Related
Hopefully this is the right place to post this question. I have installed the latest stable Cyanogen rom, but I'm running into a couple of problems:
1. I cannot send text messages that are more than a few words in length. I suspect this to be because the ROM was written with Sprint's settings, and those settings simply won't work with Cellular South users. Am I right in that there is something that I must change to get my texts to work correctly with Cellular South?
2. Reboots - this one is rather annoying. There is really no rhyme or reason as to why it does this. I can reboot my phone, and it will just sit there, with only SipDroid running in the background (as far as apps that I have added that are running), and my phone will reboot itself every few hours. Now, one thing that did happen was the 2GB MicroSD card that came with the phone died, and I replaced it with a Class 6 8GB MicroSD card. I can't remember if I had the reboot problems prior to that. Any suggestions to help me try to isolate the cause of this?
Thanks everyone.
Bump. Sorry about bumping this thread. Just do not want to have to go back to my stock ROM.
You need the APN settings for cs I think.
Sent from my HERO200 using XDA App
omrebel said:
Hopefully this is the right place to post this question. I have installed the latest stable Cyanogen rom, but I'm running into a couple of problems:
1. I cannot send text messages that are more than a few words in length. I suspect this to be because the ROM was written with Sprint's settings, and those settings simply won't work with Cellular South users. Am I right in that there is something that I must change to get my texts to work correctly with Cellular South?
2. Reboots - this one is rather annoying. There is really no rhyme or reason as to why it does this. I can reboot my phone, and it will just sit there, with only SipDroid running in the background (as far as apps that I have added that are running), and my phone will reboot itself every few hours. Now, one thing that did happen was the 2GB MicroSD card that came with the phone died, and I replaced it with a Class 6 8GB MicroSD card. I can't remember if I had the reboot problems prior to that. Any suggestions to help me try to isolate the cause of this?
Thanks everyone.
Click to expand...
Click to collapse
Does it by chance reboot when your GPS comes on? Open Maps (or anything you know will cause the GPS to become active) and see what happens. If so try the GPS fix. Used to be able to type ##GPSCLRX#, in Sense but you can't in CM, but there is a fix.
@ranger - it reboots even when the GPS is off (I generally keep it off). Thanks for the suggestion though. Maybe I just need to wipe it and reflash? Couldn't hurt I suppose.
@mrinehart - thanks. I'll do some searching for the "APN Settings" for Cellular South.
What's your total setup with cm6? Like kernel, overclock app and what not? But I believe all cdma users have the 160 character limit with the stock messenging app but if you use handcent or chomp you can bypass this by checking the split thread option in settings. Hopefully after hearing your setup I can help you figure out what's causing the reboots
Sent from my HERO200 using XDA App
@ThaSik1 - I was using just the stock messaging app. I didn't realize there was a limitation in the stock messaging app. My setup was just CM6 stable with the gapps installed. The only other apps that I had running constantly were Sipdroid (used for my GV + Gizmo5), and for overclock, I had been using the Overclock Widget. I have restored my stock CS ROM for now - but will applying the CM 6.1 RC1 ROM today.
Let me ask this - my stock CS ROM is 2.1. Would it be worthwhile to copy my APN configuration file from my stock ROM over the CM 6.1 configuration file? Or, would that cause problems?
To my knowledge it shouldn do any harm because the apn file that comes with Cyanogen roms dont have our carrier listed in it anyways. And if it does cause problems, i'll just attach my apn file (which is a modified version of cyanogen's to include Cellular south). But I dont think apn's do much good unless you have picture messaging..dont quote me on that tho lol As for your reboots, i can't see why it would be rebooting like that..If you wiped data and dalvik/cache, then flashed the rom, followed by gapps you should be good. Only thing i can actually see giving you problems would be if you had it overclocked too high since all heroes can't handle the 768 frequency
Flash Deca’s capped kernel to stop the random reboots
ThaSik1 said:
To my knowledge it shouldn do any harm because the apn file that comes with Cyanogen roms dont have our carrier listed in it anyways. And if it does cause problems, i'll just attach my apn file (which is a modified version of cyanogen's to include Cellular south). But I dont think apn's do much good unless you have picture messaging..dont quote me on that tho lol As for your reboots, i can't see why it would be rebooting like that..If you wiped data and dalvik/cache, then flashed the rom, followed by gapps you should be good. Only thing i can actually see giving you problems would be if you had it overclocked too high since all heroes can't handle the 768 frequency
Click to expand...
Click to collapse
I do have picture messaging on my plan - I take it I will need to go ahead and use my a CS APN file. If you don't mind, then yes - please do post the Cellular South APN file that you have. I really do appreciate your help your help. This forum rocks!
I have installed CM6 RC1, and everything seems to work great. I took your advice on not using the stock messaging app and am using Handcent instead. I set it to split the messages. That appears to have fixed the texting problem. Handcent reminds me of my old iPhone texting setup, which I really liked. I have also set the Overclock to max at 691 to make sure that I don't run it too high (or too hot for that matter).
hahahaha no problem honestly i'm just paying it forward my good friend cuz i was once in your shoes lol.. To use the apn file i'm attaching, use an app from the market called "apn backup & restore".. install the app, use a file manager to place the attached file in the folder labeled "ApnBackupRestore", then open the apn app, click delete apns, then click restore apns. You might also need to reboot for it to take affect too lol and sorry to step on your toes in case you already know all of this info But i really hope Cm6.1 works out well for you cuz my Csouth hero is loving it!! haha
P.S. the xml file inside the attached zip is what you wanna place inside the folder lol
ThaSik1 said:
hahahaha no problem honestly i'm just paying it forward my good friend cuz i was once in your shoes lol.. To use the apn file i'm attaching, use an app from the market called "apn backup & restore".. install the app, use a file manager to place the attached file in the folder labeled "ApnBackupRestore", then open the apn app, click delete apns, then click restore apns. You might also need to reboot for it to take affect too lol and sorry to step on your toes in case you already know all of this info But i really hope Cm6.1 works out well for you cuz my Csouth hero is loving it!! haha
P.S. the xml file inside the attached zip is what you wanna place inside the folder lol
Click to expand...
Click to collapse
Wow, thank you again for your help on this. And no, you certainly weren't stepping on my toes. Thanks for the steps to take - I wasn't sure how to do any of that to be honest and would have been searching this forum for a long while most likely.
So far, CM6.1 has been rocking! I'll let you know how the APN goes. Thanks again!
@ThaSik1 - so far, all of the texts seem to be working great. Thanks again for your help! It really is appreciated.
No problem lol glad I could help honestly I always send myself a picture message just to make sure the settings stuck lol but if you run into any issues just shoot me a pm or maybe Impaler cuz he's more knowledgeable about this stuff then me
Sent from my HERO200 using XDA App
ThaSik1 said:
No problem lol glad I could help honestly I always send myself a picture message just to make sure the settings stuck lol but if you run into any issues just shoot me a pm or maybe Impaler cuz he's more knowledgeable about this stuff then me
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Thanks. And go easy on us in the Egg Bowl this year. It's going to be an ugly blowout......... lol
Now, I just need to get rid of where it says Sprint. I think that's been covered in the forum somewhere, as I think I remember seeing that topic.
Ha hey you know us dogs go all or nothing man hahaha but I can help ya with that sprint text issue lol I have the Eri.XML file ya need in order to change that but I can't post it from my phone..give me a sec and I'll boot up the laptop to attach it
Sent from my HERO200 using XDA App
Edit: With this file (eri.xml), you need a file manager with root access (i know with estrong you can go to settings, scroll to the very bottom where root options is, then check the root explorer tab and mount file system. Once you back outta the settings copy the eri.xml file, look in the upper left corner and touch the slash button to end up on the root of your phone) Okay from there you wanna find the system/app folder and then paste the eri.xml file there. All ya need to do then is reboot and you should be good lol
ThaSik1 said:
Ha hey you know us dogs go all or nothing man hahaha but I can help ya with that sprint text issue lol I have the Eri.XML file ya need in order to change that but I can't post it from my phone..give me a sec and I'll boot up the laptop to attach it
Sent from my HERO200 using XDA App
Edit: With this file (eri.xml), you need a file manager with root access (i know with estrong you can go to settings, scroll to the very bottom where root options is, then check the root explorer tab and mount file system. Once you back outta the settings copy the eri.xml file, look in the upper left corner and touch the slash button to end up on the root of your phone) Okay from there you wanna find the system/app folder and then paste the eri.xml file there. All ya need to do then is reboot and you should be good lol
Click to expand...
Click to collapse
Thanks for the help. I copied that eri.xml into the system/app folder and rebooted, but my lock screen is still showing Sprint. I noticed that there wasn't an eri.xml in the system/app folder to start with. Perhaps that has been changed to a different location in the CM6.1 build?
That or i told you the wrong destination lol..my bad..Mine says its listed in the "/data" folder..try that and let me know if it works for ya
ThaSik1 said:
No problem lol glad I could help honestly I always send myself a picture message just to make sure the settings stuck lol but if you run into any issues just shoot me a pm or maybe Impaler cuz he's more knowledgeable about this stuff then me
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Looks like you've done a great job here But yeah, feel free to go to my CM Q&A if you need anything from me
ThaSik1 said:
That or i told you the wrong destination lol..my bad..Mine says its listed in the "/data" folder..try that and let me know if it works for ya
Click to expand...
Click to collapse
That worked perfectly! I'd buy ya a beer or three if I could. Thanks again for your help! You guys rock!
(wouldn't be the FIRST time
k, just wanna say i searched the word "texts" and dint get one hit in this thread. Thinkin' THAT can't be right but here goes...
Is there a way to send texts on this or becuz its wi-fi only, OR is that an "eyeroll question"?
Other than that shortcoming, i have to say my 1st 24 hours with this thing has been nothing but great.
I was one of those "whatintheworlddoineedatabletfor" ppl and i have to say i am madly inlove with this thing. i already had bought an ASUS MT91 Touch Tablet last fall (even tho it came with Windows 7 Home Premium, not Starter) but after just a few weeks it was just too slow to use at a desk and too heavy to use as a couch potato prop.
This thing picks up where my EVO leaves off and i'm lovin' it to pieces...
But again, what about sending texts? Is this capable of that? (and don't laugh, i KNOW i must be missin' something?
ty!
Ms D
Not from your own number unless you have an android phone too.
Text using Google Voice. Eventually people will recognize your GV number as well as your normal number (or if they're clever, they'll just add it to your entry in their contacts list).
I currently use "TextPlus" from the market, it works great and it's free.
No lag in message sending or receiving that I've noticed.
Google voice....
Sent from my Transformer TF101 using XDA Premium App
In my impatience... (lol)
.... I went ahead and bought & installed SyncMMS for 3 bucks which seems like it'd do the trick EXCEPT for the fact it keeps force-closing everytime i try to Register for a dropbox so it can "do its thing"... I sent a msg to the developer... But thanks y'all, appreciate all the replies : )
In the meantime. here's another dumm q... I know the Market Aps for Honeycomb are very limited right now, but again i MUST be doing something wrong, as i have seen so many posts here and there that say they downloaded thus and such on their Asus TF from Market and when i go there, i never find ANY. Just a handful. I read ALL apps should download but not "look right" or have a big black box around them, i'm not finding ANY apps i recognize....
Is there a way to bypass the Market and d/l straight from Internet, even if they won't look right, i wouldn't mind- i registered with App Brain but i'm not seeing it IF there is a way... : )
thanx again
If you're phone is also an Android device, try TexTab: http://forum.xda-developers.com/showthread.php?t=1133277.
Otherwise, Google Voice is your friend.
I also tried SyncSMS, and I didn't like it at all. It uses Dropbox as an intermediate storage facility and sends messages between devices via WiFi. The problem with that is that you have to set polling intervals. Put them too close (5 min) and your battery life suffers. Put them too far (30 min) and the app is useless since you lose the immediacy of SMS.
TextPlus works pretty well too
mrcerulean said:
If you're phone is also an Android device, try TexTab: http://forum.xda-developers.com/showthread.php?t=1133277.
Otherwise, Google Voice is your friend.
I also tried SyncSMS, and I didn't like it at all. It uses Dropbox as an intermediate storage facility and sends messages between devices via WiFi. The problem with that is that you have to set polling intervals. Put them too close (5 min) and your battery life suffers. Put them too far (30 min) and the app is useless since you lose the immediacy of SMS.
Click to expand...
Click to collapse
that makes a lot of sense... Will ck out ur link.... ty!
**Edit... Just saw it was a zip file... Do i need to be rooted?
that looks like a sweet apk.
I don't think you need to be rooted. Unzip the file and install the apk on both devices. You might have to check the unknown sources box in settings/applications/unknown sources. This will allow you to install the apk through file manager by clicking on it.
I'm gonna download it now and check it out.
Been testing TextTab, known bug that after tge TF sleep I loose connection to the phone. I think once wifi is implemented it will be a great app.
One good things about SyncSms, if say you're going over sea, you can leave phone on at home and bring the
TF, so long a you have internet connection you can get and send sms.
Sent from my Transformer TF101 using Tapatalk
baseballfanz said:
Been testing TextTab, known bug that after tge TF sleep I loose connection to the phone. I think once wifi is implemented it will be a great app.
One good things about SyncSms, if say you're going over sea, you can leave phone on at home and bring the
TF, so long a you have internet connection you can get and send sms.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Thanks for checking all that out, i will do it too when i get home. Learned something new thanks 2 u, eventho i've rooted my phone, replaced pngs, installed ROMS, modified things in themes i didn't like, YET i never knew a reg zip file could be installed on an un-rooted phone, so THAN U!
Think i prolly won't be using the SyncSMS after the issue u described, and as for it being good overseas, thats not a plus for ME, since the liklihood of me going overseas is pretty nil. Work, home, Jack In The Box is about as broad a travelling that i do...lol
I tried SyncSMS but the lag was unacceptable...I waited 5 minutes for a text that never came through.
If that could be fixed, then it would seem to be a great app
A few of you have been asking for a howto guide on improving the performance on your devices, and I have listened!
I have made for you all a video guide on how to get your 7.7 flying!
Enjoy!
Galaxy Tab 7.7 Speed Tweaks ADW EX [ROOT]
Thanks, some nice stuff in there, even if a lot of it is really a ADW.EX tutorial.
Just fyi, you have a typo in the video description--you say ADX EX launcher.
About Customize Menu--you can reorder (or remove theoretically, but this was buggy for me) the items that appear on the top bar and in the drop-down when you push the menu button. I use this so that I can have Add in the menu, because I keep the top bar hidden and there is no other easy access to add/remove/move home screen pages.
teiglin said:
Thanks, some nice stuff in there, even if a lot of it is really a ADW.EX tutorial.
Just fyi, you have a typo in the video description--you say ADX EX launcher.
Click to expand...
Click to collapse
Not bad for a single take and no editing though lol!
how did you set up you dolphin for tab browser to have the 4d scrolling between tabs
adinis78 said:
how did you set up you dolphin for tab browser to have the 4d scrolling between tabs
Click to expand...
Click to collapse
It's a native function of the Dolphin for Pad Beta v1.0
Jade Eyed Wolf said:
It's a native function of the Dolphin for Pad Beta v1.0
Click to expand...
Click to collapse
hmmm can seem to get mine to due it
EDIT: got it i saw the video again, i wasnt using the two finger tap
adinis78 said:
hmmm can seem to get mine to due it
Click to expand...
Click to collapse
Two finger tap on the edge of the web page?
Jade Eyed Wolf said:
Two finger tap on the edge of the web page?
Click to expand...
Click to collapse
Yep
Sent from my SGH-T959 using XDA App
Thanks for the hardwork on this tutorial on what your settings are and also I've seen a better view of your screen which apparently confirms my findings from your other video.
EDIT:
The ro.HOME_APP_ADJ=0 tweak really does wonders!
Thanks alot J.W. very nice job! & thanks for stepping up when all of us asked you to!!!!
EarlZ said:
Thanks for the hardwork on this tutorial on what your settings are and also I've seen a better view of your screen which apparently confirms my findings from your other video.
EDIT:
The ro.HOME_APP_ADJ=0 tweak really does wonders!
Click to expand...
Click to collapse
I have to try this when I get home, the homescreen redraw drives me nuts, and its completely unecessary imo!
EDIT - OMGGGGGGGGG finally, the tablet has no effing homescreen redraw lag, thank you Jade Eyed Wolf!
Oh, oh. Just did this and now the tablet won't start!!!! I just get the initial "galaxy tablet 7.7" screen and then it stays black....
Any ideas? The only thing I changed was this
"Add this line to "/system/build.prop":
ro.HOME_APP_ADJ=0"
Help!!!!!
can someone post a copy of their build.prop (6810)? Would that help?
I can get into recovery, but rebooting form there doesn't do anything.....
Anyone with any bright ideas?
I can get into recovery, but I can't connect to the device via the pc to get at the files. well, that isn't quite true, I can see them if I use a pgr called DROIDEXPLORER, I can copy from the device to the PC but not back the other way. So I tried to edit the build.prop locally and push it back (using droidexplorer) but the one on the device just stays the same with the edit above in it...
I'm now considering flashing a new FW as the only way to get the tab going again.
Any help?
followed instructions and still couldn't write to sd card with ES File Explorer. Can't tell with homepage redraw... What's bad is that this killed my internet connection. After rebooting, the status bar shows me connected to either my home wifi or my H+ service provider but I can't access the internet nor my local network... Restarting the 7.7, deleting the relevant lines, restarting my router/cable modem (still have internet on my main comp and ipad) all didn't help.
I guess I have to reflash my 7.7.
OK, so after a sleepless night (the little one was on full song) I reflashed my Tab this morning and way hey! It is back in the land of the living.
Pheww.
Jade, I think the hack to keep the homescreen in memory might need to be revisited? I followed the instructions to the letter. After applying the hack the device just would not come to life. It wasn't a case of screen-off, device on either. I plugged it in to a PC and there was nothing. The only way I could get the PC to see it was to start it in recovery.
Maybe it is just a combination of things on my machine and I guess these things can just happen, but I think it might be worth checking?
I'm totally happy with flashing now though
Just thought this could use a bump since it was so helpful to me.
daigled said:
Just thought this could use a bump since it was so helpful to me.
Click to expand...
Click to collapse
Thanks!
palexr said:
OK, so after a sleepless night (the little one was on full song) I reflashed my Tab this morning and way hey! It is back in the land of the living.
Pheww.
Jade, I think the hack to keep the homescreen in memory might need to be revisited? I followed the instructions to the letter. After applying the hack the device just would not come to life. It wasn't a case of screen-off, device on either. I plugged it in to a PC and there was nothing. The only way I could get the PC to see it was to start it in recovery.
Maybe it is just a combination of things on my machine and I guess these things can just happen, but I think it might be worth checking?
I'm totally happy with flashing now though
Click to expand...
Click to collapse
It worked for me (Galaxy Tab 7.7 wifi) so you probably entered something wrong... Actually I realised that after entering "ro." the keyboard inserted a space after the dot, so it looked like this: ro. HOME_APP_ADJ=0 and it is like this: ro.HOME_APP_ADJ=0 see the difference?
I realised right away and fixed it. If I were you I would try it again....
It works for me alright, I don't know if at the end uses too much ram and slows down other things, if it does I'll just delete that line and that's it....
Thanks to Jade W. good idea...
Dusko75 said:
It worked for me (Galaxy Tab 7.7 wifi) so you probably entered something wrong... Actually I realised that after entering "ro." the keyboard inserted a space after the dot, so it looked like this: ro. HOME_APP_ADJ=0 and it is like this: ro.HOME_APP_ADJ=0 see the difference?
I realised right away and fixed it. If I were you I would try it again....
It works for me alright, I don't know if at the end uses too much ram and slows down other things, if it does I'll just delete that line and that's it....
Thanks to Jade W. good idea...
Click to expand...
Click to collapse
Nope, just tried it again, result dead tablet... My tablet definitely does not like this line in build.prop
So, I would advise caution with this line. Take a backup before trying it or get comfortable with reflashing.
palexr said:
Nope, just tried it again, result dead tablet... My tablet definitely does not like this line in build.prop
So, I would advise caution with this line. Take a backup before trying it or get comfortable with reflashing.
Click to expand...
Click to collapse
HAs anyone got any bright ideas about pushing the original build.prop file back? ADB push just gives me "failed to copy 'build.prop' to '/system/build.prop': Read Only File
I'd rather just get the correct one in there than re-flash...
US TMo Leo running NexusHD2-Gingerbread V3.1 on NAND by tytung
My TMo Leo touch screen stopped working few days ago, b/c of that I can't do anything w/ it except receiving calls (I can pick up call by pressing the call key).
I am getting a Motorola Razr Maxx in couple weeks(hopefully), so I don't want to spend $50 to fix the touch screen.
All the remote control app I seem all require some type of setting up on the phone, which I can't do.
Couple questions
Is there any remote control app that doesn't require setup on the phone?
Is there a way to configure the device so it will boot up w/ WiFi Hotspot turn on?
If the WiFi hotspot turns on on boot, I can at least use my tablet to get online, email and make a call (through Google voice).
Thanks
tongslee said:
US TMo Leo running NexusHD2-Gingerbread V3.1 on NAND by tytung
My TMo Leo touch screen stopped working few days ago, b/c of that I can't do anything w/ it except receiving calls (I can pick up call by pressing the call key).
I am getting a Motorola Razr Maxx in couple weeks(hopefully), so I don't want to spend $50 to fix the touch screen.
All the remote control app I seem all require some type of setting up on the phone, which I can't do.
Couple questions
Is there any remote control app that doesn't require setup on the phone?
Is there a way to configure the device so it will boot up w/ WiFi Hotspot turn on?
If the WiFi hotspot turns on on boot, I can at least use my tablet to get online, email and make a call (through Google voice).
Thanks
Click to expand...
Click to collapse
Seems like youre in a real pickle lol . As far as i know , pertaining to remote apps , there isnt one which does not need initial setup . What you could try though is having someone else setting it up , then extracting the settings files and db files and using adb push to push them onto your phone and try that . Thats all i can think of . Best of luck !
Maybe have problem with your rom...??
Wipe all your data, task29,,,,
You can change to another ROM,,,if the problem from your ROM,,,
elesbb said:
Seems like youre in a real pickle lol . As far as i know , pertaining to remote apps , there isnt one which does not need initial setup . What you could try though is having someone else setting it up , then extracting the settings files and db files and using adb push to push them onto your phone and try that . Thats all i can think of . Best of luck !
Click to expand...
Click to collapse
That seem like a lot of trouble... but it may be the only way...
Thanks
ariebower said:
Maybe have problem with your rom...??
Wipe all your data, task29,,,,
You can change to another ROM,,,if the problem from your ROM,,,
Click to expand...
Click to collapse
Did all that already... nothing works...
Is your screen completly off or can U see your screen?
In android commander there is a virtual input with buttons and U don't need any setup on your phone....only a working ADB connection!
So with this panel U can easily navigate through system settings.
And there is also an input panel.
icke said:
Is your screen completly off or can U see your screen?
In android commander there is a virtual input with buttons and U don't need any setup on your phone....only a working ADB connection!
So with this panel U can easily navigate through system settings.
And there is also an input panel.
Click to expand...
Click to collapse
Screen works, just the capacitive not work.
I'll look into android commander. Thanks for the tip
take a look at this thread
http://forum.xda-developers.com/showthread.php?t=1213809
it worked for me
you will have to press it really hard
icke said:
Is your screen completly off or can U see your screen?
In android commander there is a virtual input with buttons and U don't need any setup on your phone....only a working ADB connection!
So with this panel U can easily navigate through system settings.
And there is also an input panel.
Click to expand...
Click to collapse
man... virtual input wouldn't work on my phone...
Shell Console seem to be working...
Anyone know how to turn on WiFi HotSpot from Shell Console?
Kameirus said:
take a look at this thread
http://forum.xda-developers.com/showthread.php?t=1213809
it worked for me
you will have to press it really hard
Click to expand...
Click to collapse
OMG... it worked... I had to press it really hard... to the point that I thought it was going to break the glass...
Not sure how long this would last, but hopefully it would work till my next phone gets here.
Thanks
Hello,
I am writing this to help other newbies who may want to switch to Cyanogen for the first time on their Epic 4G. There were a few things I needed to do after to get everything working the way I liked and I figure this will save some people time.
What do I need to do prior?
There are many how-to's which will help but I had my Epic stock rom rooted so it was as simple as flashing cyanogen through recovery. Here is the link for a "how-to" root the stock rom if you wish to do it this way. It was the easiest way for me though the official guide says "Rooting the stock firmware is neither recommended nor necessary."
http://www.youtube.com/watch?v=C9eaCtiS0Bo
Where do I get Cyanogen?:
You can download it here. I am running the 10.0.0 stable build.
http://wiki.cyanogenmod.org/w/Epicmtd_Info
I have no google apps:
This is a problem with any Cyanogen installation. Easy fix, download & install the gaaps package from the link below and your marketplace will be back.
http://goo.im/gapps
I don’t have Navigation:
Easy fix again, download the google maps app. Here is the app store link.
https://play.google.com/store/apps/...DMsImNvbS5nb29nbGUuYW5kcm9pZC5hcHBzLm1hcHMiXQ..
I don’t have voicemail:
While you can use any voicemail app I wanted the one I had on the stock rom. I linked the app below and your voicemail will be back as soon as you install it. You need to open the app after so that it will activate.
https://od.lk/d/MjRfMjc2MDY5MF8/vtt-sprint.apk
I am getting texts from 9016 every time I get a voicemail:
From reading it seems the stock rom blocks us from seeing these but they are in fact needed for voicemail to work. To fix this I used a free app called “RedList”. Simply add 9016 to the RedList within the app, change the settings to disable both notifications, and this will problem will be solved. Here is the app store link.
https://play.google.com/store/apps/...=W251bGwsMSwxLDEsImNvbS5saW5ub3IuUmVkTGlzdCJd
Text messages no longer have separate colors for me and my recipient:
The stock android text display is white and I hated this after getting used to Samsung’s nice colors but luckily you can solve this in two ways.
(One) A theme manager is built into the interface section of your settings page. After searching through almost every free CM10 theme I found this one I liked. It does NOT touch too many things only adding a brushed metal look and displaying text messages how I wanted them. There are a few colors to choose from but I went with Blue.
http://forum.xda-developers.com/showthread.php?t=1992980
(Two) Replace only the MMS app with one that is color coded. Please note that unlike the above, to reverse this down the road you will need to find a stock mms app package with an installer. This is good for people who are sure they want this and only wish to change the colors of the messenger, while the above is good for people who like to switch themes often being able to revert back at any second. Link for the colored mms app.
http://www.mediafire.com/?hcjukwwkj4y41h3
Morror: https://od.lk/f/MjRfMjc2MDY5MV8
Facebook pictures no longer sync with my existing contacts:
This is a small problem, but still one that I got used to having with the stock rom and wanted to correct. From reading this seems to be a problem related to later Android versions, not just Cyanogen. The fix for this is easy as well, search out a free app called “UberSync for Facebook”. I had the regular facebook app installed & logged in prior and UberSync logged right in, got the pictures, and updated my contacts.
https://play.google.com/store/apps/...wsMSwxLDEsInJvLndlZWRuZXQuY29udGFjdHNzeW5jIl0.
I no longer have Swype:
Despite having the nice physical keyboard (the whole reason I got the Epic) I still got used to using Swype here or there. I don't think I will be allowed to link this file here but you can find it on "certain" sites.
Notes:
Despite reports that Bluetooth can be problematic, I use it daily with an earpiece and have yet to experience any issues. GPS & 4G also work great. If any links are broken send me a PM! I check my email daily.
Get rid of the dropbox download links. Those are absolutely horrible when posting a guide for others to use.
nikon120 said:
Get rid of the dropbox download links. Those are absolutely horrible when posting a guide for others to use.
Click to expand...
Click to collapse
Why are they so bad? The bring you right to the download and I won't be deleting these files from my dropbox. Much better IMO than dealing with one of those sites where you have to wait 45 seconds for a download link to appear in a sea of other spam download buttons.
protivakid said:
Why are they so bad? The bring you right to the download and I won't be deleting these files from my dropbox. Much better IMO than dealing with one of those sites where you have to wait 45 seconds for a download link to appear in a sea of other spam download buttons.
Click to expand...
Click to collapse
Well...
No MD5/SHA1 to compare against to make sure you have a complete download.
People's dropbox tends to get too much traffic and the link becomes dead.
You basically cut out the original author(s) of the file.
Based off # 3: They could need the ad revenue, and/or want to track download activity if they're self-hosting.
nikon120 said:
Well...
No MD5/SHA1 to compare against to make sure you have a complete download.
People's dropbox tends to get too much traffic and the link becomes dead.
You basically cut out the original author(s) of the file.
Based off # 3: They could need the ad revenue, and/or want to track download activity if they're self-hosting.
Click to expand...
Click to collapse
I know this isn't directed at me, but the things I have on my box account are older things( Samsung Moment update tool), things I've done for myself, or things that I've found for other people. In other words, things many people don't care about.
Sent from my SPH-D700 using Tapatalk 2
nikon120 said:
Well...
No MD5/SHA1 to compare against to make sure you have a complete download.
People's dropbox tends to get too much traffic and the link becomes dead.
You basically cut out the original author(s) of the file.
Based off # 3: They could need the ad revenue, and/or want to track download activity if they're self-hosting.
Click to expand...
Click to collapse
#1 - I think more people are concerned with a working link, if they download the archive after and it somehow gets corrupted i'm sure they will just try again
#2 - Valid point though my files don't have a great enough of demand to warrant this. If this changes I will change my links.
#3 The only thing that wasn't mine with a dropbox link was the MMS app and I only mirrored it in case the original link were ever taken down. If it will make you happy I can include the original link as well. For the voice mail app, its simply the sprint one ripped from a stock rom.
Though your points are valid, I think you are sort of just being picky bud
Thanks for the VM download link. Only thing I want is task manager which I had installed on CM9. Is there stockish one that works for 10?
Try the flashable one from here
http://forum.xda-developers.com/showthread.php?t=1452004
Sent from my SPH-D700 using Tapatalk 2
swype
I reinstalled swype 3 or 4 times with various upgrades and it would always "expire" and I'd have to figure out how to get it working again. I am running 10.1 RC5 now and it has a decent generic swype-ish virtual keyboard. The thing missing is that you can't finish your text and go back and fix any misspelled words by touching alternate suggestions. You have to catch them as they come up. It seems like at first I could still do that, but I can't figure out how to get the suggestions to come back up.
I'm over swype.
Just flashed CyanogenMod 10.1... is there any built in overclocking?
I installed SetCPU and it won't step above 1000 MHz.
Kernel
Steelcitymetal said:
Just flashed CyanogenMod 10.1... is there any built in overclocking?
I installed SetCPU and it won't step above 1000 MHz.
Click to expand...
Click to collapse
You need a different Kernel. I have been using didy's kernel for a while. You flash CM10.1 and then you flash the kernel. CM10.1 has its own kernel that overwrites what you flash. So when you update, i think you have to reflash the kernel. I haven't screwed around with it since I installed rc5. I think I did CM, then the kernel, then the big mem patch. I never was able to figure out how to update the radio. I always ended up with "no voice service" or worse.
There is a thread in the developer forum that has the links to the kernel downloads. I am running one from may 30 and haven't updated.
boocephus said:
You need a different Kernel. I have been using didy's kernel for a while. You flash CM10.1 and then you flash the kernel. CM10.1 has its own kernel that overwrites what you flash. So when you update, i think you have to reflash the kernel. I haven't screwed around with it since I installed rc5. I think I did CM, then the kernel, then the big mem patch. I never was able to figure out how to update the radio. I always ended up with "no voice service" or worse.
There is a thread in the developer forum that has the links to the kernel downloads. I am running one from may 30 and haven't updated.
Click to expand...
Click to collapse
I think I found it... Is didy the same as didhiy?
[KERNEL][CM10.1]Nitest Kernel for Crespo4G/Epic4G Modem with Voodoo Sound&Color
When you say you couldn't update the radio, you just mean the cell service radio, right? Not wifi? I don't have cell service on my Epic, so that wouldn't be a problem for me... just as long as the wifi radio still works
Also, what specifically do you mean by "or worse"?
Steelcitymetal said:
I think I found it... Is didy the same as didhiy?
[KERNEL][CM10.1]Nitest Kernel for Crespo4G/Epic4G Modem with Voodoo Sound&Color
When you say you couldn't update the radio, you just mean the cell service radio, right? Not wifi? I don't have cell service on my Epic, so that wouldn't be a problem for me... just as long as the wifi radio still works
Also, what specifically do you mean by "or worse"?
Click to expand...
Click to collapse
Yeah. That's the one. I looked at my about phone and it said "didy".
I saw a thread about the nexus radio being hot **** and I fooled around with it. I got either "no voice service" or no nuthin. I was able to flash back to the regular epic radio. there is another thread that had all the flashable zips with different modems. luckily the epic one undid my stupidity - at least on my phone.
boocephus said:
Yeah. That's the one. I looked at my about phone and it said "didy".
I saw a thread about the nexus radio being hot **** and I fooled around with it. I got either "no voice service" or no nuthin. I was able to flash back to the regular epic radio. there is another thread that had all the flashable zips with different modems. luckily the epic one undid my stupidity - at least on my phone.
Click to expand...
Click to collapse
Thanks man, I'll give it a shot. CM10.1 is running pretty smoothly on my phone, but it could be better and battery life is not an issue for me.
I'll be sure to run backups before I do though :good:
Thanks
These tips helped - I just made the jump to CM 10.1, and although there are a few quirks it has been great. Your list really helped.
FYI, one thing I ran into was the auto-rotate didn't work. I followed the directions here:
http://epiccm.blogspot.com/2012/01/boot-el30-stock-from-sdcard.html
the first time, there was no change. I tried again (and calibrated like 6 times) and it worked.
Has anyone noticed the physical keyboard doesn't always work the same? In some places, you have to hold down shift or Fn while pressing the key you want (for example - hold shift while pressing A, rather then pressing shift then pressing A). It's not consistent - some inputs work like the keyboard did before. Does anyone have any suggestions how to fix this. Not the worst thing (I'm just glad I still have a physical keyboard), but I would prefer it work the way it did before, or if that's not possible, at least be consistent.
And the smiley face button on the physical keyboard doesn't work either. I mean, it's like 2005 where I have to type out my 's!!
any phantom voicemail fix?
phantom voicemails?
TheSkipperCDB said:
Has anyone noticed the physical keyboard doesn't always work the same? In some places, you have to hold down shift or Fn while pressing the key you want (for example - hold shift while pressing A, rather then pressing shift then pressing A). It's not consistent - some inputs work like the keyboard did before. Does anyone have any suggestions how to fix this. Not the worst thing (I'm just glad I still have a physical keyboard), but I would prefer it work the way it did before, or if that's not possible, at least be consistent.
Click to expand...
Click to collapse
I have noticed that the physical keyboard doesn't work right in the browser. Shift and Fn don't seem to work. I am usually in such a hurry that I just close it up and use the virtual keyboard if I want to have punctuation. It honestly didn't occur to me that it might be fixed. I can't offer that fix. I am just offering emotional support and validation.:good:
boocephus said:
I have noticed that the physical keyboard doesn't work right in the browser. Shift and Fn don't seem to work. I am usually in such a hurry that I just close it up and use the virtual keyboard if I want to have punctuation. It honestly didn't occur to me that it might be fixed. I can't offer that fix. I am just offering emotional support and validation.:good:
Click to expand...
Click to collapse
I noticed that the default browser you have to hold the shift or fn key while pressing the desired key to get it to work. Apps and os seem to work with a tap od these keys and then a hit of the desired key.I recall a while back a thread about the smiley and since it was not a default key the consensus was that they would not be adding the functionality to cm. While on the topic...same goes with the .com function.
Sent from my SPH-D700 using xda app-developers app
I'm sorry i want to ask, how we modify system setting look in CM? Thank you..