (on the right there is also a drop down box, you need to select Gizmo as the type of phone). It will confirm dial to test the phone, your cell phone should ring now if you followed my exact steps.
4) For free outgoing calls download Google Voice Call Free app from the market (This is different than googles own voice app!). Simple put in your google sign in and password in the boxes. Then for Callback number put in your gizmo number (no need to put 1 before the number), on the drop down box select "Gizmo" as type of phone. Your done and now you have free calls incoming and outgoing.
smachine said:
I used Google Voice, Gizmo5, Sipdroid, and Google Voice Callback app to get free calls. Did this on my N1 before I got tmobile service, and was doing it all over wifi. It also works over 3g or wifi. The wifi route could be a great way to give your old phones that are collecting dust a new life, by making them SIP phones.
Here is a basic rundown of steps:
1) First get a gizmo5 account, I had one from before, but they stopped new users. If you want one then check out ebay, they are only $5-10. Once you have gizmo you will have a SIP number in that account which will be used in the next step.
2) Download sipdroid from the android market. Go to settings and click on the SIP Account Settings.
In the box for Authorization username put in you gizmo5 number (put a 1 before the number). In the box below labelled Password just put in your gizmo password. In the box labeled "Server or Proxy"
put in proxy01.sipphone.com . In username or caller ID box i put in gizmo number again with 1 in front (dont know if this is necessary, but mine is working with it in). For the box that says Port it should be set to 5060. Thats all you need to do for the SIP Account Settings.
Press back on the sipdroid app to get to the main settings page and select the Advanced Options. Click on "Use STUN Server" and enable it. For STUN Server name put in stun01.sipphone.com . Then for "STUN Server port put in 3478 .
3) Now just go to your google voice site on your computer and go to the Voice Settings. Under phones you need to add your gizmo number (no need to put 1 before the number) as a forward number (on the right there is also a drop down box, you need to select Gizmo as the type of phone). It will confirm dial to test the phone, your cell phone should ring now if you followed my exact steps.
4) For free outgoing calls download Google Voice Call Free app from the market (This is different than googles own voice app!). Simple put in your google sign in and password in the boxes. Then for Callback number put in your gizmo number (no need to put 1 before the number), on the drop down box select "Gizmo" as type of phone. Your done and now you have free calls incoming and outgoing.
Click to expand...
Click to collapse
This post inspired me to purchase a Gizmo5 account on eBay this afternoon.
After a few minutes, I had it all set up and BOOM, calling worked immediately!
Wow, so simple, I wish I had done this before!!!
Thanks!!!
(Word of note: for some reason it wouldn't authenticate on my work's wifi, but worked fine at home. After Googling around, it looks like certain security settings aren't compatible with SipDroid -- I'm guessing most likely it's due to SipDroid needing a random open port -- so your mileage may vary. At home of course, you can do whatever you want so there should be no issue.)
Paul22000 said:
This post inspired me to purchase a Gizmo5 account on eBay this afternoon.
After a few minutes, I had it all set up and BOOM, calling worked immediately!
Wow, so simple, I wish I had done this before!!!
Thanks!!!
(Word of note: for some reason it wouldn't authenticate on my work's wifi, but worked fine at home. After Googling around, it looks like certain security settings aren't compatible with SipDroid -- I'm guessing most likely it's due to SipDroid needing a random open port -- so your mileage may vary. At home of course, you can do whatever you want so there should be no issue.)
Click to expand...
Click to collapse
Glad this helped you out. I tried to explain each and every step so there was no room for error. I never ran into issues with wifi connections at home, starbucks, airports, hotels, but im guessing your work blocked alot of ports.
OK, I have been testing a few different sip providers since hearing gizmo5 is on life support and the plug being pulled in april...
Keep in mind that ANY sip provider can be used (you just need to know the credentials)
So for example, if you have at&t uverse voip telephone, then you can set it up on your nexus s (as well as your cable provider voip or magic jack)
I don't use those, so I can't tell you how to do it, but it is all the same...
instructions
-download sipdroid from the market
-run sipdroid and click "New PBX linked to my Google Voice"
-enter username and password (note if you already have a pbxes account delete it or choose a new username)
-delete/uninstall sipdroid (you no longer need it because gingerbread can do voip natively, you just needed it to configure your pbxes account)
-now go to your phone settings/ call settings/ accounts
add account
username- your name/nickname-200
password- check pbxes for password(same as pbxes under extensions-sipdroid<200>)
server- pbxes.org
[set as primary]
couple things to note- to receive incoming calls check the box, but as it says, battery life will be reduced
with cm7, "internet" calls can be placed over 3g...so using this option all your calls can be free* ...every thing goes through google voice
add "some" personal data so they realize it is not a "drone" account
advanced "not working for free accounts"
go to pbxes.org and sign up for a free account
after you finish entering and verifying log out and log back in
go to the left hand side and click extensions and "add extension" then "sip"
Add SIP Extension
Extension Number: 200
Display Name: your name (or nickname)
Webcall not used
URL: http://pbxes.org/
Text:
Image:
Latitude:
Longitude:
Device Options
password whatever you want
Voicemail & Directory: to link gv
voicemail password: google voice password
email address: [email protected]
email attachment: yes no
Play CID: yes no
Play Envelope: yes no
Play Next: yes no
Delete Vmail: yes no
vm options:
submit and save
NEXT
click on trunks, then add trunks and select sip
at the end of the URL it will have =SIP change this to =GTALK and hit enter (see below)
https://www2.pbxes.com/config.php?display=6&tech=GTALK
enter google username and password and save
Add inbound and outbound routing
Click to expand...
Click to collapse
gizmo R.I.P.
Ok it has been two days and no one has ported over the tmobile wifi calling apk so I decided to do some research and get the native wifi (internet) calling working
this is a tutorial that has been done before for the nexus one using sipdroid...but we don't need that app for the NS.
not only does it work very good, but you can also make unlimited free wifi calls with it using one extra step
1- you need to get a sip client, there are many out there (I tried a bunch with no success), so I ended up using gizmo5
(gizmo5 was just recently purchased by google and is not accepting new accounts, but you can buy a "unused" one on ebay for $8 give or take)
2-Log into https://my.gizmo5.com -> Change email -> Change password -> Write down your Sip Number and username
3-on you phone go to settings/call settings/(internet call settings at bottom)accounts/add account
4-username: Gizmo username
password: Gizmo password
server: proxy01.sipphone.com
set as primary account (check)
*optional settings all remain default
5-after you back out it will save the setting and verify the account you can check receive incoming calls (needed for connecting google voice) and how you "use internet calling" as well
thats it, add money to your gizmo account and make wifi calls within the US for 1c a minute (or international for sightly more)
for added convenience connect gizmo to your google voice (needed for free calls as well)
6-go to https://www.google.com/voice
go to Settings > Phones
click "Add another phone"
name: Gizmo
number: +1747(gizmo5 #)
phone type: Gizmo
*verify the number
for free outgoing calls one more step is needed..
7-go to the market and download "google voice callback free" (or donate version)
8-enter your gmail address and password
-enter callback number-"gizmo number"
-check auto-answer the callback
Thats it wifi calling! free if you want (my experience is the call quality is a little better when you are paying a penny a minute (btw thats $10 for 1000 mins...beat that cell provider!)
This is pure VoIP solution. It does not use any voice minutes. It does not incur any charges for incoming calls either. If you are on WiFi, this is a completely free solution.
for outging calls you will incur a small per minute VoIP charge from Gizmo. It costs a fraction of what most cell plans charge.
Click to expand...
Click to collapse
credits-jacksonj51, smachine, Paul22000, Dave's Tech Shop
yet another solution....
MotorcycleKopp
Junior Member
Join Date: Dec 2010
Location: Bakersfield, CA
Posts: 26
how to: DETAILED 100% FREE Wifi/VoIP calling set up
I decided to write up this EXTREMELY DETAILED “step by step guide for dummies” on how to set up everything you need WITHOUT HAVING TO PURCHASE ANYTHING (ie. a Gizmo5 account off ebay, or calling minutes/credits)” to be able to place AND receive calls COMPLETLY FREE using WiFi. I’ve noticed that there are quite a few people here that are pretty lost, in regards to setting up this really cool feature on their Nexus S.... so I hope that this detailed “how to” clears up most all of the confusion. Not to mention that this is a 100% TOTALLY FREE way to set this feature (where as the other “how to’s” require that you buy a Gizmo5 account if you don’t already have one).
All you need is:
- your Nexus S (or any other WiFi enabled phone, I guess).
- a FREE Sipgate account
- a FREE Google Voice account (which you should have already anyways).
- the “Google Voice Callback FREE” app (free).
1 - Go to Sipgate.com and sign up for the free account (this will give you free incoming calls)
2 - Once your done setting up your account, click on “settings”.
3 - Click on “Sip Credentials” on the right hand side of the page.
4 - All the information you need to enter into your phone will be here.
5 - Get your phone, turn on WiFi (if not already done so), & go into your phone’s “Settings” …then “Accounts” (under the Internet Call Settings).
6 - Click “Add Account”.
7 - For your username, enter the “SIP-ID” which is shown on the “Sip Credentials” page (see step 3 & 4 above) ****NOTE: this is NOT the user name that you chose when you signed up with Sipgate, this “username” is generated & chosen for you by Sipgate****.
8 - For your password, enter the “SIP-Password” which is shown on the “Sip Credentials” page (see step 3 & 4 above) ****NOTE: this is NOT the password that you chose when you signed up with Sipgate, this “password” is generated & chosen for you by Sipgate****.
9 - For your Server, enter “sipgate.com”.
10 - UN-CHECK the “Set as primary account” box (used for outbound calls)..... that is, unless you DON’T want to use the Google Voice Callback app to be able to place calls for free too (steps 14 &15 below).
11 - Press the “back” button on your phone (which will save the info), and CHECK the box that says “Receive incoming calls” (reduces battery life).
12 - Under “SIP accounts” (on the same screen, on your phone), you will see your username @sipgate.com, and underneath it, the status of your connection will be displayed. It should say “receiving calls” (which means that everything is set up right & you are ready to go!!).
13 - Go to your Google Voice account & add your new Sipgate phone number to your Google Voice account (I believe that you can chose whatever “phone type” you want from the dropdown box, except for Gizmo). Verify the number (you will receive your first FREE WiFi call, from Google Voice).
14 - Now open up your “Android Market” and search for “Google Voice Callback FREE”. Download & install it. Once installed, it will be titled “GVoice Callback” in your apps list.
15 - Set up GVoice Callback according to your own personal preferences. Just make sure that you select your new Sipgate phone number as the “Callback Number”. Also check the “Offical GV app compatibility” box. I also checked the “Auto-answer the callback” box (though I don’t think this is necessarily required).
16 - Finally, exit out of that & go back into your phone’s settings. Go to “Additional settings” and just make sure that the “Call waiting” box is checked.
17 - And you’re done!! You can now place AND receive FREE phone calls using WiFi (through your Google Voice number).
****NOTE: One thing that I’ve noticed is that GVoice Callback only works on 10-digit phone numbers -so just make sure that you’ve included the area code in the phone number of all your local contacts if you want to be able to call them using GVoice Callback****
****ADDITIONAL NOTE: If you have been connected to WiFi for a while, and are trying to make a WiFi call, but you aren't getting a call back from Google Voice (you are stuck on the screen that says "waiting for call back").... just go back into your phone, and go to: "Settings" then "Accounts" (under Internet call settings), and then UN-CHECK the "Receive incoming calls" box. Wait a second or two, and then RE-CHECK the box. Also, try turning off & then on again your GV Callback app. After toggling these two things off & then back on again, you should be able to make the call & be connected relatively quickly (within a couple seconds)****
****ONE MORE THING OF NOTE: It has become apparent that, at times, the party which you are calling will hear an echo of their own voice, when using this set up. Perhaps a different SIP provider will resolve this issue?? Either way, I hope that this guide at least clarifies the process of setting something like this up. If a better method (better SIP provider, etc) is found, be sure to let me know****
Click to expand...
Click to collapse
I was going to purchase a sipp account today but i had no money in my paypal tomorrow i will
Thaanks ! I just tried it and it works great.
Would it work also if we just ripped the T-Mobile apk from somewhere and installed it? This is a variant of UMA, correct?
Sent from my Nexus S
Wheres the sip phone icon? I have it set to only call for internet calls. In the google demos, it actually shows a second phone icon with "sip" written on it. Where is that? Only getting it to work if its set to choose everytime or always
Cool
10 characters
ogdobber said:
Ok it has been two days and no one has ported over the tmobile wifi calling apk so I decided to do some research and get the native wifi (internet) calling working
this is a tutorial that has been done before for the nexus one using sipdroid...but we don't need that app for the NS.
not only does it work very good, but you can also make unlimited free wifi calls with it using one extra step
1- you need to get a sip client, there are many out there (I tried a bunch with no success), so I ended up using gizmo5
(gizmo5 was just recently purchased by google and is not accepting new accounts, but you can buy a "unused" one on ebay for $8 give or take)
2-Log into https://my.gizmo5.com -> Change email -> Change password -> Write down your Sip Number and username
3-on you phone go to settings/call settings/(internet call settings at bottom)accounts/add account
4-username: Gizmo username
password: Gizmo password
server: proxy01.sipphone.com
set as primary account (check)
*optional settings all remain default
5-after you back out it will save the setting and verify the account you can check receive incoming calls and how you "use internet calling" as well
thats it, add money to your gizmo account and make wifi calls within the US for 1c a minute (or international for sightly more)
for added convenience connect gizmo to your google voice (needed for free calls as well)
6-go to https://www.google.com/voice
go to Settings > Phones
click "Add another phone"
name: Gizmo
number: +1747(gizmo5 #)
phone type: Gizmo
*verify the number
for free outgoing calls one more step is needed..
7-go to the market and download "google voice callback free" (or donate version)
8-enter your gmail address and password
-enter callback number-"gizmo number"
-check auto-answer the callback
Thats it wifi calling! free if you want (my experience is the call quality is a little better when you are paying a penny a minute (btw thats $10 for 1000 mins...beat that cell provider!)
This is pure VoIP solution. It does not use any voice minutes. It does not incur any charges for incoming calls either. If you are on WiFi, this is a completely free solution.
for outging calls you will incur a small per minute VoIP charge from Gizmo. It costs a fraction of what most cell plans charge.
credits-jacksonj51, smachine, Paul22000, Dave's Tech Shop
Click to expand...
Click to collapse
Oggs you have more moves than a chess board lol
JD
zachthemaster said:
Would it work also if we just ripped the T-Mobile apk from somewhere and installed it? This is a variant of UMA, correct?
Sent from my Nexus S
Click to expand...
Click to collapse
Think this could get figured out in the next 10 days? If not, I have to seriously consider taking this phone back. I don't get cell coverage at my house.
ugh....
I'm having issues linking my gizmo account with GV account. My Gizmo will ring, but GV will not accept the verification code - it keeps saying "sorry, I didin't catch that." Has anyone experienced similar issues?
zachthemaster said:
Would it work also if we just ripped the T-Mobile apk from somewhere and installed it? This is a variant of UMA, correct?
Sent from my Nexus S
Click to expand...
Click to collapse
the tmo apk won't work without a kernel that supports it, the lib files and a build prop mod...no, the tmobile uma client uses your cell minutes...this does not, it is pure voip
JupiterDroid said:
Oggs you have more moves than a chess board lol
JD
Click to expand...
Click to collapse
b84cops said:
Think this could get figured out in the next 10 days? If not, I have to seriously consider taking this phone back. I don't get cell coverage at my house.
ugh....
Click to expand...
Click to collapse
I was in the same boat, that is why I researched how to do this...now I am set. this is better than the tmobile app because it doesn't use your minutes
lithdoc said:
I'm having issues linking my gizmo account with GV account. My Gizmo will ring, but GV will not accept the verification code - it keeps saying "sorry, I didin't catch that." Has anyone experienced similar issues?
Click to expand...
Click to collapse
you are ahead of yourself... "turn off" all google voice on your phone and initiate the call from your desktop...then answer the gizmo call on your phone and enter the code (on your phone)...then turn on and adjust your gv settings
this is not a variant of UMA
lithdoc said:
I'm having issues linking my gizmo account with GV account. My Gizmo will ring, but GV will not accept the verification code - it keeps saying "sorry, I didin't catch that." Has anyone experienced similar issues?
Click to expand...
Click to collapse
I had to install the Gizmo5 client on my PC. Then when the Google voice verification call came in, there's a little down arrow at the top of the popup box. If you click that, you can open a text with "sound blasts" I think it was. There's a keyboard there, and if you click on the two numbers, GV will accept it.
Damn, seems like some of you guys are/were depending on this feature... It'd be nice, but I dont need it. Good luck to you all.
ogdobber said:
I was in the same boat, that is why I researched how to do this...now I am set. this is better than the tmobile app because it doesn't use your minutes
Click to expand...
Click to collapse
currently, i don't have a sip account. doesn't this still cost extra money to make happen? is there a cost per minute?
IDtheTarget said:
I had to install the Gizmo5 client on my PC. Then when the Google voice verification call came in, there's a little down arrow at the top of the popup box. If you click that, you can open a text with "sound blasts" I think it was. There's a keyboard there, and if you click on the two numbers, GV will accept it.
Click to expand...
Click to collapse
Well, I figured out what the issue actually was... I signed up for Gizmo some 5 years ago, but have not really used it. Anyway, they gave out 2 numbers - one SIP with 747 are code, the other with 775 (I don't know whether they still give those away). I had initially put in the 775, and while it would ring, it would not recognize my inputs. Once I changed it to 747, it all worked like a charm.
Hm, okay, so something is still not working. I followed the directions as listed in the first posting, but I still have no sucess making calls. It just says registered callback, waiting for google to call back, and it goes nowhere from there...
UPDATE: anyway, it seems to work when my gizmo app is open on the computer, but that's kinda useless, since I want to use the phone as the calling device. Any thoughts?
b84cops said:
currently, i don't have a sip account. doesn't this still cost extra money to make happen? is there a cost per minute?
Click to expand...
Click to collapse
see OP
+10 char
ogdobber said:
.... but you can also make unlimited free wifi calls with it using one extra step
....gizmo5 was just recently purchased by google and is not accepting new accounts, but you can buy a "unused" one on ebay for $8 give or take)
...thats it, add money to your gizmo account and make wifi calls within the US for 1c a minute (or international for sightly more)
Thats it wifi calling! free if you want (my experience is the call quality is a little better when you are paying a penny a minute (btw thats $10 for 1000 mins...beat that cell provider!)
This is pure VoIP solution. It does not use any voice minutes. It does not incur any charges for incoming calls either. If you are on WiFi, this is a completely free solution.
for outging calls you will incur a small per minute VoIP charge from Gizmo. It costs a fraction of what most cell plans charge.
Click to expand...
Click to collapse
does this change your phone number? i could never get this setup on the nexus 1, but is the addition of sip calling with gingerbread what makes this work?
lithdoc said:
Well, I figured out what the issue actually was... I signed up for Gizmo some 5 years ago, but have not really used it. Anyway, they gave out 2 numbers - one SIP with 747 are code, the other with 775 (I don't know whether they still give those away). I had initially put in the 775, and while it would ring, it would not recognize my inputs. Once I changed it to 747, it all worked like a charm.
Click to expand...
Click to collapse
You are lucky, gizmo stopped the 775 numbers a long time ago. It was supposed to be a back door to make free calls or have free incoming calls to your gizmo account. You have a valuable gizmo account
Does anyone know if this is a feature of gingerbread and will be available for other gingerbread phones?
Thanks.
robot_agenda said:
does this change your phone number? i could never get this setup on the nexus 1, but is the addition of sip calling with gingerbread what makes this work?
Click to expand...
Click to collapse
if you go (call) through your google voice then that shows up...if you you use straight up gizmo then that will show...All of my numbers forward to my google voice so it doesn't matter what number people call, my phone will still ring
I have been reading many posts on flashing roms and such to USA galaxy tablets that allow them to make calls. Ok, I understand that. What I want to know is how that all works out since no US plans have call minutes for our tablets. I am looking for specifics. Is this VOIP? or what? Second, Why only 2G if this mod is made?
For GSM tabs, you need to use a sim with voice and data.
Sent from my GT-P1000 using XDA App
Its VOIP. At least the ones I've seen. Made over wifi. Since there is no calling plan with minutes tied to the Tab it can't be a typical voice call. Sipdroid from the market with Google Voice accomplished this as well and is very easy to set up without root (I'm pretty sure). Just set up GV. Download sipdroid and before entering anything click on the bottom tab that says create with GV account. It will ask password and to create a pbx account and ow right in that screen. Then its done.
Its funny but if you try to select the dialer it says calls can't be made with Samsung Galaxy Tab. But if you select the box for a number the keyboard dialer pops up and allows you to type a number! Works great.
I just tried it over 3g with wifi off and works as well. Just select allow voice over 3g in your account tab.
This was showed to me and there is a thread on droidx forums
I realize this isn't 100% relevant to your thread, just thought I would point you to it if you were wanting to make calls on tab.
I have VZW tab. I have no idea on GSM
Sent from my SCH-I800 using XDA App
Mandelbrot.Benoit said:
Since there is no calling plan with minutes tied to the Tab it can't be a typical voice call.
Click to expand...
Click to collapse
All the provider cares about is the Sim card. So all you need is a sim with what you want, and then change/disable the IMEI of your tab.
I was able to set this up bit when I call my goog voice # from my wife's phone it still only rings my dumbphone. Do I need to add my tab number to Google voice somehow?
Mandelbrot.Benoit said:
Its VOIP. At least the ones I've seen. Made over wifi. Since there is no calling plan with minutes tied to the Tab it can't be a typical voice call. Sipdroid from the market with Google Voice accomplished this as well and is very easy to set up without root (I'm pretty sure). Just set up GV. Download sipdroid and before entering anything click on the bottom tab that says create with GV account. It will ask password and to create a pbx account and ow right in that screen. Then its done.
Its funny but if you try to select the dialer it says calls can't be made with Samsung Galaxy Tab. But if you select the box for a number the keyboard dialer pops up and allows you to type a number! Works great.
I just tried it over 3g with wifi off and works as well. Just select allow voice over 3g in your account tab.
This was showed to me and there is a thread on droidx forums
I realize this isn't 100% relevant to your thread, just thought I would point you to it if you were wanting to make calls on tab.
I have VZW tab. I have no idea on GSM
Sent from my SCH-I800 using XDA App
Click to expand...
Click to collapse
Sent from my Galaxy Tab using Tapatalk
Go to your Google account and select the voice icon. Settings in top right. Voice setting. Then at bottom select add another phone. I was able to add it, but cannot get it to verify. So I'm not sure if it can receive calls, just make.
And to the poster about the SIM card, I'm on VZW, no sim card or slot.
Sent from my SCH-I800 using XDA App
Mandelbrot.Benoit said:
And to the poster about the SIM card, I'm on VZW, no sim card or slot.
Sent from my SCH-I800 using XDA App
Click to expand...
Click to collapse
I was Quoting you to the OP.
Mandelbrot.Benoit said:
Its VOIP. At least the ones I've seen. Made over wifi. Since there is no calling plan with minutes tied to the Tab it can't be a typical voice call. Sipdroid from the market with Google Voice accomplished this as well and is very easy to set up without root (I'm pretty sure). Just set up GV. Download sipdroid and before entering anything click on the bottom tab that says create with GV account. It will ask password and to create a pbx account and ow right in that screen. Then its done.
Its funny but if you try to select the dialer it says calls can't be made with Samsung Galaxy Tab. But if you select the box for a number the keyboard dialer pops up and allows you to type a number! Works great.
I just tried it over 3g with wifi off and works as well. Just select allow voice over 3g in your account tab.
This was showed to me and there is a thread on droidx forums
I realize this isn't 100% relevant to your thread, just thought I would point you to it if you were wanting to make calls on tab.
I have VZW tab. I have no idea on GSM
Sent from my SCH-I800 using XDA App
Click to expand...
Click to collapse
For SIPDroid, does it do that annoying thing where it asks the receiving person to accept the call ? Or is it just like regular calling?
Does it do that call back thing?
If you install firmware that allows phone calls it works no different than any other Android phone. Pull the SIM out of your Android phone and insert into the Tab and viola you have a 7" Android phone that can make calls and browse the web. The easiest way to think about it is that the Tab is a big Android phone, the carrier's don't know any difference because it's running the same O/S as Samsung's Android phones.
*this is for intellectual purposes only. i'm not responsible if you break your TOS with Verizon, and so on and so forth.*
(this is based on google voice, which is US and (maybe canada?) only. i think the same process would work with another VOIP type account, so like if you pay for vonage, or something, you can create an extension on the pbxes.org site, and then follow the same steps, but putting in the VOIP info instead of the google voice info, for those of you who are rocking the big VZW internationally.
to make calls: (outbound)
1. if you don't already have a google voice account, get one.
2. download dialer one.
3.download sipdroid.
4. download the google voice apk (http://dl.dropbox.com/u/22394327/gv4232.apk)
5. go to google voice on the computer, and add your tab's 'phone number' (found under the about device->status->device number. it'll act like it needs to verify some stuff to work, but it doesn't, really.
6. go through the set up on your device. (keep repeating the set up, and eventually, it'll tell you that it can't configure voicemail.)
7. open sipdroid. at the bottom of the screen, there'll be a button that says 'link pbx to existing gv account'. hit that, and enter your password.
8. go to pbxes.org (on your computer) and log in with the username and password you just created.
9. click 'extensions'. choose the sip 200 link
10. change anything you need to change, like outbound caller ID or whatever.
11. open the settings in the sipdroid app
12. put the password in first, even though it's second on the list.
13. put in your username with a -200. so if your username is flamingo, you'd put in flamingo-200.
14. set it to use wlan only, or wlan and 3g, if you've got a decent dataplan.
15. exit out of settings
16. put in a phone number and hit enter.
17. enjoy having outgoing phone-call abilities on your Verizon Tab.
(as far as I know, you don't need root for any of this. I'm running a rooted, Better Than Life RC1 tab, so YMMV.)
ETA: inbound calling: (again, i think this is US and Canada only)
okay. now I have incoming calls on the google voice number. here's what i did.
1. go to https://secure.tpad.com/signup/ and sign up for a SIP number. it's free, near as i can tell. i didn't put in any billing information anywhere.
2. after you have your tpad SIP number, go to http://phone.ipkall.com/ and port your SIP number there, to get a free, us based phone number.
3. add that phone number to google voice.
4. open sipdroid on the phone, and select your second account option under settings.
5. put your tpad SIP number into the auth username part. put your password into the password part, and put sip.tpad.com as the server or proxy. leave everything else the same.
6. go back into google voice on the computer, and click verify.
7. answer your tab, and enter the verification code.
8. your SIP number now forwards to your ipkall number, which forwards to your google voice number, allowing you to get free incoming calls on your tab.
9. use your other device to call yourself, and feel clever. enjoy!
Interesting. I can make outbound calls..still trying to figure out the echo issue on the receiving side.
As far as inbound..I feel I have this partially working. My IPKall does forward to my google voice...but what number do people dial to reach me at my tab? the Tpad number is not a 10 digit number and if you try to call my google voice it goes to the tablet but does not appear to connect after I accept the call.
People call the google voice number. Make sure you don't have it set to go straight to voicemail or anything, in the google voice settings.
Swyped from my better than life galaxy tab
Cool. I will have to double check my settings and test again. Great post!
boodafli said:
People call the google voice number. Make sure you don't have it set to go straight to voicemail or anything, in the google voice settings.
Swyped from my better than life galaxy tab
Click to expand...
Click to collapse
I forgot to ask. Do you know a solution for the echo on the receiving end of the call. For example, I do not hear an echo but the receiver hears themselves echoing. I even tried adjusting the audio settings in SipDroid to all LOW. Just wondering if you found a workaround for this.
hmmm. i didn't have an echo. but i used a wired mic/headset thingy. maybe bluetooth would work too?
i have GSM tab , but i hitted the thanks button , just because you'll help alot cheers
nice guide\job again
I do not see the button at the bottom of sipdroid..
It should be there if you installed the google voice apk.
Swyped from my better than life galaxy tab
boodafli said:
It should be there if you installed the google voice apk.
Swyped from my better than life galaxy tab
Click to expand...
Click to collapse
stop thank me back
Very nice! Def going to have to try this out once my tab is running again.
Sent from my GT-P7510 using XDA Premium App
lol. i play fast and easy with the thanks button. i use it like the like button on fb.
boodafli said:
lol. i play fast and easy with the thanks button. i use it like the like button on fb.
Click to expand...
Click to collapse
Damit lol , then play with it as you like , lol
Sent from my GT-P1000 using Tapatalk
Tried it on my GTab today and got it working! Well outbound calls anyways, I haven't started on inbound yet awesome job on the write up!
yay! i'm glad it's working for you.
It does work indeed. The only issue i have found is that most of the time mz voice is super choppy to others but i can hear them.fine. I have sipdroid set to high qaulity...
Any other ideas?
Sent from my GT-P1000 using XDA Premium App
jphilpot said:
It does work indeed. The only issue i have found is that most of the time mz voice is super choppy to others but i can hear them.fine. I have sipdroid set to high qaulity...
Any other ideas?
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
if you're using the mic on the tab, quality is going to be fairly ****e. i don't think it's a high quality mic at all, just the bare bones for voice search/accessibility features, you know? i plugged in my OLD SCHOOL wired blackberry earphone/mic set, and that seemed to improve things.
So what does this get charged as for the airtime usage?
Date or Minutes?
I currently only pay $20/mo for 1GB...
Data.. And i think it is around 64kb
I would say about the same usage as streaming low qaulity music.
Sent from my GT-P1000 using XDA Premium App
Ill try that.
Sent from my GT-P1000 using XDA Premium App