Database Users

Can you help me figure out my provlem w/ Phone

Yesterday my phone just went pitch black when i was using it tge only lights on were the back button and the menu one beside the home button. Nothing worked. Power. 3 button both recovery and downloading. So i pulled the plug and took the battery out. When i turned it on i noticed my theme went back to the stock one. All my user data was erased. No apps were installed. Market maps and youtube have an icon on main page but say "application not installed on phone" when i click on it. My camera wont work either it says "Turn off usb storage before using camera" when i go to my gallery/music player/video player/voice recorder it says "SD card unmounted or not present" and when i use My files it says "Your phone does not have an SD card inserted"
Has anyone seen problems like this at all? If so can you tell me how to fix it please cause this phone was hella expensive and all it is right now to me is an expensive phone bill that i cant use features for...

Are you using an external sd card?
Sent from my GT-I9000 using XDA App

I have one but its not in the phone. I took it out a week or two ago.before it happened

Are you familiar with 'Odin' ??
Get your self a firmware and flash it, and see how you get on.
You do have the 3 button combo right ?

Yes my 3button combo works. and i know how to use odin. can you point me into the direction of the latest firmware for bell. cause if i need to return it they will see if its on their firmware and stuff.

When im using odin i get this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is that ok to have the 2 coms? cause everytime ive used odin before it has always had only 1

dont use PIT file unless you have all 3 files...
So remove the PIT and flash and you should be ok. Most firmwares now only come in 1 .tar file so dont worry about it...
If the flash doesnt fix your problem, you will need all 3 files and PIT, but im not familiar with bell firmwares so you may have to do a bit of searching for that one.

This is what i have.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
and its stuck on that. I have the I9000UGJL2.tar file in the phone part but nothing is happening.
Will a hard reset bring it back to factory settings?

I have the I9000UGJL2.tar file in the phone part
Single file its PDA in Odin unless its a modem file .
jje

Ok well ****.... Odin didnt work. so im trying to spoof with kies right now but something very very weird is happening. it says instalising... and it goes like this 1...2...3...4... homescreen for a split second. then instalising... and it goes like this 1...2...3...4... homescreen for a split second. and repeat... is my phone kinda screwed at this point?

ok... well my phone is only showing
the first screen you see when you boot.
Galaxy S GT-1900
Samsung
Is it ****ed for good now?

Gordon_Jeffries said:
ok... well my phone is only showing
the first screen you see when you boot.
Galaxy S GT-1900
Samsung
Is it ****ed for good now?
Click to expand...
Click to collapse
No its not ****ed, dont panic.
Is your download mode still working ??? Do as i said earlier with all 3 Files and PIT.
Then in Odin CHECK RE-PARTITION and when you have all 3 files + PIT loaded i.e PDA, Phone, CSC, connect your phone (in download mode) and flash it.
Make sure you Have all 3 files and make sure they are in the right section. And also make sure the firmware that came in 3 files is supportive of Bell SGS
PIT goes in PIT
PDA goes in PDA
MODEM goes in PHONE
CSC goes in CSC

@Gordon_Jeffries
Please check the followings:
* Use only the original Samsung USB-cable.
* Restart your PC and move the USB cable to another USB-port.
* Without using Odin,put the phone on download mode and connect to your PC, let your PC install the drivers, disconnect when done.
* Start Odin and load the firmware file without a pit file and no re-partition.
* Re-enter download mode, if the phone is still on download mode then you need to hold the three buttons until the phone re-enters download mode, connect to the PC and flash the firmware.
* If the flash goes well then do a wipe/factory reset from recovery.

ok well i can get it to download mode. but i dont have the CSS and or phone. does anyone know what the most current up to date bell firmware is?

it doesnt have to be a new firmware release...
Does Bell not have a single firmware in all 3 files ??
as a last resort you can use darkys resurrection (odin version) That comes in just 1 .tar file and you can use 512PIT with it..
I have used it many times to get me fixed up.... And im sure its compatible with bell (but check first)

Ive tried everything. JL2, JK3, Jk4, JH2, JPY, Darkys resurection. nothing works it just continues never ending boot screen...

Gordon_Jeffries said:
Ive tried everything. JL2, JK3, Jk4, JH2, JPY, Darkys resurection. nothing works it just continues never ending boot screen...
Click to expand...
Click to collapse
Can you enter recovery mode? If you can then do a factory reset, if that does not help and you have a 16GB Internal SD-card, then it's very likely that Internal SD-card of your device is dead.

No i cant enter recovery mode anymore. and yes i have a 16gb internal SD-card.
thats what i was hoping it wasnt... ok well i phoned bell and they said they will bring it in for sercive.

Same problem here
I have the same problem here, but i have a I9000B (Brazil) i just want to take my phone back to normal, can anyone help me?
My actual firmware: 2.3.3 I9000BVJJWW2 (its the offical one, from Kyes)
I'm not familiar with odin, but if u give any tutorial that I can follow, will help alot.
Thanks

tjacobs said:
I have the same problem here, but i have a I9000B (Brazil) i just want to take my phone back to normal, can anyone help me?
My actual firmware: 2.3.3 I9000BVJJWW2 (its the offical one, from Kyes)
I'm not familiar with odin, but if u give any tutorial that I can follow, will help alot.
Thanks
Click to expand...
Click to collapse
What you could do, is go to samfirmware.com, register and search for i9000. Or if you want to download a i9000b rom, press this link: http://hotfile.com/dl/146652827/84f8d47/I9000BVJJV3_I9000BSAMJV2_SAM.zip.html
(password is: samfirmware.com)
Just use odin to flash.
Or: http://forum.xda-developers.com/showthread.php?t=1102881&highlight=+guide+odin
(PS, search is your friend )

Urgent! Phone has no cwm

Alright, posting behalf of my friend, his sgs is currently running on cm7 #98
first of all, his cwm is missing, which means, he cannot enter recovery. secondly, I'm unable to push adb into his phone, therefore, I cannot use Odin... help needed. thanks
Sent from my Optimus 2X using XDA Premium App

Bumps~ HELP~

Try pulling the battery down for a couple of minutes and then try again with odin...Somewhere i read that is almost impossible to brick sgs...

Can you get into Download mode?

Edit: Meh, posted in the wrong thread, sorry

faria said:
Can you get into Download mode?
Click to expand...
Click to collapse
Download mode, flash new kernel.

If the three button mode is creamed then you need a jig or try downloading the free one of the market it may repair the old one

Can't get it into download mode too.. When i hold down 3 button, the sgs logo popout followed by the logo with cm7. Tried "adb reboot download" thingy, but same result appear.
Did remove battery for couple if minute, and reinsert it, but no valid.
Erm, whats a jig? I did some research, its a 301k resistor plug thingy? Its guarantee to work? Any idea where i can buy it?
Thanks all
Sent from my Optimus 2X using XDA Premium App

Download sgs kernel flasher from market. Download a suitable kernel, flash it with sgs kernel flasher.
Thank neldar for his great app
Sent from my GT-I9000 using XDA App

imparator said:
Download sgs kernel flasher from market. Download a suitable kernel, flash it with sgs kernel flasher.
Thank neldar for his great app
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Will give it a shot now. Thanks
Edit: I got this error.. See attachment.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

xxdoggyxx said:
Will give it a shot now. Thanks
Edit: I got this error.. See attachment.
Click to expand...
Click to collapse
I should have figured.
Pull your battery put it back.
Insert usb cable in your pc.
Press and hold home+vol-down.
Attach your phone:see if it works(make shure you dont get RSI)

imparator said:
I should have figured.
Pull your battery put it back.
Insert usb cable in your pc.
Press and hold home+vol-down.
Attach your phone:see if it works(make shure you dont get RSI)
Click to expand...
Click to collapse
Hmm. Shall try it later in de afternoon.. Whats rsi??
Cheers
Sent from my Optimus 2X using XDA Premium App

xxdoggyxx said:
Will give it a shot now. Thanks
Edit: I got this error.. See attachment.
Click to expand...
Click to collapse
Download "System Toolbox" from the market.
It allows you to reboot into download or recovery mode...
Sent from my GT-I9000 using xda premium

imparator said:
I should have figured.
Pull your battery put it back.
Insert usb cable in your pc.
Press and hold home+vol-down.
Attach your phone:see if it works(make shure you dont get RSI)
Click to expand...
Click to collapse
Nope, does't works. Thanks anyway
ccrows said:
Download "System Toolbox" from the market.
It allows you to reboot into download or recovery mode...
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I manage to get into recovery now... What to do next? Flash new ROM? Any to recommend?
Edit: Then, i installed CM7 #102.. However, the process is kind of fast. is it normal? After it says, checking DML/BMC? (Something like that, Can't Remember) And it says: Install update complete. SGS Kernel flasher still can't work, Still unable to go into download mode...
Just a question.. if i can't put this phone into download mode via, "Adb reboot download", will the USB JIG still work??
Cheers

Ok, I have ordered a USB JIG from eBay, and i was just wondering, Does it works? Because, I already tried to put the SGS into download mode via ADB, but this thing just happen to me. Tried also, to plug out battery, hold down both vol buttom, Blah blah blah...
Take a look at this video: Does de USB JIG still works?
http://www.youtube.com/watch?v=zZ7ZfKfw4O4

xxdoggyxx said:
Ok, I have ordered a USB JIG from eBay, and i was just wondering, Does it works? Because, I already tried to put the SGS into download mode via ADB, but this thing just happen to me. Tried also, to plug out battery, hold down both vol buttom, Blah blah blah...
Take a look at this video: Does de USB JIG still works?
http://www.youtube.com/watch?v=zZ7ZfKfw4O4
Click to expand...
Click to collapse
The usb jig will only get you into "Download" mode, then flash a unmodified rom with odin.
ps,
got a jig myself.

faria said:
The usb jig will only get you into "Download" mode, then flash a unmodified rom with odin.
ps,
got a jig myself.
Click to expand...
Click to collapse
Yup yup, i know. gonna put it back to stock.. And, seeing the situation above, the usb jig will work huh??
thanks
Sent from my Optimus 2X using XDA Premium App

xxdoggyxx said:
Nope, does't works. Thanks anyway
I manage to get into recovery now... What to do next? Flash new ROM? Any to recommend?
Edit: Then, i installed CM7 #102.. However, the process is kind of fast. is it normal? After it says, checking DML/BMC? (Something like that, Can't Remember) And it says: Install update complete. SGS Kernel flasher still can't work, Still unable to go into download mode...
Just a question.. if i can't put this phone into download mode via, "Adb reboot download", will the USB JIG still work??
Cheers
Click to expand...
Click to collapse
Use the "system toolbox" app from the market like I recommended earlier, and you can reboot your phone into download mode. Then you're all good...
Sent from my GT-I9000 using xda premium

ccrows said:
Use the "system toolbox" app from the market like I recommended earlier, and you can reboot your phone into download mode. Then you're all good...
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Can't.. As in, it doesn't work. The situation happen de same as video i uploaded. It shows sgs logo, then, blink for a sec, and boot up normally..
Sent from my Optimus 2X using XDA Premium App

I just bricked mine while flashing a full rom!
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> Complete(Write) operation failed.
As you can see it failed at boot.bin , that means i no longer can get into download mode via the 3 buttons.
Luckily a made a jig sometime ago, up and running again ,otherwise it would be another trip to samsung.
this things are quite easy to klill.

Repair your I9100G Samsung Galaxy S2 which has been flashed with wrong firmware

Hi Guys,
I've bought a GT-I9100G, flashed it with an original I9100 rom and the phone was bricked by the wrong firmware. After that, I couldn't flash it with the right firmware neither.
I have spent a whole day to figure out the problem and I have found a guy, who had the same problem earlier.
He told me what to do:
Warning! Use this description at your own risk! I can't guarantee that your phone will be alright. If you are brave, just give it a shot.
1. Download the required files:
-In case of the blocked file servers, the pit has been uploaded to a reliable Hungarian site-
Odin 1.85:
Odin 1.85
TI OMAP 4 .PIT FILE:
PIT for I9100G Samsung Galaxy S 2 II
HOW TO DOWNLOAD FROM DATA.HU:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The stock ROM:
Go to http://www.sammobile.com/ and find a rom for your device (rembember, you have to look for I9100G firmwares not for I9100 ones)
2. Repartition with Odin
Turn off your phone and remove the battery.
Put it back and Press these buttons in this order:
Volume Down + Home (Menu) + Power Button
After that, you will see this:
Now, press the Volume Up button.
Your phone is in Download Mode now.
Connect your phone in this mode to your PC. It will install a few drivers, just wait patiently.
After the installation, you have to see this:
Now, browse the downloaded .PIT file to its place.
Check the re-partition box and press START.
When it finished, detach your phone.
3. Flash the new Firmware
Browse the downloaded firmware to the PDA section in Odin.
DO NOT CHECK THE RE-PARTITON BOX THIS TIME!
Hit the flash button and wait patiently.
When it finishes just enjoy your SGS II!
If you don't understand something, just ask in the thread or send me a private message.
I'll write some keywords here, so Google can find this thread easier:
I9100G flashed with I9100 firmware, bad flashing, bad flashed I9100G, bricked I9100G, dead I9100G, I9100G PIT, .PIT, *.PIT, pit file

To be deleted

chadouming said:
1st - If you did not created it, it does not belong to original development.
2nd - If you can do something without jtag, it neither dead or bricked.
Still good to post it, but next time pay attention to post in the right section plz.
Click to expand...
Click to collapse
Well, I've made a mistake here. I'm sorry :-(
Could you tell me how should I name the topic and how can I move it to it's place?

To be deleted

Thank you for your help and I hope this thread will help somebody.

did u recover ur phone from this bad flash? By the way what was the exact process?
1) u flashed the pit file fter chking the repartition option in odia
2) flashed a stock rom of i9100g
and all working?

manishdev said:
did u recover ur phone from this bad flash? By the way what was the exact process?
1) u flashed the pit file fter chking the repartition option in odia
2) flashed a stock rom of i9100g
and all working?
Click to expand...
Click to collapse
Yes, exactly.
First of all, make a repartition with Odin. Check the Re-partition box and browse the PIT file.
Click on the START button.
After it finishes, browse the rom file to the PDA section, and click START again.
This method worked on my phone.

Good one, hope I don't have to use it

Hi! suffering from same probelm. My phone doesnt go into boot mode and a yellow triangle keeps flashing. How could i use the PIT file? any step by step guide available?
Thanks!

I have made a more accurate process description.

Hello,
I once had the same problem and wasn't able to go to the download mode, I had the image of a PC and a phone on my screen and when removing the battery the phone goes off, and when I put it again and turn it on, automatically I found my self on the same screen without being able to do anything. I had no choice but send my phone to be repaired !

Archive PIT
I have read in forums that the android Archiving PIT would not be necessary, is this true?

Rats, thanks to hotfile being made entirely out of fail and megaupload being seized by the feds this guide is of no use to me as I cannot get hold of any of the files needed to repair my phone.

tba77 said:
Hello,
I once had the same problem and wasn't able to go to the download mode, I had the image of a PC and a phone on my screen and when removing the battery the phone goes off, and when I put it again and turn it on, automatically I found my self on the same screen without being able to do anything. I had no choice but send my phone to be repaired !
Click to expand...
Click to collapse
That's download mode... It's "forced download mode" - phone is telling you that you HAVE to flash something in Odin or you're not going anywhere.
Sent from my GT-P7510 using Tapatalk

what about flashing wrong kernel? What should i do? I've flashed the i9100 kernel, mine is i9100G

I've made it too, but it's not a problem. If you have download mode you can do everything.
Just follow the steps in the first post.
To the others:
All of the files have been uploaded again. Please contact me if something goes wrong with them.
Good luck and have fun!

Thanks a lot for this post.. was great help to me...
However for those who can't get to download mode using the VOLUME DOWN + HOME + POWER KEY combination, this worked for me..
Disconnect your phone from usb cable
Remove the battery and place it back again
Press the VOLUME UP + VOLUME DOWN KEYS SIMULTANEOUSLY and without releasing them,
Insert your USB cable...
if it shows a phone connected to a PC with a yellow triangle between, and ODIN recognises it, you are good to go.
Just proceed with the instructions from ToMmY_hun
That is how I fixed my SAMSUNG GT I9100G.

this post helped me out so much big big thanks

rootpower said:
I have read in forums that the android Archiving PIT would not be necessary, is this true?
Click to expand...
Click to collapse
The PIT is useful in order to clean deeply your device, so if you have lag, brik or freezing the PIT guarantees a better functioning of the system.
If you don't have any problem, you can avoid the PIT and simply flash the rom

Amazon.de ships 9100G !
Hi,
I just had the same problem. Today my new SGS2 arrived from Amazon.de
I flashed a LA2 based I9100 Firmware (CF-Root-SGS2_XI_ITV_LA2-v5.0-CWM5)
I flashed only the PDA Part in Odin without any other changes in Odin, thinking that I can boot afterwards in CWM and install a CustomRom.
My phone was stuck at the Galaxy S II Bootscreen with the yellow triangle.
Afterwards - I know, a little too late - I realized that my retailer sent me a I9100G (with a german LA1 2.3.6 Firmware) instead of a I9100!
So I downloaded an original 9100G Firmware from sammobile.com. Unfortunately there are no european firmwares available for the 9100G, so I had to use the only 2.3.6 Firmware I found I9100GJPKK1 (United Arab Emirates).
I started Odin, didn't change any of the checkboxes and flashed it (only PDA). Everythin is working right now but I want to exchange it with a 9100.
I'm not sure if I can return the Handset to the retailer. It was his fault that he messed up the phone models but now I have a mobile with arab emirates firmware that does not support german.
Hope my little journey helps somebody...

[REF] Galaxy Y-GT-S5360 Stuck at BOOTLOGO

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCUSSION AND TIPS WHEN STUCK AT BOOTLOGO..
SOME RECOVERY HAS DONE IN THIS POST BY OUR GREAT MEMBERS IN XDA :highfive:
JUST SEARCH AND REFER BACK ALL POST CAREFULLY.. :crying:
BE PATIENT :good:

when you come in downloadmode volume down,homebutton,power,then try firmwareflash with odin.

which repencis rom you are talking about odinable or flashable
which one????
..............
try to wipe data and cache
if it not work then do it:::::----
reinstall rom......

fix
dzolcp said:
Pls anyone can help me? im from brazzor rom and then i flash Repencis rom and i get stuck on Samsung Galaxy Y start up..i try combo home+vol up+on button and i cannot enter a recovery..what should i do?? can anyone help me pls ASAP
Click to expand...
Click to collapse
1. Get into Download Mode
(WITH THE PHONE PLUGGED
IN) by following the steps
below
*Turn off the phone until you
get to the charging battery
screen (keep in mind, your
phone is currently PLUGGED IN)
*Press volume up and down,
and power all at once.
*As soon as the screen turns
black, release your power
button.
2. Unplug phone from USB
u have fixed ur phone..
but..
flash stock rom using pc with odin as now u have no rom in ur phone...flashing instructions: http://galaxyydroid.wordpress.com/2012/06/12/flaahing-stock-rom-via-odin-on-galaxy-y-india-firmware/ follow all the steps correctly and dont forget to press thanks
n sorry if posting links like dis are not allowed

find here your Odin files and start-good luck !!!
http://forum.xda-developers.com/showthread.php?t=1465800

sOLUTION IS HERE (NOT SURE)
TRY TO INSTALL THE STOCK ROM OF GALAXY Y IT MAY WORK OR GO TO A HELP CENTRE:good:

Thank you so much guys for helping me,,im done flashing to stock rom GB 2.3.6 and i root/flash Repencis Rom v3.5 and it works great :good:

HELP ME
dzolcp said:
Pls anyone can help me? im from brazzor rom and then i flash Repencis rom and i get stuck on Samsung Galaxy Y start up..i try combo home+vol up+on button and i cannot enter a recovery..what should i do?? can anyone help me pls ASAP
Click to expand...
Click to collapse
My Galaxy Y got even worst after flashing
[ROM] [Custom] Flash-Navie ROM - (Thunder-Desert v2) - DXLE1, my gal stuck on first screen "samsung galaxy y young GT-S5360" LOGO and I can't enter to recovery mode even I' ve been tried combo and many instruction above my gal still stuck in first screen logo only and when I tried to power off the phone automatically turn on again.....it means my gal won turn off at all except I remove the battery ..... I want to flash it with odin but I can't do the step you offer to solve. ....please help me

just use odin ,sir

dimasrafi said:
My Galaxy Y got even worst after flashing
[ROM] [Custom] Flash-Navie ROM - (Thunder-Desert v2) - DXLE1, my gal stuck on first screen "samsung galaxy y young GT-S5360" LOGO and I can't enter to recovery mode even I' ve been tried combo and many instruction above my gal still stuck in first screen logo only and when I tried to power off the phone automatically turn on again.....it means my gal won turn off at all except I remove the battery ..... I want to flash it with odin but I can't do the step you offer to solve. ....please help me
Click to expand...
Click to collapse
You need to goto ODIN mode.
After inserting the battery try to turn on the device like this, Volume DOWN + Middle (Home) Button + Power button.
You'll see Primary ODIN screen then press Volume UP to continue to ODIN mode.
After that open Odin on your PC and connect your phone.
Then flash it via ODIN stock ROM version.
Good luck.
© Sent from Samsung Galaxy~Y
Click "Thanks" if this post is "Useful/Helpful" to you.

arindam4u said:
You need to goto ODIN mode.
After inserting the battery try to turn on the device like this, Volume DOWN + Middle (Home) Button + Power button.
You'll see Primary ODIN screen then press Volume UP to continue to ODIN mode.
After that open Odin on your PC and connect your phone.
Then flash it via ODIN stock ROM version.
Good luck.
© Sent from Samsung Galaxy~Y
Click to expand...
Click to collapse
Thank you guys my Gal work fine now, I can't have it without your help.....:good::laugh:

flash stock rom via odin(download mode)
and when you flash cook rom via CWM, do wipe data+cache before flash that rom
Sent from my GT-S5360 using xda premium

dimasrafi said:
Thank you guys my Gal work fine now, I can't have it without your help.....:good::laugh:
Click to expand...
Click to collapse
Glad to know that...
Enjoy!
© Sent from Samsung Galaxy~Y
Click "Thanks" if this post is "Useful/Helpful" to you.

PRESS THANK IF THIS THREAD HELPS
STARTED BY ME..STUCKIN BOOTLOOP..HE HE HE :laugh:

my gal y stuck at boot screen after flashing flash navie rom!
it even cant enter recovery !
it gets to download mode bt my pc dont recognise it!
i have also installed kies for drivers bt still it says ur hardware not installed!
n ya my galaxy mini get recognised by same odin n kies!
so no problem fro drivers thts all i can say!
plsss help!

Have u remove memory card and ur sim before plug in to odin?
Check also if there are other removable devices such as printer scanner or usb, it should be the only device (sgy) attached on ur pc.
Sent from my GT-S5360 using xda premium

hey im having the same problem nd i tried to use odin nd followed ur steps..
bt its nt working.. :crying::crying:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Send lock information..
it has stopped on this from around 2 hrs... wat to do pls help me... :crying:

Change usb ports
Sent from my GT-S5360 using xda premium

kreako28 said:
Change usb ports
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
no.. not working...

Make sure that you put a right file in Odin,,otherwise the flashing process can't be done,

[Q] Phone is soft bricked - but I can't get it to work

Hello,
My Samsung Galaxy S4 GT-I9505 got soft-bricked after I've accidentally tried to downgrade from 4.3 to 4.2.2. The reason was, my wifi didn't work after updating to 4.3 and I couldn't get it to work.
However, now I only get the following error: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." After Ive been googling for a solution 2 hours now and didn't find any answers, I decided to post my problem here.
I am able to get into download mode, but not into recovery. Some people in forums said you have to re-flash your firmware then factory reset it; but I've tried flashing the 4.2.2 and 4.3 DBT firmware for my S4 several times, but Odin says "Fail!" everytime. Some others said just connect it to Kies and do a emergency recovery. But Kies doesn't recognize my phone. It's "connecting..." for like 10-15 minutes and then gives me a connection error (but this isn't caused by the upgrade issue; I've tried other cables, other USB ports, reinstalling Kies and even the phone so often).
Now I don't know what to do. I can't reset with Kies because it doesn't recognize my phone and Odin gives me "Fail!".
Please help, I'm so desperate right now.
I will try emergency restoring on the weekend with another computer, but what can I do if that won't work either?

1. Install Kies3 (with new android 4.3 u need new drivers) -> HERE
2. Install Odin 3.09 -> HERE
3. This firmware is the good for ya, latest one for O2 Germany -> HERE
4. Put ur phone in Download Mode (Vol down+Power button at same time)
5. Select Vol Up then
6. Open Odin with ur PC
7. Plug in your phone to the PC with USB conector
8. Unzip the file of the step 3 in ur PC and inside will be a .tar file
9. Click the button AP in Odin and select the .tar file and Click in Start button
10. Wait till finish
11. Enjoy

Thanks so far!
Joku1981 said:
3. This firmware is the good for ya, latest one for O2 Germany -> HERE
Click to expand...
Click to collapse
Hmm.. :/
But I have already downloaded a firmware (I9505XXUEMJ5, if that helps you..), will this work too?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

AaronAverage said:
Thanks so far!
Hmm.. :/
But I have already downloaded a firmware (I9505XXUEMJ5, if that helps you..), will this work too?
Click to expand...
Click to collapse
The one I pasted u for download go better, u will have the latest version for ur phone directly and is compatible with Kies3 too. Try again the link (TERAFILE sometime fails )

Joku1981 said:
The one I pasted u for download go better, u will have the latest version for ur phone directly and is compatible with Kies3 too. Try again the link (TERAFILE sometime fails )
Click to expand...
Click to collapse
Okay
Hope my wifi will work then anyways..
If you have a uploaded.to link available, please let me know, the download from Terafile takes 5 hours and I have a premium account at uploaded. Thanks to you anyways, Im gonna try and answer then

AaronAverage said:
Okay
Hope my wifi will work then anyways..
If you have a uploaded.to link available, please let me know, the download from Terafile takes 5 hours and I have a premium account at uploaded. Thanks to you anyways, Im gonna try and answer then
Click to expand...
Click to collapse
Im sorry if it is slow but this firmware is only there now (no in uploaded.to)
EDIT: When u finish the installation process and if u still without WIFI, we can solve it here in same thread. Good luck and if I helped u pls click in THANKS button :fingers-crossed:

Joku1981 said:
1. Install Kies3 (with new android 4.3 u need new drivers) -> HERE
2. Install Odin 3.09 -> HERE
3. This firmware is the good for ya, latest one for O2 Germany -> HERE
4. Put ur phone in Download Mode (Vol down+Power button at same time)
5. Select Vol Up then
6. Open Odin with ur PC
7. Plug in your phone to the PC with USB conector
8. Unzip the file of the step 3 in ur PC and inside will be a .tar file
9. Click the button AP in Odin and select the .tar file and Click in Start button
10. Wait till finish
11. Enjoy
Click to expand...
Click to collapse
Oh my god, it worked, thank you! you just saved my phones life :highfive:
It's working properly now (even the wifi)
You definately deserve something to thank you, Ive hit the donate button because Im so thankful

Joku1981 said:
1. Install Kies3 (with new android 4.3 u need new drivers) -> HERE
2. Install Odin 3.09 -> HERE
3. This firmware is the good for ya, latest one for O2 Germany -> HERE
4. Put ur phone in Download Mode (Vol down+Power button at same time)
5. Select Vol Up then
6. Open Odin with ur PC
7. Plug in your phone to the PC with USB conector
8. Unzip the file of the step 3 in ur PC and inside will be a .tar file
9. Click the button AP in Odin and select the .tar file and Click in Start button
10. Wait till finish
11. Enjoy
Click to expand...
Click to collapse
Hello Joku,
I have exactly the same problem. Two questions:
Why do we need to install Kies3 if Odin sees the phone anyway?
The firmware in step 3, is it Android 4.3?
Thank you.