Related
Hello,
I dont know if it's just me or if anyone else here has a similar problem.
Apparently the contacts page has very small alphabets in the top horizontal menu, which makes it very difficult to read when I am multitasking 2 or 3 jobs at the same time.
Is there a software which has larger alphabets or can I increase the size of the font in the registry?
I do understand that holding down the cursors skips throught the alphabets fast but I need something that has an instant access to the contact list. I have more than 1500 contacts and searching them with my thumb besomes a pain.
Any suggestions will be welcome.
Thanks.
rohseq
Did you notice that you can switch through the categories by pressing the contacts button several times? Provided that you maintain categories with your contacts though.
Did you notice that you can switch through the categories by pressing the contacts button several times? Provided that you maintain categories with your contacts though.
You can also keep the "down button" pressed down for a few seconds, and youll get an option to scroll through the alphabet.
I never use the letters at the top anymore.
Hello rohseq, I think maybe you can try this application Inesoft Address Book instead of the original contacts. This application will provide to you with much bigger alphabets at the bottom.
Thanks a lot seasky. I will try it. Looks very much like something I need.
Regards,
rohseq
[REF] *Blackstone Hints & Tips* - Things you may not have known. UPDATED 30th July.
MOD Edit HDuser
This thread has now gone Wiki and can be found under
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_tboy2000
I would like to thank Screec for his help on formatting the Wiki page and tboy2000 for this great collection of information.
End MOD Edit
1. Using the Back Key
You can use the actual back key at the bottom of your phone to go back a web page or two in Opera, instead of bringing up the Opera menu and selecting the back arrow.
2. Exiting Volume Screen
For quick exit of the volume screen, tap anywhere in the dark grey background surrounding the vertical slider button.
3. Reduce Errors in Typing
In Input options, disable the number of words to show in T9 for less mistakes when typing and thus faster entry.
4. Improve Photo Thumbnail Resolution in Photo Tab
Modify or tweak a photo (such as adjusting brightness) using a image editor directly on your HD (eg: Resco Photo Viewer) and save and overwrite the original. This makes the photo thumbnails on your Photo Touchflo 3D tab hi-res instead of low-res.
5. Change the Order of Photos in Fav Album
Modify or tweak a photo (such as adjusting brightness) using a image editor directly on your HD (eg: Resco Photo Viewer) in the order you want your photos to appear on your Photo Touchflo 3D tab, as they are displayed in order of last modified/created date. The first photo you modify will be the last to show in your Photo Touchflo 3D tab and vice-versa.
6. Panning Around Zoomed Photos
Touch and hold a zoomed in photo until you see a white outlined box appear in the corner. You can now remove your finger from the screen and drag and pan the photo to see more of it.
7. Hi Res Contact Photos
Assign contact photos on your SD card directly to specific contacts for hi-res thumbnails. If you assign contact photos in Outlook and then sync, the contact photos on your phone will be low-res.
8. Better Contact Scroll Search
When scrolling Contacts, tap the letter AFTER the name you are looking for to make your results list from the top of the screen instead of the bottom of the screen. Eg: If you want to get to the 'P' names such as Paul tap 'Q' instead.
9. Hidden Weather Animation Easter Egg
In the Weather Touchflo 3D tab, tap on the black background to the left of the title 'Weather' and then immediately to the right of the title, again in the black background to see a hidden Easter Egg where the weather animations are cycled through. You have to be quick with your 2 taps.
10. Have Category Folders in Start Menu
Using a file explorer, add 5 new folders to your 'Start Menu' folder. Name them like: Web, Travel, Utilities, System and Media. Copy relevant shortcuts from you 'Programs' folder in your 'Start Menu' folder to each of these new folders. You will need to use a 3rd party file explorer to unhide system files and rom files to see the pre-installed icons to copy them to your folders. These icons are '.ink' shortcuts. Also copy the entire 'Games' folder and 'Office' folder from your 'Programs' folder direct to your 'Start Menu' folder. Finally uncheck all checked boxes in Menus in Settings page. This will allow all 9 folders to show in your Start menu on your home page, where you can access specific apps much quicker. Remember each time you install or remove a program/game, you have to either copy the new 'ink' icon to your category folder or delete it.
11. Use 3rd Party Tweaking Apps
Use 3rd party apps like 'Advanced Config', 'HD Tweak' and 'SKTools' to tweak and optimise your HD further.
12. Disable Beam
Disable 'Beam' in Settings to conserve power.
13. Haptic/Vibration Feedback on HD
Use 3rd party app 'Touch Response' 0.02.2 to add haptic feedback on your phone to feel small vibration everytime you touch the screen in any app. Ideally useful for Keyboard entry.
14. Protect Screen from Breaking
If you carry your phone in your jacket pocket, make sure it is with the screen facing your body to protect the glass from accidental external jolts/pressure.
15. Cover Up Blemishes on Casing
You can use a black permanent fine tip marker pen to cover up scrapes on paintwork of housing. Rub firmly back and forth with your fingertip after a few seconds wait after applying pen.
16. Power Off Reset Action
Turn the phone off and on if you want to reset without taking the cover off or the latest version of HD Tweak installs a Reset icon which you can tap.
17. Temporary Stylus Attraction to Casing
Once you have taken your stylus out and you need a spare hand for a quick second, you can temporarily stick it magnetically underneath your HD along the right edge - instead of having to put it back in and then take it out again.
18. More Contacts per View
Show more contacts per page if you check "show contact names only" in 'Contact' options. You get 18 names per view as opposed to 12 and a half.
19. Fastest Way to Write New SMS
Quickest way to write a NEW text message is through the 'Contacts' list and NOT through the SMS Touchflo 3D tab. Best to assign a softkey to 'Contacts' so it is instantly accessible from your home page.
*Number of taps through Contacts is 3 or 4:
1st: Tap 'Contacts'.
2nd: Scroll to a name.
3rd: Tap the name
4th: Tap 'Send text message'
Automatically ready to start typing.
(Can be only 3 taps if your contact is within the first 18 contacts listed so no scrolling is required. This is based on using middle font size and "show contact names only" checked.)
*Number of taps through Messaging is 6 or 7:
1st: Tap Message tab
2nd: Tap new message icon
3rd Tap 'To:' text
4th: Scroll to a name
5th: Tap the name
6th: Tap the message area to shift the cursor from the 'To: field to the message field.
Now ready to start typing.
(Sometimes this can be 7 taps if you have more than one number for a contact and it asks you to choose which number to send the text message to. Amazing it does not automatically recognise a mobile number.)
20. Super Fast Text Entry
Use the standard built in (non HTC) Keyboard for super fast text entry with a stylus. Don't forget the gestures. Stroking upwards from a lowercase key inputs a capital letter. Stroking rightwards from any key to another inserts a space. Stroking leftwards from any key to another deletes a character. Stroking downwards from any key creates a new line. Using the Small keys means you don't have to switch to the numbers keyboard as all numbers appear above the QWERTY line. Even faster entry.
21. Keyboard Usage
When using the HTC keyboards, pressing and holding a key for a second or two will input the small grey character inside the key.
22. Contact Entry in SMS
If you start typing part of a name in the 'To:' field and hit enter, you will get a possible contact name to approve by hitting enter again. If there are more names to choose from, the arrows will turn white for you to scroll through the names by using the dpad buttons at the bottom of the keyboard.
23. Zoom Size and Zoom Location in Photo
When viewing a photo in the 'Album', you can not only choose where to zoom into but how much to zoom into. If you gesture a clockwise circle in the middle of the photo, then the photo zooms in with the middle of the photo filling the screen. If you gesture a circle near the top right corner, then that specific area zooms in to fill the screen. Also if you gesture a small circle you get maximum zoom. If you gesture a large circle then the photo only zooms in a little. An anti-clockwise circle gesture will zoom out the photo. Vary your circle widths to zoom in at various degrees.
24. HD Friendly Facebook Website
For a HD screen friendly Facebook website, rather than go to the full website, try the iphone version: iphone.facebook.com
You may need to double tap to zoom out.
25. Messaging Gestures to Ease Use
In 'Messaging' you can move from message to message or account to account just by swiping your thumb left or right across the screen. Imagine each message/screen is laid out before you horizontally in a row, left to right with the most recent message on your far left and your oldest message on your far right. By shifting all messages to the right gets you to the beginning of the row and to the newest message. Vice versa for older messages. Visualising this as you swipe lets you know if you are going up or down your email/sms list.
26. Activate Links Without Zooming-In in Opera
If you are tired of having to double tap a web page to zoom in just to activate a link, try this:
In the Opera url bar, type: 'opera:config' (without the ' ' ). Click on 'Adaptive Zoom'. Next change the default number in 'Minimum Overview Zoom' to 70 or higher. Scroll down a bit and hit 'Save' and restart Opera. You can now click on links with your stylus when you are fully zoomed out on a web page.
27. Using the Casing Buttons in Darkness
To see the four hard buttons in the complete dark, place one hand parallel with the bottom of the phone. The light from the screen reflects back onto the buttons making them clearly visible. Alternatively it is also quite easy to estimate where the buttons are by visually dividing the lower edge of the backlit screen into quarters and pressing below the relevant section.
28. Increase Quality of Photos
To increase the quality of photos, open the Camera, go to Settings, Advanced, then Image Properties. Increase Contrast to 5, Saturation to 5, and Sharpness to 4. Now you will have better definition and much more realistic colours. Also don't forget to choose Super Fine under Quality in Advanced Settings menu.
29. Reduce Blurriness in Photos
To focus better, have shutter set just to Touch. After you have touched you have the whole three seconds to steady your hand and take a non-blurry photo.
30. Charge when Powered Off
Always charge your device switched off if possible. This makes the charging time shorter and helps the battery to "calibrate".
31. Activate Hidden Photo Modes
You can activate hidden photo modes using the 'HD Tweak' app. Make sure to leave the resolutions for these modes at 1 megapixel though or they may not work properly. For for the more advanced users, use the following reg entries:
To enable Burst mode:
Mobile Device\HKLM\Software\HTC\Camera\P6
set "Enable" on "1"
To enable Sports mode:
Mobile Device\HKLM\Software\HTC\Camera\P8
set "Enable" on "1"
To enable Video Share mode:
Mobile Device\HKLM\Software\HTC\Camera\P9
set "Enable" on "1"
To enable GPS Photo mode:
Mobile Device\HKLM\Software\HTC\Camera\P10
set "Enable" on "1"
32. How to Hard Reset your Phone
To hard reset your phone which means to delete ALL personal data and settings and have the phone in factory default conditions as if you turned on the phone for the first time after purchasing, press the following buttons:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.
Make sure you back up all your data such as Contacts, Appointments etc or they will be gone forever.
33. Clean your Camera Lens Often
Remove the back cover and gently clean your camera lens with a soft cloth. You would be amazed to find fingerprints or dust on it.
34. Install Official HTC Hotfix
Sometimes your screen may stop responding for about 3 to 5 seconds when running an application that needs to use the stylus to click the screen repeatedly within a short time. Apps like SMS, email, solitaire, etc. The Hotfix will enhance the response time. Almost everyone should install the official hotfix from the link below. Please read the instructions carefully in the link as it only works if your rom is LESS than version 1.19.xxx.x.
http://www.htc.com/europe/SupportViewNews.aspx?dl_id=448&news_id=16
35. Quick System Status Menu Exit
When you tap the status icons on the top bar and want to immediately exit the screen, just tap anywhere in the grey background.
36. Enable Analogue Clock
If you prefer to see an analogue clock instead of a digital clock on your title bar, tap on the main clock on your home page, then the 'More' tab and then check "Display the clock on the title bar in all programs". Finally, when you see the digital clock on the title bar, tap and hold it and choose 'Analog'.
37. Resolve Squeaky Back Cover
A temporary solution is to use small Post-It notes paper to stick to the inside of your cover.
38. Cheap Security Measure for Lost Phone
If you were to lose your phone how could someone know who it belongs to, to return it? What if your battery dies and the finder cannot access your Owner page? What if you have a lock code on your phone that your finder cannot enter to get access to your Owner or Contacts page? A simple solution to all this is to write on a 2"x2" piece of paper the following words or similar: "If you find this phone, please call 07890 xxx xxx to reunite the phone to its rightful owner and claim a cash reward of £XX. Thanks!" Stick this slip to either the battery or the inside of the back cover. You are hoping when someone finds the phone, the first thing they will do is take off the cover and try to put their sim in it and discover the message. Of course you will have enabled sim lock on your phone to prevent them using the phone straight away. Seeing as they can't access or use the phone to their advantage, they may go the easy route and go for your cash reward. If you offer say £40 reward, it is still cheaper than buying a new phone and having all your personal data back - especially if you have no insurance. Let's just hope that there are honest people out there that just might pay attention to the message. You never know so you may as well try it.
39. Tube/Subway Map for HD
Do you want a train map for your HD? Simple. Go to 'Google Images' and find your underground train map for your country and right click to save it. In 'Photoshop' or any PC image editor, tweak it to make it more sharp and crop it if necessary. Choose 'Save for web' option to optimize file size and speed loading on HD. Save the image to your 'Favourite Album' on your Storage Card. The map will be there in your Touchflo Photo tab for you to zoom in and pan to find your routes and plan your journey. Very useful.
40. Clean your Pouch
Use sellotape wrapped around your fingers (sticky side out) to clean all the pocket fluff stuck to your suppllied pouch.
41. Unlock the First 6 Shortcut Slots in the Programs Tab
Using a registry editor, go to: HKLM (local machine) - Software - HTC - Manila - Programlauncher. There you will find 24 directories for the 24 shortcut locations. The first 6 (i.e. numbers 0, 1, 2, 3, 4, 5) have a value of 1 in the "read only" section. Change that to 0. Now you can go to the programs tab and erase those and then add the ones that you want in their place.
42. Add the Option to Reflow Text in Adobe Reader
To make pdf files easier to read on the HD, you can change a registry setting to activate the "Reflow" option in Adobe Reader.
In the registry go to current_user/software/adobe/adobereaderle.25/Enablereflow and change the value from 0 to 1.
Now, when reading a pdf file, go to Tools - View and select Reflow. Now zoom all you want without having to pan back and forth to read the text.
43. Exit Fullscreen Mode in Adobe Reader
If you are viewing a pdf file in fullscreen mode, just double tap on the screen to exit that mode. FYI: This still works even if you have activated the Reflow option mentioned in the previous tip on this list.
44. Faster Opera Browsing
For faster browsing use opera in portrait mode
45. Choose Which Default Number to Use in Phone Application
Touching the contact name in the Phone application list dials the default telephone number. This number may not be the one that you wish to use.
In order to use a different number, slide the "m", "t" (etc) letter on the right hand side of the contact line. The top of the screen will show you the number. In this way, you're able to choose the desired telephone number.
46. Opening Contact Details in Phone Application
Sadly if you tap on a contact name in the Phone application list, it automatically calls the contact. The only way to get around this is to swipe left or right on the contact which will highlight the name but not call it. Now you can tap on 'Menu' and then 'Open Contact'.
47. Increase Number of Tabs in Opera
To increase the number of allowed tabs from only 3 (default) to any other number, type 'opera:config' (without the ' ') in the url bar. Next scroll to 'User Prefs' and tap on it. Find the entry 'Maximum Allowed Tabs' and alter the number here. Scroll down to save and then restart Opera to see changes.
48. Contacts - Alphabet Bar Scrolling Up v Down
If you slide your finger down the Alphabet bar and stop at a letter, the first entry for that letter will show at the bottom of the list. However, if you scroll UPWARDS and stop on a letter, the first entry for that letter will show at the TOP of the contacts list which is how it should be.
49. Show Vertical Alphabet Scroller in Contacts
In 'Contacts', click on Menu then Options. The first option is called "Show alphabetical index". When this option is enabled you get an alphabet index at the top of the screen - "old style". If this option is disabled, you get the bar on the right side of the screen, which is much better. Some of you may already have the vertical scroller enabled.
50. Get True 5 Mega pixel Resolution When Using Camera
To get 5MP instead of 4MP resolution when using your camera, you must switch off Widescreen mode in the 'Advanced' Menu.
* Normal screen = 2592 x 1944 pixels = 5,038,848 pixels = 5MP
* Widescreen = 2592 x 1552 pixels = 4,022,784 pixels = 4MP
51. Use Gestures to Advance Days and Weeks
When using 'Calendar', if you are in Agenda or Day view, swiping the screen left or right will advance or go back one day at a time. If you are in Week view, swiping the screen left or right will advance or go back by week. If you are in Month view, swiping the screen left or right will advance or go back one month.
52. Get Better Video Quality When Using Camera
Use MPEG format instead of H.263 for better quality video output. This option can be found by going to the Advanced Setting from the Video Settings menu. Once there, go to Capture Format and change format if necessary.
53. Set MP3 as a Ringtone
In Windows Explorer, you can right click an mp3 file and choose to set it as a ringtone.
54. Improve Speed Access of Micro SD Card
Most Micro SD cards come already formatted as FAT 32 using 32kb clusters. To speed up your Micro SD access, reformat your Micro SD card to use 64kb clusters instead of 32kb clusters (FAT 32 remains the same). Warning: formatting will permanently erase all data on your Micro SD card so be sure to copy all data on it to your PC and the copy them back again after the format. You can use SoftWinter's StorageTools app to reformat the card.
55. Use Titles Instead of URLs for Opera Bookmarks
When adding and saving a new bookmark in Opera, be sure to let the web page fully load and THEN save it as a bookmark. Doing so, your bookmark will use the friendly title name for the web page. If you add a bookmark while the page is still loading, your bookmark will be using the url address as your bookmark's title.
56. Increase Frame Rate of Camera
If you want to increase the FPS of the camera to speed up picture processing, just turn down the brightness to -1.5 or -2.0.
57. Increase Wrting Space in SMS
Go to this site: http://www.ghisler.com/pocketpc.htm and download the 'arm/xscale/pxa'.cab file. Go into Explorer and run the cab file from wherever you saved it, and install it. Now go to Start > Programs and run 'Total Commander' that you just installed. Open the directory 'Windows' and scroll down to find 'thread_sms.htm'. With 'thread_sms.htm' highlighted click 'File' then 'Edit'. Scroll down through the file until you find the line
'<Inbox:content id="COMPOSESUBJECT" width="98%" height=35'
Change the value for height from 35 to 70 and then click 'File' then 'Save'. Soft reset the phone and your space for typing a message should be bigger.
58. Increase Speed and Fix Lag of Keyboard Tapping
Use a registry editor to make the following changes. Go to:
HKEY_CURRENT_USER\ControlPanel\Keybd
Find "InitialDelay"=dword: dec - change to 775
Find "RepeatRate"=dword: dec - change to 23
Also set the suggested words to a lower number such as 0 and disable auto-correction of words. Now you should no longer hvae misspleled wrods.
59. Increase Resolution of Panoramic Photos
By default, panoramic photos are less than 1 mp. This registry tweak increases resolution to about 7 mp.
Go to: HKLM/Software/HTC/Camera/P3
Adjust MainCamCaptSize to 1024 and MainCamSupportCaptSize to 1744. Soft reset.
60. Quick Access to Manila Alarm Page
You can go direct to the Alarm page from the Manila Home screen by tapping the alarm info text in the lower right corner below the flip clock.
61. How to Calibrate Screen if Stylus Can't Navigate the OS
To align screen if it is not usable, press and hold Vol Up and Vol Down buttons together and tap the screen. You are now automatically taken to the screen calibration screen.
62. Improve Suggested T9 Dictionary With Custom Words
The Blackstone has a very useful hidden application in the Windows directory. You need to unhide hidden system and Rom files in order to find it and you can do this by using a 3rd party file explorer such as 'Resco File Explorer'. Find the file "eT9MyWords.exe" in the Windows directory and add a shortcut to this file in your Windows/Start Menu folder.
When in the application, add the most common words you use when using the keypad such as names, locations, user names, email addresses and other words not common in the standard T9 dictionary. For example if you are based in London, UK you could add the following locations:
Leicester, Piccadilly, Tottenham, Soho, Charring, Euston, Trafalgar, Clapham
and words such as BRB, DVD, coz, lol, xoxo, [email protected], ciao, etc.
63. Quick Access to Last Manila Tab
Go direct to the last tab of Manila by flicking towards the right anywhere on the screen above the tabbed scroll bar
64. Add Favicons to your Opera Bookmarks
Make sure a bookmarked web page is fully loaded and save and overwrite your existing bookmark with the same title to also save the favicon icon for that bookmark. This even works with pre-installed bookmarks. Just save as the same bookmark title. You can only see the icons when accessing the bookmark page through Opera and not through Manila.
* Latest update: Added entries 60-64
MOD Edit HDuser
All entries up to number 52 have now been added to wiki
One more reserve for luck!
Hi Tboy,
are the latest updates the highest numbers? - or they grouped by functionality
Thanks
Hi! The latest entries will always be the last few numbered (highest numbers). You can always check what has been added that day at the end of the list.
Reset button hole
Probably gone unnoticed because of the new thread:
Take a tiny drill, remove the backcover from the Touch HD
and drill a tiny hole in the backcover on the exact spot where the reset button is.
Re-attach the backcover on your HD.
Use a paperclip everytime you need to reset your device.
Works like a charm, no hassle of removing the backcover anymore.
Don't understand why HTC didn't do that.....
Fab idea. You probably can use hand nail drills that women use to add diamond studs to their nails. How would u know where to drill a hole and make sure it is lined up exactly? I guess a safer alternative is just to use the software reset apps like in Tweak HD or made by Singh.
Dodger said:
Probably gone unnoticed because of the new thread:
Take a tiny drill, remove the backcover from the Touch HD
and drill a tiny hole in the backcover on the exact spot where the reset button is.
Re-attach the backcover on your HD.
Use a paperclip everytime you need to reset your device.
Works like a charm, no hassle of removing the backcover anymore.
Don't understand why HTC didn't do that.....
Click to expand...
Click to collapse
Or install the HD Tweaks utility. The latest version also provides a HD Soft reset option in your start menu. No need to drill anything.
Dodger said:
Take a tiny drill, remove the backcover from the Touch HD
and drill a tiny hole in the backcover on the exact spot where the reset button is.
Re-attach the backcover on your HD.
Use a paperclip everytime you need to reset your device.
Works like a charm, no hassle of removing the backcover anymore.
Don't understand why HTC didn't do that.....
Click to expand...
Click to collapse
HTC doesn't do that because they think that Diamond user use it too many time (so they need to use it)
On HD their rom are really stable, so why have a reset button when concurrent doesn't have it ? it's a proof of weakness.
So just hide it
Sometimes my HD hangs and is really doing nothing.
Mostly during use of Opera and sometimes as a result of invalid logins.
The 4 buttons on the bottom vibrate when touched,
but no other response.
Even after 30 minutes nothing happens.
Therefore, no software solutions is possible.
And so, this solution works fine for me.
What is about pressing the power button for 5 seconds (or something like that). Other users were saying that this is exactly the same as a soft reset.
As I haven't my device yet, I can't check it, would somebody of you mind?
johnpatcher said:
What is about pressing the power button for 5 seconds (or something like that). Other users were saying that this is exactly the same as a soft reset.
As I haven't my device yet, I can't check it, would somebody of you mind?
Click to expand...
Click to collapse
Single press would lock the phone and shut down the display panel, continously holding the powerbutton would shut the device down completely. So al you need to do is to power it up again, works the same as soft resetting the device but only takes a little longer, advantage is that you do not need to remove the battery cover to reset your device.
Even the last one is not working while my HD hangs.
So for me there was no other solution than drilling
the tiny hole and using the reset button.
The problem occurs also when using to much links
to frequent after each other.
Somehow the device gets confused and hangs....
Hi,
Here translation in french of some tips and more (.net 3.5 ...) :
http://celogeek.free.fr/mobile/mobile-trucs-et-astuces/htc-hd-trucs-et-astuces/
Thanks a lot man, it's wonderfull !
lots of useful tips here. someone needs to convince all cookers to include this in their roms as the help file or default start page in browser
needs more stuff though
Dodger said:
Sometimes my HD hangs and is really doing nothing.
Mostly during use of Opera and sometimes as a result of invalid logins.
The 4 buttons on the bottom vibrate when touched,
but no other response.
Even after 30 minutes nothing happens.
Therefore, no software solutions is possible.
And so, this solution works fine for me.
Click to expand...
Click to collapse
Make sure you add the official Hotfix to fix the problem when phone hangs for a few seconds:
http://www.htc.com/europe/SupportViewNews.aspx?dl_id=448&news_id=16
Will add to post 2.
A tip I learned today... If you set background image using Today applet and image appears almost completely white instead of with original colors, use "Pictures & videos" application instead (not "Album" or "Camera" - these two don't have the option to set image as background). In "Pictures..." you can choose desired transparency level or disable it (to have original colors).
tboy2000 said:
Make sure you add the official Hotfix to fix the problem when phone hangs for a few seconds:
http://www.htc.com/europe/SupportViewNews.aspx?dl_id=448&news_id=16
Will add to post 2.
Click to expand...
Click to collapse
this fix is for rom under 1.19, so not concern anymore actually.
To focus better, have shutter set just to Touch. After you have touched you have the whole three seconds to steady your hand and take a non-blurry photo.
Click to expand...
Click to collapse
I really don't understand this sentence
Can you explain it more clearly please, the sense is out of my english knowledge
So, I have understood to push shutter touch button, and don't move at all during 3s? easy to do and common sens but what happen if people you take move ?
=======================================================================================
DredSensor v1.3a:
=======================================================================================
Now DredSensor should be compatible with other device than HTC Touch Diamond.
Historically, if you have tried to play a game needing left and right key on an HTC Touch Diamond, you noticed that they are 2mm wide and if you click next to it, you get back to home page or to dialing menu etc...
So I've written a prog allowing you to lock these 4 keys actions and replace it by classical key event (VK_LEFT, VK_RIGHT, ...).
In that way you can play tetris, and use "Pick-Up" and "Hang-Up" keys for going left and right.
I extended it to let you configure each app independantly, and choose between four (five) mode:
"HardKeySimul": replace the 4 keyz by classical key event
"Launcher": allow you to quicklaunch 4 app (that you define in the config wnd) when you double tap (not click, just tap) on one of those 4 keyz
"Scroll": allow you to scroll the current window by tapping those 4 keyz panel
"KeySimul": allow you to send left/right/up/down events by tapping those 4 keyz panel
"--- Disabled ---": Disable specific HTC Touch Diamond Sensor functionalities.
Now, i've added an alternative Key Mapping, that let you map an action (or another key) on normal click and long click event on any other key that the up-described four.
So if you don't have an HTC Touch Diamond, the only mode you can choose is "--- Disabled ---" but you can define "other key mapping".
Link ->: DredSensor-v1.3a
To use it, you need:
1) A Windows Mobile SmartPhone
2) Install the .cab
3) Reboot your SmartPhone
4) Run a game (or app or ...)
5) Get your stylus out and back-in, in less than 1 second
6) Click "Yes"
----- A config window opens:
7) Choose the Type you want.
8) Reassign the actions to the events, if needed.
9) Assign "other key mapping", if needed.
10) Click "Ok"
Other Key Mapping:
To add a key mapping, a popup opens and ask you to press a key.
If you want to assign an action to normal clic, just clic on the choosen key.
If you want to assign an action to long clic, clic more thant 1 sec on the choosen key.
Then you have to choose the action, and it's done.
If you only assign an action to a long clic on a key, a short clic on this key should work transparently.
Have fun.
=======================================================================================
If you like this program, feel free to donate:
=======================================================================================
==========================================================================================
Version history:
==========================================================================================
New features in v1.3a:
=====================
Added an alternative key mapping that Should be compatible with any Windows Mobile device.
Added the "KeepAlive" option. Check this if you want DredSensor to prevent the smartphone to sleep when this application is loaded.
Added possibility to Enable/Disable DredSensor:
Exemple of C++ code to do this:
#define WM_DREDSENSOR_START WM_USER+22
#define WM_DREDSENSOR_STOP WM_USER+23
Disable:
HWND m_hDredSensorWnd=FindWindow(_T("DredSensorWnd"),NULL);
if(m_hDredSensorWnd!=NULL)
SendMessage(m_hDredSensorWnd,WM_DREDSENSOR_STOP,0,0);
Enable:
if(m_hDredSensorWnd!=NULL)
SendMessage(m_hDredSensorWnd,WM_DREDSENSOR_START,0,0);
New features in v1.2g:
=====================
Fixes a few bugs
Fix the bug in config window when loading prog list
Added a debug mode:
================
For activating it, just launch DredSensorDebug.exe (in /Program Files/DredSensor).
First it will tell you if DredSensor is running or not.
If it's running, it will activate/deactivate the debug mode so you will find a log in /Program Files/DredSensor/Log
If you have trouble with DredSensor:
Restart your HTC
Launch DredSensorDebug (to activate log)
Wait for DredSensor to stop working
Launch DredSensorDebug to know if it's still runing or not.
PM me the log, the config.ini and a description of the problem.
New features in v1.2b:
=====================
Tried to fix the conflicts with TouchLockPro and similar, hope it works (thanks for those who can check this out)
New features in v1.2:
=====================
Fix "not working bug" with new ROMs
Allow you to choose wether you block the scrolling wheel or not
Allow you to disable the vibrator effect.
Allow you to delete configs.
Tips:
=====
If you upgrade to this version, you can keep your config file.
To define a profile that applies on every applications, launch config tool and edit "Default" config.
If the key you want to affect is not listed, you can define it manually:
Type "Key:[email protected]@", with @@ = VKey code of the key you want to affect.
You can find VKey code list on : http://msdn.microsoft.com/en-us/library/bb431750.aspx
=======================================================================================
DredSensor v1.1d:
=======================================================================================
Link ->: DredSensor-v1.1d
New features in v1.1d:
=====================
Let you choose which Key/Action you affect to each key.
Launcher Mode let you affect an Action for:
Double Tap event
Click event
Long click event
An icon for config tool is created in Program list.
Cache Program List for quick loading in Config window.
Fixes a few bug from v1.1, v1.1b and v1.1c
Tips:
=====
If you upgrade to this version, your config file will be cleared (sorry ).
To define a profile that applies on every applications, launch config tool and edit "Default" config.
If the key you want to affect is not listed, you can define it manually:
Type "Key:[email protected]@", with @@ = VKey code of the key you want to affect.
You can find VKey code list on : http://msdn.microsoft.com/en-us/library/bb431750.aspx
Wonderfull!!
the app is working good for me now! I just love the scrolling with only a touch on the d-pad
Thank you!!
I suggest you stop making a new thread for every new version and instead update your original thread and post that you've updated it.
After installing and lunch program .... i cannot see any of EVENTS on Events tab. Windows "wait gif" is rolling all the time and nothing happen :/ (i talk about mapping under HardKeySimul
Kraize said:
I suggest you stop making a new thread for every new version and instead update your original thread and post that you've updated it.
Click to expand...
Click to collapse
That's what i wanted to do but i didn't found a way to update the post title...
Is there one?
thanx for the update I'll try it and report
Thanks for the new version! And thanks for adding the OK button command!
Seems to be working better than the last version although pressing the back key (which I have mapped to click right) a few times in quick succession does seem to send a back command. Pressing the home key in quick succession doesn't have this problem.
Also, I can't get the scroll wheel to work despite leaving the "Block scrolling wheel" box unchecked. Am I doing something wrong?
antlane said:
Thanks for the new version! And thanks for adding the OK button command!
Seems to be working better than the last version although pressing the back key (which I have mapped to click right) a few times in quick succession does seem to send a back command. Pressing the home key in quick succession doesn't have this problem.
Also, I can't get the scroll wheel to work despite leaving the "Block scrolling wheel" box unchecked. Am I doing something wrong?
Click to expand...
Click to collapse
Hmm.. For the scrolling wheel, i use a tricky solution that works on my HTC touch diamond. May be it doesn't work on your model or on your rom version...
If someone have an idea on how to send a "ZoomIn" or "ZoomOut" event to a window (or how to develop an application that catch ZoomIn and ZoomOut events), that would help a lot...
As far as i studied the problem, it seems that ZoomIn and ZoomOut events are equal to Up and Down keys, but comming from a "rocker" .. so I can send those Up/Down key events, but no idea of how to tell that this comes from a "rocker" (and i don't even have an idea of what a "rocker" is...)
Help?
Wow, this is great! I am still loving the ability to remap my home key (and the others), and I really like the new scroll wheel feature. Actually, for me, instead of zooming in some apps, it now seems to scroll just about everywhere -- which is perfect, I like that more anyway.
Is there any way to donate or buy you a cup of coffee? I'd like to as a thank-you.
What an absolutely brilliant program!
Thank you very much Dredger97!
Greeting
Slide
ldrn said:
Wow, this is great! I am still loving the ability to remap my home key (and the others), and I really like the new scroll wheel feature. Actually, for me, instead of zooming in some apps, it now seems to scroll just about everywhere -- which is perfect, I like that more anyway.
Is there any way to donate or buy you a cup of coffee? I'd like to as a thank-you.
Click to expand...
Click to collapse
Well if you insist , i've added a donate link in the first post...
Big thanks to all for your positive and constructive comments
TF3D and DredSensor don't play nice together
This program is awesome! You can do so much with it! However, I am having one small issue with it. It appears that if I use it on Manilla [TF3D], that it works initially, but over time it seems to stop working and ends up freezing Manilla. The start icon still works, all the unmapped hardware keys still work and the task bar is still live. Only Manilla is frozen. If I don't map any keys on Manilla, it works fine for hours. But it only takes about 1 or 2 hours before there is a freeze on Manilla.
Any thoughts on how to correct this? I would love to use this program from my Home screen on Manilla.
Long click event → vibrate/nomal
Hi,all!
i want "Long click event" of Endkey to set vibrate/nomal.
how edit setting?
sorry for my english!
thanks.
downloaded v1.2, opened resco picture viewer,Got stylus out and back-in, in less than 1 second, tapped yes.
than for type i choosed disabled, but nothing, every time i press any hw key it does what it need to do(home to home, back for back, hangup close..)
what am i doing wrong??
intel286 said:
downloaded v1.2, opened resco picture viewer,Got stylus out and back-in, in less than 1 second, tapped yes.
than for type i choosed disabled, but nothing, every time i press any hw key it does what it need to do(home to home, back for back, hangup close..)
what am i doing wrong??
Click to expand...
Click to collapse
Well, disabled means "DredSensor is disabled" so it's normal that your hw key do what it's supposed to.
If you want to disable the hard key, you can:
- set Type: Launcher
- set "Click" action = "Misc:Nothing" on one of the keys.
So it will catch the hard key action, and do nothing when you click on it.
For me it doesn`t work :/ windows "Wait" gif is always apperaing when i want to add new Event. :/ And there is no Events on the list ...
tried that but same when i press home it goes to home
i have tried that on wmp.
is this program always turned on,now when i remove and than get back in stylus no menu pops up?!?
Great Job!
the app finally works on my pda! so glad you solved this bug!
But I still have a little problem...the app runs fine, when I start the buttons work with the function that I chose, but after the first time I use it it crashes and stops to work. Am I the only one with this problem?
Thanks,
Michele
Dredger, I asked in the last thread, but didn't get a response.
As far as mapping other buttons goes, could you post a quick example of what I would type in the config.ini to map the center D-pad button to act as the "left" button.
I realize the buttons commands are listed in the link you provided in your first post, but I'm having a little bit of trouble figuring this out.
Thanks.
Great app btw.
I'm gonna have to have another go at this... For some reason I just can't wrap my head around the setup of the program.
Overview
The Zoom Bar is the little strip at the bottom of your Touch Pro 2's screen that is used in a handful of applications on your device. Wouldn't it be nice if you could use it in every application? Customized to fit your needs? That's where ZoomBarPlus comes in! You can map keystrokes for tapping, double tapping, long tapping, and swiping left/right. Default zoom functionality is also retained for all applications that are already Zoom Bar aware.
This app was developed because I wanted to have a virtual D-Pad of sorts. The default actions are swipe-right sends the down arrow, swipe-left the up arrow, double tap the action (center) button, long tap is backspace (which is "back" in Total Commander CE, which I use a lot). You can set it up any way you want!
ZoomBarPlus is a TRUE Windows Mobile service, so it does NOT use one of the precious few 32 slots available for processes. You can find more information about services here.
PLEASE NOTE THAT THIS APP IS DESIGNED TO WORK ONLY ON THE TOUCH PRO 2 (AKA RHODIUM / TILT 2) AND DIAMOND 2 (AKA TOPAZ / PURE) AND RELATED DEVICES. It has also been successfully tested on the HTC Imagio (aka Whitestone) and HTC Mega (aka Touch 2). If I'm missing any zoombar phones here that it works on or needs to be tested on, please let me know.
CodePlex
ZoomBarPlus development is hosted at Microsoft CodePlex! http://www.codeplex.com/ZoomBarPlus
License
Ms-RL
Tip Jar
Like this app? Want more like it or quicker updates? Tip a buck (or Euro or Pound or whatever) or two to help the author out! Click here to make a safe donation via PayPal.
Current features
- This is a BETA release, so it should be treated as possibly being unstable!
- Assign keycodes to tap, double tap, long tap, swipe left, and swipe right gestures on the zoom bar.
- Swipe gestures can repeat keystrokes when held, which is good for simulating holding down a D-Pad button, for example.
- Use a registry editor to change configuration settings (a config app will come soon).
- Disables itself if the user is using an application that handles the ZoomBar natively.
- Option to disable itself if the user is on a MessageBox (dialog), so as to not accidentally confirm an "are you sure" notification.
- VERY low resources used -- runs as a TRUE service and uses as close as 0% CPU as is possible by an app like this.
Future features
- Configuration app (.Net CF 3.5 required).
- New gestures: tap and swipe (with hold). Default will be D-Pad Left and D-Pad Right.
- AppToDate support
- New registry location for settings (for safety): HKCU\Software\Avian Waves\ZoomBarPlus
- Per-Window Class settings: ignore (default ZoomBar), or custom gesture settings
- Screen orientation aware (optional landscape flip swipe gestures)
Latest ChangeLog
- Fixed bug: if the active window changed while you were in the middle of a single tap delay, long tap delay, or swipe-repeat, it would continue repeating, even if the new foreground window class was one of the classes that handles the ZoomBar natively, leading to unexpected results.
- You can now specify whether you want ZBP to deactivate when the MessageBox class is in the foreground. This is useful for disabling ZBP when a confirmation message appears. In particular, with Total Commander CE, it was very easy to try to "tap" to activate a file and accidentally click the DELETE button simultaneously, leading to a Delete->Confirm Yes situation. Needless to say, it led to bad results when a lot of stuff you didn't want to delete was, in fact, deleted. :-( Now, it can't happen because ZBP will (by default) deactivate when the confirmation box appears.
Video
See it in action! Thanks to PocketNow for the great review!
http://pocketnow.com/tweaks-hacks/zoombarplus-use-touch-pro2-diamond2-zoom-bar-as-a-d-pad
Registry
All apps listsed in HKLM\Software\HTC\SmartTouch are ignored so that ZBP doesn't interfere with built-in zoom functionality of those apps.
Settings for ZBP are in HKLM\Services\ZoomBarPlus. Setting any keycode to zero disables the feature.
The service needs to be restarted (use DotFred's task manager) or the device soft reset for changes to take effect. This will get easier after this app is out of beta.
Tap = Keycode sent to focused window when the zoom bar is tapped once.
DoubleTap = Keycode sent to focused window when the zoom bar is tapped twice in succession.
LongTap = Keycode sent to focused window when the zoom bar is pressed and held.
SwipeRight = Keycode sent to focused windows when the zoom bar is swiped to the right (repeated for each 'segment' you pass).
SwipeLeft = Keycode sent to focused windows when the zoom bar is swiped to the left (repeated for each 'segment' you pass).
DoubleTapInterval = Time in ms that ZBP will wait for the second tap in a double tap.
LongTapInterval = Time in ms that ZBP will wait before executing the long tap action.
SwipeDoRepeat = Should the swipe gesture automatically repeat if you hold your finger down?
SwipeRepeatAfter = Number of ticks of a swipe before doing the swipe repeat.
SwipeRepeatIntervalFirst = First delay (in ms) before doing a swipe repeat.
SwipeRepeatIntervalRate = Interval (in ms) between each swipe repeat action.
VibrateInterval = Length of time to vibrate for haptic feedback.
VibrateSwipe = Provide vibration (haptic feedback) on a swipe action?
VibrateTap = Provide vibration (haptic feedback) on a tap action?
DisableOnMessageBox = Do not process ZBP command when the current in-focus window is a Message Box (dialog)?
The default settings are:
Tap = Do nothing! (0x00)
DoubleTap = Center "action" button - VK_TACTION (0x0D)
LongTap = Backspace - VK_BACK (0x08)
SwipeRight = Down Arrow - VK_TDOWN (0x28)
SwipeLeft = Up Arrow - VK_TUP (0x26)
DoubleTapInterval = 350
LongTapInterval = 650
SwipeDoRepeat = 1 (Yes)
SwipeRepeatAfter = 5
SwipeRepeatIntervalFirst = 350
SwipeRepeatIntervalRate = 100
VibrateInterval = 25
VibrateSwipe = 0 (No)
VibrateTap = 1 (Yes)
DisableOnMessageBox = 1 (Yes)
Notes
I would recommend NOT setting a keycode for single tap. The reason being that the zoombar seems to have its sensitivity bleed into the bottom part of the screen. So what tends to happen is you will tap a button that's on the bottom of the screen (such as a menu) and the zoombar single-tap action will activate as well. I cannot adjust the zoombar sensitivity, so I cannot work around the sensitivity in code. I found that double-tapping on the zoombar becomes intuitive if you are trying to achieve a D-Pad of sorts, which is why I developed this app.
Download
CAB Installer: http://zoombarplus.codeplex.com/releases
Source Code: http://zoombarplus.codeplex.com/SourceControl/list/changesets
FAQ
Q: ZoomBarPlus isn't working in <some application>. Is this a bug? How do I fix this?
A: ZoomBarPlus is designed to not be active whenever HTC's SmartTouch service sends zoom bar messages to applications that are "zoom bar aware." You may not realize how many applications are actually zoom bar aware. Som ROM cooks like to put in lots of extras (the default behavior is a simple scroll-down / scroll-up behavior, but no action button or anything more advanced). Even without a custom ROM, applications like RSS Hub and the Inbox are zoom bar aware. This can be annoying when the default zoom bar behavior isn't what you want. For example, in the Outlook Inbox, you might want ZoomBarPlus to scroll up and down through the list. It won't because the HTC default behavior is to resize text in the message view and do nothing at all in the list view!
To fix this, go into the Smart Touch registry key HKLM\Software\HTC\SmartTouch and either delete the relevant key of the application you no longer want the default zoom behavior for --OR-- change the value of ClassName in the key to something that will never exist as a window class (maybe add a dozen x's to the end of it). Soft reset after this. The config application (coming soon!) will allow you to enable or disable classes in SmartTouch more easily.
Nice App.
But How can I send only one "down arrow" when I swipe right?It always scroll too much.
This could be very useful. Thanks.
what if i wanna set "swap left" to arrow left and "swap right" to arrow right?
cccooo2007 said:
Nice App.
But How can I send only one "down arrow" when I swipe right?It always scroll too much.
Click to expand...
Click to collapse
Interesting idea. I was sending a keystroke on every time the zoombar "ticked" (moved far enough to generate an event). I can have it just send one per down and release. Next release.
jerrymc2 said:
what if i wanna set "swap left" to arrow left and "swap right" to arrow right?
Click to expand...
Click to collapse
I believe you can just switch the two keycodes for those from his list above. I'm about to test in just a minute to verify.
jerrymc2 said:
what if i wanna set "swap left" to arrow left and "swap right" to arrow right?
Click to expand...
Click to collapse
Edit the registry as stated in the first post. I'm going to create a config program soon. This is beta.
Here is a list of a bunch of keycodes that you all might find useful: http://msdn.microsoft.com/en-us/library/bb431750.aspx
You are looking for VK_TLEFT and VK_TRIGHT
This thing is amazing!! Wow you're awesome thanks so much for this!
jerrymc2 said:
what if i wanna set "swap left" to arrow left and "swap right" to arrow right?
Click to expand...
Click to collapse
thx1200 said:
Edit the registry as stated in the first post. I'm going to create a config program soon. This is beta.
Here is a list of a bunch of keycodes that you all might find useful: http://msdn.microsoft.com/en-us/library/bb431750.aspx
You are looking for VK_TLEFT and VK_TRIGHT
Click to expand...
Click to collapse
Yeah, that worked for me great. I just switched the values (38 and 40, respectively) for the two entries thx1200 mentioned, and then soft-reset.
The app seems to work pretty darn good overall...it's more like using the zoom bar as a scroll wheel, in terms of response/speed, than a D-pad, but it's still a very workable solution. The only place I haven't been able to get it to cooperate is in the outlook inbox screen (WM, not TF3D), but it's worked everywhere else I've tried it so far, including inside of apps like PHM_regedit.
Thanks thx1200!!
sirphunkee said:
Yeah, that worked for me great. I just switched the values (38 and 40, respectively) for the two entries thx1200 mentioned, and then soft-reset.
The app seems to work pretty darn good overall...it's more like using the zoom bar as a scroll wheel, in terms of response/speed, than a D-pad, but it's still a very workable solution. The only place I haven't been able to get it to cooperate is in the outlook inbox screen (WM, not TF3D), but it's worked everywhere else I've tried it so far, including inside of apps like PHM_regedit.
Thanks thx1200!!
Click to expand...
Click to collapse
That's because the Inbox has been modified by HTC to be "zoombar aware." You can prevent the driver from sending zoombar codes to the Inbox by deleting it's window class registry entry in HKLM\Software\HTC\SmartTouch. ZBP purposely does not respond to window classes in that key so as not to have two responses (the app's and ZBP's) firing at the same time.
In fact, if you want to override ALL zoombar behavior, delete all the window classes in that registry key. Keep in mind you will also lose the ability to zoom in the picture viewer if you get that aggressive.
Yes, it does perform less like a D-Pad and more like scroll-wheel. Either way, it gives you a lot more one-handedness than a device lacking a D-Pad (or wheel). I particularly enjoy the swipe-and-hold gesture where it just keeps scrolling. That's particularly d-pad-like. Scroll wheels can't do that.
EDIT: After modifying SmartTouch, a soft reset is required.
thx1200 said:
That's because the Inbox has been modified by HTC to be "zoombar aware." You can prevent the driver from sending zoombar codes to the Inbox by deleting it's window class registry entry in HKLM\Software\HTC\SmartTouch. ZBP purposely does not respond to window classes in that key so as not to have two responses (the app's and ZBP's) firing at the same time.
In fact, if you want to override ALL zoombar behavior, delete all the window classes in that registry key. Keep in mind you will also lose the ability to zoom in the picture viewer if you get that aggressive.
Yes, it does perform less like a D-Pad and more like scroll-wheel. Either way, it gives you a lot more one-handedness than a device lacking a D-Pad (or wheel). I particularly enjoy the swipe-and-hold gesture where it just keeps scrolling. That's particularly d-pad-like. Scroll wheels can't do that.
Click to expand...
Click to collapse
Ahh gotcha...I knew this app ignored any zoombar-enabled stuff, I just didn't realize the inbox fell into that catgory. I'll try tinkering with it in the reg like you suggested.
And yes, the swipe-n-hold feature is pretty sweet...and more like a D-pad than a scroll wheel. I'm still practicing/testing with it (there's a little learning curve to get used to the best thumb-motions), but I love it so far...thanks again!
Hi thx1200,
you are really crazy. You have also another hobby ? Great work. This app have also a very good potential.
mike2nl said:
Hi thx1200,
you are really crazy. You have also another hobby ? Great work. This app have also a very good potential.
Click to expand...
Click to collapse
I have too many hobbies. Many are being neglected! Plus regular 10 hour days at work. Sigh. I wish I was independently wealthy so I could just write freeware and write free music and spend some time on my other hobbies.
I had ZoomAdds installed, removed it, installed this... but I'm just getting the same scrolling I did before, no repeat, no taps, no vibration... Any ideas what else might be interfering?
Aha, found it, TouchLockPro.. Once I disabled it, scrolling.. changed I'll be wtaching this one, I still can't quite "do" a dpad, but been wanting it since I changed from my original Tilt.
sirphunkee said:
I believe you can just switch the two keycodes for those from his list above. I'm about to test in just a minute to verify.
Click to expand...
Click to collapse
you're a genius!
Thanks thx1200.
By the way,when you have changed zoombarplus registry items,you can make it effect by restarting the service using some task manage programs
awesome
I wish HTC would have thought out the zoom bar moor considering it only had one function that didnt work in every isntance.
Great!
Just now installed it on my diamond 2, didn't have any problems yet. Great keep it up!
Little more info
New here...so bear with me.
I have a ATT tilt2 that I just flashed to the new energy ROM from Mar 9th, standard WM 6.5 with sense 2.5.
I love the ROM, but never realized that the opera browser, 9.5 I think, that came with the stock tilt2 was the only opera browser that worked with the factory zoombar. The browser in this new ROM, 10.1 I believe, oesn't work with it...and I love my zoombar!!
Would this program help?
I want my app to have a search function but instead of searching locally, I want to search from the data on my web server and return the data in a JSON format. The good thing is, I know how to do this but I'm not sure how can I implement an activity with this kind of interface and behavior.
Legends are as follow: (Please see the mockup image that I attached below)
Black - Action Bar
Blue - Activity Container
Red - Searching (Search input and button here)
Green - List View (Fetched data from the web server)
Basically I want the user to input their search key and when they press the search button, a loading image will appear while the data are being fetched, when the fetching is completed I want the fetched data to appear on the list view on the same activity.
Thank you and have a good day!
clonedaccnt said:
I want my app to have a search function but instead of searching locally, I want to search from the data on my web server and return the data in a JSON format. The good thing is, I know how to do this but I'm not sure how can I implement an activity with this kind of interface and behavior.
Legends are as follow: (Please see the mockup image that I attached below)
Black - Action Bar
Blue - Activity Container
Red - Searching (Search input and button here)
Green - List View (Fetched data from the web server)
Basically I want the user to input their search key and when they press the search button, a loading image will appear while the data are being fetched, when the fetching is completed I want the fetched data to appear on the list view on the same activity.
Thank you and have a good day!
Click to expand...
Click to collapse
Your red searching layout can either be done manually using a horizontal LinearLayout with an ImageButton and an EditText, or, in my view far easier, with a SearchView in the ActionBar. Head over to this documentation page to set it up! You'll then get a call to onNewIntent with the search query and use that to update your ListView from the server.