Related
I installed the Wildpuzzle v8 ... and then i installed SetCPU from this forum ... and i am not able to set the max past 528mhz ... i thought it must be something wrong with the custom rom .. ive even tried cynogenmod bt no luck there either ...
I believe its something to do with installing a custom kernel ... but i have no clue how to work with that ... If any one can please help me with that ... I am new to the android world ... and i want to overclock my wildfire ...
Thanks in advance ... tc
If you are using WildPuzzle, flash the overclockable kernel. (The file name starts with 0130 under kernels).
Once you flash it, OC'ing is enabled, and you will be able to OC till 768 Mhz.
Flashing a kernel is the same as flashing a Custom ROM. Reboot into Recovery > Install Zip from SDC, Select the Kernel ZIP. Remember to take a nandroid backup beforehand though.
Good Luck
Install the Jacob's kernal.
Just flash it like ROM thru the recovery without flashing. I recommend a nandroid backup first in case something goes wrong.
Dont forget to hit the thanks button if it was helpful to you.
3xeno said:
If you are using WildPuzzle, flash the overclockable kernel. (The file name starts with 0130 under kernels).
Once you flash it, OC'ing is enabled, and you will be able to OC till 768 Mhz.
Flashing a kernel is the same as flashing a Custom ROM. Reboot into Recovery > Install Zip from SDC, Select the Kernel ZIP. Remember to take a nandroid backup beforehand though.
Good Luck
Click to expand...
Click to collapse
Thanks for the reply ... one more help if u can ... can u give me a link to the kernel ... actually the one i was thinking about was 0159_691mhz_cpu_speed_v1 ... will it do the job ??
nlovers2000 said:
Install the Jacob's kernal.
Just flash it like ROM thru the recovery without flashing. I recommend a nandroid backup first in case something goes wrong.
Dont forget to hit the thanks button if it was helpful to you.
Click to expand...
Click to collapse
COnfusion ... wat do u mean by .... Just "flash" it like ROM thru the recovery "without flashing"
xyzisahero said:
Thanks for the reply ... one more help if u can ... can u give me a link to the kernel ... actually the one i was thinking about was 0159_691mhz_cpu_speed_v1 ... will it do the job ??
Click to expand...
Click to collapse
Don't flash that package, it's just a speed setting. First, you need to flash this
http://rom.tat.tw/wildfire/wildpuzzlerom/2.2/patches/0130_kernel_overclock_jacob_2.6.32_v1.zip
(3rd kernel of KERNELS title in Wildpuzzle 0.8 post)
xyzisahero said:
COnfusion ... wat do u mean by .... Just "flash" it like ROM thru the recovery "without flashing"
Click to expand...
Click to collapse
Flash it over the ROM, without wiping or reflashing the rom. Just flash it without doing nothing before or afterm and reboot.
xyzisahero said:
Thanks for the reply ... one more help if u can ... can u give me a link to the kernel ... actually the one i was thinking about was 0159_691mhz_cpu_speed_v1 ... will it do the job ??
Click to expand...
Click to collapse
This one:
0130_kernel_overclock_jacob_2.6.32_v1.zip
0159 will also do (You will STILL need to flash 0130 before that). It will preset the CPU Speed to 691. Personally, I prefer flashing the OC'ed kernel, and, setting my own speeds and profiles through SetCPU. But, it is upto you.
Flashing a faster predefined speed than the default 528mhz, I prefer 652mhz file, helps with the booting process complete smoother.. less waiting time to load up desktop. That's what I find anyway... used to wait ages until setcpu kicks in.
Sent from my HTC Wildfire using XDA App
if you use the 130 kernel with wildpuzzle, the wifi hotspot won't work, it will be visible but won't connect, if you flash 055 overclocking kernel from wildpuzzle 8.0.11 thread then wifi hotspot is all good
strongly reccomend HCDR Jacobs Kernel v4.1 its the bees knees haha
flash taht and your good to go
high - 691200
low - 25800
ephbee said:
if you use the 130 kernel with wildpuzzle, the wifi hotspot won't work, it will be visible but won't connect, if you flash 055 overclocking kernel from wildpuzzle 8.0.11 thread then wifi hotspot is all good
Click to expand...
Click to collapse
Oh !! nw ive already flashd the 130 kernel ... what steps shd i follow to flash HCDR Jacobs Kernel v4.1 ... or the 055 kernel
3xeno said:
0159 will also do (You will STILL need to flash 0130 before that). It will preset the CPU Speed to 691. Personally, I prefer flashing the OC'ed kernel, and, setting my own speeds and profiles through SetCPU. But, it is upto you.
Click to expand...
Click to collapse
One more thing .. as i was told flashing the 0130 kernel would help me in setting up a predifine values through setCPU... after flashing the 0130 .. i still cudnt set my speed more than 528 ... then i flashd the predifnd 691mhz kernel ... nw atleast the setcpu widget shows my max 691 nd min 254 .... :/
xyzisahero said:
One more thing .. as i was told flashing the 0130 kernel would help me in setting up a predifine values through setCPU... after flashing the 0130 .. i still cudnt set my speed more than 528 ... then i flashd the predifnd 691mhz kernel ... nw atleast the setcpu widget shows my max 691 nd min 254 .... :/
Click to expand...
Click to collapse
130 works fine, and if anything got a slightly higher linpack score than 055 as i tested both, it just wouldn't work with wifi hotspot.
i have only ever used set cpu.
to flash 055 i restored nandroid backup i did before overclocking with 130 and then flashed 055.
Flashing CM7 nightly #19 would resolve issues. Also i didn't heard anyone complaining about this on CM7 thread. Please be sure to follow exactly the steps for installing CM7 including wipe and format /system.
CM7 #19 is OC'able by defaul, u only have to install SETcpu.
#19 is pretty stable.
Hey,
I see a lot of people using CM7 is this really the best one?
Also till how many mhz I can overclock on that one?
Yes Cm7 IS really great, in fact you can customize almost everything, and I really like that feature...
As for overclocking you can overclock I think to max of 768mhz(if I'm wrong somebody please correct me)...maybe you can a little bit more but I think it is kernel related...
Hope it helps,
Best regards
Sent from my HTC Wildfire using XDA App
Irrespective of which ROM you choose, it is the kernel which allows (or disallows) you from Overclocking. Till date, there are 2 primary kernels which are available - HCDR.Kernel by Jacob and nFinity by arco, and both OC support upto 768MHz. (I think Deep-Knight has recently developed a new kernel for his ROM, which allows OC upto 600MHz)
Because of this, you can overclock your stock ROM also, if you so wish, by simply flashing a custom kernel.
3xeno said:
Irrespective of which ROM you choose, it is the kernel which allows (or disallows) you from Overclocking. Till date, there are 2 primary kernels which are available - HCDR.Kernel by Jacob and nFinity by arco, and both OC support upto 768MHz. (I think Deep-Knight has recently developed a new kernel for his ROM, which allows OC upto 600MHz)
Because of this, you can overclock your stock ROM also, if you so wish, by simply flashing a custom kernel.
Click to expand...
Click to collapse
Hi!
Which kernels can I use for original rom, if I want to overclock? HCDR, or Deep, or what? It will make the phone instable, or not?
Thank You!
zigee said:
Hi!
Which kernels can I use for original rom, if I want to overclock? HCDR, or Deep, or what? It will make the phone instable, or not?
Thank You!
Click to expand...
Click to collapse
You can use any. nFinity MC4 offers more features though, like Smartass Governor. It can be found here:
http://forum.xda-developers.com/showthread.php?t=995301
Else, you can use HCDR Kernel also, if you wish, and decide for yourself which suits you:
http://forum.xda-developers.com/showthread.php?t=798471
It shouldn't make the phone unstable at all. But, in any case, make a Nandroid Backup beforehand.
Thank You
Well M using hell fire .. Cm7 based ....
Which is stable till 729 Mhz overclock m using max 729 and min 490 (I guess)
Phone is Much faster than before and love playing angry birds
I read all the 2 posts, but Im not sure to change the original slow kernel, for a faster. All have some bugs, battery life, wifi, etc...
I dont know, which could be better for the stock rom, or which could be better than the original.
Anyway, I want to try one of that, but I dont know which.
How can I flash just the kernel? And also back up my programs with titanium, or mybackup?
It clears everything like the rom flashing?
Ok, I made it, its cool, and faster. Thanks for the help.
is the overclocking "app" in standard cm7? Or i must go to market or anything else to download it?
Adria1234 said:
is the overclocking "app" in standard cm7? Or i must go to market or anything else to download it?
Click to expand...
Click to collapse
Its standard, under Settings > Cyanogenmod Settings > Performance Settings.
so here is the thing i found this forum because i was looking for a way to overclock my G3 so my games wouldn't lag anymore .... i flashed kyrillos 7.0 non-oc rom and then i fleshed fugumod kernel installed Setcpu and now my phone is running on 800 MHz max i downloaded ninja jump and pes and my phone is still lagging when i play them did i do all this for nothing is there some way ???
Shadowmaniac said:
so here is the thing i found this forum because i was looking for a way to overclock my G3 so my games wouldn't lag anymore .... i flashed kyrillos 7.0 non-oc rom and then i fleshed fugumod kernel installed Setcpu and now my phone is running on 800 MHz max i downloaded ninja jump and pes and my phone is still lagging when i play them did i do all this for nothing is there some way ???
Click to expand...
Click to collapse
I would suggest, since you are already running 7.0, check the link Kyrillos ROM v7.1 and update your ROM to v7.1 (its so much better, though optional), post that Flash G3Mod v 1.6 Kernel.
Then using Set CPU you can OC more than 800 Mhz.
Note : Dont forget to read the instructions carefully for Kyrillos 7.1 ROM, G3Mod Kernel and SetCPU.....remember, you do all this at your own risk..check my signature for my stats...
umangsagar said:
I would suggest, since you are already running 7.0, check the link Kyrillos ROM v7.1 and update your ROM to v7.1 (its so much better, though optional), post that Flash G3Mod v 1.6 Kernel.
Then using Set CPU you can OC more than 800 Mhz.
Note : Dont forget to read the instructions carefully for Kyrillos 7.1 ROM, G3Mod Kernel and SetCPU.....remember, you do all this at your own risk..check my signature for my stats...
Click to expand...
Click to collapse
1.i have kyrillos 7.0 non-oc so i dont know if i can upgrade to 7.1
2.i had G3mod v 1.6 but my phone freezed after 3 min of using it so i flashed fugumod
3.i dont want to overclock more then 800 MHz because i dont want my phone to die
Shadowmaniac said:
1.i have kyrillos 7.0 non-oc so i dont know if i can upgrade to 7.1
2.i had G3mod v 1.6 but my phone freezed after 3 min of using it so i flashed fugumod
3.i dont want to overclock more then 800 MHz because i dont want my phone to die
Click to expand...
Click to collapse
Go to 7.1 link given above, and save the file in your SD Card and rename it as update.zip
Then from CWM recovery, install it and you would have 7.1 (read the link, you got to have 7.0 installed to install 7.1, which u already have)
2ndly as far as OC goes, no one would want to have their cell die..my question is Do you guarantee that OC at 800 Mhz will not make ur phone dead? (just a food for thought, dont make this bug you )
What i normally do is, using SetCPU i OC only while playing game..i normally keep it as 600-1200 MHz, on demand.....after I am done...i set it back to 200-800 Mhz on demand...and I normally play for a couple of hours at stretch...nothing has happened to my phone so far...but at the same time, I know when you run at max speed, you are bound to tire early....decide what you want more
umangsagar said:
Go to 7.1 link given above, and save the file in your SD Card and rename it as update.zip
Then from CWM recovery, install it and you would have 7.1 (read the link, you got to have 7.0 installed to install 7.1, which u already have)
2ndly as far as OC goes, no one would want to have their cell die..my question is Do you guarantee that OC at 800 Mhz will not make ur phone dead? (just a food for thought, dont make this bug you )
What i normally do is, using SetCPU i OC only while playing game..i normally keep it as 600-1200 MHz, on demand.....after I am done...i set it back to 200-800 Mhz on demand...and I normally play for a couple of hours at stretch...nothing has happened to my phone so far...but at the same time, I know when you run at max speed, you are bound to tire early....decide what you want more
Click to expand...
Click to collapse
a friend told me that 7.1 isn't that diffrent from 7.0 so i don't think i will update
maybe u can try set it on performance that always helps a bit for me but i dont know
Shadowmaniac said:
a friend told me that 7.1 isn't that diffrent from 7.0 so i don't think i will update
Click to expand...
Click to collapse
I am surprised...you sure have not visited the link for 7.1 and read the changelog for what all has been updated vis-a-vis 7.0.(though as stated in my 1st post to you above, it is optional, what you need to decide is whether to have a Kernel which lets you to overclock, if at all you intend to overclock at higher values.)....have what suits you cheers mate.
umangsagar said:
I am surprised...you sure have not visited the link for 7.1 and read the changelog for what all has been updated vis-a-vis 7.0.(though as stated in my 1st post to you above, it is optional, what you need to decide is whether to have a Kernel which lets you to overclock, if at all you intend to overclock at higher values.)....have what suits you cheers mate.
Click to expand...
Click to collapse
ok i will see then
umangsagar said:
Go to 7.1 link given above, and save the file in your SD Card and rename it as update.zip
Then from CWM recovery, install it and you would have 7.1 (read the link, you got to have 7.0 installed to install 7.1, which u already have)
Click to expand...
Click to collapse
thx for this help !
I'm looking forward to do this update (didn't know it was possible with that zip)
Some Q:
- Will it keep all installs, settings and apps as they are now? (I have K7.0-OC)
- I have G3-1.7 (looking forward to the battery fix), won't it harm this kernel or will of flash the fugumod again? (and do I need to reflash afterwards?)
- I have ext4 with many installs, won't it be damaged after updating?
- I don't have a swap, is it needed? Does it make a difference? (in the g3mod app I've set all to ext4, does this move the swap to ext4? It's 500Mb and half used by now...)
I wouldn't want to ruïn my system now, since it's finally running (not always smooth, dough...)
I suggest using fugumod ultra as that has an OCed bus so games wont lagg.
Sent from my GT-I5800 using XDA App
Godyn said:
thx for this help ! [\QUOTE]
I'm looking forward to do this update (didn't know it was possible with that zip)
Some Q:
- Will it keep all installs, settings and apps as they are now? (I have K7.0-OC) It will wipe, you can take backup with Titanium and then later after installing 7.1 you can restore it.
- I have G3-1.7 (looking forward to the battery fix), won't it harm this kernel or will of flash the fugumod again? (and do I need to reflash afterwards?) You can flash the Kernel later, any Kernel of your choice.
- I have ext4 with many installs, won't it be damaged after updating? I dont think it will change your file system.
- I don't have a swap, is it needed? Does it make a difference? (in the g3mod app I've set all to ext4, does this move the swap to ext4? It's 500Mb and half used by now...) SWAP is used as a temporary memory, it is only optional, so choice is yours, I had it in past, right now, i dont have it on my configuration.
I wouldn't want to ruïn my system now, since it's finally running (not always smooth, dough...)
If its not running smooth, why do you worry about not ruining it, you can try various things on the forum, and you will have finally known, what to keep and what not to!
Others will give their views too here so you would know.
Click to expand...
Click to collapse
umangsagar said:
Godyn said:
thx for this help ! [\QUOTE]
I'm looking forward to do this update (didn't know it was possible with that zip)
Some Q:
- Will it keep all installs, settings and apps as they are now? (I have K7.0-OC) It will wipe, you can take backup with Titanium and then later after installing 7.1 you can restore it.
- I have G3-1.7 (looking forward to the battery fix), won't it harm this kernel or will of flash the fugumod again? (and do I need to reflash afterwards?) You can flash the Kernel later, any Kernel of your choice.
- I have ext4 with many installs, won't it be damaged after updating? I dont think it will change your file system.
- I don't have a swap, is it needed? Does it make a difference? (in the g3mod app I've set all to ext4, does this move the swap to ext4? It's 500Mb and half used by now...) SWAP is used as a temporary memory, it is only optional, so choice is yours, I had it in past, right now, i dont have it on my configuration.
I wouldn't want to ruïn my system now, since it's finally running (not always smooth, dough...)
If its not running smooth, why do you worry about not ruining it, you can try various things on the forum, and you will have finally known, what to keep and what not to!
Others will give their views too here so you would know.
Click to expand...
Click to collapse
Thx for your help ! Much appreciated
I installed, but it didn't ask for wiping (do I HAVE to do it manualy, because it's better not of course, now that I have everything installed.)
Also, I think it makes my phone slower :-/
Or would the wipe help???
umangsagar said:
Godyn said:
thx mate
I've tried it
it doesn't make my phone faster, from 396 to 409 in the benchmark.
Probably it's the SD card?
Click to expand...
Click to collapse
Dont worry about the quadrant score, its misleading.
You can get a higher quadrant score by some tweaks, but more importantly.
See if your phone is more responsive, much faster, no lags, no freezes. If it is there, quadrant doesnt matter.
Click to expand...
Click to collapse
I did the SU terminal supercharger settings, I tried the multitasking, but the rest is to technical for me.
Any suggestions?
Click to expand...
Click to collapse
Godyn said:
umangsagar said:
Thx for your help ! Much appreciated
I installed, but it didn't ask for wiping (do I HAVE to do it manualy, because it's better not of course, now that I have everything installed.)
Also, I think it makes my phone slower :-/
Or would the wipe help???
I did the SU terminal supercharger settings, I tried the multitasking, but the rest is to technical for me.
Any suggestions?
Click to expand...
Click to collapse
Brother, it does not ask for wiping, you have to do it manually...Also Supercharger doesnt work for me however lagfix does, but again I would say more than quadrant score, you should be concerned about the performance of the phone and responsiveness.
Click to expand...
Click to collapse
please guys i dont know is it normal or not so let me know that why does it always gets stuck on 3d tests while performing any benchmark using any of the overclocked versions gl notecore kernel. I really like that kernel but also do want some overclocking but whenever i try doing benchmark test using the extreme versions it gets stuck on the earth and moon rotation animation-testing screen and on antutu on the screen where battalion army animation is shown.
I have tried v2, v4, v5 v6 and till v8 extreme versions(overclocked) of gl notecore kernel. Tried and tested on rocket rom v7, kindroid v4.2 v4 3 and v5.1.1 also on latest and greatest clean note v4 but everytime it got stuck. It never happened to me on overclocked franco's kernel r5 nor did it ever happened on any cm9 or aokp roms while running anidroid kernel. So guys if you can help me out your help would be really appreciated
Thanks in advance.
I guess it's your device because I have used both benchmarks with gl notecore extreme and everything went all right.
I'm using v8 with criskelo's rom v10
i dont think so
perri.etb said:
I guess it's your device because I have used both benchmarks with gl notecore extreme and everything went all right.
I'm using v8 with criskelo's rom v10
Click to expand...
Click to collapse
Even i thought so at first but then why does other overclocking kernel work then and also once in the blue moon the overclocked gl notecore had worked suddenly but since then it has not. Please someone help me out.
Husson_Ally said:
please guys i dont know is it normal or not so let me know that why does it always gets stuck on 3d tests while performing any benchmark using any of the overclocked versions gl notecore kernel. I really like that kernel but also do want some overclocking but whenever i try doing benchmark test using the extreme versions it gets stuck on the earth and moon rotation animation-testing screen and on antutu on the screen where battalion army animation is shown.
I have tried v2, v4, v5 v6 and till v8 extreme versions(overclocked) of gl notecore kernel. Tried and tested on rocket rom v7, kindroid v4.2 v4 3 and v5.1.1 also on latest and greatest clean note v4 but everytime it got stuck. It never happened to me on overclocked franco's kernel r5 nor did it ever happened on any cm9 or aokp roms while running anidroid kernel. So guys if you can help me out your help would be really appreciated
Thanks in advance.
Click to expand...
Click to collapse
Delete ypur init.d folder....
I face this similar issue. May be the EX version is not for us.
lifehijack said:
I face this similar issue. May be the EX version is not for us.
Click to expand...
Click to collapse
For me it is, just use his rom. No tweaks that will conflict his kernel. Using now his rom and his beta 8.2 at full speed.
Not a single sod ore freez. Antutu 7300, quadrant 5300.
Please if you use a custom rom, delete all init.d. Those are his words. You can find it in system,etc,init.d
i tried it all
androiadicted said:
Delete ypur init.d folder....
Click to expand...
Click to collapse
Yes i already checked for that folder in system/etc but i cant locate one.
androiadicted said:
For me it is, just use his rom. No tweaks that will conflict his kernel. Using now his rom and his beta 8.2 at full speed.
Not a single sod ore freez. Antutu 7300, quadrant 5300.
Please if you use a custom rom, delete all init.d. Those are his words. You can find it in system,etc,init.d
Click to expand...
Click to collapse
By his rom do you mean cleannote v4 as it is the current rom im running. Also i checked for that folder but it is already not present there. Also now i have noticed that on his v8.1ex version i get screen freezes while running quadrant which only way to get rid off is restart the phone. Im loving his kernel guys its extremely smooth but just help me out with this problem as i wanna flaunt its performance through technical data. Lol
Thanks for your support guys.
Husson_Ally said:
Yes i already checked for that folder in system/etc but i cant locate one.
By his rom do you mean cleannote v4 as it is the current rom im running. Also i checked for that folder but it is already not present there. Also now i have noticed that on his v8.1ex version i get screen freezes while running quadrant which only way to get rid off is restart the phone. Im loving his kernel guys its extremely smooth but just help me out with this problem as i wanna flaunt its performance through technical data. Lol
Thanks for your support guys.
Click to expand...
Click to collapse
Well some phones do not like oc and uv. You should do a clean install and do not restore apps and system with tittanium backup.
First test your cleanote without your apps. i use nofrills for to set my cpu. Do not use set cpu because many users experiance problems with that.
Good luck
no results.
androiadicted said:
Well some phones do not like oc and uv. You should do a clean install and do not restore apps and system with tittanium backup.
First test your cleanote without your apps. i use nofrills for to set my cpu. Do not use set cpu because many users experiance problems with that.
Good luck
Click to expand...
Click to collapse
Hey mate i have already done as you said. I have not restored any app through titanium back up. Infact i do not have titanium even installed on my note on cleannote v4. There is no set cpu installed too. Btw i tried with no frill but still no luck.
One tiny little request if you can will you post the link of this thread on galvin's kernel thread so that might be able to help me as of right now im veey junior member so according to xda rules i cant.
Thanks for your time buddy.
Hi, as you requested, he did post your thread link over at the NOTECORE kernel thread. However, as I mentioned above, I m facing the same issue and have read the kernel developers answer on this as well. Acc to him, not every phone can support the EX version. Its due to the difference in voltages. My phone cannot handle the EX version as well. However, I m happy to stick with the Standard version. If you're looking for great Quadrant and Antutu scores, just change the governer to pegasusq using SetCPU or any similar app, uncheck Power saving option and then run the test couple of times. I always get around 4400 Quadrant and 7100 Antutu scores.
thanks guys
lifehijack said:
Hi, as you requested, he did post your thread link over at
the NOTECORE kernel thread. However, as I mentioned above, I m facing the same issue and have read the kernel developers answer on this as well. Acc to him, not every phone can support the EX version. Its due to the difference in voltages. My phone cannot handle the EX version as well. However, I m happy to stick with the Standard version. If you're looking for great Quadrant and Antutu scores, just change the governer to pegasusq using SetCPU or any similar app, uncheck Power saving option and then run the test couple of times. I always get around 4400 Quadrant and 7100 Antutu scores.
Click to expand...
Click to collapse
Thanks to all of you guys for your wonderful support and help throughout. oh so atleast now i know whats the reason for that thanks anyways lifehijack and yeah i hit the thanks button for all of you.
Also many thanks for posting this link on gl notecore kernel thread
So is there anyways we could play around with these voltages and make it work. May be some technical experts here might have the answer to that i hope.
Im using notecore 8.1 ex with classic rom v3 and they both run fine have got pretty good scores too.
Sent from my GT-N7000 using xda premium
All you need is the setCPU app (search in xda forums,you'll find it) and change the governer from ONDEMAND to pegasusq, that's it.
lifehijack said:
All you need is the setCPU app (search in xda forums,you'll find it) and change the governer from ONDEMAND to pegasusq, that's it.
Click to expand...
Click to collapse
Yes bro i have done just the same as an alternative to ex version and it gives onsiderable performance and scores but will always have a craving for extreme version. Hope to get some technical help from xda experts to make ex version run on my note just fine.
As has already been mentioned not all phones are equal. your needs more core voltage than what my extreme kernel is configured for. if i increased it you would then complain about heat and battery life getting worse.
Stick with my standard version as that uses stock cpu voltages and frequencies. If you took the time to read the OP and even the last few pages of the thread you would have seen this mentioned.
You can use tegrak to adapt the frequency and the voltage. This way you can set the frequencies that suit best for your phone.
Sent from my Galaxy Note running ICS
g.lewarne said:
As has already been mentioned not all phones are equal. your needs more core voltage than what my extreme kernel is configured for. if i increased it you would then complain about heat and battery life getting worse.
Stick with my standard version as that uses stock cpu voltages and frequencies. If you took the time to read the OP and even the last few pages of the thread you would have seen this mentioned.
Click to expand...
Click to collapse
No bro im not like that complainbox guy. Anyways i dunno why and how or may be you read this post and improved it in your version 9 ex but now your ex v9 works perfectly fine on my note and yes buddy i have read your op around 4 to 5 times and everytime i install your newer version of kernel. And i wanna give you a big thank you for making us soo many wondeful kernels. Your are awesome mate.
I actually cant believe that such a wonderful and big developer came to my thread to help. Once again thanks alot and also a big thanks to androiadicted for posting this link on galvin's thread.
altae said:
You can use tegrak to adapt the frequency and the voltage. This way you can set the frequencies that suit best for your phone.
Sent from my Galaxy Note running ICS
Click to expand...
Click to collapse
Thanks for you advice mate ill check it out. Any recommended voltages and frequencies?
Hello.
First, thanks @Quarx realy thanks, amazing job!!:victory::angel:
so, now the thing....
I'm using cm-10.2-20131030-NIGHTLY-mb526 :laugh: whit the update kernel, but i want a kernel more recently...
i was looking everywhere and i didn't find anything. So when i read this post:
http://forum.xda-developers.com/showpost.php?p=47827999&postcount=1654 form @okij, !!!he extract the kernel from cm 11!!! omg
so i'll try, i took this file: cm-11-20140120-NIGHTLY-mb526 and extract the kernel... make a flashable.zip and Bingo.. new kernel.. more recent..
Now i have cm10.2 with 2.6.32.9 Mon.Jan 20....2014
so if you are intrerested.. you only have to do the same..
My device is Motorola Defy + MB526
Edit: now i put the included on cm-11-20140131-NIGHTLY-mb526.zip
That's all..
Have fun
Sorry for my english... not the best.
iopser said:
Hello.
First, thanks @Quarx realy thanks, amazing job!!:victory::angel:
so, now the thing....
I'm using cm-10.2-20131030-NIGHTLY-mb526 :laugh: whit the update kernel, but i want a kernel more recently...
i was looking everywhere and i didn't find anything. So when i read this post:
http://forum.xda-developers.com/showpost.php?p=47827999&postcount=1654 form @okij, !!!he extract the kernel from cm 11!!! omg
so i'll try, i took this file: cm-11-20140120-NIGHTLY-mb526 and extract the kernel... make a flashable.zip and Bingo.. new kernel.. more recent..
Now i have cm10.2 with 2.6.32.9 Mon.Jan 20....2014
My device is Motorola Defy + MB526
That's all..
Have fun
Sorry for my english... not the best.
Click to expand...
Click to collapse
So, what's the gain? the latest CM11 kernels is more unstable than CM10.2 and the latest 10.2 have no camera for green lens. So what's the point?
so if you are intrerested.. you only have to do the same..
pgreed said:
So, what's the gain? the latest CM11 kernels is more unstable than CM10.2 and the latest 10.2 have no camera for green lens. So what's the point?
so if you are intrerested.. you only have to do the same..
Click to expand...
Click to collapse
as far i can tell, the phone is more smoth... i don't see unstability..
for now. no problems....
if I see problems, I comment
iopser said:
as far i can tell, the phone is more smoth... i don't see unstability..
for now. no problems....
if I see problems, I comment
Click to expand...
Click to collapse
I see but I prefer the latest version of CM 10.2 but with camera bug solved (that is a hope).
Hi
well, now i can tell this, the governors cpu go erratic/crazy with the kernel cm-11-20140131-NIGHTLY-mb526.zip
i look into the dmesg.. and i don't see anything wierd thing... in fact.. i compared 20140131 with the update http://forum.xda-developers.com/showpost.php?p=47827999&postcount=1654 and look similar.. even the same error :silly:
i don't konw what to do..
cpu erratic: i try to change the governor, the most stable one, is boosted. Interactive, smartass and indemand, when i try this, it just jump 300 to 1200 (overclock ), almost don't pass to 600 and 800.
Any ideas how to fix the governors cpu going crazy??
Pd: both dmesg included.
Pd2: new info, i flashed the last one kernel 6-02-2014, and is more stable, the cpu erratic/crazy things... doesn't appaers :fingers-crossed: governor cpu interactive
Thank's
Have fun
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Sorry for my english... not the best.
MB526