Related
Hi guys.
I tried unlocking the CID with Lokiwiz0.2b but keep getting the error249 invalid vendor ID problem.
I updated my KJam with the latest iMate ROM thinking it had A2DP, but found it doesn't. I now want to flash the Qtek test WWE ROM which does. BUT after running Lokiwiz and selecting option C and then trying to update the ROM I keep getting the message.
I have tried unbundling Lokiwiz again in case it was a problem there, but no joy.
Any ideas anyone? or has it anything to do with the new ROM that maybe Lokiwiz can't address yet?
sangasanga said:
Hi guys.
I tried unlocking the CID with Lokiwiz0.2b but keep getting the error249 invalid vendor ID problem.
I updated my KJam with the latest iMate ROM thinking it had A2DP, but found it doesn't. I now want to flash the Qtek test WWE ROM which does. BUT after running Lokiwiz and selecting option C and then trying to update the ROM I keep getting the message.
I have tried unbundling Lokiwiz again in case it was a problem there, but no joy.
Any ideas anyone? or has it anything to do with the new ROM that maybe Lokiwiz can't address yet?
Click to expand...
Click to collapse
Your solution is to downgrade to the previous kjam rom, then cid unlock, then flash the Qtek rom.
Just run the K-JAM_WWE_1010903_106_10110_ship.exe upgrader to err downgrade. ;-)
summiter said:
sangasanga said:
Hi guys.
I tried unlocking the CID with Lokiwiz0.2b but keep getting the error249 invalid vendor ID problem.
I updated my KJam with the latest iMate ROM thinking it had A2DP, but found it doesn't. I now want to flash the Qtek test WWE ROM which does. BUT after running Lokiwiz and selecting option C and then trying to update the ROM I keep getting the message.
I have tried unbundling Lokiwiz again in case it was a problem there, but no joy.
Any ideas anyone? or has it anything to do with the new ROM that maybe Lokiwiz can't address yet?
Click to expand...
Click to collapse
Your solution is to downgrade to the previous kjam rom, then cid unlock, then flash the Qtek rom.
Just run the K-JAM_WWE_1010903_106_10110_ship.exe upgrader to err downgrade. ;-)
Click to expand...
Click to collapse
Tried doing that but I can't downgrade. The RUU says says I must get an up to date version. I recall when I loaded the new ROM it said I can't go backwards afterwards.
Does anyone know how can I do that?
don't know if this would work but have you tried bootloader mode?
unable to unlock CID for my Imate Kjam
Can any one help me to unlock CID for my Imate Kjam.
I am unable to install WM6.
Will appreciate the help.
what is your ipl-spl
chg1282002 said:
what is your ipl-spl
Click to expand...
Click to collapse
mine its 2.16.0001 , can anyone help me? iv already search and see many threads about this but with no result for me =\ i think first i have to unlock the CID then update the rom... but still no result =\
johnnybazukatone said:
mine its 2.16.0001 , can anyone help me? iv already search and see many threads about this but with no result for me =\ i think first i have to unlock the CID then update the rom... but still no result =\
Click to expand...
Click to collapse
Hi i see yours is G4.
the way i CID Unlocked my wizard to install WM6.5 is:
I Downloaded SoftSPL ( it Temp removes the lock )
--- http://forum.xda-developers.com/attachment.php?attachmentid=50344&d=1189619527 --
So after you downloaded that unZip it and inside there will be 2 CAB files.
move the CABs to your phone:
Cert_SPCS.cab )install on Phone 1st(
EnableRapi.cab )install on phone 2nd(
:
After you have installed them
Move The Rom you want to install into the SoftSPL Folder And Rename the ROM
nk.nbf
Then make sure the Phone is connected to Pc via Cradle/Cable
Then Just Run START-sSPL.exe (inside SoftSPL folder on pc)
tick and next on the screens that come up and then you mobile screen goes White (Dont Worry) then it will load rom you will have a bar on Desktop that loads to 100% .. just Let it finish then mobile reboots and you should be fully loaded with your copy of WM6
Hope This Helped
johnnybazukatone said:
mine its 2.16.0001 , can anyone help me? iv already search and see many threads about this but with no result for me =\ i think first i have to unlock the CID then update the rom... but still no result =\
Click to expand...
Click to collapse
Hi i see yours is G4.
the way i CID Unlocked my wizard to install WM6.5 is:
I Downloaded SoftSPL ( it Temp removes the lock )
--- http://forum.xda-developers.com/attachment.php?attachmentid=50344&d=1189619527 --
So after you downloaded that unZip it and inside there will be 2 CAB files.
move the CABs to your phone:
Cert_SPCS.cab )install on Phone 1st(
EnableRapi.cab )install on phone 2nd(
:
After you have installed them
Move The Rom you want to install into the SoftSPL Folder And Rename the ROM
nk.nbf
Then make sure the Phone is connected to Pc via Cradle/Cable
Then Just Run START-sSPL.exe (inside SoftSPL folder on pc)
tick and next on the screens that come up and then you mobile screen goes White (Dont Worry) then it will load rom you will have a bar on Desktop that loads to 100% .. just Let it finish then mobile reboots and you should be fully loaded with your copy of WM6
Hope This Helped
Hello All,
I have flashed my T-Mobile UK branded HD2 with an official HTC ROM using the GoldCard method and then to several Cooked ROMs using HSPL.
Does this mean my phone is now unbranded and I can flash other HTC Official ROMs without using the GoldCard method? i.e. how someone would flash an unbranded HD2 bought say from somewhere like mobilephonesdirect.
I'm aware my phone is still locked to the T-Mobile network which I'm fine with. My question is purely to do with removing T-Mobile's customizations.
I'm really asking because I want to be able to flash a valid HTC ROM to my device if the following happens:
I install HSPL
I flash my device to a cooked ROM
Something goes wrong
I can't get active sync to work/device won't boot into windows
I need to go back to official ROM for warranty
Cheers,
mac
If you use hspl no need for goldcard at all. you can flash anything from usb with hspl, official or cooked.
You dont need the phone to be booted to flash over usb. Boot to bootloader, connect usb, run the flash.
Thanks Sam,
I was under the impression you had to be connected via active sync to FLASH using HSPL (at least that's what the instructions say when using the tool).
But I still would like to be able restore my to a warranty friendly state.
Is my phone unbranded once I've flashed with the GoldCard or must I use the it every time I want to flash without HSPL?
Thanks,
mac
macgrewal said:
Thanks Sam,
I was under the impression you had to be connected via active sync to FLASH using HSPL (at least that's what the instructions say when using the tool).
Click to expand...
Click to collapse
Yea thats a common mistake caused by the way the guides, and various other answers in threads are written.
When you connect the phone in bootloader mode, so long as the word serial changes to usb you should be good to go.
But I still would like to be able restore my to a warranty friendly state.
Click to expand...
Click to collapse
Of course. You have two ways
1 (for both methods)- download the tmo original official rom, official roms thread, 1st post, 1st link, 1.43 folder.
then either
2 - extract the nbh file, copy it to sd card (no need for goldcard, stock 2gb card will be fine) rename leoimg.nbh then start phone in bootloader to flash.
OR
3 - STEP 1 - run the t mo stock you downloaded and flash over usb, which restores the rom to stock, and then STEP 2 - run HSPL2 again and choose the stock spl. (HSPL has 8 spl's listed when you run it, 4 stock and 4 hspl,) Choose 1.43.0000 and thats it, back to stock.
Is my phone unbranded once I've flashed with the GoldCard or must I use the it every time I want to flash without HSPL?
Click to expand...
Click to collapse
That doesnt really make sense. As soon as you flash any method, the phone is then unbranded. removing the tmo rom is unbranding.
What YOU mean is ''is the phone rom unlocked?' and the answer is no, it will always be rom locked to tmo, (different to sim lock) so if you want to flash without hspl then you will need the goldcard.
Cheers Sam,
That answers my question. HSPL it is.
Is there a way of removing the ROM Lock?
macgrewal said:
Is there a way of removing the ROM Lock?
Click to expand...
Click to collapse
only hspl. nothing permanent. (well, hspl IS permanent till you remove it, but you know what I mean)
Am i reading this correctly? You are saying that HSPL removes network sim lock?
I need to know whether i will be able to unlock my T Mobile UK HD2 on 1.42 SPL, after a HSPL flash and i have put another ROM on my phone.
Is there any way that flashing can remove the sim lock or prevent me from being able to unlock my phone?
no you miss read the post. rom lock is not sim lock.they're unconnected.
Can anyone answer this, so i can get on with it?
samsamuel said:
no you miss read the post. rom lock is not sim lock.they're unconnected.
Click to expand...
Click to collapse
Okay thanks,
sorry i missed your post.
Do i have to buy and unlock code or is there a way i can unlock for free?
thanks again
randommann said:
Okay thanks,
sorry i missed your post.
Do i have to buy and unlock code or is there a way i can unlock for free?
thanks again
Click to expand...
Click to collapse
your network will give you it, maybe, but they'll keep you waiting. lot if people successfully used pay sites and ebay. look around there are fitness of threads on the subject.
randommann said:
I need to know whether i will be able to unlock my T Mobile UK HD2 on 1.42 SPL, after a HSPL flash and i have put another ROM on my phone.
Is there any way that flashing can remove the sim lock or prevent me from being able to unlock my phone?
Click to expand...
Click to collapse
Off Topic, but, a word of advice (and to all who may read this).
I have noticed a few of your posts asking stuff that is readily available in the stickies at the head of each forum section.
Things like unlock and memory available etc.
If you really want to know these things then read all the stickies, then search and then ask if you are still in the dark.
Jumping in with questions that have been asked many times over is not a great way to get the attention of members.
Remeber the stickies are there for a reason.
Hi All,
I am new to windows Mob interface and read several threads on how to install cooked roms.
I have 1.48 ROM on my HTC HD2 Leo and need to upgrade it to 1.66.
Can someone please guide me through in how to go about it or post the link (if i have missed any) of any thread that has the tutorial?
Most of the threads talk about flashing a cooked rom but i simply want 1.48 migrated to 1.66?
Any pointers be appreciated.
the process is the same for cooked or official.
is there an upgrade for your phone? you failed to mention is it provider locked?
1 - instal hspl2
2 - run the 1.66 .exe
3 - done.
if you have a provider locked phone, and have the correct update, you can skip step 1, if you have a rom unlocked phone (not network unlocked) then get the htc wwe 1.66 .exe and also skip step 1.
read the stikies for how to do it,. but really all you do is run the progs, press ok when it says.
Hey thanks Sam.
My phone is not SIM LOCKED, tht implies i need not install any HSPL/HSPL2.
All I need to do is ,
1. Download the 1.66 ROM
2. Active Sync my phone
3. Run the exe downloaded.
4. Hard Reset my phone.
Please correct me if i am wrong anywhere!
oops675 said:
Hey thanks Sam.
My phone is not SIM LOCKED, tht implies i need not install any HSPL/HSPL2.
Click to expand...
Click to collapse
It ony implies it, it doesn't confirm it.
sim lock and rom lock are unconnected.
If you sim unlocked it yourself, by buying/getting a code, then the rom is still provider locked.
If the phone came sim unlocked, then it is a good bet it is rom unlocked too.
All I need to do is ,
1. Download the 1.66 ROM
2. Active Sync my phone
3. Run the exe downloaded.
4. Hard Reset my phone.
Please correct me if i am wrong anywhere!
Click to expand...
Click to collapse
yep, thats right. Because you are flashing over usb, it wont affect the SPL, but it will change the radio, so if you want a different radio, you will need to do that afterwards.
Thanks for the info.
My phone was unlocked when it came and was not any provider locked.
All i am looking for is a higher ROM version. Wann try HTC Leo with 1.66 ROM.
Bingo.....
I have upgraded it to 1.66. Thanks for your help
Mods can close this thread if required
Is it possible to unlock the device (MDA Compact III) if all I get is the bootscreen with IPL, SPL etc numbers? I tried soft and hard reset and all that stuff I could find here, but none of those helps... I would like to try to flash it, but haven't unlocked it yet so I'm afraid I would brick the device.
All that remains is the three-colored loader, which I can enter without problems.
Any help would be apreshiated...
[ntn]
ntn_labs said:
Is it possible to unlock the device (MDA Compact III) if all I get is the bootscreen with IPL, SPL etc numbers? I tried soft and hard reset and all that stuff I could find here, but none of those helps... I would like to try to flash it, but haven't unlocked it yet so I'm afraid I would brick the device.
All that remains is the three-colored loader, which I can enter without problems.
Any help would be apreshiated...
[ntn]
Click to expand...
Click to collapse
Hi!
You have to read CID with MTTY and find the proper ROM to flash it back to life or you need to make a Goldcard with another WM device and put it to your device and flash it with an official ROM.
BR
Scootie
So far I have seen posts only about getting the original ROM and flash my MDA with it. Well, since I haven't been able to get the original ROM for my device, I'm trying to cook my own ROM with the same parameters the original ROM should have. So far no success....
In case anyone has T-Mobile Sk original ROM and could share it... It would make me really happy
How to read CID with MTTY ?
Thanx !
Hmmm yeah, i am also trying to Unlock CID of my T Mobile MDA Compact-III and then i will flash it later with WM6 ROM. Being a total novice in this field, i am going through all the posts to figure out how to unlock CID.
And i also could not find original ROM of ma device. The links in the forum are of some tm-phonedownloads, but his site is offline for a long time i guess.
Any ways if u get any luck then pls post here as well.
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
CrazyTegger said:
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
Click to expand...
Click to collapse
http://dl.vmall.com/c0m2gktk1f
mcsc said:
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
Click to expand...
Click to collapse
I tried that one but it said invalid vendor id. I assumed that was because I had a Telus phone and not a Cingular one.
I should mention that I'm running 7.8 with bootloader 4.22.2250.0(129185) and firmware 2250.21.40200.661
ofIIns and
jimmy110 said:
link
Click to expand...
Click to collapse
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
yup I have it
CrazyTegger said:
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
Click to expand...
Click to collapse
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
rob243 said:
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
Click to expand...
Click to collapse
PM Sent.
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
jimmy110 said:
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
Click to expand...
Click to collapse
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
CrazyTegger said:
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
Click to expand...
Click to collapse
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
jimmy110 said:
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
Click to expand...
Click to collapse
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
CrazyTegger said:
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
Click to expand...
Click to collapse
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
jimmy110 said:
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
Click to expand...
Click to collapse
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
CrazyTegger said:
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
Click to expand...
Click to collapse
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
jimmy110 said:
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
Click to expand...
Click to collapse
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
CrazyTegger said:
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
Click to expand...
Click to collapse
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
jimmy110 said:
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
Click to expand...
Click to collapse
I'm really not finding anything useful here... I see a lot for Android, but nothing for an HTC Windows Phone. Are you referring to an IMEI unlock? ChevronWP7? Unbranding? Interop Unlock? WP7 Root Tools?
Thanks
I've now managed to developer unlock my Surround. What's the next step from here?