I'm having trouble getting my computer (and other computers) to Sync with my HD2. I want to flash it to the 3.14 stock rom via SD card. It is currently running the 2.13 ver rom from 4/10. I'm also having some trouble with it randomly restarting and getting stuck at the "stick together" screen.
I've formatted my 2GB SD card and placed the 3.14.1 rom on it named as LEOIMG.nbh in the root directory. I tried to enter the boot loader and it went from the Tri-color screen to the "loading" grey screen with some red numbers above it and then went back ot the tri-color screen where the bottom white part said "Serial" and then the phone got stuck.
I'd like to try to re-flash the phone and see if this cures any problems I'm having with it.
Thoughts? Suggestions?
I had a similar occurence with the same rom. I just popped another rom on and it worked fine. I dont think that rom wants to work when booted straight from SD
did you try another card?
I don't exactly have another card to try it with. Don't exactly have an abundance of MicroSD cards. I've got the 16GB that came w/ the phone and the 2GB that's in my M3DS Real Card for my DS.
The red numbers before it goes back to the tri color screen are 0068002
Fastrax203 said:
the 2GB that's in my M3DS Real Card for my DS.
Click to expand...
Click to collapse
be sure and do a full format, not quick format, fat32 (they often ship fat16) and make sure the block size is 4096 (4k)
I can't flash HSPL b/c I can't sync my phone to my computer. Is there any way to flash HSPL3 w/o syncing the phone?
Fastrax203 said:
I can't flash HSPL b/c I can't sync my phone to my computer. Is there any way to flash HSPL3 w/o syncing the phone?
Click to expand...
Click to collapse
are you the administrator on your computer, that sometimes creates a problem too
I am. I could have sworn I read somewhere that I can flash HSPL via SD Card.
Fastrax203 said:
I am. I could have sworn I read somewhere that I can flash HSPL via SD Card.
Click to expand...
Click to collapse
no, you definitely didnt read that on here.
as for ''without syncing the phone', , , do you mean syncing as in actually connecting to activesync/WMDC? cos if so, forget that, when instruxctions say to get an activesync connection, its badly worded and realy means get a usb connection.
for best results with hspl, put the phone in bootloaer yourself, then connect usb, then run hspl.exe
I've tried putting the phone in bootloader. I must be doing it wrong or something...
Whenever I try to enter bootloader I hold the VolDown key and the End Call key until the phone says "Searching" it never does that. It goes to that grey "Loading..." screen and they goes back to the bootloader and says "SERIAL" at the bottom in the white area. *SiGH* I want my phone to work betterrr!
samsamuel said:
no, you definitely didnt read that on here.
as for ''without syncing the phone', , , do you mean syncing as in actually connecting to activesync/WMDC? cos if so, forget that, when instruxctions say to get an activesync connection, its badly worded and realy means get a usb connection.
for best results with hspl, put the phone in bootloaer yourself, then connect usb, then run hspl.exe
Click to expand...
Click to collapse
Fastrax203 said:
Whenever I try to enter bootloader I hold the VolDown key and the End Call key until the phone says "Searching" it never does that. It goes to that grey "Loading..." screen and they goes back to the bootloader and says "SERIAL" at the bottom in the white area. *SiGH* I want my phone to work betterrr!
Click to expand...
Click to collapse
Dunno if this could work, but I guess the problem is that the bootloader is trying to flash the nbh file on the SD, try samsamuel's advice but first remove the SD card from the slot...
Related
anyone can help me?
.
after check my HD2 version is 1.42, I started the HSPL program, and after some time, it shows "xxxx hacked" on the HD2, but unfortunately, at this time, my computer showed an error, and the HSPL program stopped.
after that, whatever I do, HD2 can't started anymore. It shows an white triangle plus "!" on the screen.
.
what should I do now?
esuper said:
anyone can help me?
.
after check my HD2 version is 1.42, I started the HSPL program, and after some time, it shows "xxxx hacked" on the HD2, but unfortunately, at this time, my computer showed an error, and the HSPL program stopped.
after that, whatever I do, HD2 can't started anymore. It shows an white triangle plus "!" on the screen.
.
what should I do now?
Click to expand...
Click to collapse
extract with winrar the .exe from a stock rom i.e. 1.48 wwe.
copy the .nbh file to your sd card and rename it to leoimg.nbh (format your sd card to fat32 first).
put your sd card to your device.
hold both volup and voldown hardware buttons and reset your device.
follow the steps and hspl will be erased.
gianton said:
extract with winrar the .exe from a stock rom i.e. 1.48 wwe.
copy the .nbh file to your sd card and rename it to leoimg.nbh (format your sd card to fat32 first).
put your sd card to your device.
hold both volup and voldown hardware buttons and reset your device.
follow the steps and hspl will be erased.
Click to expand...
Click to collapse
where can I get the 1.48 wwe.?
put ur serial number in here (assuming you're in the UK)...
http://www.htc.com/uk/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
failing that, get it in here...
http://www.4shared.com/account/home.jsp
I'm not in UK, I'm in china
THEREFORE, the links doesn't work.
By the way, if I follow your instruction and upgrade to rom 1.48, how can I use the HSPL? since it's for 1.42 only.
esuper said:
I'm not in UK, I'm in china
THEREFORE, the links doesn't work.
By the way, if I follow your instruction and upgrade to rom 1.48, how can I use the HSPL? since it's for 1.42 only.
Click to expand...
Click to collapse
It worked for me on the 1.48 ROM. My phone shipped with it, and installing HSPL was the first thing I did so I could flash other ROMS.
I have heard that sometimes, you need to run it more than once if it doesn't work....but for me... it worked the first time.
Mine errored out somewhat similar to the OP's case. I just ran HSPL again and it said it completed successfull.
HINT: Make sure you choose the selection in the end quicly when it asks you if you want to display the ms HACKED on your device. When i clicked NO first time, it errored out and closed. Second time, i hit yes and it was success.
mikron15 said:
Mine errored out somewhat similar to the OP's case. I just ran HSPL again and it said it completed successfull.
HINT: Make sure you choose the selection in the end quicly when it asks you if you want to display the ms HACKED on your device. When i clicked NO first time, it errored out and closed. Second time, i hit yes and it was success.
Click to expand...
Click to collapse
What made you decide to press "no"? Also, make sure not to do anything else but move the mouse from time to time during the flashing. Dont bring up other tools, windows' start menu, use keyboard shortcuts to do anything; in other words, dont touch your keyboard, dont click your mouse, just move your mouse around to ensure it doesn't start the screensaver
Hold down the Volume Down button and "click" the power button to start up the phone in Boot Loader mode with the 3 color screen. You should see "Serial" on the screen. Now, plug in the USB cable to your PC, and the "Serial" should change to "USB". Start up HSPL and try loading it again to your phone.
If it doesn't work, try the same procedure again. I thought I had bricked my phone by trying to load a ROM that wasn't made for my region, and I had to retry loading HSPL 3 times before it worked.
mikron15 said:
.... the selection in the end quicly when it asks you if you want to display the ms HACKED on your device. When i clicked NO first time,
Click to expand...
Click to collapse
lol, it doesn't say "do you want to display hacked"....it says can you see hacked on your display?"
Hi there,
I really need help!
I wanted to flash my phone with a nbh file, but I could not enter my bootloader.
I had installed HSPL3.
Now someone told me to use Flashaholic ROM update utility.
I did this, and a black screen with a % indicator appeared, not too long, it restarted, and went into a white screen with htc in the middle.
Restarting with volume down button pushed doesnt bring me into bootloader.
What can I do now?
I really need help!
Unfortunately, if you can't get your HD2 to boot into the bootloader, there's not much to be done.
Are you sure you had HSPL installed? Because from what I have heard, HSPL is there to always allow you to use it for flashing stuff, regardless of the integrity of other software parts such as the radio or the ROM, so reaching the bootloader should not be a problem for anyone.
Can you connect it to your PC via USB? If you manage to get a connection, you might just have a chance to flash another radio/ROM.
anrabi4 said:
Unfortunately, if you can't get your HD2 to boot into the bootloader, there's not much to be done.
Are you sure you had HSPL installed? Because from what I have heard, HSPL is there to always allow you to use it for flashing stuff, regardless of the integrity of other software parts such as the radio or the ROM, so reaching the bootloader should not be a problem for anyone.
Can you connect it to your PC via USB? If you manage to get a connection, you might just have a chance to flash another radio/ROM.
Click to expand...
Click to collapse
I installed HSPL3, and it said it was succesfull so...
After that I installed a custom rom with an utility that came with it (Dutty's)
So far I know, I cannot get any connection, but I try to download a stock rom (an utility exe) from HTC.com.
But I think this won't work right? because you have to sync.
You could try and flash a stock ROM via the SD Card, see if that works. There are some instructions here on XDA in the ROM Development section, check it out there.
Basically, once you have downloaded an official ROM from htc.com, extract it as if it were an archive and get the ruu_signed.nbh. Rename it to LEOIMG.nbh. Then take your SD Card, format it to FAT32, place the LEOIMG.nbh on the card and put it in your phone. While holding down the volume down button, boot the phone and a white Loading... screen should appear and the flashing process should begin.
I`m afraid this won't work either, as the bootloader is supposed to show up in order for you to be able to flash anything, but it's better than doing nothing, so...
anrabi4 said:
You could try and flash a stock ROM via the SD Card, see if that works. There are some instructions here on XDA in the ROM Development section, check it out there.
Basically, once you have downloaded an official ROM from htc.com, extract it as if it were an archive and get the ruu_signed.nbh. Rename it to LEOIMG.nbh. Then take your SD Card, format it to FAT32, place the LEOIMG.nbh on the card and put it in your phone. While holding down the volume down button, boot the phone and a white Loading... screen should appear and the flashing process should begin.
I`m afraid this won't work either, as the bootloader is supposed to show up in order for you to be able to flash anything, but it's better than doing nothing, so...
Click to expand...
Click to collapse
Does not work, still hangs in htc bootscreen.
What I have to do now? =(
I hope you have any more suggestions for me.
I will read it within 20 min, because I have to go soon for 20 min.
I really need my phone fixed =(
Hi, if I remember correctly, you already said in the Artemis-thread, that the VOL DOWN button is broken. If this is the case, I fear there is not much you can do...
Have the same problem too.
I've installed a few roms with no worries, tried one about an hour ago that performs a Task 29 and i'm also now stuck at the white HTC screen...
it says the task29 was succesfull and then got stuck on the white HTC screen and the rom failed to load as the laptop did not detect a usb connection...
I've downloaded a stock rom and put it on the SD card named LEOIMG.nbh and tried pressing the vol down button, the Red,green,blue,white screen appears i can see
PB81100 HX-BC
SPL 2.08.Hspl 8g XE
0x05
CotullaHSPL 0x30
Then "serial" at the bottom or if i have the phone connected to the pc then "USB" appears.
If i hold both buttons and perform a Hard reset the phone asks to press Vol up button then says restored really quickly then freezes at the white HTC screen..
Any suggestions
Cheers
Actually got it sorted now, the rom had the Flashaholic utility built in which i haven't used before.
As we speak the rom is now installing phew (stop sweating now)...
Thought i had bricked it...
MaxKaul said:
Hi, if I remember correctly, you already said in the Artemis-thread, that the VOL DOWN button is broken. If this is the case, I fear there is not much you can do...
Click to expand...
Click to collapse
It's not broken, it just worked before I did the task29.
The phone is empty, and has no bootloader, and no ROM.
wakers said:
Have the same problem too.
I've installed a few roms with no worries, tried one about an hour ago that performs a Task 29 and i'm also now stuck at the white HTC screen...
it says the task29 was succesfull and then got stuck on the white HTC screen and the rom failed to load as the laptop did not detect a usb connection...
I've downloaded a stock rom and put it on the SD card named LEOIMG.nbh and tried pressing the vol down button, the Red,green,blue,white screen appears i can see
PB81100 HX-BC
SPL 2.08.Hspl 8g XE
0x05
CotullaHSPL 0x30
Then "serial" at the bottom or if i have the phone connected to the pc then "USB" appears.
If i hold both buttons and perform a Hard reset the phone asks to press Vol up button then says restored really quickly then freezes at the white HTC screen..
Any suggestions
Cheers
Click to expand...
Click to collapse
task29 DELETES the ROM. You NEED to install a ROM. A Radio-ROM should be installed automatically with task29. If this isn't the case, you need to install a Radio-ROM too. You can either install the HTC ROM or you can install a custom ROM like forum.xda-developers.com/showthread.php?t=612580
Suggestion: Enter bootloader -> connect USB -> install ROM with CustomRUU
MaxKaul said:
task29 DELETES the ROM. You NEED to install a ROM. A Radio-ROM should be installed automatically with task29. If this isn't the case, you need to install a Radio-ROM too. You can either install the HTC ROM or you can install a custom ROM like forum.xda-developers.com/showthread.php?t=612580
Suggestion: Enter bootloader -> connect USB -> install ROM with CustomRUU
Click to expand...
Click to collapse
Do I have to repeat it again? there is NO BOOTLOADER
joshoon said:
Do I have to repeat it again? there is NO BOOTLOADER
Click to expand...
Click to collapse
If you'd read the entire post, you'd notice, that I quoted the user "wakers", who seems to be able to enter bootloader.
MaxKaul said:
If you'd read the entire post, you'd notice, that I quoted the user "wakers", who seems to be able to enter bootloader.
Click to expand...
Click to collapse
Well im not able to.
I did a HSPL before then I putted a custom ROM Dutty's on the device.
After that I putten a Stock ROM on it again, and then I used Flashaholic, and after task29 it got stuck.
Well no bootloader means no HSPL which is good news for your warranty coverage..
Just go to HTC service and play dumb " uhm i was playing around websites with a flash game and uhm my phone uhm rebooted and is like stuck ever since in uhm HTC logo"
Now if the case for not being able to load the bootloader is a broken volumedown button, yeah ur pretty screwed, prepare to dive in ur wallet.
Were do you live? If you need help and there's one living nereby maybe we can help (p.e. a full battery) I live in the eastern part of the Netherlands (Overijssel) PM me if you can come.
On the Kaiser (my previous phone) I also had a problem I couldn't enter the bootloader anymore, but I can't remember why or what I did to recover it.
- If it was an allmost empty battery and recharged it?
- If I have used a special tool to connect?
I really can't remember.
If I read your story, I think you have loaded a corrupted NBH thru SDCard method, otherwise i think you cannot wipe your bootloader. Task29 only wipes the ROM area not the bootloader.
Have you tried to contact Bepe or Cotulla, cause i think they know everything about (H)SPL.
Otherwise you can start building a new house (you've got your first brick )
have you checked you battery connections, the middle one is notorious for getting bent out of shape at which point the battery will not charge and you can't flash you ROM.
chris2busy said:
Well no bootloader means no HSPL which is good news for your warranty coverage..
Just go to HTC service and play dumb " uhm i was playing around websites with a flash game and uhm my phone uhm rebooted and is like stuck ever since in uhm HTC logo"
Now if the case for not being able to load the bootloader is a broken volumedown button, yeah ur pretty screwed, prepare to dive in ur wallet.
Click to expand...
Click to collapse
I'm 100% sure it's not the volumebutton, and yes Im gonna play a bit dumb ofc, but I already have another story.
henk-jan said:
Were do you live? If you need help and there's one living nereby maybe we can help (p.e. a full battery) I live in the eastern part of the Netherlands (Overijssel) PM me if you can come.
Click to expand...
Click to collapse
It's costs a lot for a trip to there.
Btw, I tried a full battery too, didn't work. (I have two)
webpatrick said:
On the Kaiser (my previous phone) I also had a problem I couldn't enter the bootloader anymore, but I can't remember why or what I did to recover it.
- If it was an allmost empty battery and recharged it?
- If I have used a special tool to connect?
I really can't remember.
If I read your story, I think you have loaded a corrupted NBH thru SDCard method, otherwise i think you cannot wipe your bootloader. Task29 only wipes the ROM area not the bootloader.
Have you tried to contact Bepe or Cotulla, cause i think they know everything about (H)SPL.
Otherwise you can start building a new house (you've got your first brick )
Click to expand...
Click to collapse
I think it's bricked man, my bro is looking for the papers soon, and then im going to the KPN shop (the provider), because the phone has been ordered from there.
nrfitchett4 said:
have you checked you battery connections, the middle one is notorious for getting bent out of shape at which point the battery will not charge and you can't flash you ROM.
Click to expand...
Click to collapse
All the connections look fine.
Help. I can not access the bootloader on my HD2. I get the multicolor screen and then a grey screen with the word "Waiting...."
I have tried loading new rom from PC and SD, but only get to the grty screen. There is now USB when booting in to the bootloader.
If I reset it boots up normaly.
BigWilly11 said:
Help. I can not access the bootloader on my HD2. I get the multicolor screen and then a grey screen with the word "Waiting...."
I have tried loading new rom from PC and SD, but only get to the grty screen. There is now USB when booting in to the bootloader.
If I reset it boots up normaly.
Click to expand...
Click to collapse
nothing wrong with your boot loader
format card to fat32 and rename the IMG file to LEOIMG.NBH...
drop the file to the root of SD and enter bootloader, you should be able to flash rom without problem,
ensure you have HSPL before that,,,
mally2 said:
ensure you have HSPL before that,,,
Click to expand...
Click to collapse
I cannot HSPL either. If I run HSPL3_PKG.exe from PC the phone goes in to bootloader, "USB" is not appearing on the multicolor screen and it goes to the grey loading screen.
I have successfully flashed with a stock ROM (WWE-AFK_1.66.421.1) from PC using SSPL_RUU (copied RUU_signed to same folder as SSPL)
Then tried running HSPL3_PKG.exe - no go!
Any chance you could keep your problem on just one thread?
fred_up said:
Any chance you could keep your problem on just one thread?
Click to expand...
Click to collapse
Sorry. I just thought that the other thread's title is not very descriptive of my problem. “Help” could mean many things.
BigWilly11 said:
on the multicolor screen and it goes to the grey loading screen.
Click to expand...
Click to collapse
that symptom usually means you have a leoimg.nbh on your wrong size sd card. take the card out, does it still happen?
SORTED!!
Got a new 2Gb SD.
Formatted it FAT32
Copied stock HTC RUU_signed.nbh on the card (did no install it after all, but it was there just in case)
Inserted card in phone
Started the Bootloader (Reset and down volume).
It showed the multi colored screen with "Serial" on it
Connected USB cable and it changed to "USB"
Waited for PC to connect (installed a new driver on PC automatically).
Ran HSPL3_PKG.exe
The phone booted up ok
Shutdown
Inserted original 8Gb SD
Started up
Synced
Installed new ROM from PC
Busy installing apps (with XDA_UC)
Thanks all for your advice!
BigWilly11 said:
SORTED!!
Got a new 2Gb SD.
Formatted it FAT32
Copied stock HTC RUU_signed.nbh on the card (did no install it after all, but it was there just in case)
Inserted card in phone
Started the Bootloader (Reset and down volume).
It showed the multi colored screen with "Serial" on it
Connected USB cable and it changed to "USB"
Waited for PC to connect (installed a new driver on PC automatically).
Ran HSPL3_PKG.exe
The phone booted up ok
Shutdown
Inserted original 8Gb SD
Started up
Synced
Installed new ROM from PC
Busy installing apps (with XDA_UC)
Thanks all for your advice!
Click to expand...
Click to collapse
cheers for willy
BigWilly11 said:
Inserted original 8Gb SD
Click to expand...
Click to collapse
thats why you had problems in thefirst place. leoimg on 8gb card very often hangs at 'loading'
If you had mentioned teh sd card was 8gb in post one, you would have had your answer by post 2
samsamuel said:
thats why you had problems in thefirst place. leoimg on 8gb card very often hangs at 'loading'
If you had mentioned teh sd card was 8gb in post one, you would have had your answer by post 2
Click to expand...
Click to collapse
I have flashed the ROM MANY times from PC and SD, sometimes 4 times a day (testing all the options out there) and never had an issue. So the 8gb size never crossed my mind, but now I know and will never forget it!
Hi everyone
I think I killed my hd2 today ( I wanted to have a android, but first I needed HSPL2 and then MAGLDR. So I install HSPL2 this was succesfull but when I install a MAGLDR1.13 my phone should be black with flash..... but it gets white with this HTC logo and thats it, I can't turn it on or off, I can't connect to PC I can't do nothing!!!! can anybody help me. Is any chance?!
agnes12 said:
Hi everyone
I think I killed my hd2 today ( I wanted to have a android, but first I needed HSPL2 and then MAGLDR. So I install HSPL2 this was succesfull but when I install a MAGLDR1.13 my phone should be black with flash..... but it gets white with this HTC logo and thats it, I can't turn it on or off, I can't connect to PC I can't do nothing!!!! can anybody help me. Is any chance?!
Click to expand...
Click to collapse
First off what model of HD2 do you have, is it the Eroupean or T-Mobile US model? What version of HSPL did you install? You need to install HSPL 2.08 to install MAGLD cause MAGLD does not support any higher version of HSPL. If you have installed HSPL 2.08 then it might .e best to just revert your HD2 back to stock and started all over again. To revert back to stock download the latest official update for you HD2. You will have to go to your Carriers website and find the latest update if the update is not on your carriers website then go to HTC.com and look for it there. Once you have downloaded the correct update ROM for your HD2 you can either try to flash it via your computer with your HD2 connected via USB cable or flash it via your SD card. To use your computer while your HD2 is off hold down the volume down button and the power(end button) until you see the tri color screen, this is the bootloader mode. Wait until the serial in the bottom white bar changes to USB and then run the .exe or RUU to flash the ROM. If you can not get the USB to show in the white bar at the bottom for some reason look in the folder created from unzipping/exstracting the zip file that the update comes in and look for something like "RUU_signed.nbh" it might not read exactly like that but it will end in "nbh". Copy this to the root of your SD card and rename it exactly like this "LEOIMG.nbh", this is the only file name the bootloader will except. You may also need to use a micro SD card reader to copy this to your SD card. when you have the file coppied and renamed on your SD card while your HD2 is off hold the volume button and the power(end button) down until you see the bootloader and as soon as it says searching on the screen let go of the volume down button and the ROM should flash this might take a little longer than flashing via your computer so don't freak out if the screen stays black for a while or if the progress bar hangs occassionaly during the flashing. Also if this does not work visit the thread on flashing via SD card cause there is other variables to flashing via SD card like size, class and the way your SD card is formatted. Here is a link to the thread Also after you have flashed the official update ROM you will no longer have HSPL so you will have to reflash it befor trying to teflash MAGLD.
If he has 2.08, their is no need to do it all over again.
mattfmartin said:
If he has 2.08, their is no need to do it all over again.
Click to expand...
Click to collapse
Yesthey could try to reflash MAGLD by manualy putting the HD2 into bootloader. But from what thier post says.
I can't turn it on or off, I can't connect to PC I can't do nothing!!!!
Click to expand...
Click to collapse
So maybe reverting back to stock and starting all over again would be best.
Thank a lot! I try all of this but my phone stays with this colours and nothing is going on
I have a european model hd2 and the HSPL was 2
agnes12 said:
Thank a lot! I try all of this but my phone stays with this colours and nothing is going on
Click to expand...
Click to collapse
If your HD2 will still go to the bootloader than it should be savable. If you tried to flash via your SD card and nothing then either you did not release the volume down button fat enough when searching appeared on the phone screen. Or your SD card is either not compatible to use for flashing, it is not the right class of SD card to flash with, or your SD card is not formatted correctly. I suggest you go to the link I posted in my first post here and read through the thread it will tell you how to solve any of these problems and you can post there in that thread also some one there can probably give you more advice.
If you tried to flash via you computer and USB cable then you have to have it say USB in the bottom white bar of the bootloader, other wise it will not flash the ROM. Also you have to make sure you run the exe or RUU right to flash from your computer.
I hope you can get your HD2 working again. Oh yeah you never said what model HD2 you have.
Also what carrier are you with?
OMG I did it!! hehehe thanks again!! i connect phone via usb to my pc when I had this colours and then I instal again on phone ROM and it works!!!!!!!!!
ufffffffff
agnes12 said:
OMG I did it!! hehehe thanks again!! i connect phone via usb to my pc when I had this colours and then I instal again on phone ROM and it works!!!!!!!!!
ufffffffff
Click to expand...
Click to collapse
Glad to know you got it fixed. Just be carful and follow all instructions exactly if you want to install a NAND Andriod ROM. And make sure to select HSPL 2.08 when you reflash HSPL to your HD2.
I will be installing android ones again tonight, fingers crossed this time will be ok, but first I need to find a rom oldest then 3.14
Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!
calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??
ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%
do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse
demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
your phone turned off??? is your battery dead??
orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?
Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please
You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk