i've used blackSTONEhenge for about a year++...
flashed my HD from ver 1 till the latest v3.4..
it's been the best ROM i've used i think... thanks...
however, after installed the V1.6, i cant use my camera.
click at the camera button, but nothing happens.
i've re-flashed beck to SPL 1.14, n install the stock ROM,
the button works, but after a while error message appeared.
it says "problem with device.exe"...
can somebody help me? how can i repair my camera?
hi! i have the same problem, but still can't solve it. Someone says that it's because of dieing motherboard, and only official service can repair the device by replacing motherboard. But i can't understand how flashing the rom can cause damage to the motherboard.
Related
Hi all,
Since last friday I'm the happy owner of an S200, until sunday atleast. After a soft-reset, initiated from windows, my device won't boot anymore. It hangs in the red-green-blue bootloader screen (says: IPL 2.09, SPL 2.09). I've tried soft-resets and hard-resets, but the device would consequently keep hanging in the bootloader.
So for the past few days I've been searching the web and just managed to update the ROM. I was expecting that updating the ROM succesfully would mean my device would boot again, but it still keeps hanging in the bootloader (saying IPL 2.09 SPL 2.15 now, so the update did take place).
Does anyone has any idea whats wrong with my phone? Or how to fix this? Please help.
* bump *
I've been searching further and tried to do a SD dump, but I'm getting the message I don't got enough rights to perform a SD dump. This meens my S200 isn't CID unlocked. Is there any way to CID unlock the device without the need of booting into WM?
The solution to your problem
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
hi syzzer,
i really feel with you - why? - i have the exactly same problem. after i tried to upgrade my rom from o2-germany to another one the device isn't starting anymore and hangs in the beautiful-colored bootloader. and now, if i just even want to re-install the same or another rom, doesnt matter which one, the s200 wont start again. i think this is a really unlucky situation for us to stand alone with our weak pda =) hoping for more help, otherwise we have to take up our warranty and try to get it fixed by the store we did buy it (if a rom-update damage is still in warranty )
good luck
budy!
awechris said:
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
Click to expand...
Click to collapse
in my case, the camera button is not pressed in... i truly don't know what to do hopeless? mhm?
greets!
budy!
hello Syzzer
I have the same problem, but i make a soft reset and it works.
Camera but + Com Button + Power
Wait until message appear.
You Get the message : For Hard reset press send
If you choose other key the system boots normaly.
I had already tried all your suggestions, but nothing seemed to work.
About a month ago I bought a Trinity. In the mean while, I forgot I had put my S200 in my bag and carried it around for a month. When I found it a week ago and started pressing random buttons, it suddenly booted and has been working ever since! The problem has gone as mysterious as it came. I can only imagine there was some hardware failure / dirt in my device that caused the trouble and is now gone / moved to some place it does not do harm. Because I already bought a Trinity, I gave the S200 to my brother. He's been using it ever since and did not have any problems. So keep your head up, there's hope!
I m also having the same problem
Now I am having the same problem, no button is pressed, and I can not install the NVID ROM
Actually I can install only a few ROMs, the NVID ROM was working before on my Neo perfectly but, I think it can be because I have changed many ROMs, from a month, actually I have tried different WM6 ROMs and I used NVID ROMs mostly for Step 1.
Now when I install any ROM, it shows a msg some nbf one after 80% or 95%
It can install the pdaviet first step ROM, but now the problem is that it hangs very much and it can not start Wifi, it has stopped working, a few more ROMs i have tried, but the WIFI is completely stopped.
When I press it in communication manager, it will show busy icon for a few seconds and will not start it in end.(I tried it in both WM5 and WM6, same problem, I also tried after soft reset and hard reset, the problem is still there)
Please someone help me out.
hi all,
i have an htc p 3300, actually used to have... becasuse;
i have tried to upgrade to wm 6.0... no problem seems to appear for the first two days... but then, suddenly screen gone black... i have tired to reboot it but no way... i took the battery away for a while... then it worked... i downgraded to 5.0... but the same problem still exists... now the situation is; if i remove battery for a while, it works; both in bootloader, and normal wm 5.0... i uspl it, flash new rom... but the common things such as 260-270 errors etc... a few times i succeeded to flash new rom... it worked again.. but then screen goes black as if it was broken... it is freezing and getting fade to black...
any body could help me???? i've been working for 3 months.... i bought a new kaiser plus a new iphone... but i miss my arteMISS
hate to say it but in this situation I'm inclined to think that it is a hardware issue.
Sorry you have this issue. I have a service manual for my Wizard/Prodigy.
There may be a way for you to put your ppc into bootloader by using the buttons, and then reflash the rom.
I once had a malfunction flashing the rom and that fixed it. on mine it was [Camera +Reset+release camera] i don't know if that might work, but it is worth a try to put your phone into bootloader first. also, you should remove the battery and hold the power button for a few to make sure that the ram is completely wiped. Flash the official rom and see if that worx.
Good luck.
hi
My artemisis also dead. Afterhard reset it start the bootscreen and nothing als. What must i do ?
Please helo my. Thanks
Hi,
I'm facing a problem with my customer O2 phone. It's showing "No Service with "!" mark. I have upgraded everything .. but nothing changes ..
It's a hardware problem or Software problem ??
Thank You
ive got the same problem.... can anyone help please.
You need to reflash using the 'radio ROM.nbf' file.
My magician's radio, stops working after the unit reboots after doing a ROM update. The radio works immediately after the inital splash screen (before the extended rom autorun). After this, the radio doesn't work.
If I skip the extended ROM instal, by rebooting the device prematurely, the radio still doesn't work.
I've tried many different ROM numbers. I've even downgraded to the stock ones that came with the unit.
Any suggestions?
Hint: My radio only works immediately after a hard reset, but not after rebooting using the extended ROM (customization). (aborting the customization, the radio doesn't work anyway).
it could be barred IMEI
What now works for me, is enabling, then disabling 'Flight-mode" on the phone.
Hi all,
a few days ago I installed IlSalgo 6.5 rom because sometimes i've found my polaris with 3lit3 rom powered off.
This morning after I powered on my polaris it stopped at the first screen (on energy star) and then it shutdown.
I tried with an hard reset while it starts, but nothing changes...
Could you help me?
Thanks in advance,
Reveng3
P.S. sorry for my english
try to put into bootloader; hold camera and press the reset hole.
Then when in this flash your stock rom that was shipped with it or the 6.1 upgrade that was released. See if that brings it back to life!
Let us know what happens after that and go from there.
I tried putting it into bootloader... it shows the colors screen and then shutdown....
But now it works....(finally it stopped on colors screen without power off)
maybe after i removed the microSd (i tried with and without microSd, with and without sim, soft reset, hard reset, bootloader)
this evening i'll try using again my microSd card...
thanks
I have another problem...
i'm trying to change rom.... (pcarvalho eXtreme) because after I restored the rom.... it stopped working again...
in the pcarvalho rom page there is "flash this rom 1st if you have any stability issues" (the original htc rom)
ok, i'm flashing my htc....
i'm on 31% and the update is blocked.....
is there a way to avoid problems? now I think the only thing i can do, is to remove the usb cable or kill the update process....
please help me...
thanks...
Edit: i'm trying with recovery (rom updater utility, after connection blocked, says me to recover.....).... brrr....
Edit2: blocked again on 31%...... please tell me something....
Edit3: All it's ok! After recover, before starting again flashing I used another Rom (my first used.... 3LIT3)... Now it works fine!
Reveng3 said:
I have another problem...
i'm trying to change rom.... (pcarvalho eXtreme) because after I restored the rom.... it stopped working again...
in the pcarvalho rom page there is "flash this rom 1st if you have any stability issues" (the original htc rom)
ok, i'm flashing my htc....
i'm on 31% and the update is blocked.....
is there a way to avoid problems? now I think the only thing i can do, is to remove the usb cable or kill the update process....
please help me...
thanks...
Edit: i'm trying with recovery (rom updater utility, after connection blocked, says me to recover.....).... brrr....
Edit2: blocked again on 31%...... please tell me something....
Edit3: All it's ok! After recover, before starting again flashing I used another Rom (my first used.... 3LIT3)... Now it works fine!
Click to expand...
Click to collapse
check radio version always
Hello,
i have a problem with my hd. i am using energy rom latest version and i cant align my screen. the wizard keeps looping with the cross. i called the service and told me that i should install factory rom and that is not device problem. please advise
thanks
Alexis_vti said:
Hello,
i have a problem with my hd. i am using energy rom latest version and i cant align my screen. the wizard keeps looping with the cross. i called the service and told me that i should install factory rom and that is not device problem. please advise
thanks
Click to expand...
Click to collapse
did you press correctly on every "+" signs (total 5)? else it will repeat the same wizard again and again. another thing is try using stylus to press on the signs, more accurate.
else it could be corrupted rom flash. Did it happened before?
No it didnt happend before.....only when i flash a new rom. i press everything as i should
Go for another ROM. Cloudy maybe?
i will try it and i will let you know....thanks