I have a AT&T Tab (running a European build) and it's working perfect in all respects (phone, 3G , all excellent)
What is the best version to get it back to AT&T firmware for warranty.
I also read that you need to have AT&T firmware before you use an unlock code from AT&T. I see several of the Cell Unlocker sites offering 4.99 for codes for the Tab.
I do see the firmware on Samfirmware, but need to know what works
ANy advise would be great.
Related
Hi all.
I have a G930P just unlocked (USB/hardware method via GSMZambia). Currently has older OTA-restricted ROM to allow the unlock.
I'd like to update to the newest G930U firmware to get rid of all the Sprint stuff.
We are Verizon (USA) customers, and will uset he phone on the VZW network. I have already confirmed this works after the unlock (using the SIM from my own VZW S7).
Question is:
Which G930U firmware do I use? on the download pages they are specified for Sprint, Veriozn, AT&T etc.
Do I use the G930U for VZW because that will be the carrier? What is teh difference between these, I assume it is the splash screen and which radios are set as the default?
Thanks
Wanted to follow up on this.
After some careful comparison I realized that ALL the "u" firmware files listed - for each of the different carriers - are in fact all the same file. Which make sense b/c it's intended for a phone that starts off life w/ possibility to go to any network.
So after putting the "u" firmware on my formerly Sprint phone, it works flawlessly on Verizon. As far as I can tell all the relative radio bands are working equally well as my other G930V (native Verizon) phone.
Hopefully this will be helpful to somebody else in the future....
who did you get lte and voice to work. for some reason i can only get one or the other to work. not both
DHG4DRAGON8 said:
who did you get lte and voice to work. for some reason i can only get one or the other to work. not both
Click to expand...
Click to collapse
I didn't do anything special at all.
I literally installed the reference ROM, and it worked. It has since auto-updated itself several times, and works flawlessly.
It's my wife's phone, I have a G930V w/ Verizon firmware etc (never done anything special w/ it) and the function the same. Just a few skin differences where Verizon has added extra stuff to mine AFAIK.
hi team.
so i recently unlocked a Galaxy S5 from T-Mobile for resale. The client is using Rogers with the device. I have done this with a galaxy s8+, and i ended up needing to download custom odin, and the unlocked U1 ROM for the s8+ in order to get local services running. (bixby voice, tethering, etc)
what i would like to know, is; 1) Do i follow the same steps to get the services working on the galaxy S5, and 2) if i do, where can i find the ROM i need?
if i dont, then could someone explain to me the steps to fix it?
EDIT:::
I found a ROM Source, but dont know if i should get USA, since it was originally a USA phone, or Canada, because we are using canadian carriers.
Secondly, there is a slew of different ROMs for each region. XAB, XXA, TMK, etc... What do i get?
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Goronok said:
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Click to expand...
Click to collapse
I've heard this as well. If you want those features on a Samsung phone, it has to be at&t branded. I ordered an at&t phone from Samsung since I make good use of wifi calling. It works fine on my unlocked P3XL but no dice on the Samsungs.
I have the same phone and service and when I went to update my imei they told me it could not find the phone. So I was without lte/4g for a day until I gave them a imei to a s8 active. Now I have data at least
Darthshadow666 said:
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
Click to expand...
Click to collapse
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
So I have the same service provider software, on my unlocked s10+, however when I went into an ATT store and looked at a branded S10+
I noticed the service provider software version to be : SOAMC_SM-G975U1_OYM_ATT_PP_0033( thirty three at end),
so anyway to update the service provider version? does that come from the SIM ??
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
beethoven1854 said:
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
Click to expand...
Click to collapse
Where did you get the att firmware?
Sent from my SM-G975U using Tapatalk
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
jamgam said:
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
Click to expand...
Click to collapse
I followed this thread https://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697
At first like you I downloaded the wrong version and nothing changed. I finally flashed G975USQU1ASBA and now have VOLTE/WIFI Calling and of course all of the bloat. But at least those two functions are working. Make sure that you complete a clean flash when I did a dirty flash I had problems sticking on the loading screen.
I believe you just need to call in ATT to take care those carrier specific features .
Which firmware can I flash with Odin to my S10+ Xfinity Mobile unlocked to get AT&T OTA updates? Currently have ASF7 flashed from the latest unknown firmware uploaded to Sammobile. I flashed w/o USERDATA. I just want to be able to get future OTA updates as I just switched my carrier from Metro by T-Mobile to AT&T. I was using U1 US unlocked firmwares on my Note9 & S10+ but want to use carrier perks now with AT&T.
What's with AT&T being the only ones to not release update files? You would think they all would be required to release them. More AT&T customers need kick up a fuss about it.
Hello all,
Newbie here.
I have a galaxy 8+ that I got a few years ago that had US Cellular.
I flashed it to an unlocked bloatfree U1 firmware.
I've been using MVNOs all that time, but now I have ATT service (they have great deals in the US right now) and I want to use att with all the bloat (wifi calling, hd voice, etc).
I'm on G955U1 and need to find stock ATT SM-G955U firmware that will support bootloader 7 (baseband is G955U1UES7DTC1).
Tried Sammobile but it appears as if the firmware they have is for Android 7 supporting bootloader 1.
Not quite sure how to use updato. From what I can see, there are no bootloader 7 firmware packages and the one att package is U1.
Any help will be much appreciated.
Thanks
Wondering if it would be make sense flash to US Cellular using the sammoble firmware.
Problem is it doesn't get me to ATT.
I live in Asia, I just buy a Unlocked ATT s5e form local saller.
First, its running AT&T stock rom android 9 code SM-T727A, LTE working fine with local sim card. But i dont like At&t rom because bloatware; locked some feature; cant OTA update.
Then, i flash it with US Unlock rom XAA like SM-T727U via Odin, Tab boot working but no LTE anymore (just H+ icon and HSPAP in information, if i switch to LTE only will lost connect).
Now i flash swap 3 version of rom ATT unlock T727U, US Unlock XAA, US Cellular T7274R, no one can get LTE back.
Ofcourse i cant find stock ATT rom on internet for flash back.
So any one have solution or stock ATT rom let share for me pls.
So after no good at community support for this tablet. I leave this comment for who come behind me.
I need to buy account for download ATT stock rom on internet, then flash it via Odin, LTE is back.
After that, just stay away from T7274R rom (or any CDMA Carrier rom) you will be fine.
I have SM- T727AUCU2CUD1 firmware ( full stock S5e AT&T rom Android 10 Bin2), contact me [email protected].