[Q] black screen after calls - HD2 Android Q&A, Help & Troubleshooting and Genera

hi there,
i am getting a black screen after i call someone or they call me.
it must be the light sensor because putting it next to a bright light fixes it and the screen returns
i am using:
MDJ FroYo HD v.4.3 android rom
chuckysdroidrom
radio: 2.50.15
does anyone know how to fix this problem?
thanks

that's what happens to me too. I think it's the proximity sensor too

any thoughts on a fix?

I just started testing Android on my HD2 and I got the same effect. Even if I press the physical key to turn the screen on, nothing happens. My current solution is to connect the USB cable to charge the battery. The key comes back to life all of a sudden.
Unfortunately, this isn't a viable solution when you're far from your home plug :-D

Duplicate of http://forum.xda-developers.com/showthread.php?t=835127

Related

[Q] Black Screen when starting a Phone Call, and finishing how to come back?

I've in my htc hd2 the Dutty FAM v6 HD2 rom, and I was trying an Android build (mjdejay Clean 2.2)...
It seems everything runs ok, but I've done a Phone Call, screen automatically got black (Off, like in WM 6.5), but when i finished the call, i cannot get screen on again... I've pressed all the buttons, but nothing appears to happen...
If i plug usb wire into HD2 it comes back, and if i do an incoming call, i can take it...
Nobody has got samething? Thnx!
UPDATE: I think that my HTC HD2 has its proximity sensor broken...
A number of members have the same issue. I do. But not always. No fix for the moment.
move the fone away from ur ear
also , get a better rom (even tho i have a mdj build myself)
souljaboy said:
move the fone away from ur ear
also , get a better rom (even tho i have a mdj build myself)
Click to expand...
Click to collapse
Gee at least you didn't say buy an android phone. To say take it away from your ear is redundant. And to try a better build is just as bad. Why did you even waste your time replying?
dabezt said:
I've in my htc hd2 the Dutty FAM v6 HD2 rom, and I was trying an Android build (mjdejay Clean 2.2)...
It seems everything runs ok, but I've done a Phone Call, screen automatically got black (Off, like in WM 6.5), but when i finished the call, i cannot get screen on again... I've pressed all the buttons, but nothing appears to happen...
If i plug usb wire into HD2 it comes back, and if i do an incoming call, i can take it...
Nobody has got samething? Thnx!
UPDATE: I think that my HTC HD2 has its proximity sensor broken...
Click to expand...
Click to collapse
this happened on my phone occasionally (though i haven't experienced it yet with mdj s4 kenel), anyways...
if the screen stayed black after moving the phone away from my ear, id cover the light sensor briefly with a thumb (or whatever!) BEFORE pressing the end call button, this always restored the screen. may work for you?
Hi. I have same problem. Now I have MDJ Froyo Sense 2.4. It is very frustrating all roms what i tested has this problem... Is any solution? I tried to disable automatic display brightnes but without success...
Just to make you feel you are in company I have this issue too. It is the single biggest pain in the ass about android and it isdriving me maaaad.
Still better than rocking WM though.
Same problem here, about 90% of the time. It's most annoying when you're on some automated service that asks you to press a number and you can't get your screen on to bring up the dialpad!
Rest assured though, pressing the end call button does indeed end the call. Just leave the phone alone for a minute or so afterwards and it appears to back to "normal".
Finally i have found a workaround
Hello, after many tests i have found good workaround. It is very simple. Download from Market: "Speaker Shake" (there is avaible a free version) and install it. Then set it like on my screenshot. (important setting is "Speaker Always ON"). Now when you start a call, this app automaticly turn on speaker - this event wake up your phone and then is end of your "black screen". After this you can again switch off speaker in time of call...
Sorry for my bad english. I hope that it will help to you..
I use MDJ FroYo Sense Clean v. 2.4 [kernel: MDJ S6.1]
Thanks. I will give Speaker Shake a try.
Just a little happier right now as others have this issue and that it is just not an issue with my phone.
I am sure it is just an incompatible driver somewhere. Never noticed it in prior builds but with new builds it happens. But not always. But I did notice if I am able to select speaker then turn speaker off the issue doesn't happen. But then the screen does not go black when I put it to my ear.
To me this is a much bigger issue than data freezes. Makes using my phone as a phone almost unbearable.
Hoping someone who knows how will look into this issue soon.
Tried Speaker Shake.
Calls are automatically with speaker on and screen stays awake. However after turning speaker off the screen goes black and won't turn on again.
Nice fix if using speaker ALWAYS but still doesn't help for normal calls.
I tried it many times and this issue "after turning speaker off the screen goes black and won't turn on again" i had only once.
I have changed this app and now it turns speaker back to normal. You can try it. For my is it now best solution how to avoid black screen....
And i forgot to say that you need to have switched off automatic brightness of display..
Has anyone tried covering the light sensors for a few secs?
Not the best solution but it always works for me, can live with that till it gets sorted.
kam333 said:
Has anyone tried covering the light sensors for a few secs?
Not the best solution but it always works for me, can live with that till it gets sorted.
Click to expand...
Click to collapse
It doesn't work for me...
Hello. I have a problem with unlocking the phone. When I lock the phone and try it again to unlock the screen lights up only in black. Sometimes it takes a second, sometimes longer. You have the same problem? Any fix?
Thanks petapen. I will try your modified application.
Still wondering what the issue is here. Newer kernal issue? I believe I am still running hastarin 8.3.
Edit: And for other poster.......covering light sensor or exposing it to bright light does nothing once it turns black.
If anyone have any another solution. Please let me know....
black screen
petapen said:
If anyone have any another solution. Please let me know....
Click to expand...
Click to collapse
Screebl.....
If you haven't disabled auto brightness, do that. Secondly, some roms require a person to press the "call" key to wake the phone up.
Lastly, try a different rom, just remember to shut off auto brightness. I wish they came with that defaulted to off anyway.
Bumping this thread to keep it alive. Had a 50% chance of keeping the screen on, in froyostone v3.1. But it always came back after hitting end call key.
With MDJ FroYo HD v.4.3 the screen goes black everytime. Even after call the screen does not come back on. Only work around is to have someone call my phone and reject the call with the call end key. Then the screen turns back on.

Proximity sensor problem on diferent Android builds

After I make a call the screen goes black for few minutes and the phone does not responding at any keys.
I have WM 6.5 3.14.479.2 the official build and I try a lot of Android build but I have the same problem. When I start a call the screen goes black and no answer from any key minutes after the call is ended. After 3 to 10 minutes the keys working and the screen is on again ...
Where is the problem ? Proximity sensor ? No such problem on WM only on Android.
try holding it up to the light see if it comes back on, latest kernal dont have this problem i think!
I am not sure if everyone has this problem
I have also noticed the same problem. Even worst it is in Desire HD builds, screen stays off all the time and removing battery is necessary to restart the phone.
But it is only when the call was finished on my side by pressing HW button. Software button is of course not visible because screen is off.
The only workaround for me is wait till call is finished on the other side of the line, then the screen turns on again itself
I as just going to post exactly the same thing,especially on HD versions. Going off those at the moment,as I've now bent my battery contact pins.
I thought it was something I was doing wrong.
Going onto my 5th diff rom this week,, cant help but try them all as they are so good and different in their own ways.
Thanks
It is not posbile to disable proximity sensor so the screen remain on when I start a call ?
Agree with you the problem is more annoying with HD builds.

[Q] End call screen freeze - solution?

I keep having this problem with almost every build I try in my TMO HD2. When holding the phone, as soon as I make a call, the screen goes black. When I end the call using the hardware button, the keypad lights come on and the screen is non responsive until I plug in the charger. Solution?
I too have this problem but not that bad.After ending the call the screen stays black for 3-4 seconds, but it is still irritating.
Well mine stays black until I insert the charger which renders any of the builds with the issue completley unusable.
this is already known problem, especialy with DesireHD build it gets worst. there is no solution yet, as I understood, but several workarounds, for example discussed in this thread
http://forum.xda-developers.com/showthread.php?t=835127
I always say it but maybe trying a different build would work?
brinks said:
Well mine stays black until I insert the charger which renders any of the builds with the issue completley unusable.
Click to expand...
Click to collapse
Do you have BsB Tweaks installed? If so, this problem is caused by having the "Tap Time" tweak set to "on". I was having this issue and read about the fix somewhere (might have been here). I set "Tap Time" to "off" and.... immediate and permanent (so far, about a week) fix.
regards
noshad
brinks said:
I keep having this problem with almost every build I try in my TMO HD2. When holding the phone, as soon as I make a call, the screen goes black. When I end the call using the hardware button, the keypad lights come on and the screen is non responsive until I plug in the charger. Solution?
Click to expand...
Click to collapse
Do you have BsB Tweaks installed? If so, this problem is caused by having the "Tap Time" tweak set to "on". I was having this issue and read about the fix somewhere (might have been here). I set "Tap Time" to "off" and.... immediate and permanent (so far, about a week) fix.
regards
noshad
EndCall - black screen freez
same problem here... please help me !
i had installed on my hd2 DL.Desire.v4.31.44.12 and it's worked fine for a wile but now i tryed the last version of dl desire and a gingerbread build but the problem didn't disapear. I reinstalled radio that is version 2.15.50.14 but .. nothing seams to work
I need your help guys !
Sorry for my bad english.
I was curious to see if in wmo it is the same problem, but no... in wmo works fine.
it's strange that at first fresh install of dl.desire everything was ok, but now it isn't. I've reinstalled magldr but with the same results.
It doesen't work.
I think it is something with the proximity sensor, because when i turn on the speaker and the screen is on i can end the call with no problem and no freeze.
the only solution i have for now to unfreeze the screen is to plug in the charger cable in the device.
Problem Solved
I just cleaned the proximity sensor and it's working great. No freeze no black screen.
I have the same problem.
http://forum.xda-developers.com/showthread.php?t=1012396
If you have the original screen protector with the 2 holes from htc, try to clean the sensors with a soft microfiber.
I didn't had this problem untill i replaced my screen protector with the htc screen protector. (the 2 little holes are exposed to dust and dirt, and when you remove the phone from your ear the sensor doesn't respond because of dirt. I think in android the voltage for sensors is a little bit lower than wmo, and that makes the sensor less responsive)
Sorry for my english.
install from android market ADW launcher....make it default home screen...try this one too..
Solution
Everything difficult-is easier)
Just clean dust on the sreen,where sensor is situated.

Screen turns off during calls,,,

I am having trouble with my screen turning off when making a call,it happens both in win-mo and also when using Android.
I am using 13th Dec NRG rom and the latest HD2ONE android rom.
As soon as I dial number and pess call the screen goes black and the only button to work then is the end call button,in android it will take a battery out reset or abouit half hour left alone before i can use the phone.
I have done a search but the only thread that comes up is the same prob as mine dating back to June with no deffinite answer.
Does anyone else have this problem,its strange how it happens both in Win-mo and Android I'm at my witts end as to try and solve it,it happens no matter what rom combination I use.
Thanks
Well the HD2 has a sensor near the top so that the screen will turn off when you bring it up to your face, and turn back on when you bring it down again. Perhaps your sensor is broken? Can you send it in for warrenty?
Thats the problem,it does the same even if I am holding it away from my face at arms length,I have disabled auto-brightness too,makes no difference.I have now seen many threads on this subject with lots having the same problem but it still seems there is no deff answer.
If it's in both WinMo and Android it's almost definitely a hardware issue. Maybe there's some dirt in front of your proximity sensor, try cleaning it. If not, return for warranty.
Not trying to sound like a troll here but is the sensor clean? I've had a similar issue before but after cleaning the corner of my screen(skin oils get all over it), it worked fine again.
Another thing to think about is this: Does the WinMo ROM you're using have Co0kie's Home Tab Mod V2.0? If it does, Is the proximity sensor option turned on? If it is then any time anything gets close to the corner of the screen, even a finger, the screen will turn back off.
Sometimes partial data's like this are carried over into Android when you boot.
Check to see if you have CHT and if you do, check to see if that option is enabled. If it is, disable it, clean your screen and see if this helps.

no screen backlight

Hi, i know it's an old issues and few solutions are posted out there, but none worked for me.
symptoms: phone turns on with sound, vibration and top led, menu and back buttons all lit, but screen black, it even responds to touch from the sound it gives.
although, i noticed a way to bring the screen alive for sure is to plug usb cable to to charger then turn it on and screen comes alive.
i don't think it's hardware problem, or flex cable disconnected, because when it turns on it works flawlessly, and as many know dismantling the s5 to check is a real pain.
and if it's a software glitch, is the MM update that's coming out will fix it?
anyone with real knowledge of this issue and ow to fix it, please help!!!
flash stock using odin maybe? idk

Categories

Resources