Database Users

Going Back to My Stock Eclair

Dear All
before i restore my last eclair stock rom by red cwm, what should i do??
right now i using 2.4 voodoo with enable lagfix.
Do i have to :
1. go to cwm, disable lagfix
2. wipe all
3. restore eclair backup
4. reboot, flash by odin di01modem.tar
5. that's it
is it work to get me back my eclair stock rom??
or i just follow this Link
Odin Restore files to get you to stock
or
[ODIN] Full DI01 ODIN Package
Thx

Odin for full di01 will do the trick, no need for anything else.
Sent from my SCH-I500 using XDA App

To add to this post, disable voodoo and restart phone to let it disable add
Gurm said:
Odin for full di01 will do the trick, no need for anything else.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Rocking dj05 and jt's voodoo 5

It is my understanding that if you run the complete odin package it will overwrite even voodoo.
Sent from my SCH-I500 using XDA App

i have killed my phone 3 times not disabling voodoo correctly when flashing roms. and each and every time adrynalyne's full di01 restore package has overwritten the whole thing for the win.
so if you are going back to bone stock, unrooted, full bloated eclair, (ie because you need to bring the phone back to verizon for warranty work) then that is your best bet. it will indeed wipe any and all voodoo whatnot from your phone.

Isn't it fine just to bring it back to stock DL09 Eclair, since that's the latest official OTA release? I don't see why you need to go back all the way to DI01 if you're planning on returning it. But I guess in the end of the day it won't really matter either way.

It doesn't really matter, all of the all in one vzw fascinate odins will work.
You technically don't _need_ to odin anything but the modem though.
For me, there was no lagfix and I had a working cwr/rom manager, so I did it in three quick steps.
1. Nandroid restore my DL09 setup.
2. Odin DL09 modem over EB01.
3. install a DL09 kernel from clockwork recovery and wipe the cache.
I was exactly where I was before with no headache.
Nandroid doesn't flash modem nor kernel.
However the all in ones may be faster if you are building from scratch (and absolutely the fastest route to stock). You should pick an all in one with the modem and kernel you want or you will have to do steps 2 & 3 either way.
Swyped w/ XDA App. A clean tie attracts the soup of the day.

trully guys, do you happy with leak froyo right now??
for me battery issue thats why I have to go back to eclair.
fascinate with eclair has the speed,powerfull n stable, its the same like I feel when use leak froyo.
there were no freeze or stuck either on both OS.
Sent from my SCH-I500 using XDA App

capunkjd said:
trully guys, do you happy with leak froyo right now??
Click to expand...
Click to collapse
I am happy, its Freakin' FROYO
for me battery issue thats why I have to go back to eclair.
Click to expand...
Click to collapse
For me, Froyo has been MUCH better with my battery. Have you wiped your Battery Stats?
fascinate with eclair has the speed,powerfull n stable, its the same like I feel when use leak froyo there were no freeze or stuck either on both OS.
Click to expand...
Click to collapse
I agree, but Froyo does make is a little more faster but with leaked ROMs they aren't fully tested, so that's why they are a little buggy, and thats why we have great devs here that fix em as soon as we find em
Sent from my SCH-I500 using XDA App[/QUOTE]

capunkjd said:
trully guys, do you happy with leak froyo right now??
Click to expand...
Click to collapse
I found that turning of gps when not in use(I never use it) stopped the battery drain.

I also want to go back to eclair and cant find it anywhere. I have my phone on metro and I cant get my web and mms to work, also my phone shows only 1.47 g internal memory. I bought this phone used so who knows what was dont to it. Anyone have an idea where to get eclair???
Edit- Installed this via odin as instructed. worked great took me back to 2.1 update 1 which is what i had when i got the phone. Will continue to work on the mms and web issue. Oh and still have the memory issue

pinkmini said:
I also want to go back to eclair and cant find it anywhere. I have my phone on metro and I cant get my web and mms to work, also my phone shows only 1.47 g internal memory. I bought this phone used so who knows what was dont to it. Anyone have an idea where to get eclair???
Click to expand...
Click to collapse
http://forum.androidcentral.com/verizon-fascinate-rooting-roms-hacks/53549-how-flash-full-package-dl09-stock-di01-via-odin.html

Cant restore eclair
Guys i have a bit strange problem. I'm trying to restore stock Eclair on my x8 but for some unknown reason i cant do it. Tried flashing it, tried with SEUS and no result plus it wont go into recovery wso i cant access root menu im running out of ideas help pls. Btw im running GingerDX v 0.26.
I got it to work. Sorry for disturbing guys. Thanks.

[Q]

I know you have to .sbf to go to get ginger bread
i had Liberty running on my phone
and decided i wanted blur so went and flashed
one of squidlies rom
and the rom says
System Version
2.3.20.A995.Verizon.en.US
Android Version
2.2
and i did it with out .sbfing
everything is normal and working
is that normal?
and couldnt i just flash
GB with this rom???
TIA

That would be blur version 2.3.whatever, the android version of that is froyo (2.2), gingerbread is 2.3...so you are still on froyo.
Sent from my DROID2 using XDA Premium App

JeezyMT3G said:
I know you have to .sbf to go to get ginger bread
i had Liberty running on my phone
and decided i wanted blur so went and flashed
one of squidlies rom
and the rom says
System Version
2.3.20.A995.Verizon.en.US
Android Version
2.2
and i did it with out .sbfing
everything is normal and working
is that normal?
and couldnt i just flash
GB with this rom???
TIA
Click to expand...
Click to collapse
Yes thats normal. You don't really have to sbf as long as you wipe data and cache when changing ROMs.
Yes you can flash GB from where you are. As long as you are on a 2.3.20 ROM (which you are) your able to flash it without sbfing. Just be sure to wipe data and cache just in case.

orkillakilla said:
Yes thats normal. You don't really have to sbf as long as you wipe data and cache when changing ROMs.
Yes you can flash GB from where you are. As long as you are on a 2.3.20 ROM (which you are) your able to flash it without sbfing. Just be sure to wipe data and cache just in case.
Click to expand...
Click to collapse
Thank you!!
Sent from my DROID2 using XDA Premium App

Ok I flashed everything is working amazing!!
Only thing is since I was on the cricket network I lost my apn settings
But a quick activation by dialing *22804 (for cricket ) got it back up
So I have talk n txt but no data ..
But its all good I can go to retailer and fix it
Sent from my DROID2 using XDA Premium App

PRL and DATA profile updates

How would I do a prl or data profile update on my evo when it has cyanogen mod 7 RC 4 on it?
Sent from my PC36100 using XDA Premium App

U can't do it on aosp u have to nandroid, flash to sense, update it then nandroid back

SlickJamesBtch said:
How would I do a prl or data profile update on my evo when it has cyanogen mod 7 RC 4 on it?
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
do a nand back up first, then flash a sense rom and update prl, then restore you nand backup...

THEGAMEPLAY94 said:
U can't do it on aosp u have to nandroid, flash to sense, update it then nandroid back
Click to expand...
Click to collapse
what he said...lol

Ok thank you. That's what I've been doing I didn't know if there was another way.
Sent from my PC36100 using XDA Premium App

i'm running myn's with one of netarchy's kernels and i'm having trouble with it, too. i have a feeling you might even need to reflash to a stock kernel, upgrade, then flash back to whatever you use daily.

it would be pretty sweet if some one made flashable ZIP's to download through ROM Manager *clockwork*that would update these kind of things!

roflboxer said:
i'm running myn's with one of netarchy's kernels and i'm having trouble with it, too. i have a feeling you might even need to reflash to a stock kernel, upgrade, then flash back to whatever you use daily.
Click to expand...
Click to collapse
Flashing something like Mikfroyo also flashes a stock kernel as well.

slicksyco00 said:
it would be pretty sweet if some one made flashable ZIP's to download through ROM Manager *clockwork*that would update these kind of things!
Click to expand...
Click to collapse
update profile just sets up your phone to authenicate with the EVDO channels. Once it is done you do not need to do it again unless you wipe out your data settings some how.
Prls are stored in a different location then what a flashable zip could touch from what I understand.

Yeah i think your right, I was assuming*mistake* that it was similiar to flashing updated radios... curious as to know why though*just wondering for personal knowledge

If u flash eng-pc36img, it will put your prl back to 60662. If we could put newest prl in that....rcdata I think

Anyone else have a 01115 prl?
Strange to me.

Yes. Its the newest.

rockky said:
Anyone else have a 01115 prl?
Strange to me.
Click to expand...
Click to collapse
Yeah I have it after reading about it last night, i'm in cincy,oh
Sent from my SPH-P100 using XDA App

Gbread 595 Anyone?

Morning all,
Is anyone running the Gbread 595 leak yet? I am thinking about trying it out this morning, as everything I read indicates it will be the launching point for what could be the official 596 release on the 13th.
Let me know if you have any observations on this.
Thanks,
Steve

I downloaded it yesterday, and am running liberty v.5 on top of it and I love it. It is really fast, and other than a few bugs with my contacts syncing up with facebook, I am having no problems.

Im gonna wait it out, till we get the official release... Apex2.0.0 is pretty sweet for now
Sent from my DROIDX using XDA App

owenbeals said:
Im gonna wait it out, till we get the official release... Apex2.0.0 is pretty sweet for now
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I agree. Apex is amazing. I will wait for it to update

Weird issue I am running into....
I upgraded to 588 with no problems from 340 Froyo. I used DroidX recovery to accomplish this. When I rebooted 588 I tried to go to 595. I tried using DroidX recovery but this did not allow me to boot into recovery...it only gave me a blank screen. When I got back to 588 I uninstalled DroidX recovery and then installed Droid2 recovery. I was then able to reboot into recovery and try to install 595. The install aborted saying it was looking for 3 arguments and got 4.
Any ideas? Which recovery should I be using thoughtout this?
Thanks,
Steve

Both recoveries (AFAIK) are the same clockwork recovery, it's just a different method of "bootstrapping" so that you can get into the recovery. Droid2 bootstrap works on gbread unless USB debugging is disabled, then droidx bootstrap works.
Sounds like you got a bad file.

Just redownload the file and it should work

Yes the one I downloaded yesterday was bad, and a new one was uploaded. I just downloaded the new one and am going to try again to move back up to 595. Once that happens I am hanging on til the 13th.
I would assume once this official update comes out then VZW will no longer support the DX with official updates. We really need to get Moto to unlock the bootloader for us, so we can continue to develop for the DX.
Steve

I have made it successfully to 595. I am having a problem with Gingerbreak 1.2, so I am betting there is something in 595 that doesnt allow it to root.

stevefxp said:
I have made it successfully to 595. I am having a problem with Gingerbreak 1.2, so I am betting there is something in 595 that doesnt allow it to root.
Click to expand...
Click to collapse
P3Droid released three different versions of .595: full stock, rooted and odexed, and rooted and deodexed.
You can try flashing one of the rooted .595 releases.
Sent from my DROIDX using XDA App

Yes it looks like the rooted ones will accept Gingerbreak. I may go back to .591 and hold there until the official OTA version comes out.

You shouldn't need Gingerbreak on the rooted ones, as they are already rooted.

stevefxp said:
Yes it looks like the rooted ones will accept Gingerbreak. I may go back to .591 and hold there until the official OTA version comes out.
Click to expand...
Click to collapse
If you are going to flash a rooted version what do you need gingerbreak for?

smiteme said:
I downloaded it yesterday, and am running liberty v.5 on top of it and I love it. It is really fast, and other than a few bugs with my contacts syncing up with facebook, I am having no problems.
Click to expand...
Click to collapse
So you're not running it at all then... lol. You downgraded it back to .591 when you installed Liberty.
Sent from my DROIDX using Tapatalk

Curious, I'm running .573 now, if I flashed the latest rooted & deoxed, do I really have to sbf back to Froyo before hand like I've read in other places? OR can I just flash over it and roll on?

You only need to flash back if you don't have root, I believe.
Sent from my DROIDX using XDA App

Not having luck.
I tried to install, initially from my rooted deoxed stock .340 to rooted deoxed .595, first got a corrupted file report....would not upgrade.
Next got boot loop (repeating M), so SBF back to stock 340...Rooted and tried again with the same file and got a very unstable phone, reboots etc.
The only thing I can think of is that the phone was stock rooted but not deoxed, so when I tried loading the deoxed version it didn't like it? no idea.
I did a wipe before each load but can't seem to get it to work on my phone. My phone is very new.
SBF'd back to stock unrooted and I'll leave it like that to see if I can get the update from VZW.

I believe you have to start at .588 (or .573) then flash .591 over it, then flash .595 over it.
Sent from my DROIDX using XDA App

I'm on 2.2 and waiting. Just not convinced about 595 and getting the update. How do we know its going to be 596.
Sent from my DROIDX using XDA App

infazzdar said:
I believe you have to start at .588 (or .573) then flash .591 over it, then flash .595 over it.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Not completely accurate.. I went from .588, to .595 without any adverse effects. Phone is a bit snappier than before too, app drawer scrolls more fluidly, etc.

New fascinate owner

So I'm now own a fascinate after owning a Droid 1, epic, ascend 2, Droid x, and now this... I was wondering if anyone could help me with finding cm7, which recovery, how to properly install it. I so far have the Samsung drivers and Odin 3 but my first attempt cm7 it worked fine minus no 3g and gapps wouldn't flash/install, so than I tried going back to stock and it bricked on me " thanks to mobilecomm man" I now have my phone back but I think I'm running 2.1 is their anything newer like 2.3 ? It would be great if someone could help me out
Sent from my galaxy s fascinate using xda premium

Get cm7 rom from here:
http://forum.xda-developers.com/showthread.php?t=1190668
use this guide to install it:
http://forum.xda-developers.com/showthread.php?t=1212239

So I did it fallowed what was posted and it worked but I had no 3g so when I tried to go back to stock I bricked my fascinate, I found a Odin3 back to stock I think its a DL09 2.1 something like that ant
Yhow it works fine but is their any stock or stock rooted 2.3 anything to fringe my device up to date
Sent from my SCH-I500 using xda premium

Did you repartition when you were installing cm7?

FDro said:
Did you repartition when you were installing cm7?
Click to expand...
Click to collapse
He should have... the guide I posted in the 2nd link clearly states to repartition. Usually if you add the pit file, repartition auto checks itself anyways.
---------- Post added at 10:41 AM ---------- Previous post was at 10:38 AM ----------
qblk said:
So I did it fallowed what was posted and it worked but I had no 3g so when I tried to go back to stock I bricked my fascinate, I found a Odin3 back to stock I think its a DL09 2.1 something like that ant
Yhow it works fine but is their any stock or stock rooted 2.3 anything to fringe my device up to date
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
There is no official 2.3 update yet... but there is a powerwashed gingerbread rom in dev section thats a official mezmerize build. Its basically a stock gb rom thats rooted/debloated/ bing free/ deodexed.
http://forum.xda-developers.com/showthread.php?t=1242747
you need to odin this just like a stock package. use the going back to stock section of this guide below. Just replace the file in step 1 with powerwashed gb.
http://forum.xda-developers.com/showthread.php?t=1238070

I agree PW GB is very good except when I try to play 3d games (Guerrilla Bob) the touch screen freezes and does not allow any movement.

I currently have a rooted vibrant my buddy has a fascinate it has been ota updated to 2.2.1 is there a root method or do I need to Odin his phone back to eclair? Thanks in advance hope I'm posting in the right area. I've got cm7 #85 and the new Neo 17 would like to find something similar for his fascinate.
Sent from my SGH-T959 using XDA Premium App

Rayn1328 said:
I currently have a rooted vibrant my buddy has a fascinate it has been ota updated to 2.2.1 is there a root method or do I need to Odin his phone back to eclair? Thanks in advance hope I'm posting in the right area. I've got cm7 #85 and the new Neo 17 would like to find something similar for his fascinate.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
Just use the guide I posted in the 2nd link. It will put his phone on powerwashed ed05 2.2.2 froyo. It's basically a stock rom thats already rooted, debinged, debloated, otb fusion 1.6 voodoo kernal...etc. No point in just rooting anymore with these enhanced stock roms that ccompos put together for us.

Thanks will do
Sent from my SGH-T959 using XDA Premium App

[/COLOR]
There is no official 2.3 update yet... but there is a powerwashed gingerbread rom in dev section thats a official mezmerize build. Its basically a stock gb rom thats rooted/debloated/ bing free/ deodexed.
http://forum.xda-developers.com/showthread.php?t=1242747
you need to odin this just like a stock package. use the going back to stock section of this guide below. Just replace the file in step 1 with powerwashed gb.
http://forum.xda-developers.com/showthread.php?t=1238070[/QUOTE]
I did this on my Fascinate. I went from Super Clean 2.8 back to stock, OTA updated to Verizon 2.2 and then Odin'd Powerwash Gingerbread 2.0 beta 3. No complaints here, PWGB is great!

Ok well now my phone. Keeps saying E: cant mount/ cache/recovery/command
Logs
System
Data data
And so on......
This sucks i did the back to stock odin file dl09 file but its not working.... im just tryimg to get to an updated rom can someone point me in the right direction
Sent from my Wifes M865 using XDA Premium App

qblk said:
Ok well now my phone. Keeps saying E: cant mount/ cache/recovery/command
Logs
System
Data data
And so on......
This sucks i did the back to stock odin file dl09 file but its not working.... im just tryimg to get to an updated rom can someone point me in the right direction
Sent from my Wifes M865 using XDA Premium App
Click to expand...
Click to collapse
Odin eb01 with the atlas 2.2pit file and repartition checked then boot the phone fully...that will get you a working phone although eb01 is not an official release follow the directions in this link
http://forum.xda-developers.com/showthread.php?t=1124391
Sent from my SCH-I500 using XDA App

qblk said:
Ok well now my phone. Keeps saying E: cant mount/ cache/recovery/command
Logs
System
Data data
And so on......
This sucks i did the back to stock odin file dl09 file but its not working.... im just tryimg to get to an updated rom can someone point me in the right direction
Sent from my Wifes M865 using XDA Premium App
Click to expand...
Click to collapse
thats because the version of cwm you are running supports ext4 only, not rfs that powerwashed gingerbread is built on. Make sure you have cwm 2.5.1.x red recovery. There is no need to go all the way back to eb01. the stock ed05 package is fine.