I have 2.2 official, rooted (315) working with the performance upgrade.
Each time I get in to my car, although I have previoulsy paired the phone with the cars bluetooth, it asks me for the password, as if the phone doesnt store the it from one use to the other. Once I put the passord in it works fine.
On my other car it has paired fine and remembers it each time. I don't have to redo the password.
the thing is I was using Froyo 2.2 on my previous phone, an HTC Desire and didn't have this problem on either car.
Is this a phone or car issue and if it is the former, do I need additional software?
I have now flashed Steve's 1.5 Rom and the issue is still there.
What I do not understand is that the HTC Desire was fine on 2.2 but with the Streak it is there, I am asked to input my pairing password everytime I get into the car.
Does the Streak handle its bluetooth differently to the HTC? Is there an app I can use?
Has anybody had a similar problem?
Sorry mate no issues whatsoever with mine and the parrot mki9200 handsfree kit. I'd suggest fiddling around in the phones bluetooth options, and maybe delete the partnerships both on the phone and on the handsfree.
Other tha turning the bluetooth off and on there aren't any other 'settings' that I can find. Its there an equivalent 'tweaks' type as app as you get with win mo that might have some extra settings?
Sent from my Dell Streak using XDA App
The only BT problem I've seen, is with mine...
318 "stock", no other mods.
If I have wi-fi enabled & connected to a wi-fi hotspot, or my home router,
BT conversations will cut in and out, until I turn wi-fi off.
jazzdude555 said:
Other tha turning the bluetooth off and on there aren't any other 'settings' that I can find. Its there an equivalent 'tweaks' type as app as you get with win mo that might have some extra settings?
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
now dont take my word as the word of god as I started androiding since yesterday in the evening only but:
when in car, activate the connection between your handsfree and your phone, then goto bluetooth settings in your phone, tap on the connected device, there will be a bunch of further settings (like what services it would use, etc.)
i think that in your situation however the best advice would be deleting the pairing details both from the phone and from the handsfree.
I usually don't have this problem with my parrot mki9200 handsfree kit, but I have experienced similar things in the past, but that was only when my phone spazzes out and error occurs. Can't remember what errors like but it's usually when random things start force closing and stuff, and the phone is due a full reboot (not forced to reboot but manually rebooted just to refresh the phone) or I need to repair for whatever reason. I either just have to re-enter the passcode and I'm off or when I try to repair the connection, it would connect straightaway without asking for a passcode, but then if I unpair the connection, the system would then prompt me to enter a passcode and entering the passcode would connect the devices together again (even though I'm trying to unpair them).
My advice would be to try doing a fresh pair by establishing a full and stable connection (so probably after you've entered the code and are connected) then unpair on both the phone and the your car kit, then power both systems down (car so the hands free kit powers off and the phone), then start them up again and establish a fresh pair connection and see if that helps. Other than that, I would suggest seeing if there is any firmware updates for your hands free kit cos it might not be fully compatible with the Dell Streak even if you are running 2.2 (I had to do this with my system as it would constantly randomly disconnect then reconnect itself but this went away after a firmware update).
My car s hands free its one of those with no settings, it's just there constantly on ready to pair mode and just adds any phone is in range if that phone is in discovery mode. Its just always like that so it never has a settings section, you just do it on the phone.
My two previous phones, an htc desire with 2.2 and a htc legend both connected flawlessly without any of the pairing issues.
I took the car to the dealer and he said there were no upgrades for it so it is really frustrating to think that the Streak is running the same software as the other phones but for some reason in its architecture it us not compatible with my car. The other annoying thing is that on my other car it works perfectly.
Sent from my Dell Streak using XDA App
Yeah bluetooth can be a major pain in the a55
Sorry to say, but as an extreme measure, hard reset might resolve..
Dell Streak + Tapatalk =
If I use titanium back up can I quickly restore everything as it is here after a heard reset? What is the best way to do this?
Sent from my Dell Streak using XDA App
Related
I have a Parrot CK3300 in one of my vehicles and the Streak will not pair with it. Just says it fails to pair. Any ideas?
Sent from my Dell Streak using XDA App
Daft question but are you putting the right code in?
ameiurus said:
I have a Parrot CK3300 in one of my vehicles and the Streak will not pair with it. Just says it fails to pair. Any ideas?
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Had the same problem with my blueant until I deleted the pairing history on it, it then paired first go
It never gets to the point where it asks for the code. The Parrot says "pairing failed" and the Streak just stops trying to pair.
I tried removing all known devices on the Parrot but still no joy.
Sent from my Dell Streak using XDA App
And you've definietly unpaired/removed the parrot system from your phone? I sometimes have pairing problems but I just remove the parrot system from my phone, reboot my phone, then re-pair them again and its fine again. If no luck, try updating the firmware of the Parrot system.
ameiurus said:
It never gets to the point where it asks for the code. The Parrot says "pairing failed" and the Streak just stops trying to pair.
I tried removing all known devices on the Parrot but still no joy.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Self edited post
The Parrot firmware is 4.15b (the latest). Guess I will just have to wait for 2.2 to be released for the Streak and hope for the best...
Sent from my Dell Streak using XDA App
Just got off the phone with Parrot tech support. They think the Streak is configured to auto-pair and is trying to auto-pair with the code 0000 (which is the standard for auto-pair?). Unfortunately, the Parrot CK3300 code is 1234 and it ain't workin'. Is there any way to disable auto-pair on the Streak? I didn't see anything like that in the Bluetooth menu.
I have no idea dude, but I often get the chance to enter my own code on the Streak, not always, but most of the time, and what I say not always, it's usually when I unpair and repair with the same thing that sometimes I think it remembers it or something so doesn't give me the option to, but I've not had that with my Parrot MKi9200. Have you ever been able to pair the two together or have you had this problem from the get go?
From the get-go. I've never been able to pair my Streak with my CK3300. Every other phone I've ever owned has had no problems.
Parrot told me to load CK3100 firmware on the hands-free and that code has the auto-update fix in it. Yes the CK3100 code will work on the CK3300 but you loose GPS functionality (which doesn't really bother me). MY only issue is finding a WinDoze laptop with bluetooth to update the firmware. I have only MacBooks and there's no update code for it. Hince the need fix the phone instead of the Parrot.....
FYI - Upgrading to Froyo did not fix this issue.
Has anyone been successful pairing a Streak with a Parrot CK3300??????
ameiurus said:
FYI - Upgrading to Froyo did not fix this issue.
Has anyone been successful pairing a Streak with a Parrot CK3300??????
Click to expand...
Click to collapse
Delete the pairing history from the parrot
Paring history is empty. That's the first thing I tried.
Solved!!!!
Ok I FINALLY got my Streak to pair with my CK3300. I'm going to document the steps hopefully helping someone else trying to do this deed.
First step is to upgrade the firmware on the CK3300. You will need to flash the latest CK3100 firmware (4.23 I believe) to the CK3300. Parrot support said this would work but we will see later that it does not. Don't worry, we will flash back to the orig. 3300 code later. You will need a WinDoze PC and the Parrot Software Update Tool located here.
Once you have 3100 code on your 3300 you will be able to auto-pair with the Streak. On the Parrot go to Settings -> Advanced -> Pair with Phone -> auto-pair sync (or something like that). You phone should pair with the Parrot. At this point you SHOULD be good to go but that's not my experience. After a day I lost audio with my Parrot. (relay would click and it would cut out the radio but no audio to the speakers.)
Next step is to restore the CK3300 code on the Parrot. Using the Software Update Tool install the latest 3300 code (4.15b). DO NOT REMOVE THE PAIRING ON YOUR PHONE.
After the Parrot is up and running on the 4.15b code, turn on bluetooth on your Streak and go Settings -> Wireless -> Bluetooth Settings and select the Parrot device that the Streak remembered. You will be prompted to enter the pairing PIN on your streak which is 1234. Hit OK and you should pair up with the Parrot.
YMMV. Hope this helps someone.
Good work ameiurus! Glad you got it sorted in the end dude!
I was wondering if anyone else is having issues with bluetooth on their Archos 101. I can't tell if perhaps my hardware is flaky, or if its a software issue.
Basically, bluetooth seems to work sporadically. Sometimes it pairs like it should, other times it is a fight just to get it to pair with my phone, laptop or bluetooth keyboard. Often times I have to reboot just to get it to pair and it seems to really struggle if both bluetooth AND wifi are enabled.
I'm running the stock current ROM and outside of the android market APK and some basic apps, I haven't done anything wacky or weird to it.
I guess I'm just looking for some validation and/or confirmation and/or possible fixes if any.
Sorry, i have experienced no issues with bluetooth apart from forgetting to switch it on
I have had some issues as well. Paired a set of Motorola S9 bluetooth stereo headphones. They pair and connect fine, but the audio is choppy. It will sound fine for 15-20 seconds and then it will skip, go silent, bring back audio, etc. Tried playing same audio through unit speakers and no problems. I also have an Archos 70 tablet and have no problems with the same headset. Both have been updated with the Froy 2.2. Starting to think it might be a hardware issue with the 101. Anyone have any other thoughts?
Never had it working
I always get paired but not connected. Never have been able to get it to work.
The same problem. Pair, but not connect!
I've never found problem about bluetooth (Archos 101 - firmware version 2.1.08)
Pair & connect with DELL BH200 (Bluetooth Headset) - work fine.
Pair & connect with DELL BT Travel Mouse - work fine.
i'm getting major issues on my new replacement 101. did you ever sort your issues? i'm using latest fw.
its really hit or miss (mostly miss) whether it actually see's any BT devices when it scans. yet wifi works fine 100%
I experiment something very similar with my 101, this both on standard Android and Urukdroid 0.7 or 1.0 :
- very difficult (multiple tries have to be done) to get successfull peering.
- with BT enabled phones
- with BT GPS (G-Sat BT-368i, wich is given in forums to work well on our gen8 devices)
- for the GPS (which is the BT device that interest me) : impossible to have it working directly from GoogleMap, I got some success with "Bluetooth Gps Provider" appli from Market). This device is never shown as connected from the BT Parameters.
Could it be a hardware problem, that is do I have to return the tablet to archos ?
Thanks for your experience feeling about the fiability of the BT on 101 tablet.
It generally works fine for me, but a couple days ago it got stuck, and it would not allow to send me files to other devices until I rebooted the Archos. The same day I was also using bluetooth headphones and the wifi network together, and I had audio stutter problems. It seems that wifi has a negative effect over bluetooth stability.
It works for me... though
Bluetooth is not working on my Archos 101.
When I try "scan for devices" it shows 1 or 2 devices, while my HTC HD2 shows about 5. When I click again on "scan for devices" - sometimes it is howing different device, sometime shows bloothooth adress only.
Evan my HTC can see Archos, it cannot pair with it. Archos never see my HTC.
Zalek
Same here
I can pair with my phone (htc desire hd) but cant connect.
I need my phone connected for gps.
Nobody has a solution ?
No solution ?
Thanks
BT has some issues for me too with an A43.
BT+wifi means i either can't get a proper internet connection, or BT devices disconnect.
quite annoying, because i want to be able to use my BT mouse with the internet browser.
and my jabra halo headset connects in dumb mode (no media/volume controls) most of the time.
which is annoying, because it means my headset is stuck on the volume i last used.
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Think I've sorted out bluetooth problems
I also have had real problems with the bluetooth on Archos 101 - pairing but not connecting, causing "Location & Security" to crash when I attempted to open it (in settings). I updated the firmware to 2.4.19 and then rebooted - still the same problems, so I did a full initialization and hey presto all problems seem to have vanished ! A pain because I've now got to re-download all the apps I had before but at least the tablet is working as it is supposed to.
Hope this helps others.
luiznaufel said:
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Click to expand...
Click to collapse
Hello
How can I backup all my data?
Thks
Followed your instruction however it is not work for me. I am running the last patch (2.4.19)
Thanks
luiznaufel said:
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Click to expand...
Click to collapse
It is not working for me.....
Archos 101 Bluetooth Problem - Known issue?
I'm having the same problems. I contacted Archos support and they told me to do a full reinitialization. This did not resolve the issue.
When scanning for bluetooth devices, nothing shows up until the 5th or so attempt.
The mac address of the discovered device is shown instead of the device name.
When attempting to connect it fails several times, then it pairs but says "paired but not connected."
When I finally connect the audio stutters. It's extremely choppy... useless.
If the bluetooth is left on, the 101 will eventually freeze when the screen sleeps and cannot be woken up by pressing the power button. The green light stays on when this happens. Pressing the button a few times or holding it in reboots the 101.
After reading all the posts I've come to the conclusion that Archos likely knows about this issue.
Archos, if you're reading this, for the sake of your customers, please admit this is a known issue and let us know if it's fixable and when a possible fix may be available.
I encourage everyone to open a ticket with Archos support.
If you purchased your 101 used and it's been registered by the previous owner, you can register it and the registration will be instantly transferred to you.
Create a support account at archos.com
After you create an account you can add products to your account and submit tickets for them.
Firmware: 2.4.81
Board ver: A101IT-V5
OMAP ver: ES1.2
Boot ver: Unknown / 4.04.000000
My bluetooth device: Jensen WTB210. Works fine with several other android devices.
Hi Guys,
I'm having this problem that is driving me nuts, don't really know how to proceed.
I have a car stereo a Kenwood DNX8120, which has parrot bluetooth hands free. It has worked very well in the past on an LG, SonyEricsson and the Nexus One.
On the Nexus S (I bought this used and rooted with CM7, so I don't know about a stock model) the bluetooth connects, then after some time, like 20 seconds, it disconnects. I can play this game forever, it won't stay connected.
I can use one of two methods to connect
1- put the phone in BT discovery and let the kenwood connect to it, or
2- Have the phone connect to the kenwood.
I've tried both with the same results.
I got a.logcat and I see a whole bunch of red entries at the time this happens but I don't know what to make if it and I don't know how to grab these entries to a file.
I have also tried a phone wipe and installed infin1ty's ROM and also the latest CM nightlies. Same friggin result.
I see in recovery there are options to delete dalvik and data but I don't know if they'll help.
can you guys help?
Thanks
Tried another device. The actual hardware could be messed up on either device causing this. Try your LG again to the radio and the try another headset to to the phone. Last but not least try the stock Rom .
P.s. cm7 had an issue on the evolution where by was not given a unique Mac address which caused issues for me connecting 2 cm7 EVOs (they would over write each other).
Hope that helps
Sent from my Nexus S 4G using XDA App
Hi Thanks for the help.
Both LG and SE phones still work fine. I'm unable to find another nexus s so I dunno if this particular one.
But here's a new discovery.
I paired them using the HU. Now when I start the car, the BT connects then after a bit it disconnects. Well now I can go to the *phone* and manually connect to the kenwood and the connection holds!!! I have no idea what is going on with the autoconnect but it can apparenlty hold a connect if I manually initiate it from the phone.
All this time I had been trying to get the kenwwood to do the manual connection (after the auto connection faills) and that never held.
sigh...
Have you tried a headset with the nexus to see how well/bad it works? Also are you on the stock rom? If so take it down to your carrier and ask if you can try it on one of their units.
Hi guys,
I have a very strange problem with my beloved note. After I get in the car and drive off I remember that I have to turn bluetooth on so it can connect to the hands free system. The thing is that it doesn't connect automatically, I have to go into the settings and tap the BT name in order to connect it. If on the other hand if I have BT already enabled on the phone before starting the car, it conmects automatically. With the first version of GB the Note had in November I didn't have this issue, but after the first update it started not to work. Now I am on official unrooted ICS 4.0.3. Never had this problem with any other phone.... Any help would be highly appreciated.
Thanks.
Sent from my GT-N7000 using XDA
Anyone?
Sent from my GT-N7000 using XDA
n.vasiliu said:
Hi guys,
I have a very strange problem with my beloved note. After I get in the car and drive off I remember that I have to turn bluetooth on so it can connect to the hands free system. The thing is that it doesn't connect automatically, I have to go into the settings and tap the BT name in order to connect it. If on the other hand if I have BT already enabled on the phone before starting the car, it conmects automatically. With the first version of GB the Note had in November I didn't have this issue, but after the first update it started not to work. Now I am on official unrooted ICS 4.0.3. Never had this problem with any other phone.... Any help would be highly appreciated.
Click to expand...
Click to collapse
You can try Automatic Bluetooth Toggle PRO (I think there is trial version on Google Play). I don't know if it will help you. If not then I'm sorry you will probably have to go back to GB. I'm still on GB as I was also having issues with bluetooth on stock ICS (CM9-based ROMs worked well though).
Thanks a lot. GB had the same annoying problem though :-(... so it's not that....
Sent from my GT-N7000 using xda app-developers app
Hi,
Did you allow the pairing automatically between the devices?
When you pair at installation, it isn't permanently (= automatic) yet. When you get in your car and pair for a second time, normally your phone asks you if you allow your hands free system to access your phone; at that moment you have to tick "don't ask me again" and "yes" for automatic paring.
You might want to disassociate the two and try a new setup (pairing).
To disassociate, stop the system in your car (that cuts the BT connection between the two), disassociate on the phone (push and hold your hands free system in the BT section of the phone and chose disassociate), reboot your phone (so it forgets your cars BT system) and start pairing all over again.
I would provoke the second connection so you get the "automatic" question to make it work.
Good luck :good:
I have the same problem with the original ICS rom.
Flashing a custom ICS rom fixes this problem.
I tried kingdroid (worked ok)
I tried Cyanogen (phone ok, no media audio over BT but connection OK).
I had a similar problem after upgrade with stock ICS through software update. I couldn't pair Note with Mercedes bluetooth. Galaxy Note recognized Mercedes BT & vice versa, but connection was impossible. I read every forum on internet but no help. Everybody was blaming Samsung and ICS. Some suggested resseting Note to factory default, others downloading bluetooth app etc.
Until...I finally figured out that something was confusing my car's BT, so I resseted car system, and the problem was solved.
Sent from my GT-N7000 using xda app-developers app
These is a twist with "old" BT systems and ICS: Old BT systems want you to insert a pin code, ICS wants you to to confirm a code that the BT system sends and that ICS shows on the screen.
It's obvious that that ICS on an old system can be a hassle.
A work around is to put the car in discover mode (so it shows the pin code) and then send a contact (or a picture) from the phone to the car system. As the car replies, your phone will show the possibility to insert the PIN Code.
After that your system should work.
At second connection make the pairing automatic (as I described above) and you're happy.
(This is not my discovery, I found this solution on the SE XPeria Ray forum as I had problems with my wifes phone )
Thaks a lot. I will try as soon as I get the chance and will let you guys know.
Sent from my GT-N7000 using xda app-developers app
So with the workaround mentioned above - it doesn't work. When turning on bt on the phone it won't automatically connect to the car.
Sent from my GT-N7000 using xda app-developers app
Try A2DP Volume on the market.
I have the same problem as you. I used a leaked ics rom on my galaxy s2 and also had the same problem we now have on our ics galaxy notes. My car's head unit is a 3 year old eclipse cd5030. For the last month ive just been manually pairing it every time. PITA. Ill try the workaround suggested earlier in this thread and let you know. Otherwise i think cyanogen mod rom may work.
Sent from my GT-N7000 using Tapatalk 2
Let me know. I am.not going through the trouble of putting anoyher ROM on the phone.just for that
Sent from my GT-N7000 using xda app-developers app
n.vasiliu said:
Let me know. I am.not going through the trouble of putting anoyher ROM on the phone.just for that
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I had similar issues with Parrot 9200 kit in my car. Paired automatically under GB but on stock ICS wouldn't pair unprompted. Sometimes it would but only after minutes.
I'm on Paranoid Android 0.4 now which is CM9 based. It's better but often still slow to pair unprompted. Main improvement for me is that the phone doesn't carry on playing music through its own speaker, like it did on stock ICS, when I turn off the engine.
There is an app on the market called "Auto Connect 2.0", but it is only available for ICS and above Android versions
atiesfo the
i have same problem with my note, but with my Galaxy S1 works fine, when i upgrade the android to 4.0.4 solves the problem.
I have 3 main devices that I pair to my phone via bluetooth: watch/lg tone/car
The watch stays paired with no issues, but the watch is having issues swapping from the lg tones to the car and vice versa.
Anyone found a remedy for this?
As of now, I have to go into the bluetooth settings of the one I don't want to use and deselect media/phone, then go to the other and select media/phone. And even sometimes this takes multiple times to work.
My previous phone (gs7) had no issues swapping from the two.
Hi,
Did you get a solution ? I face the same problem and can't find any solution...
Just to clarify, when you are in your car and want to connect to it, the headphones are turned off, correct?
Having similar issues... Every time I try to connect to my car (stock Subaru WRX), I have to manually connect and it takes several attempts before it connects. Once it connects it usually doesn't drop though. Very frustrating...
Another poster resorted to getting a whole new head unit: https://forum.xda-developers.com/oneplus-5/help/sony-xav-ax100-bluetooth-issues-t3634940
ArkAngel06 said:
Just to clarify, when you are in your car and want to connect to it, the headphones are turned off, correct?
Click to expand...
Click to collapse
It's not in my car but with the bluetooth device of my motorcycle helmet. The reference is ncom bluetooth kit 3. I have to connect it manually and it takes several attempts before it connects. Sometimes it doesn't connect at all....
I have 2 headset Plantronics Backbeat Pro and Plantronics Backbeat Fit. They both work flawlessly
My Huawei Watch also works.
But my Nokia 616 Car kit wont connect at all.
And my motorcycle hemlet bluetooth kit, Cardo scala rider PACKTALK, connects, but the audio is slowed down to about 80 percent?
Same thing here.
I have been facing problems with a Sony SBH52 Headset and with my Opel Corsa E, stock infotainment system.
It gives me a hard time connecting but when it does it's stable.
I had the same with my gen 1 Moto 360 but after a factory reset to the watch and a reboot it's stable.
Sent from my ONEPLUS A5000 using Tapatalk
yubimusubi said:
Having similar issues... Every time I try to connect to my car (stock Subaru WRX), I have to manually connect and it takes several attempts before it connects. Once it connects it usually doesn't drop though. Very frustrating...
Another poster resorted to getting a whole new head unit: https://forum.xda-developers.com/oneplus-5/help/sony-xav-ax100-bluetooth-issues-t3634940
Click to expand...
Click to collapse
I had the same issue with my TSX. I did some research and cleared the cache. Worked like a charm afterwards. Did not have the issue one week since doing that
suizdude said:
I had the same issue with my TSX. I did some research and cleared the cache. Worked like a charm afterwards. Did not have the issue one week since doing that
Click to expand...
Click to collapse
Ahem, I seem to be unable to find bluetooth in my app settings. Can you please give me a hint?
It's been driving me crazy these days with my SBH-52 and I want to try this too.
Thanks!
P.S.
I'll also give it a shot with a plantronics pro headset I have to see if it does the same.
Bluetooth profiles implementations, even though they passed certification, are not always made equal! So don't end up pulling your hair if a certain BT device doesn't play nice with another.
Just as an example... Head Unit X had big issues with the initial contacts sync, right after pairing with Samsung phones (already known to sometimes play around some other standards). It would only work after several reconnects. After several weeks of debugging (poor development guys) and reproduction test (poor testing guys) it was concluded that it is a phone issue caused by some wrong timing delays in the process of exchanging information between the HU and the phone. Samsung was informed and the ticket was internally closed.
I have similar problem with Bluetooth Earbuds. Phone simple doesn't "see" the Earbuds. But strange - it can see other Bluetooth devices and other devices can see Earbuds.
I'm sure this is a OnePlus 5 software problem.
Version OxygenOS 4.5.10
i have somhow issue as urs, i have Bluetooth pad lock and android watch, it sometimes connected and sometimes not, i do believe its software issue, im on 4.5.11
Yes, it is strange. After some restarts and on/offs connection suddenly appears