Database Users

Need "original" Bell firmware for Odin

So, I have confirmed that the "sdcard" in my SGS is dead. Bell is happy to send it in for repair, but don't have an original Bell firmware on the phone anymore, and I'm concerned about warranty support.
The phone is unable to boot, so I can't use the Kies app at all.
I am able to flash no problem using Odin, but I don't have a source for an original Bell 2.1 ROM to use with Odin. All the stuff I can find has strange filenames (things that don't obviously go into the blanks in Odin).
I'm a relative noob (obviously), but if someone would give me a hand getting a 2.1 Bell FW flashed, I would really appreciate it.

go to sams firmware and download JH2
that's the original stock ROM for Bell

hey!
I am in need of these files too.
Could someone instruct this noobie on how to obtain these files?
My phone randomly softbricked after i listed to the music and i lost my recovery mode along with it (however, i got download still yay!)
I am somewhat familiar with Odin due to the youtube video and tampering with it, but i cant seem to locate the Bell vibrant files i need.
My computer is already updated with samsung drivers and is basically ready to go.

AllGamer said:
go to sams firmware and download JH2
that's the original stock ROM for Bell
Click to expand...
Click to collapse
You would'nt happend to know the password for this file eh?
I've tryed samfirmware, samfirmware.com but to no avail :|
Also, can I take an image of my current rom with Odin? Is it the "File Dump" option?

password is samsung-firmwares.com

i'm looking for the original firmware of vodafone germany..
anyone out there who knows where to get it?
on my phone is:
pda: i9000bujm4
phone: i9000bujm3
csc: i9000gvd2jm3
but i've done an update via kies. so i'm searching for the previous version..

steinii said:
i'm looking for the original firmware of vodafone germany..
anyone out there who knows where to get it?
on my phone is:
pda: i9000bujm4
phone: i9000bujm3
csc: i9000gvd2jm3
but i've done an update via kies. so i'm searching for the previous version..
Click to expand...
Click to collapse
Hi german cousine!!
I looking for an original vodafone rom similar to your.
PDA: i9000bujm4
PHONE: i9000bujm3
CSC: i9000gomnjm4
Can, someone of you guys, help me?
(actually this brand rom is a 2.1 android).
Thanks

need help please

I want to install a solid firmware and use darky rom 9.5. I dont have an idea how to do it though. Can someone advise me on the following;
Best firmware to download
what to put in
PDA:
Phone:
Modem:
And how to install darky rom?

in the first post of darky's ROM thread there are 2 links, labeled as [GUIDE* I recommend to read that.
direct link to the thread

JVB based Rom Froyo Modem

can anybody shed some light on mt problem.
i have installed every Gb custom Rom on here all based on JVB with JVK modem.
but i can not for the life of me get a GPS fix.
i have tried JQ1 and JVE but still no Joy.
i did have this problem on insanity 7.2 but was able to flash a Modem_BUJP5-CWM.zip and that was the best working modem for my sgs.
on this new gb based rom CWM reports back an error and that the script was removed.
if so can i flash a modem via udin onto GB based JVb rom or is there another way to flash a froyo modem on to GB.
or another way to get my gps working.
regards

You can easily use a Froyo modem and flash the modem.bin file in phone in Odin.

what is the best modem for 3g ?

I uess you need a modem file for your region. What region are you in?

ragin said:
I uess you need a modem file for your region. What region are you in?
Click to expand...
Click to collapse
saudi arabia

NEED Bell Canada Modem and CSC

I would like to use the ROM kitchen to generate my ROM, but it seems to be missing a few things is used to have. I don't mind flashing them after or somehow adding it to the ROM before flash.
I still have froyo and want to upgrade to gingerbread. I have a Bell Canada SGS and need the following.
1.) Bell Canada Gingerbead Modem
2.) Bell CSC (kitchen only has europe/other regions)
3.) Altered Phone.apk - one that does NOT have the increasing ringtone. By the time i start to hear it it always to late, if i set my ringer volume level to 8 i want it to start at 8 and end at 8.
From what i know modem and phone.apk can be flashed after via CWM or Odin, but how do you flash CSC?

You can flash csc and modem through Odin, just make sure you use the files from the right ROM. If you have a Bell Vibrant, use the Gingerbread 2.3.3 UGKG3 stock firmware.

any links for CSC that is already extracted? I found the modem.
Just put the CSC.bin under CSC and flash??

alright so i download stock Bell firmware and generated a ROM file in the kitched. Deleted the modem and CSC and replaced it with the ones from the Bell ROM.
Now i just need a Phone.apk for the ringing problem.

What firmware are you using? I'm on JVR firmware with UGKG3 CSC and modem and I'm using the non-increasing ring mod for phone.apk as well.
If you're on JVR odexed, then this should work: http://forum.xda-developers.com/showpost.php?p=16295257&postcount=23
If you're on JVR deodexed, then use this instead: http://forum.xda-developers.com/showpost.php?p=16257034&postcount=20
For other Gingerbread versions, you'll have to look around the forums since I haven't searched for them myself, but they should be around

well i'm generating a rom from the kitchen and this will be gingerbread. The kitchen uses JVT, no idea about odexed or deodexed

question.. im on stock ugkg3 (rooted and unlocked) with bell but i just simply want to put a 2.3.4 or 2.3.5 firmware and nothing else. Which one works best with bell and how can i just simply flash a firmware only. I just want better battery life and get rid of that scrolling issue while browsing.
TY.

Although I personally use CM7 stable and MIUI ROMS exclusively, I have previously used Darky and S.U.R.F.A.C.E ROMS as well. I would recommend S.U.R.F.A.C.E since its light and you can decide what bloatware packs to add. Good battery life too. Either way, I always flash the UGKG3 modem for 850 bands.
Sent from my GT-I9000 using XDA App

I use UGKG3 modem as well. I'm on TELUS

GDF01 said:
question.. im on stock ugkg3 (rooted and unlocked) with bell but i just simply want to put a 2.3.4 or 2.3.5 firmware and nothing else. Which one works best with bell and how can i just simply flash a firmware only. I just want better battery life and get rid of that scrolling issue while browsing.
TY.
Click to expand...
Click to collapse
jvt works very well with KG3 modem and csc
just use odin to flash stock jvt as your pda

lgsshedden said:
jvt works very well with KG3 modem and csc
just use odin to flash stock jvt as your pda
Click to expand...
Click to collapse
Thanks, thats exactly what i did. Had a few phone FC but other than that,works pretty good.

[Q] Galaxy Note Indian Firmware?

Still haunting for Indian Stock Galaxy Note Firmware...A screen Shot is attach for better understanding.
Image of system information on Purchase...and after purchase...a minor update (KJ9 kernel to KK3 Kernel) are attached for ref.
I updated to KK3 and then rooted and flashed KK1 CF-Root and taken CWM backup.
How could I go back to pure stock. In case I recover from back up ( after all efc and CSC restore using root explorer [backed up earlier]) it will go back to stock however the kernel info will be different...Hope I make devs understand the issue.
There in no where Indian stock firmware available or even CF-Root thread there is no Kj9 or KK3.

You hav backedup after CF root, your backup alreadt contains Root and CF kernel.
Cf root KK1 is same as KK3, as already you have done this.
To go completely back to original stock, you have to follow same procedure by which you hav injected CF kernel. First of all you need is original kernel (i dont know wether available at present) extract that original kernel, get zImage file and CFrootflash, like you did it earlier. Now you have stock firmware n Root
Use zergrush unroot tool to unroot device, then only you will get complete original stock firmware
Read this for further detail
http://forum.xda-developers.com/showthread.php?t=1329360

Thanks...I understand the process you mentioned. The only point here is that nowher I have found KJ9 or KK3 ( Original Indian Stock Kernel )...!!!

KJ9 is old, look for KK1 if you get, once you get kk1 again you can update over OTA to get KK3

Added: 2011-11-30 13:04:14
Model: GT-N7000
Product Code: GT-N7000ZBAINU
Modified: 2011-11-04
HIDSWVER: N7000XXKK3/N7000ODDKK1/N7000DDKJ3/N7000XXKK3
Filename: GT-N7000_INU_1_20111104175945.zip.enc2
CRC: 2734158581
now indian FW firmware is available in samsung server..........i just downloaded it ,file size is 557mb and i'm unable to upload it
u can use checkfusdownlader.exe to download urself(it will also decrypt tha FW file)

Great news....let me check...Ill get back. Thanks all who has read this thread and responded. Ill come back after checking and let you know the outcome (my success story!)
Sent from my GT-N7000 using xda premium

Confirmed, it has just become available, i have checked at around 7pm, it was not available. But right now it is there

how to know if a firmware is available or not ? is there any site for it official samsung

link
now available at samfirmware also,credit to them
http://www.hotfile.com/dl/136370893/6d2a726/N7000XXKK3_N7000ODDKK1_INU.zip.html
pwd:samfirmware.com

N7000XXKK3:
PDA: N7000XXKK3
Phone: N7000DDKJ3
CSC: N7000ODDKK1
Android 2.3.5
Download:
Here
Pass: sampro.pl

YES!!!...........the purpose of this thread is SOLVED!!!.........Indian Stock Firmware is available now...I pressed Thanks button to all who has responded. Thanks XDA

good post thanks