Database Users

Problems with the root!

Hi, my phone now is working and all ( the is it bricked post) Thanks guys
Here is the new problem...I would like to go to 2.2.1 ( the passimg.zip is 2.2) is there a way to update without unlocking bootloader.
I tried Androot and superoneclick....Androot gives me the Fugu message and SuperOneClick says its Rooted...but when I go to rom manager or other apps that need superuser...
I get this message : An error occured while attemting to run privileged commands!
So basically Root isn't working.
Also, when trying to install Cyan cm6...Rom manager reboots...but I get the Triangle with the exclamation point with the green man next to it...
Is it still possible to have my cake and eat it? ( locked phone, with root access so I can install modded roms)
Again...can someone help me with this
Thanks!

You didn't have to make a duplicate post. I already answered one of your questions in the other thread.

Dont make another post next time...
I rooted FRG83D with superoneclick root, But if its not working for ya you will have to unlock the bootloader via fastboot. Then push a custom recovery. With the recovery you can install the su binaries.

Manual root:
http://www.nexusoneforum.net/forum/...mple-sdk-setup-manual-root-guide-windows.html
Sent from my Nexus One using XDA App

Ok i'll only answer here now for this question:
I don't want to loose my warranty. Hence the softroot way.
I thought of something dunno if its possible:
is there a stock FRG83 image like the FRG33 I just installed....maybe 2.2.1 will be compatible with androot or superoneclick
Thanks

You need to do a few things before you go any further. There are key steps you are leaving out that are just a recipe for disaster. I'll detail them below, in the specific order you should follow them. There shall be no deviation from this list.
1 - Put your phone down. Seriously, stop messing with it. Just quit.
2 - Read the Wiki that you've been linked to, in both threads, several times.
2a - Now that you've read the Wiki, really read the Wiki. Yeah, you skimmed it the first time, I know you did.
2b - Now go read it again. I'm sure you'll notice something new this time.
2c - Now go read the links in the Wiki. Explore those threads.
2d - Those threads that the Wiki links to? They have links in them. Go read those.
3 - Rinse and repeat all steps from 2a to 2d for, oh, about 4 days. During this time you are allowed:
To post general chit chat on the forum. No technical stuff, no help threads, no questions. Just read. If you have questions, you need to read some more.
No more than 3 app installs per day, from the market. Thou shalt not download and install any APKs from any source that is not the Android Market.
To tweak settings on your phone, provided those settings are all done via the touchscreen on your phone. You shall forget the acronym "ADB".
Once you've done that, you'll root your phone in no time, and you won't be worried that you've bricked it. Then, and only then, can you start asking questions.
Why? Because all of your questions right now are answered. You're jumping the gun, and it's obvious you haven't done much research at all. Seriously, go read.
I hate to be mean, but if you want to understand stuff, you need to try and understand it on your own first. You're here looking for solutions (that are already spelled out) to problems that you created (because you didn't read anything). Quit looking for the easy way out. If you want to enjoy your phone and the features of what you're trying to accomplish...put some work in yourself, and stop expecting everyone else to fix everything and spell it out. People here are more than happy to help, but you gotta start helping yourself.

@Soberguy: Thumbs up to you. Couldn't have said it any better.

musashiken said:
@Soberguy: Thumbs up to you. Couldn't have said it any better.
Click to expand...
Click to collapse
Thanks, mate. Didn't mean to quote the guy above me, just noticed I did that. Fixed it.
I'm amazed at the patience some folks have. Maybe it was my rough 3 day weekend that's left me a bit short... Appreciate the thanks, all the same.

Ok, I do go a bit fast.
I'll read...it just that I tried the cm7 mod ( i know its experimental) and the phone
would'nt boot.
With the help of the great people on the board, I got my phone working again but on FRG33 (2.2)
My last question was if it was possible ( or someone knows of because Ive checked the net) to root without unlocking ( androot and superoneclick that i know of) if I have FRG33 ( Because Ive been getting permission errors)
Finally, I wanted to know if a FRG83 stock image was available so that I could recover to it without unlocking bootloader. (or any other stock that lets me root without unlock)
I'll unlock the phone as a last option...I'm sorry...And if anyone is pissed at my posts ...well sorry I just taught some of you experts could help.

pooky2010 said:
Ok, I do go a bit fast.
I'll unlock the phone as a last option...I'm sorry...And if anyone is pissed at my posts ...well sorry I just taught some of you experts could help.
Click to expand...
Click to collapse
See? Looking for the easy way out again.
It's not about anyone being pissed or short on patience. Look at how frustrated you are with the situation. You're frustrated. Why? Cause you did it wrong. Why? Cause you didn't read enough first. Even after several suggestions, you still want it done, with help, right now, or you'll sulk about someone pissed and how no one held your hand through it.
Is it possible to do what you want? Absolutely! Pretty easy, too. But if you read and help yourself, you'll better understand how to update in the future, as well as how to root the future update. Or, you'll learn how to root what you have, and flash a pre-rooted stock ROM (yes, those are here as well).
So call me an ass, cool. You did in your mind, that's fine. But really, I'm trying to let you know what will help you the most, and that's having a better understanding of how to prevent a boot loop in the future, or at least how to fix it if it happens. Best of luck, man.
Sent from my Sexy Nexy, courtesy of the fine developers of Tapatalk

Here's the deal.
I did a one click root without unlocking the bootloader. Then I installed rom manager and flashed clockwork recovery. Then I did a backup ( both done in rom manager) then I went back into rom manager and installed cyanogenmod 7 and my nexus is now haxored gingerbread. Make sure you do a full wipe before flashing new roms and it'll always work.
I didn't update my radio, my hboot or anything like that. And it all just works and is dead simple. I would suggest trying z4root or universal androot and then downloading rom manager from the market.
How you managed to **** up something so simple is pretty funny dude.
I'm using an at&t band n1 with an smiled. Not the one with super LCD. I heard a rumor that the super LCD n1s have problems with certain mods. You might want to figure out what type of screen you have too.
The cyanogenmod wiki at cyanogenmod.com might help you too.
Sent from my Nexus One using Tapatalk

OP, you have to learn the hard way. Stop using "newbie" as an excuse.
I was also a "newbie" when I first got my Nexus One in February. Everything about android was new and alien to me. It actually took me a couple of months of lurking in xda and reading up on tutorials before I took the plunge to rooting my phone. And I did not bother anyone on that. I made sure I understood the steps and triple checked every move I made in following instructions even though I did not understand them.
I also was worried about warranty and actually did the manual way of rooting my phone without unlocking the bootloader using some method that involved cutting a piece of plastic from my battery. That was nerve wrecking and no where as simple as the superoneclick thingy you have now. Yet I survived and I did it on my own.
I must admit that you have to be a little bit confident in using computers and have some basic knowledge of typing commands in cmd. But everyone has to start from somewhere.
Seriously if it's too much trouble or too complicated, maybe staying stock or going Iphone is a more comfortable alternative.

I'm actually pretty good with computers...
Also, I have bricked 4 phones (the provider took them back) fooling around...
I could brought this one back ( they didnt check). But I want to learn...I'm pretty impulsif...Anyway so far
With FRG33 z4root works (read thanks)
Now I trying to flash clockwork...( when I download cyan 6 +google apps) it reboots but I get the triangle thingy...I click power volume up ( read that thanks) I get a blue menu...I kinda scared to click an option so I rebooted...I'm trying to use rom manager for updates because its really simple ...anyway
Thats it for tonight All of you guys are nice dudes and I'll learn and will try to help im my own way...I know I'm a newbie that likes short cuts (hell I read all day at my day job...lol) This is fun ( playing with male toys)
Thanks guys!

[Q] Looking for a good safe Root and Stable ROM

I just bought a used Motorola Atrix for a great price and was looking at some of the ways to root the device and everything I have seen makes me very nervous to try anything at the moment.
I have rooted several Nexus One and Nexus S phones and never had any issues but I have been reading that the bootloader and firmware on the Atrix is nothing like any of the devices I have done in the past.
I would love to root and flash a nice custom stable ROM because after being spoiled using CM7, the stock ROM is not going to cut it. Anyone know of a good root method I could use without the fear of bricking this lovely device? Or should I just wait for a better stable process to come down the pike? Any help would be greatly appreciated.

bakron1 said:
I just bought a used Motorola Atrix for a great price and was looking at some of the ways to root the device and everything I have seen makes me very nervous to try anything at the moment.
I have rooted several Nexus One and Nexus S phones and never had any issues but I have been reading that the bootloader and firmware on the Atrix is nothing like any of the devices I have done in the past.
I would love to root and flash a nice custom stable ROM because after being spoiled using CM7, the stock ROM is not going to cut it. Anyone know of a good root method I could use without the fear of bricking this lovely device? Or should I just wait for a better stable process to come down the pike? Any help would be greatly appreciated.
Click to expand...
Click to collapse
So first your going to have to be on 1.26 to get a root. If you've already updated to 1.57 (the OTA update) then you need to flash back to 1.26. Instructions here: http://forum.xda-developers.com/showthread.php?t=991072
Then you can root, retain that root, update to 1.57 (OTA Update), and get your root back. Instructions here: http://forum.xda-developers.com/showthread.php?t=1016060
Then after you are done updating and getting your root back, you can install CWM (this is what the current roms are using to install), much better than adb. Instructions here: http://forum.xda-developers.com/showthread.php?t=1019143
Then you can either use GladAtrix Rom or Gingerblur (this is what I'm currently running). Both of these will deodex your system, theme your atrix, and give you the option to install various mods/hacks. Check the dev forum to see which one you think you would rather have.
Got all that???
I know it seems like a lot, but if you read and follow the directions, it's pretty fool proof, despite all the noob questions and problems to the contrary. If you have any questions or problems, just ask.

Swiftks...you should take you're reply and post it in general as a basic how to for the atrix...
Sent from my MB860 using Tapatalk

[Q] Atrix Downgrade Question

First off great forum, lots of good info on this site. I have been doing some searching today, but I have not found a clear answer to my question. I have an Atrix that came with Froyo, was immediately rooted, but later updated to Gingerbread through software updates. This obviously broke the root, but i have also begun to experience a lot of application crashes since the update. Nothing will stay open for more than 5 minutes without crashing. I would like to try to go back to an older OS, and i'm interested in trying the Alien ROM. What is the safest course to that destination. I have read that I need to flash back to stock before using the ROM, but i didn't find a definite answer on the safe way to do that. Can someone point me in the right direction? Thanks.

So you updated through the Ota? So your bootloader isn't unlocked
Sent from my MB860 using XDA Premium App

DO NOT DOWNGRADE! You will brick your phone.
You need to unlock your bootloader, install CWM recovery and then flash the Alien ROM to your phone.
Here's a thread with a great guide on everything
http://forum.xda-developers.com/showthread.php?t=1165791

Help Newbie with Nexus One

Hi All, I just got my Nexus one off ebay and it appears its not rooted as i do not see the padlock icon and i also cannot run the nexus torch.
What im looking to do is revert back to the stock software and than do all the OTA updates myself.
Can someone help me with this ? Im not looking to root though.
Im running the ATT version of the Nexus one.
Thanks all for your help.

To be root or not
if you do not see the padlock, then you are root!!

hi, yes i know and i do not see the pad lock so i have a unrooted phone. Im trying to find out how i can install the stock software this way i can do the OTA updates myself.
Thanks

If there's no padlock and you're sure it's not rooted... why do you think it's not already stock?

Well its running gingerbread and i wanted to go back to froyo and than OTA the updates myself

If its not rooted, root it! What version you on currently?
Sent from my GT-I9000 using Tapatalk

Im on the Nexus one ATT version, running the most recent gingerbread OS.

2.3.6???
Sent from my GT-I9000 using Tapatalk

If it is, try root using this... http://apachejava.blogspot.com/2011/06/root-nexus-one-gingerbread-234.html
My dad using my nexus one, so i dunno much... So, is your bootloader unlock, if it is, then go ahead with the link above... Then S-OFF using BlackRose...
Sent from my GT-I9000 using Tapatalk

Check this!!
Might help you.
http://answers.unity3d.com/questions/56512/downgrading-google-nexus-one-from-android-gingerbr.html

If you don't see the padlock it means the bootloader is still locked. If you don't have the SuperUser app then you are more than likely NOT rooted. Sounds like a stock phone if you ask me. Why do you want to roll back to Froyo then update? Sounds like you are already where you want to be. It sounds like a case of reaching around your ass to scratch your elbow. Heh. If you try to OTA update it and it says you are up to date, I would suggest leaving it alone or just root it! Good luck!
Sent from A VAN DOWN BY THE RIVER!

zinner526 said:
Well its running gingerbread and i wanted to go back to froyo and than OTA the updates myself
Click to expand...
Click to collapse
Why? Is there a problem with what is currently installed? If it's working fine, then I would expect downgrading to a previous version and applying the updates would just get you back to where you are now. I'm not criticizing, just trying to understand what you're looking to achieve
If you mean stock as in "original" that isn't Froyo either. The Nexus One originally came with Eclair (2.1). If you don't have root, I'm not sure if you can downgrade or how safe it would be. I've seen mixed results with downgrading. The only way to do a complete flash would be with an unlocked bootloader or root + custom recovery.
If you don't want to root or unlock the bootloader, why not just do a full wipe and use the version you have on it? You could also root it temporarily to restore to an unrooted Eclair or Froyo, then apply the updates.

Thanks Narbir, I'm going to try this. Does it matter I have AT&T ?

I hope So. I m usng Voda uk. Don't really brother me by that.

Well the phone reboots often for no reason so i thought if i started from the factory installed software and go forward it would help.
How hard is it to root to install enclar and than go forward ? Unless someone has another idea for the reboot issue ?

Install the latest stock ROM in PASSIMG format (complete ROM, all the partitions). No need to go back to Eclair or Froyo.
Prepare for the possibility of it not helping at all, and your phone HW being faulty. If you have ADB set up - you can run "adb bugreport" after the crash, and look for "ARM9 has crashed" line in the log dump that comes. If you'll see them - no amount of ROM switching will help.

Not to sound pedantic, but you seem a little confused (OP). Why don't you start by reading the FAQs regarding rooting and unlocking the bootloader, and understanding the ROM installation processes.
Couple of fundamentals to get you started:
1. The padlock (or absence of) is no indication of whether you are rooted or not. It merely indicates whether your 'bootloader' is unlocked or not, which is a completely separate concept from rooting.
2. Easiest method of seeing whether you are rooted is to see if you have the 'SuperUser' app in your app drawer.
If your objective is to install a stock/default ROM, search for a 'PASSIMG' for the latest available firmware for your device. Search these forums or Google it. The procedure is fairly straightforward and only involves putting the file on your SD card - and will restore your phone to a stock usable state.
If you're interested in custom ROMs, the fastest way to get started is to use SuperOneClick to root (Google, please). Then go to the market and download ROM Manager and just follow the instructions!

[Q] Rooting/unlocking bootloader

Hello, this is my first post here so bear with me...
I want to root my atrix and unlock the bootloader and (eventually) install CM9 onto it because I don't feel like waiting for the OTA to ICS, and I want to have the Vanilla ICS experience.
I know there are guides on how to root on here, but I wasn't sure if they pertain to the At&t Atrix MB860 with 2.3.6 and version 4.5.141, and I didn't want to try until anything before I was certain that it would work for my phone because like most people I am deathly scared of messing up my phone. My upgrade isn't until January, so this is the only phone I can use until then.
So can anyone help me out? What is the definitive step by step guide to rooting and unlocking the bootloader for my phone (at&t atrix, 2.3.6, 4.5.141)
Any help is greatly appreciated, many thanks!

Prashramani12 said:
Hello, this is my first post here so bear with me...
I want to root my atrix and unlock the bootloader and (eventually) install CM9 onto it because I don't feel like waiting for the OTA to ICS, and I want to have the Vanilla ICS experience.
I know there are guides on how to root on here, but I wasn't sure if they pertain to the At&t Atrix MB860 with 2.3.6 and version 4.5.141, and I didn't want to try until anything before I was certain that it would work for my phone because like most people I am deathly scared of messing up my phone. My upgrade isn't until January, so this is the only phone I can use until then.
So can anyone help me out? What is the definitive step by step guide to rooting and unlocking the bootloader for my phone (at&t atrix, 2.3.6, 4.5.141)
Any help is greatly appreciated, many thanks!
Click to expand...
Click to collapse
I just had to go through the process again recently. It's actually a lot easier than when I first got the phone. Goto this thread --->http://forum.xda-developers.com/showthread.php?t=1136261 and follow the unlock method first. Then flash custom recovery on the phone. You should be good to go after that. PM me if you have any questions.