Database Users

Noob trying to flash to 2.1d

I have successfully flashed my Sprint THC hero with no problems.
My issue though is flashing the phone to 2.1d. i can't for the life of me follow these directions and I am really stumped on the process of doing a nandroid and flashing the ROM.
I downloaded the nandroid from this site but not sure where I put the directory with the files at. Can anyone break this process down into "ejpyle terminology"?
My problems are:
- where to copy the nandroid directory
- where to put the 2.1d ROM
- do i need this busybox that everyone is talking about?

Successfully flashed what? And what method.
If you mean you successfully ROOTED your Phone then huzzah, that's step one complete.
Part of the rooting process should include putting a recovery image on the phone. If you did that correctly then do this, power off the phone.hold down the home button and power it back up. In a few seconds you should boot into a recovery menu with options to do a nandroid backup/restore turn on the usb connection to move files to the phone from your pc, and flashing a zip. If you don't have this recovery menu then you need to install it.

I don't think you have downloaded a Nandroid, I think you have downloaded an "update.zip" as we so affectionitly call them around here. This is a term used from the first set of recovery tools we had, where we had to rename update files update.zip to be loaded. Thankfully the recovery software has been updated to let us store and use multiple files.
So you probable have fresh-cdma-hero-2.0d.zip downloaded.
Plug your phone into USB and set it to Mount SD Card or what ever it says in 1.5
Copy this file to the root of the sdcard. don't put it in to any folders just F:\ or whatever the drive letter is.
THEN
Unmount the sdcard or turn off the disk drive mode (Cant remember what 1.5 calls it)
THEN
Power off the phone.
Power the phone back on whilst holding the home key. When you feel the vibration (let your girl hold it if she wants ROFL) let go and it will boot into recovery.
THEN
Go to Wipe...do Factory Reset
THEN
Wipe dalvik
THEN
Go back to Flash Update from SDcard
Select the update file above and hit the home key to flash it.
The phone SHOULD install and go back to the main screen of recovery.
THEN select
Reboot
THEN
Wait a hell of a long time 10+ minutes is NOT uncommon (it has to rebuild dalvik and other stuff)
THEN
When the phone boots hit Always Allow for the memory settings app.
THEN
Setup all your google info again.....
THEN
You should be good to go
AND DEN????????
HAHAHAHAHAHAHA
EDIT:
I am SURE that I left a step out above, just go with the flow and wipe everything under the wipe menu. It's laid out so a monkey can do this stuff...hence the reason I am able to.

gunnyman said:
Successfully flashed what? And what method.
If you mean you successfully ROOTED your Phone then huzzah, that's step one complete.
Part of the rooting process should include putting a recovery image on the phone. If you did that correctly then do this, power off the phone.hold down the home button and power it back up. In a few seconds you should boot into a recovery menu with options to do a nandroid backup/restore turn on the usb connection to move files to the phone from your pc, and flashing a zip. If you don't have this recovery menu then you need to install it.
Click to expand...
Click to collapse
thank you thank thank you... you have me going in the right directions.
Quesion..what is the best (most reliable without as many bugs) ROM to load that is 2.0-1?

ejpyle said:
thank you thank thank you... you have me going in the right directions.
Quesion..what is the best (most reliable without as many bugs) ROM to load that is 2.0-1?
Click to expand...
Click to collapse
Not to be rude, because you seem like a decent enough person, but please read http://forum.xda-developers.com/showthread.php?t=668905 before asking anything else. Most of your answers are there, and 'search' will find the rest.

Kcarpenter said:
I don't think you have downloaded a Nandroid, I think you have downloaded an "update.zip" as we so affectionitly call them around here. This is a term used from the first set of recovery tools we had, where we had to rename update files update.zip to be loaded. Thankfully the recovery software has been updated to let us store and use multiple files.
So you probable have fresh-cdma-hero-2.0d.zip downloaded.
Plug your phone into USB and set it to Mount SD Card or what ever it says in 1.5
Copy this file to the root of the sdcard. don't put it in to any folders just F:\ or whatever the drive letter is.
THEN
Unmount the sdcard or turn off the disk drive mode (Cant remember what 1.5 calls it)
THEN
Power off the phone.
Power the phone back on whilst holding the home key. When you feel the vibration (let your girl hold it if she wants ROFL) let go and it will boot into recovery.
THEN
Go to Wipe...do Factory Reset
THEN
Wipe dalvik
THEN
Go back to Flash Update from SDcard
Select the update file above and hit the home key to flash it.
The phone SHOULD install and go back to the main screen of recovery.
THEN select
Reboot
THEN
Wait a hell of a long time 10+ minutes is NOT uncommon (it has to rebuild dalvik and other stuff)
THEN
When the phone boots hit Always Allow for the memory settings app.
THEN
Setup all your google info again.....
THEN
You should be good to go
AND DEN????????
HAHAHAHAHAHAHA
EDIT:
I am SURE that I left a step out above, just go with the flow and wipe everything under the wipe menu. It's laid out so a monkey can do this stuff...hence the reason I am able to.
Click to expand...
Click to collapse
You rock....You just taught a death and blind monkey how to do it. Thanks man!!!!! I will be sure to have my wife hold the phone for the vibrate thing. LMFAO

ejpyle said:
thank you thank thank you... you have me going in the right directions.
Quesion..what is the best (most reliable without as many bugs) ROM to load that is 2.0-1?
Click to expand...
Click to collapse
There is no best one. The 2.1 ROMS are all very stable. Just avoid the ones that say {DEV} in the thread title because they are under development and likely have lots of stuff broken in them.
Decide what you want for yourself, beauty, speed, both? A good hint is to look for the ROM threads that have the most pages attached to them these are the ROMS that have the most discussion and help within them.

ejpyle said:
You rock....You just taught a death and blind monkey how to do it. Thanks man!!!!! I will be sure to have my wife hold the phone for the vibrate thing. LMFAO
Click to expand...
Click to collapse
DO NOT FLASH THE 2.1 Signed RUU Test ROM
OR I WILL FIND AND KILL YOU!

gunnyman said:
There is no best one. The 2.1 ROMS are all very stable. Just avoid the ones that say {DEV} in the thread title because they are under development and likely have lots of stuff broken in them.
Decide what you want for yourself, beauty, speed, both? A good hint is to look for the ROM threads that have the most pages attached to them these are the ROMS that have the most discussion and help within them.
Click to expand...
Click to collapse
thanks man, if I win the power ball lottery I will be sending you all a private message.
one more quickie though, If Sprint releases the 2.1 before I become eligible for AARP will I have to flash back to the 1.5 version before updating my device with it?

Kcarpenter said:
I don't think you have downloaded a Nandroid, I think you have downloaded an "update.zip" as we so affectionitly call them around here. This is a term used from the first set of recovery tools we had, where we had to rename update files update.zip to be loaded. Thankfully the recovery software has been updated to let us store and use multiple files.
So you probable have fresh-cdma-hero-2.0d.zip downloaded.
Plug your phone into USB and set it to Mount SD Card or what ever it says in 1.5
Copy this file to the root of the sdcard. don't put it in to any folders just F:\ or whatever the drive letter is.
THEN
Unmount the sdcard or turn off the disk drive mode (Cant remember what 1.5 calls it)
THEN
Power off the phone.
Power the phone back on whilst holding the home key. When you feel the vibration (let your girl hold it if she wants ROFL) let go and it will boot into recovery.
THEN
Go to Wipe...do Factory Reset
THEN
Wipe dalvik
THEN
Go back to Flash Update from SDcard
Select the update file above and hit the home key to flash it.
The phone SHOULD install and go back to the main screen of recovery.
THEN select
Reboot
THEN
Wait a hell of a long time 10+ minutes is NOT uncommon (it has to rebuild dalvik and other stuff)
THEN
When the phone boots hit Always Allow for the memory settings app.
THEN
Setup all your google info again.....
THEN
You should be good to go
AND DEN????????
HAHAHAHAHAHAHA
EDIT:
I am SURE that I left a step out above, just go with the flow and wipe everything under the wipe menu. It's laid out so a monkey can do this stuff...hence the reason I am able to.
Click to expand...
Click to collapse
I hope the possible step left out above does not give me "another" bricked phone.

ejpyle said:
I hope the possible step left out above does not give me "another" bricked phone.
Click to expand...
Click to collapse
I think I may have left out a step if you have apps on your sd card...
NOT WAIT I LEFT OUT THE DO A NANDROID BACK UP FIRST!!!!!!!!!!! DO THAT FIRST!!!! HOLY CRAP I HOPE YOU HAVEN'T DONE ANYTHING YET!!! DO A NANDROID!!!!!!!
Nope no chance at all of that as far as I can tell.
The only bricks we have seen are from people downloading GSM software or dropping a brick on their phone...that sounded funnier in my head.

smw6180 said:
Not to be rude, because you seem like a decent enough person, but please read http://forum.xda-developers.com/showthread.php?t=668905 before asking anything else. Most of your answers are there, and 'search' will find the rest.
Click to expand...
Click to collapse
Because you too seem like a decent person I will share this with you....
I followed a thread on here at the beginning of march to install a ROM and the directions (which I followed exact) bricked my phone. I spent hours reading up on this website to find out after the fact that the RUU might have a bug and some users will have issues. With that said, I decided to ask questions. This site has a lot of cleanup going on (no disrespect to anyone here as you are all VERY intelligent) and I do not think that someone as myself would be comfortable just "searching" for the answer without asking questions first with respect to the experience we have had in the past.

Kcarpenter said:
I think I may have left out a step if you have apps on your sd card...
NOT WAIT I LEFT OUT THE DO A NANDROID BACK UP FIRST!!!!!!!!!!! DO THAT FIRST!!!! HOLY CRAP I HOPE YOU HAVEN'T DONE ANYTHING YET!!! DO A NANDROID!!!!!!!
Nope no chance at all of that as far as I can tell.
The only bricks we have seen are from people downloading GSM software or dropping a brick on their phone...that sounded funnier in my head.
Click to expand...
Click to collapse
LOL I have not done it yet. I am about to copy this nandroid - file name "nandroid-2.0.zip" to my SDCARD. then i will do it.

ejpyle said:
LOL I have not done it yet. I am about to copy this nandroid - file name "nandroid-2.0.zip" to my SDCARD. then i will do it.
Click to expand...
Click to collapse
So you have gotten me curious now, where did you pick up that file at?
My only guess is that someone has posted a nandroid of their device and zipped it. Most of the Rom downloads are ROMNAME.zip....
You can always try to load it, it won't load if its not setup properly inside for a rom.
And about your going back to 1.5 to update to sprints 2.1:
IF YOU UPDATE TO SPRINTS OTA 2.1 UPDATE YOU WILL NOT BE ABLE TO ROOT AGAIN UNTIL SOMEONE FINDS ANOTHER EXPLOIT!!! WHICH COULD BE NEVER!!

Kcarpenter said:
So you have gotten me curious now, where did you pick up that file at?
My only guess is that someone has posted a nandroid of their device and zipped it. Most of the Rom downloads are ROMNAME.zip....
You can always try to load it, it won't load if its not setup properly inside for a rom.
And about your going back to 1.5 to update to sprints 2.1:
IF YOU UPDATE TO SPRINTS OTA 2.1 UPDATE YOU WILL NOT BE ABLE TO ROOT AGAIN UNTIL SOMEONE FINDS ANOTHER EXPLOIT!!! WHICH COULD BE NEVER!!
Click to expand...
Click to collapse
I got it from here....
http://dx.infernix.net/nandroid-2.0.zip

when you boot into recovery, what do you see?
If you rooted correctly and put a recovery image on there there isn't anything else you have to do to enable Nandroid.

ejpyle said:
I got it from here....
http://dx.infernix.net/nandroid-2.0.zip
Click to expand...
Click to collapse
Ok, so this leads me to another question. Where is the thread that links to this download?
The reason I am worried about this file now that I see it:
It's only 942kb - WAY to small for a rom or nandroid.

gunnyman said:
when you boot into recovery, what do you see?
If you rooted correctly and put a recovery image on there there isn't anything else you have to do to enable Nandroid.
Click to expand...
Click to collapse
I had a triangle with an exclamation point.
I am copying the recovery to my SDCARD now... recovery-RA-heroc-v1.5.2

ejpyle said:
I had a triangle with an exclamation point.
I am copying the recovery to my SDCARD now... recovery-RA-heroc-v1.5.2
Click to expand...
Click to collapse
1.6.2 is the latest. Not a whole lot different from 1.5.2 but some bugs where fixed and you can get the nifty Green Nexus Carebear back ground.

Kcarpenter said:
1.6.2 is the latest. Not a whole lot different from 1.5.2 but some bugs where fixed and you can get the nifty Green Nexus Carebear back ground.
Click to expand...
Click to collapse
I copied everything you indicated to my card. When I press HOME and PWR together I get a triangle with an exclamation point. Did this monkey not do something right?

New to rooting and upgrading ROMs

Hello, xda!
I've been around on the forums for some time, flashing and messing with ROMs before, but with an old HTC Touch Pro. So forgive me for seeming like a leecher.
I've come here to ask a few questions reguarding Andriod roms and flashing/upgrading procedures. I'm comfortable with using RUUs to upgrade, but who isnt...
I've had my HTC Hero for about 2 weeks now and I accidently bricked one already. I've rooted manually once, and got no signal on the stock Sprint ROM so I tried to go back to the original flash recovery but killed my phone instead.
Could someone help me out. I've read guides and been very, very anxious to upgrade and root but as you've read, I've already bricked my phone once so I'm pretty cautious now.
From what I understand, I need to root to 1.2.3, NAND backup, WIPE sd card & phone, then flash damage control's rom.....
So do I have it right or should I read a bit more?
Any help and tips from some experienced flashers would be much appreciated. Thanks!

mjones832 said:
From what I understand, I need to root to 1.2.3, NAND backup, WIPE sd card & phone, then flash damage control's rom.....
So do I have it right or should I read a bit more?
Any help and tips from some experienced flashers would be much appreciated. Thanks!
Click to expand...
Click to collapse
First off; we're happy you chose not to give up and came back a second time.
What you do need to do is; 1) Root and flash a Recovery image 2) Make a Nandroid back up, 3) Wipe ONLY your phone (not your SD Card, unless you want to do Apps2SD) and 4) Flash the ROM of your choice.
**The rooting guide I linked above is the way I prefer to do it; via adb commands. However, you could also you use Flipz's kitchen to do all of this for you.
.
For more information about Flipz's kitchen, please go here: Flipz's Kitchen
Also, do note -- for other tutorials/guides/references; go HERE

I was seriously nervous to start the process as well. As I told someone else, being nervous is a good thing. That just means you'll be careful.
I seriously recommend reading this thread and following instructions. Do not skip steps, do not pass go, do not collect $200. I've personally used the Windows guide and the Linux guide. Both are very well done and I can verify that they work.
Beyond that, the Search function is fantastic and provides lots of information. Don't be afraid to ask questions, either. Most of us are nice and like to help, even if we do call people n00bs.

WOW! Insanely quick replies. Thanks for that guys. This is what I wanna hear so I'll be doing the flash when I get home.
I'm using the 2.1update1 sprint beta ROM right now so should I revert back to the 1.56 and THEN do all this or can I just jump right in. I've always been confused as to which rom needs what flash rec root file or w/e.
And yes, I do want the A2SD thing as thats one problem I'm having right now. I've only got 16MB of storage left of my current storage area but my 8GB sd card is almost empty except for a few songs and pictures. Also, should I upgrade my sd card to a higher class if my 8GB is a class 2?
Thanks again guys!

Also, I mentioned that the last time I tried to root, I had no service after I did so. Why is that and what do I do to fix this? I couldn't find anything on this in google searches.

mjones832 said:
Also, I mentioned that the last time I tried to root, I had no service after I did so. Why is that and what do I do to fix this? I couldn't find anything on this in google searches.
Click to expand...
Click to collapse
Some people say to toggle airplane mode on and off. Some people say reboot. The last time this happened to me I just played a video game for ten or fifteen minutes and it fired up.

mjones832 said:
And yes, I do want the A2SD thing as thats one problem I'm having right now. I've only got 16MB of storage left of my current storage area but my 8GB sd card is almost empty except for a few songs and pictures. Also, should I upgrade my sd card to a higher class if my 8GB is a class 2?
Click to expand...
Click to collapse
I've not used apps2sd myself, but I'm told the higher class card the better, for obvious reasons.

Thanks, subcypher! I've got absolutely no reason to not do this. I'll be doing it as soon as I get home.

mjones832 said:
Thanks, subcypher! I've got absolutely no reason to not do this. I'll be doing it as soon as I get home.
Click to expand...
Click to collapse
Have fun! We'll be here when you get back.

yes.. a faster class sd card is highly recommended!!! other wise with a2sd, you might see more lag... and issues.
I personally, would not do a2sd at the same time as you upgrade. finish the upgrade first. make sure all is good...
then do the a2sd. and do a nandroid backup again before.

So I just tried to go back to 1.56 with the signed RUU that sprint gives out and it gave me an error. Failed to load bootloaded or something similar to that.
Remember, I'm on the 2.1update1 beta release of sprint's rom but I wanna root and flash to DamageControl's 2.1.
I've tried looking into how to root my current 2.1update1 beta ROM but I didn't come across anything worthwhile.
Anyone know whats going on???

mjones832 said:
So I just tried to go back to 1.56 with the signed RUU that sprint gives out and it gave me an error. Failed to load bootloaded or something similar to that.
Remember, I'm on the 2.1update1 beta release of sprint's rom but I wanna root and flash to DamageControl's 2.1.
I've tried looking into how to root my current 2.1update1 beta ROM but I didn't come across anything worthwhile.
Anyone know whats going on???
Click to expand...
Click to collapse
What steps did you take to use the Sprint RUU?
In order to run the Sprint RUU, you need to do:
**Make sure you have the appropriate drivers to detect HTC Sync**
1. Install HTC Sync on your computer
2. After install, open and leave the HTC Sync Window open
3. Connect your phone; and click on the sync option. You should be able to sync, if not - then you're having driver issues.
4. After you've successfully synced, NOW run the Sprint 1.5 RUU.
5. Upon a successful RUU, you'll have your phone back to its factory settings.
Now you can reroot, flash whatever ROM you like, and flash any/all add-ons.

As far as the signal goes, the following are from the Fresh 2.0d install page.
A reboot after the first bootup finishes is recommended, especially if you were previously having PRI/PRL problems.
Click to expand...
Click to collapse
If after flashing you end up with any data issues then first try rebooting. If that doesn’t resolve it for you then try updating your profile and PRL. This is a side effect of the different PRI’s and PRL’s that people have ended up on. You may actually need to update your profile and PRL a couple times to get everything going but I promise it will. You should end up on PRL 60663.
Click to expand...
Click to collapse
I personally had no problems, but I was flashing Fresh, not Damage.

Ok, I've got it rooted, and nand-backup stored on my PC.
DamageControl says to wipe before his install. Do I "wipe data/factory reset" or "wipe Dalvik-cache" or any other options?

If its the same as Fresh, they want you to do a Wipe data/factory reset

Thanks everyone! I'm installing DamageControl right now! I'll let you know how it goes.

Success! I've got the phone rooted, at least I think I do, and flashed to DamageControl v2.08.
My next task is I really want to get my apps to install to my sdcard. I've got a 8GB class 4 sdcard. Should and can I put my apps onto this? I've heard that the hero doesnt even read and write faster then 2Mbps so I'm good, right?

Not sure if I'm rooted. I've installed a few apps that require SU and when they try to do a "SU Request" the screen sits at a black screen with that title at the top.
Any idea on whats going on?

If you were able to flash a damage less rom you're rooted.
On the black window there should be am option on the bottom to allow, select it.
-------------------------------------
Sent via the XDA Tapatalk App

The black screen for SU is caused by not having USB Debugging turned on as it is required for superuser permissions. I have not tried A2SD because I only have a class 2, but have read that unless you have a class 6 it can be slow.

Trying to root - problems [SOLVED]

Hey guys.
I've been attempting this all morning and so far I've had no luck. I have a VodafoneAU Legend which I updated to the official 2.2 yesterday. But now I want to try root.
I've been trying to follow the HBOOT 1.01 guide but there's a few problems. First, I cannot connect to the phone with adb unless it's in htc sync mode. No other mode will work. So when it's time to copy testimage.zip to the card I have to change from sync mode to disk mode, whereby adb loses it's connection. What do I do about this? Is it a driver problem (in Win7 here) or something else?
Thanks,
Dave.

Ok, the first problem were drivers.
Now I can't finish the second guide. When I try using clockwork to install the firmware.zip, the phone just boots to the red triangle. What do I have to do?
Dave.

So I pressed the up button/power combo at the red triangle and get the Android system recovery. Selecting "apply update.zip" says it can't verify. What do I do? Is this guide for my phone or do I need to follow something else?

I don't understand this guys. Anyone help? I'm thinking since this is a step to root the phone, I'm not actually rooted yet so I can't use the clockworkmod? Then what is the guide for? The guides at unlockr don't mention what firmware/hboot they work for so I'm not keen to try them yet.

Read the guide on fake flash. You need the recovery file named "update.zip" in the root of your sd to proceed..
Sent from my Legend using XDA App

whitetigerdk said:
Read the guide on fake flash. You need the recovery file named "update.zip" in the root of your sd to proceed..
Sent from my Legend using XDA App
Click to expand...
Click to collapse
But isn't that what Rom Manager does? Download the update.zip then run it? Man this is getting even harder to understand.
Edit: And this is left out of the HBOOT 1.01 guide because.....????? When I work this out I'll write a PROPPER guide, lol.

Just checked and update.zip is on the card.
So which part of the guide am I getting wrong?

Decided to reinstall phone with the official froyo release and am now ready to try this again. Is there anyone that will walk me through the process? I will write a complete guide if the "gotchas" are still there.

i feel for you ... hope you get it fixed... thats one of the reason i havent dared messing with the phone because i've seen a few post like yours where something didnt go quite as described... for whatever reason... and im sure the answer is out there but just not within the guide instructions... i guess there is no way to gather all gotchas because there are so many environment variables...
good luck
and please share your technique

Just saw gobczak's thread in the developer forum having similar troubles with Vodafone UK phone, getting the red triangle at reboot. I'll keep an eye on his thread and see how he goes with it.

Did you run the stage1 and stage2 bats while in recovery?

dezzadk said:
Did you run the stage1 and stage2 bats while in recovery?
Click to expand...
Click to collapse
No because the guide didn't say to.
The thing is it seems I'm only stuck on the part where the firmware.zip file has to be flashed. The guide says to use clockworkmod for this. But when I try installing the clockworkmod recovery it gives some file verification error. Isn't there ways to do this via the pc, either through those batch files, adb etc? Or will that fake-flash update.zip file work?

jabbado said:
No because the guide didn't say to.
Click to expand...
Click to collapse
As I just posted on the other forum, I think you need to skip that step in guide 2 and go straight onto guide 3 after you have flashed the LEGEIMG.zip, rebooted, and then removed LEGEIMG.zip from the SD card.

Guys I've got to the point of downgrading to 1.31. But when I run the first batch file it just hangs at the "Writing zip" part, with the htc logo on the screen. Is there any way to fix this?

Can someone please explain this part of the guide:
Phone will reboot and find LEGEIMG.zip on your sdcard, copy it into RAM and check it. If you get CID error at this point, then you don't have goldcard.
Click to expand...
Click to collapse
Ok, so I don't get an error. I get nothing. The phone just boots to the fastboot screen. If I press the power button it goes to the hboot screen and I can see the messages of loading LEGEIMG.zip. But the guide doesn't say to press anything.
So should I or shouldn't I press the power button? Also, if I try making the goldcard again, at which point in the guide do I start from again? The entire process or just copying LEGEIMG.zip to card then rebooting phone? I mean, will all the other things like flashing misc1-2.img still be there?

Guys I finally got this working.
The first problem was with the goldcards. For whatever reason formatting them with the win7 format tool just wouldn't work. I had to use the command-line format tool, setting the block size etc manually.
The second problem was the unnecessary steps in the guide. A few people helped me out with this (namely blackbart at the Aus Whirlpool forum), but basically in the second step you can stop after flashing the LEGEIMG.zip. The updating froyo part isn't needed - for my phone anyway.
Then when running the batch files in the third part, for whatever reason the first batch would keep hanging at 'writing zip...' and I needed to remove the battery to unfreeze the phone. flannigan, also from the Aus Whirlpool forums suggested to just go on to the second batch file. This worked!
So my Legend is now finally a true Legend
Anyway, thanks for the help everyone - couldn't have done this by myself.
Dave

Great news, I think we need a new guide focused on rooting for HBOOT 1.01 / Stock Froyo to clear up the inconsistencies in the existing one. It's a minefield for a noob (or a rite of passage!), a revised guide will certainly save a lot of time and frustration for those taking this road in the future.
Sent from my HTC Legend using XDA App

EpicSauce said:
Great news, I think we need a new guide focused on rooting for HBOOT 1.01 to clear up the inconsistencies in the existing one. It's a minefield for a noob (or a rite of passage!), a revised guide will certainly save a lot of time and frustration for those taking this road in the future.
Click to expand...
Click to collapse
I'll write one if ya's want. I wanted to include little tidbits like downloading the apps required (visionary, rom manager etc) from the market then backing them up to the card with Astro so if it goes all wrong and you have to start again, you can just install them all from the card Also on using adb to push the files (roms, img's etc) when the guides say "copy this blah blah". Much quicker than changing to disk mode and back. Sound good?

Sounds good! Happy to help and add my 20c worth along the way. The existing guide has got the meaty bits, a new guide would cull the stuff not relevant, help fill in the gaps and alert to the pitfalls we've fallen into.

jabbado said:
I'll write one if ya's want. I wanted to include little tidbits like downloading the apps required (visionary, rom manager etc) from the market then backing them up to the card with Astro so if it goes all wrong and you have to start again, you can just install them all from the card Also on using adb to push the files (roms, img's etc) when the guides say "copy this blah blah". Much quicker than changing to disk mode and back. Sound good?
Click to expand...
Click to collapse
I agree... i've done my reading since june of last year but then didnt check for another 4 months... and so many how to's pop up with various ways of doing it depeding on the situation... a lot of those howtos were consolidated howtos which sometimes make intermediate steps unenecessary (may be in some cases causes more head aches since it didnt take into considerations on newer version of hboots...etc)... an updated how to will be much appreciated...
And you're right the most important pre requirement is to have a safety net ... so starting with how to create a back up in case you screw it up is a must!
but im glad it worked out for you!

[Q] current rooting/2.3 instructions

As the thread title states, I'm looking for info on the steps to root my stock MT4g, and install the new ROM that's floating around. I'm pretty technically capable, but the info I've found looks slightly dated. When I was active in the iPhone jailbreak scene, using old directions could brick a phone pretty easy, or prevent future jailbreaking. I haven't kept up with this scene enough to be able to know what's dated and what isn't.
This is my current plan, please correct it if I'm missing anything or have it wrong.
(based on wiki.cyanogenmod.com/index.php?title=TMobile_myTouch_4G:_Full_Update_Guide)
I've got ADB going
I need a backup solution for app data right? What's my best option here?
Once backed up, I plan to install busybox, Superuser package & Temporary Root package via ADB
Use gfree to make that root permanent
Install ClockworkMod recovery
Reboot into recovery, and install faux123's ROM
Does that sound correct, and did I skip anything? Any input at all is welcome, I'd like to stand tall on the backs of giants.

There are two popular methods floating around
You can either use the Root.sh method [ Found Here ]
Or the ./gfree method [ Found here ]
Either method will work perfectly. I've used both and can say with confidence they work.
The Cyanogen method can be goofy at times. I've see alot of people say they cannot get it working for them. I'd rock one of the two above. You shouldn't have a problem either way.

Thanks a ton for the info, I'll go at it this evening. As far as backup process, I do the temporary root, use ASTRO to make a zip? Most of the data on my phone lives at google, but I'm wondering the best way to retain apps, or should I just make a list and reinstall from the store after flashing?

lars.oakland said:
Thanks a ton for the info, I'll go at it this evening. As far as backup process, I do the temporary root, use ASTRO to make a zip? Most of the data on my phone lives at google, but I'm wondering the best way to retain apps, or should I just make a list and reinstall from the store after flashing?
Click to expand...
Click to collapse
For backing up apps and data, use titanium backup. for backing up your whole phone, use the backup feature in clockworkmod recovery after you've flashed it via rom manager after permarooting.

lars.oakland said:
Thanks a ton for the info, I'll go at it this evening. As far as backup process, I do the temporary root, use ASTRO to make a zip? Most of the data on my phone lives at google, but I'm wondering the best way to retain apps, or should I just make a list and reinstall from the store after flashing?
Click to expand...
Click to collapse
The best way to back up your Data and Applications is like mentioned above is Titanium Backup. The free version will work well but i recommend the paid one.
as far as a snap shot of the entire ROM incase you want to go back to it. reboot into recovery > backup/restore > backup. And it will do the rest.

Well I made it halfway there, but didn't nail the whole thing. I've got permanent root access (yay) now, and was able to make backups via Titanium. I then rebooted the phone into "recovery" using the ROM Manager from Clockwork. First boot had a red exclamation mark, I unplugged the handset from the USB and tried a second time. After that, I was greeted with the Orange and black interface, and selected "restore to factory". I then started searching for the cache clearing, which changed verbage between 3.x and 4.x releases of Clockwork. After exploring the menus a little, the phone reboots itself from this screen. My blood-pressure goes up, and I worry my toy just became a b-word. Not all was lost though, and the phone happily booted into the stock t-mobile welcome wizard.
I still have superUser installed, and still have root (S=OFF I guess?). I install ROM Manager again, and do the "Flash ClockworkMod Recovery" (which now shows both current and latest recovery as ClockworkMod 3.0.2.4). When I choose Reboot into Recovery however, it reboots back to the MyTouch 4G logo screen (non-animated one), and hangs. After some reading I tried to force recovery boot via ADB, which produced the same result as the soft reset from ROM Manager. After that I tried doing it the manual way with holding the volume button, which launched me into what I believe is a stock recovery console (white with colored options, uses vol +/- and power to navigate). Choosing "recovery" from that screen *also* produces the white logo screen hang.
So my question now is, in it's current state; how can I get to the Clockwork recovery again? From there I bet installing the image will be easy street, but I believe I'm stuck for now.
Side-note: the phone functions fine on regular boots and pure vanilla mode; I just don't want to stop here when I'm pretty close to my 2.3 goal

Well good news and bad news. I was able to get Clockwork going by reverting it to 3.0.0.5 and just using that version. Was able to install ROMs, tested a few. Phone started freezing after/during installing packages. Started the clear cache/install ROM process, ran into this:
Code:
Flashing Kernal ...
assert failed: write_raw_image("/tmp/boot.img","boot")
E:Error in /sdcard/download/virtuous_fusion-glacier-rom-v1.0.9.zip
(Status 7)
Installation aborted
http://forum.xda-developers.com/showthread.php?p=14389074
Totally stuck at boot screen, but able to get into Clockwork. All ROM zips off the sdcard produce this or an invalid zip error.

Other guy smight tell you what a status 7 might be, but with the flurry of flashing youre doing, you may have gotten some corruption on your sd
try formatting your sd card in the pc, or use another one so you dont have to back everything up on this one. put one rom zip on the root and see if that helps
also, i would make super sure you wiped/factory resetted every possible data/cache in CWM before flashing the zip
lastly, i would md5 test the download to make sure it matches the web page. Plus, after it's transferred to the cleanly-formetted sd, check it again either thru adb, or do the trans on the pc using an sdcard reader and check it once it's on the sdcard, then pop it into back your phone.
good luck

Thanks a ton for the uber fast reply. When I format on the PC, what format do I use, or is there a specific tool to properly format it for the phone?
When I'm wiping /data it's taking forever and I get the following message back:
Code:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log/last_log
E:Can't open /cache/recovery/log/last_log
Don't have an adapter at the office today for the sdcard, but I guess I can just grab a new one at lunch? All it would need is a fresh format then the .zip of the ROM in question at the root?

Looks like your partitions are corrupted. Flash PD15IMG to restore the phone to stock, and progress from there.
When you format the SD card, just format it regularly in the PC.

Jack_R1 said:
Looks like your partitions are corrupted. Flash PD15IMG to restore the phone to stock, and progress from there.
When you format the SD card, just format it regularly in the PC.
Click to expand...
Click to collapse
So I use the same PD15IMG.zip i did to start, flash it using Clockwork, then start the root > rom process over? I think that it currently tells me it can't find that zip anymore on the white screen pre console, is that expected? I just xfer it to the sdcard prior to fixing?

Yes, that's the right procedure. Move it to the card and start from scratch. Beware not to use the newer Panache/MT4G Gingerbread RUU, otherwise you'll be left with no way to root, or at least harder way.

Ok, so I didn't have a PD15IMG.zip to begin with, I see this thread:
http://forum.xda-developers.com/showthread.php?t=1059347
and that's proper that I'm flashing the radio itself for this process? Which of those images do I want to grab? I always like to double check when I read warnings that are pretty specific about bricking the device

No! You're flashing a stock recovery image called a pd15img.zip
The radio does not do a restore to stock, the reason you're confused is that in order to flash a radio for those who nmwish to do that, you rename it to the same name as the recovery zip, but it's really just a radio. It just happens to be the filename that the system looks for to restore. Look for the thread posted by either jjackson or football. That's the full image, just over 300 megabytes, or that neighborhood.

acsi007 said:
No! You're flashing a stock recovery image called a pd15img.zip
The radio does not do a restore to stock, the reason you're confused is that in order to flash a radio for those who nmwish to do that, you rename it to the same name as the recovery zip, but it's really just a radio. It just happens to be the filename that the system looks for to restore. Look for the thread posted by either jjackson or football. That's the full image, just over 300 megabytes, or that neighborhood.
Click to expand...
Click to collapse
Jesus, glad I asked before getting in there.
So I was going to offer you a beer sometime, I think I owe you a few rounds at this point...
Edit: this one right http://forum.xda-developers.com/showthread.php?t=924923 ?

Yup. Read the whole thread. Also look for football,s thread. There are a couple of mentions of undoing gfree first then doing the pd15img. I think jjackson tries to automate those two steps, and football thread just gives you a january-dated pd15img. I can't remember if you rooted gfree or not. Read read read. This is an important step but hundreds have gone back to stock this way without a hitch. That is if you have a good emmc, you have a better chance of avoiding problems...

acsi007 said:
Yup. Read the whole thread. Also look for football,s thread. There are a couple of mentions of undoing gfree first then doing the pd15img. I think jjackson tries to automate those two steps, and football thread just gives you a january-dated pd15img. I can't remember if you rooted gfree or not. Read read read. This is an important step but hundreds have gone back to stock this way without a hitch. That is if you have a good emmc, you have a better chance of avoiding problems...
Click to expand...
Click to collapse
I rooted gfree originally, and think I may be in the bad place
Fail-PU errors running the update from pd15img. Do I have any options at this point? I bought the phone from Wirefly.com, and since I can't get a recovery image going, I may be fuct here on a return eh?

looks like i'm moving to: http://forum.xda-developers.com/showthread.php?p=14487111#post14487111

Good luck Lars. Let us know that they did and if you had to pay.

Need some help restoring - Not A Normal Issue Here!!!

Ok, so I have a Droid X2, and the Droid X and Droid 1 as predecessors. I have never had any major problems, and the few that I couldn't get around I had SBF via RSD for. To my knowledge, there is no form of SBF for the Acer A500 (yet). So heres the issue:
I may have either flashed an update without the proper files to go before it; or I have have forgotton to wipe something. Nonetheless, my A500 wouldn't boot. When I did some research, I went to this site:
{http://forum.ppcgeeks.com/showthread.php?p=2127076#post2127076}
because it seemed in my eyes to have the most pertinent information. I got the update.zip to install and my A500 booted again! However, I could not get to stop two because my insternal SD card was wiped somehow and when I get to the main screen, do the circular unlock, the launcer, and many other programs repeatedly force close, so much so that I cannot do ANYTHING. How would you approach this, and is there a way for me to get into CWM. I have a recent nandroid backup that what 100% functional, and I would hope the MD5 sums would still match....
Any help/advice is greatly appreciated!

you're wrong, this is absolutely normal issue
http://forum.xda-developers.com/showthread.php?t=1159443
follow this link, this will give you yout tablet back fully operational.
in case of any further prob, this links will help you to perform an Hard/Wipe reset
http://forum.xda-developers.com/showthread.php?t=1132760
good luck

xda-dev2k said:
you're wrong, this is absolutely normal issue
http://forum.xda-developers.com/showthread.php?t=1159443
follow this link, this will give you yout tablet back fully operational.
in case of any further prob, this links will help you to perform an Hard/Wipe reset
http://forum.xda-developers.com/showthread.php?t=1132760
good luck
Click to expand...
Click to collapse
The top link provides a way to install via Acer recovery the new 3.1 OS, but to my understanding its unrootable for now, is that still the case?

the update zip is uploadable even without root.
just like the original OTA firmware. Try it, many other users got back their pads with this one, as you can see in internal posts of the thread

xda-dev2k said:
the update zip is uploadable even without root.
just like the original OTA firmware. Try it, many other users got back their pads with this one, as you can see in internal posts of the thread
Click to expand...
Click to collapse
I totally get what you're saying. What I meant is that if I did the update, it completed successfully, that I would then NOT be able to root the device. Obviously that is a better option that a brick! But I'm trying to find out if I can recover to the most updated version that has been rooted.
Maybe I'm wrong and a root program has been made for 3.1?

hey mate, U quite a little lazy readinf threads titles uh...
take a look at this http://forum.xda-developers.com/showthread.php?t=1138228
pick up the 1.3 version. it will root your "definitely final" version of os, this update U have just uploaded IS the last one available, and it's eligible of any further OTA update...
take care

xda-dev2k said:
hey mate, U quite a little lazy readinf threads titles uh...
take a look at this http://forum.xda-developers.com/showthread.php?t=1138228
pick up the 1.3 version. it will root your "definitely final" version of os, this update U have just uploaded IS the last one available, and it's eligible of any further OTA update...
take care
Click to expand...
Click to collapse
I work 70+ hours a week, I'm certainly not lazy. But that is why I ask these questions hoping for someone to give me a little short cut to the answer. Between work and sleep I have 2.75 free hours a day and do NOT want to spend them reading a forum where its a lot of bs banter in between the actual info. I'm sure there are a lot of people out there that just don't read, but I truly don't have the time.
Also, this is one of the biggest forums for Android out there. Theres no way I could ever read the HUNDREDS of threads just on this device alone....
I do appreaciate your help!!!
I'll give a final report when I have a chance to do it!

This method did NOT work. When I boot into recovery, it always goes to the screen with the triangle and the android. I never see a progress bar....does this matter?
I also tried your other suggestion of "wipe device without recovery" and that didnt work as well.
I know its not a lost cause since it boots all the way up. But every app force closes so I have NO access

YOU have to do things in proper steps !!! ( lack of sleep will do that to you ! )
1/ grab the file from that thread
http://forum.xda-developers.com/showthread.php?t=1159443
( remember to unzip it to get update.zip file and placed on your card and flash using normal recovery.... not renaming ! )... assuming you don't have CWM at the moment.
2/ grab the "iconiaroot 1.3" file to root your device ( as CWM and Acer Recovery Installer required root access )
3/ grab the Acer Recovery Installer and proceed to install CWM to your device...
after all those are done... work your way with CWM ( to access CWM ... you need to keep holding the buttons (Power & Volume down) until you see 4 lines of text...and not let go before that !! )
remember to wipe cache & factory reset ( both before and after to ensure 110% cleaned to avoid errors and FC )
good luck !!

UnicornKaz said:
YOU have to do things in proper steps !!! ( lack of sleep will do that to you ! )
1/ grab the file from that thread
http://forum.xda-developers.com/showthread.php?t=1159443
( remember to unzip it to get update.zip file and placed on your card and flash using normal recovery.... not renaming ! )... assuming you don't have CWM at the moment.
2/ grab the "iconiaroot 1.3" file to root your device ( as CWM and Acer Recovery Installer required root access )
3/ grab the Acer Recovery Installer and proceed to install CWM to your device...
after all those are done... work your way with CWM ( to access CWM ... you need to keep holding the buttons (Power & Volume down) until you see 4 lines of text...and not let go before that !! )
remember to wipe cache & factory reset ( both before and after to ensure 110% cleaned to avoid errors and FC )
good luck !!
Click to expand...
Click to collapse
So I responded to this last night, but somehow it disappeared?? Anyways, thank you for your effort to help me resolve this, but if you look at my initial post, there's no way your description and process would work. First of all, the update above I tried (like I mentioned) and it did NOT work. Also from my description I mentioned that when the tablet does boot, it boots to the home screen (stock green) but, all the important applications, the launcer included, force close so rapidly and repeatedly that I can't do ANYTHING. Thus, I would obviously NOT be able to install any programs, let alone root the device.
Thus the name of this thread....

ibrooks123 said:
So I responded to this last night, but somehow it disappeared?? Anyways, thank you for your effort to help me resolve this, but if you look at my initial post, there's no way your description and process would work. First of all, the update above I tried (like I mentioned) and it did NOT work. Also from my description I mentioned that when the tablet does boot, it boots to the home screen (stock green) but, all the important applications, the launcer included, force close so rapidly and repeatedly that I can't do ANYTHING. Thus, I would obviously NOT be able to install any programs, let alone root the device.
Thus the name of this thread....
Click to expand...
Click to collapse
And obviously you are suffering from lack of sleep !!
The update.zip ( after extraction ) from that thread can be flash either normal recovery or CWM recovery.
and here's the added tool to wipe without a recovery:http://forum.xda-developers.com/showthread.php?t=1132760
Therefore... what's stopping you ??
and please re-read my steps above.. after flashing... you will need to root and re-flash CWM using ( Acer Recovery Installer)
maybe you're not clearly looking at the picture...
there are 2 recoveries ( normal Acer stock recovery and CWM recovery )... DO NOT mistake Acer's stock recovery for the program called Acer Recovery Installer.
what Acer recovery Installer does is install CWM recovery for you and also backup/restore your original Acer recovery.
and you cannot use the program until you are rooted ( step #2 above )
FYI ... each recovery boot differently !!
Stock recovery -->> hold Power & volume down ( closest to the power button ) until some text appear 2-3 lines )
CWM recovery invoke differently.... ( hold Power & Volume down until you get 4 lines of text... do not let go anytime earlier then that )
~~~
extract that update.zip file ( my guess is this is where you went wrong... you didn't extract ? )
when you extract... make sure only the update.zip is put on your MicroSD card ( format FAT32 ).... no sub-folder...etc
Then insert into device and use the stock recovery method above.
if all else fail... get a different microSD card !!
then follow steps #2 and #3 from my previous post .
again... what's stopping you ??

I did the steps that E.B. recommended initially (directions followed religiously). Then I did what you posted (twice now,again, religiously - and yes I know how to, and properly extracted the update. !). Furthermore, I also tried a totally different SD card. 8gb pny VS 16gb San disk.