Hello and sry for my bad Englisch at the beginning.
So my Question ist: Is there any Automaticly Proxy changer, to set up the settings?
If not, then it would be time to create a usefull app.
My Idea is, for example:
You are Connecting you with the internet (wlan) and you have access to the internet at home (without proxy setting), you are going in to school and you must set up the proxysettings. My Idea is, to create an app, that runs in the background, and reads the connectivity status, if for example the phone is connectet to the router xyz, it should automaticly change the proxy settings, if you are at home, and you are connecting to another router, the settings gets resettet.
Is there any app, that can do that?
Or can someone here programm a little useful app for the peoples.
Kind regards
Last time I tried to do something like this, it needed some system protected authorization, I didn't checked again.
Since there is now a UI for that, it may be possible...
Hmm, it should look something like that:
Main (where The Network list is):
img827.imageshack.us/img827/9176/mainfk.png
And the Config Menu (apeears when you select a Network):
img703.imageshack.us/img703/9008/setr.png
The Settings should be saves in an ini file on the sd card.
I am not a good Programmer, and i need help from pros
regards
Related
I'm using an XDA2 with the latest public ROM version from O2.
I have three GPRS connections that I use - the Internet, a work VPN, and WAP.
For day to day work I tend to use just the Internet and work VPN. Sometimes, however, I also use WAP.
Is there an easy way of connecting to WAP WITHOUT having to go into the connection manager and change my Internet settings from the Internet connection to the WAP connection?
Or, is there a better Connection Manager out there that can handle more than 2 connections?
Or, finally, is there a way to detect that a WAP connection is needed, and connect as required?
An alternative would be a program that allows you to, with the click of a button, select the two connections that you want to use (i.e. profile 1 is VPN and WAP and profile 2 is VPN and Internet).
Thanks!
I have exactly the same problem.
Too many operations to change the connection!!!
Someone any ideas?
Same here .. Having the same issue ..
It is inefficient to change the connection through Conn Manager ..
Perhaps can we do it through registry change? i.e. create several registry files, and just click the one we need when we want to connect to certain profile ..
Tried to look through the registry setting for Conn Manager, but it is confusing, they are using so many {436EF144- ....}, {18AD9FBD- ..} thingy
Maybe some expert can help here?
Thanks
Back From The Grave!!!
I was wondering the same thing!
I hate to say it, but the iPhone does wifi much simpler than Windows Mobile -- just flick a software switch and you're on, no changing settings, and no changing back when you go offline.
It's over 10 taps in Windows Mobile to do the same thing! I know there just HAS to be a simpler way to do this!
you can make you life a easier if you create a shortcut of the remnet.exe (inside the windows directory) to the start menu folder
rename "shortcut to remnet" to "connections"
Hello,
i've been searching around the web for a definitive explanation of the communication settings (Wep, Wap, GPRS, Internet, ISP, Wlan, etc.) in WM2006.
I can usually fiddle my way through setting something up, that seems to work...but i never know exactly why or what i did!
Now that i've got the HTC tytnII with built in Wlan this has become even more complicated.
For example, sometimes when i have an active Wlan connection and am surfing the internet, the phone connection pops up and asks me to connect via GPRS (Wap or Wep).
This is something that i've been confused about for some time anyway: how doese the unit know which way it should connect to the internet when i start an application?
IN any case, i've now been searching for a definitive explanation of the various settings contained in WM6.
Is there somewhere a good explanation of how it all works, so that i can understand the various settings?
Thanks in advance for any help....
tjohnso1 said:
Hello,
i've been searching around the web for a definitive explanation of the communication settings (Wep, Wap, GPRS, Internet, ISP, Wlan, etc.) in WM2006.
Click to expand...
Click to collapse
Same here, I'd also like to know the difference.
For example, right now I seem to be able to configure a specific network connection to use for my Gmail synchronization. However, this ranges from 'The Internet' to 'My Internet', and just don't forget 'Work'.
Having a more profound understanding of these 'networks' and how to properly configure them is vital in this day where devices can also connect to the net using USB/ActiveSync and Wifi.
i dont know if anyone can help me with this or i am just being thick and its allready possible to do, but i am having a horrible time with setting up my applications and using the internet.
I use quite a few applications that ask for either a network (Resco for acessing my files on my computer) and also the internet (mail, PIE etc).
i cant seem to strike a balance between these programs and the possible connections (Wi-fi / gprs), if i set up my internet connection as a proxy with the deatils for my acess point at home then i can get my files on my comp and acess to the internet. but as soon as i leave the bubble of my home then everything goes haywire.
is there a way to set up a hieracy and advanced rules for what connections to use for what programs and when? and possibly an option to ask before dialing a gprs connection?
any help would be great
thanks all
I am wondering where the password information is stored for the cingular gprs settings. I am not asking how to enter the settings into the dialogues, rather where in the registrythe password info is stored.
I am aware of the settings located at these two locations...
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}]
and
[HKEY_CURRENT_USER\Comm\RasBook\My ISP GPRS]
Exporting/importing these restores everything but the username/password info. What I am trying to do is save the settings so I will be able to more quickly restore them after a hard reset, which I do often because I am constantly playing with different roms.
or... is there already a premade cab file that will install the needed settings including cingular's generic username/password?
and for that matter, where is the password stored for activesync? After I import a reg file I have on my phone, I have all the activesync info properly entered except for the password.
I realize these are one time items to have to enter, but it would certainly make system rebuilding go a bit faster...
I hope you managed to get this far into this rather overly verbose essay.
found it.
hell yes:
[HKEY_LOCAL_MACHINE\Comm\Security\CredMan\Creds]
I am cool.
Okay, the question I have then is how did you figure it out, and more importantly, how do you know which key is associated to which connection?
Some crappy registry snapshot program
It is called ssnap, that coupled with a program called idiff, I was able to discover changes made to the registry after doing something (check/uncheck something, enter a setting, etc...)
http://s-k.al.ru/wince.html
If anyone knows a better program than these rather primitive monsters, please let me know. I am looking for something similar to installwatch for the PC by Epsilon Squared.
Those settings did not work anyway. That was definately the location where the settings were stored, but they must be coupled with something else. I was able to install and uninstall the username/password by setting/removing those registry entries, but after a hard reset, they did not work anymore.
Hi,
Being a mobile device, it gets used in many places, with many WiFi networks.
Setting the various networking parameters involves opening several different setup screens and (often) fiddling around with entering IP addresses, proxies, etc.
Does anyone know of a utility that allows the easy setting of DHCP vs fixed IP, maybe DNS servers and proxy vs no proxy? And, perhaps more importantly, a utility that both does this and remembers the settings for the various networks, allowing a rapid setup on the second and later connections?
Regards,
Geoff.
Sad but am replying to my own message.
Am I the only one that regularly connects to networks with different parameters?
Am still hopeful that someone will know of a utility to store network parameters and allow same to be set with one tap - or someone clever will make such a utility??
Hi Geoff,
No you're not the only one.
Have you found something yet? I could do with the same!
Michael
Here's another vote for such a utility, i'd love to be able to use mine at hoem and work without having to dig through several menus to get there.
What about a CAB install with different settings..
Same here mate. I am looking into XML cab files, that modify your network card settings eg DHCP \ Fixed IP and also changing over the Wireless network settings, eg SSID, WEP Keys etc.
Its easy enough to create a shortcut to a CAB file, and one that just changes a few registry settings operates very quickly.
Yes, its a manual workaround.
Yes a application that detects the loss of one WIFI and attempts you connect the others in your device and then configures the WLan card accordingly (DHCP\Fixed IP etc) would be very handy.
No - I haven't got very far yet, I took the idea from another thread where someone used it to RESTORE their WIFI settings after a cold-reset.
Kudos to
http://forum.xda-developers.com/showthread.php?t=309855
http://forum.xda-developers.com/showthread.php?t=277727
for putting me on the path..
I want to automatically select the default network to which the device connects
(the first combo in Settings->WirelessControls->menu->Connections->Advanced->SelectNetworks -
See attached image)
My problem is as follows -
When I set up the connection to the operator -
it sets the default network to be <<3G Portal>>
I want to automatically change it to <<Internet 3G>>
(Or in the worst case -
Automatically delete the <<3G Portal>> -
making the <<Internet 3G>> the only available option -
which will force it to be default)
Does anyone know how to do this ?
(Even if some Cpp/C# code is needed - does anyone know the API ?)
Thanks
Not a lot of sense there
Looking at the screen print
The phone is set up to access the web FIRST via the 3G portal (every phone needs a portal to get online).
The second option looks to me to be a WIFI connection. Wifi always take priority over gprs/3g/hspa
so unless you can make a bit more clear what your looking for......................
http://www.filesaveas.com/gprs.html
Of course, if you mean a different web access point get the APN settings and manualy add then from the settings menu - wireless and networks access point names - press the menu button - add apn
As I understand your Q, you wanna auto set the default network without having to manually change it everytime you hard reset / change roms?
Here's what I do for such things.
Get ceregistry editor, connect to your phone, export the registry to file, then, on the phone, change the default access point to the one you would rather it was, (possibly reboot phone here to be sure the registry has changed the default apn,) back into ceregistry editor, compare current registry to the snapshot, figure out which key changed, and to what value, then provision that reg key (via a cab, or provxml,) whenever you hard reset, after the network has been set up. (I have a cab with dozens of tweaks in it,you can just keep adding to it)
johnerz said:
Not a lot of sense there
Looking at the screen print
The phone is set up to access the web FIRST via the 3G portal (every phone needs a portal to get online).
The second option looks to me to be a WIFI connection. Wifi always take priority over gprs/3g/hspa
so unless you can make a bit more clear what your looking for......................
http://www.filesaveas.com/gprs.html
Of course, if you mean a different web access point get the APN settings and manualy add then from the settings menu - wireless and networks access point names - press the menu button - add apn
Click to expand...
Click to collapse
Thanks for the reply.
Both connections are over the Cellular network.
The first one (3G Portal) is set up by the operator to go via some proxies and stuff, which block certain services/sites as they are not stored on this proxy.
The Second one is "unfiltered" internet connection over the Cellular network.
Whenever the network is detected and set up, the settings are automaticelly set to go via the "proxied" connection.
I want to change it to work over the unfiltered connection.
I would like to know the registry keys or any other place this information is kept, so I could automatically change it.
I tried searching the registry for these values but could not get to a definite conclusion about where exactly the "default connection" is stored, or if it is stored in the registry altogether.
(If it is stored in the registry - I do NOT want a complete registry import/export - just the relevant keys)
Many thanks in advance.
Yes it is stored in the reg, but it stores an ID for each connection which is different for everyone, hence the method I suggested which would reveal both the key and the ID, I wasn't suggesting you import a whole registry, simply make a cab of just the one key. It would take about 10 mins to do, but I'm not running winmo so can't lookup the key for you.
Som30ne said:
Thanks for the reply.
Both connections are over the Cellular network.
The first one (3G Portal) is set up by the operator to go via some proxies and stuff, which block certain services/sites as they are not stored on this proxy.
The Second one is "unfiltered" internet connection over the Cellular network.
Whenever the network is detected and set up, the settings are automaticelly set to go via the "proxied" connection.
I want to change it to work over the unfiltered connection.
I would like to know the registry keys or any other place this information is kept, so I could automatically change it.
I tried searching the registry for these values but could not get to a definite conclusion about where exactly the "default connection" is stored, or if it is stored in the registry altogether.
(If it is stored in the registry - I do NOT want a complete registry import/export - just the relevant keys)
Many thanks in advance.
Click to expand...
Click to collapse
Try using Data Controller by Red Frogfish. With this app, you can turn on and off all of your different connections indvidually.
Since, I have T-Mobile, I have the following connections:
T-Mobile Data
T-Mobile MMS
T-Mobile Internet
And, Data Controller lets turn each on or off as needed/wanted.
Rob
samsamuel said:
Yes it is stored in the reg, but it stores an ID for each connection which is different for everyone, hence the method I suggested which would reveal both the key and the ID, I wasn't suggesting you import a whole registry, simply make a cab of just the one key. It would take about 10 mins to do, but I'm not running winmo so can't lookup the key for you.
Click to expand...
Click to collapse
Ok, thanks.
I will try this method.