How to put .NET in ROM for CHT & Cht Editor ?
The latest builds have Net Framework 3.5 already inside,21916 is just an example or give a search here in XDA , it is easy to find the ready package.
TIR2 said:
How to put .NET in ROM for CHT & Cht Editor ?
Click to expand...
Click to collapse
Related
3.0 is out. All configurations and tweaks needed
http://forum.xda-developers.com/showthread.php?t=418151
sergiopi said:
3.0 is out. All configurations and tweaks needed
http://forum.xda-developers.com/showthread.php?t=418151
Click to expand...
Click to collapse
I've already installed sogarth's ROM 6.1, but the internal .net application was to old for schabs-advanced-config-tool.
It needs version 3.5. I have to upgrade the .net compact framework version. you too ?
Palmchen said:
I've already installed sogarth's ROM 6.1, but the internal .net application was to old for schabs-advanced-config-tool.
It needs version 3.5. I have to upgrade the .net compact framework version. you too ?
Click to expand...
Click to collapse
I used the modaco tool, here http://www.modaco.com/content/windo...act-framework-3-5-without-upgrading-your-rom/
Sorry for the simple and stupid question, but out of these .net 3.5
NETCFv35.ppc.armv4.cab
NETCFv35.wce.armv4.cab
NETCFv35.wm.armv4i.cab
which one do I install for my leo? I would guess it's the ppc version, but then what are wce and wm for?
Thanks
ulukai3 said:
Sorry for the simple and stupid question, but out of these .net 3.5
NETCFv35.ppc.armv4.cab
NETCFv35.wce.armv4.cab
NETCFv35.wm.armv4i.cab
which one do I install for my leo? I would guess it's the ppc version, but then what are wce and wm for?
Thanks
Click to expand...
Click to collapse
I have NETCFv35.wm.armv4i installed on my HD2.
I always install through windows mobile device center or activesync, through add remove programs. It didn't give me any sort of problems till now.
Thanks for the help.
what offers this version from the rom version?
ulukai3 said:
Sorry for the simple and stupid question, but out of these .net 3.5
NETCFv35.ppc.armv4.cab
NETCFv35.wce.armv4.cab
NETCFv35.wm.armv4i.cab
which one do I install for my leo? I would guess it's the ppc version, but then what are wce and wm for?
Thanks
Click to expand...
Click to collapse
Links please?
Hi all,
Firstly I come here to look for help because I spent many time reading many posts in here and over the net about my problem, but I was unable to find a definitive solution.
Here is what it deals with (sorry for my English writing, I'm a native French writer).
I own a Leo w/ WM [NO]6.0[/NO] 6.5 (T8585) and Manila 2.5.
I installed the mod Cookie HomeTab, firstly 1.6.1 then 1.7.
I found that if 1.6.1 was nice, 1.7 was much better but... it also drains my battery very quick.
I wrote again the whole post about the newest version and found a small advice to install .Net F. 3.5. I followed the link and downloaded the CAB.
When I tried to install it, I got an error : "A newer version is already installed".
In fact, it seems that the 2.0 is already installed in ROM.
I tried to tune the registry, putting a "1" dword on 3.x entry, and a "0" dword on "2.x" entry, but it did not work.
Nevermind, 3.5 is not installed, I still have 2.x and Cookie HomeTad and CHT Editor already working nice with it.
But now, CHT Editor won't launch, making a .Net error: "a newer version of NF is required"...
The little system utility cgacutil in Windows mobile directory tells me I still have the 2.x version of .net installed. As it was when everything worked nice.
But the reality is that it does not :-/
Microsoft did not answered to my mail and I'm very sad to be unable to use CHT Editor to tune Cookie HomeTab. And overall, I would want to definitively repair my .Net installation even if I'm stucked w/ 2.0.
What do you think of it and do you have some advices for me, please ?
Thanks
Helloser
Here is some additionnal information, maybe you need it to understand my problem better ?
- System version: 5.2.21864 (21864.5.0.81)
- Manila version: 2.5.19202525.0
- ROM version: 1.43.406.2 (70124) FRE
- ROM date: 10/28/09
- Radio version: 2.04.50.22_2
- Protocole version: 15.26.50.07U
- OS version: Windows Mobile 6.5 Professionnal (hu ? I thought I had 6.0 !)
Regards, Helloser
Hmmm, I noticed that I did not upgrade my ROM to 1.66 as I thought I did...
I will do this firstly and return to you to see if my problem was maybe solved by this way.
Hope, hope, hope
Well let's hope that your ROM flash will solve your problem, first of all. But, if it doesn't then this may help...
A user was complaining that the editor would not run for him, using .Net 3.7. This had been built in to the ROM that he flashed, and it would not let him install .Net 3.5. So, he installed 3.5 to his storage card and then manually copied the files to his device memory. Then, using the .Net Configuration tool he set CHTEditor (and CHTRestart) to use .Net 3.5 and it now works.
Now whilst this is a different issue, the resolution may help you, so give it a try...
http://forum.xda-developers.com/showpost.php?p=6413191&postcount=1063
Yoohoo ! The ROM upgrade did it nicely: 3.5 compact .Net framework got installed like a charm, directly into main ROM, overwriting 2.x already default installed version w/o any error.
I got plain usage of Co0kie HomeTab and CHTEditor, w/o it is too hard to tune up every registry entry for CHT...
helloser said:
Yoohoo ! The ROM upgrade did it nicely: 3.5 compact .Net framework got installed like a charm, directly into main ROM, overwriting 2.x already default installed version w/o any error.
I got plain usage of Co0kie HomeTab and CHTEditor, w/o it is too hard to tune up every registry entry for CHT...
Click to expand...
Click to collapse
Make sure you enable 3.5.9 rather than version 2.x.xxx in the regitry by doing the below...
HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.x.xxx from 1 to 0. Next Change the DWORD data of entry 3.5.xxx from 0 to 1 and then reset. This disables 2.0 and enables 3.5.
(Courtesy of Tboy2000)
Oh my G..., even w/ a successful installation of NCF 3.5, the registry kept on using 2.x !
I could invert both values. I'm not sure it is really less greedy on battery usage though...
Hi all, I stumbled across this after updating to Vodafone's new ROM (can't say I really enjoy their new splash though) :-(
I did the registry tweak to ensure .net 3.5 is used, but how do I check ? How will I know? Is there something that specifically needs 3.5 to work?
@ Armes
I did the registry tweak to ensure .net 3.5 is used, but how do I check ? How will I know?
Click to expand...
Click to collapse
Hi, very simple: find the "cgacutil.exe" Windows utility in %Win% directory tree on your device, and run it: it will popup a small dialog noticing what is the version of .Net that is currently handled.
Experimenting Co0kie HomeTab v1.37 after Compact .Net upgrade to v3.5:
Finally, I can say that the battery drained much slower than previously. Nicely done !
Armes said:
I did the registry tweak to ensure .net 3.5 is used, but how do I check ? How will I know? Is there something that specifically needs 3.5 to work?
Click to expand...
Click to collapse
Basically, that registry tweak is how the device determines what version of .Net to use. Running \windows\cgacutil.exe will only tell you what version(s) you have installed, so the registry key is the best way to know for sure.
It may be overkill, but the CHTEditor for Co0kie's Home Tab will only run under .Net 3.5, so you could install that, but you need Co0kie's Home Tab installed for it to work anyway. I'm obviously gonna recommend installing it to check though, aren't I
I am currently building a new set of roms. I have been having an issue cooking microsoft .net 3.5 into the roms.
I have created a rom using HTC HD2 leo base rom 1.66. I am using OS 21869 Upped sense to version 2016.
I put in cookies home tab and cht editor and .net 3.5. When I try to run cht editor from the menu on the home screen I get the dependency error. When I then install .net 3.5 manually and reboot the phone cht editor then works.
What is interesting is if I use the exact same setup but change the OS to version 23569 it works perfectly.
Does any body have any ideas?
Net Cf use to be in \SYS\Common packs by default, check if it's there
Pisca said:
Net Cf use to be in \SYS\Common packs by default, check if it's there
Click to expand...
Click to collapse
Yes I disabled the .net that was in the sys packages section on oskitchen but it hasn't made a difference. I even put in as the last application but also didn't make a difference.
Use the Net in Common SYS and Net 3.5 imported togheter.
I have tried that but no luck. Programs that need .net doesn't detect it but when you install it manually afterwards it works fine. Also tried it on a 6.5.5 build using the exact kitchen build i was using and worked perfectly
Are you sure it's being included in the rom? Check the dump folder; I say this because once I decided to just stick the NET 3.5 package into my EXT directory, and when I cooked the rom none of the files were included because the package structure was all wrong (it had to be in EXT form, not the sys form). Let's just say that that rom really sucked, lol.
Try with another Com 2 build ( i use 21915 ) ,from 21888 Net3.5 its already included, i use that without any EXT net 3.5 package.
af974 said:
Try with another Com 2 build ( i use 21915 ) ,from 21888 Net3.5 its already included, i use that without any EXT net 3.5 package.
Click to expand...
Click to collapse
I am downloading 21915 now from the os builds section, lets hope it works this has been driving me maaaaaaaaaaaaaaad!!!!!
I think I have it sorted I am doing a test build now. I looked at the netcf folder in 21869 and it was referencing 2_0 in the file names. I then looked at netcf in the 21915 build and it was referencing 3_5 file names.
I simply deleted the netcf out of 21869 and replaced it with 21915. Running build now and hope it sortes the issue!
Thank you all for your help. The copy of the netcf folder did the trick. It is not registering the new .net 3.5!!!!!
Hello,
I test to cook CHT v2 in my rom,
I see post in thread cht 2, but after flashing the home tab is blank
Someone can tell me the instruction for cooking cht in my rom (hd mini photon)
I made a cab whit the language pack and hvga port.
Bye
The package of Cookie's Home Tab in attachement....
m!k3 said:
Hello,
I test to cook CHT v2 in my rom,
I see post in thread cht 2, but after flashing the home tab is blank
Someone can tell me the instruction for cooking cht in my rom (hd mini photon)
I made a cab whit the language pack and hvga port.
Bye
Click to expand...
Click to collapse
That is fine - Edit your Home Layout and add widgets.
When I first installed CHT 2.0 my HomeTab was also blank until I figure it out that I need to edit the Home Layout.
Remember to cook CHT 2.0 after your default Manila EXT packages.
cookes home tab chteditor 2.0
can you try to cook with this i upload for you
fatihozoglu said:
can you try to cook with this i upload for you
Click to expand...
Click to collapse
I create the same package whit ver.2 final,
I copy the 2 folders in the ext package, but after the flashing the home is the original sense...
af974 said:
Remember to cook CHT 2.0 after your default Manila EXT packages.
Click to expand...
Click to collapse
How to cook after the manila file?
m!k3 said:
How to cook after the manila file?
Click to expand...
Click to collapse
+ 1
How do you control order in which packages are cooked?? And if that's not what you mean, could you clarify?
Regards
Smith
Solved... if you want cookie's home tab pakage whit lanuage pack and HVGA port, pm me
smithisize said:
+ 1
How do you control order in which packages are cooked?? And if that's not what you mean, could you clarify?
Regards
Smith
Click to expand...
Click to collapse
In osKitchen you can set "Install this package prior to the packages in the list below" property. So if you add CHT to this list for every Manila package, you're done!