Database Users

[Q] Reboot Button problem

OK, I'd appreciate some help here. I Just downloaded Zenmaster's Reboot button app. I probably made a mistake by going to ROM manager and its install from SD card option.
The install started out fine, but just stalled at installing update. Left it there for 30 minutes.
I did a battery pull and the phone went into recovery except it says at the bottom of the screen:
E: Can't mount /dev/block/mmcblk01p1
(Invalid Arguement)
#MANUAL MODE#
The upper screen has the typical
reboot system now
Apply sdcard...
wipe data/factory reset
wipe cache partition
Nothing happens with either reboot system now or apply from sdcard
So I really would appreciate...what now.

Are you rooted? Do you have Clockwork Recovery installed?
Are you hitting the "Home" soft button key on the Reboot option? That's the "Enter" key for the stock recovery screen, not the Power button like it is for Clockwork.
-Div

Diversion said:
Are you rooted? Do you have Clockwork Recovery installed?
Are you hitting the "Home" soft button key on the Reboot option? That's the "Enter" key for the stock recovery screen, not the Power button like it is for Clockwork.
-Div
Click to expand...
Click to collapse
Thanks for your response.
Yes I'm rooted and yes I have CWM.
This is embarrassing now, because I WAS NOT hitting the home button, which I should have known to do, but obviously forgot. Did that and I'm back up. Old Droid habits die hard I guess.
My apologies for using up bandwidth and thank you again.

SteveC485 said:
Thanks for your response.
Yes I'm rooted and yes I have CWM.
This is embarrassing now, because I WAS NOT hitting the home button, which I should have known to do, but obviously forgot. Did that and I'm back up.
My apologizes for using up bandwidth and thank you again.
Click to expand...
Click to collapse
That's okay, I believe I freaked out the first time I was in stock recovery as well not getting any response from the power button

SteveC485 said:
OK, I'd appreciate some help here. I Just downloaded Zenmaster's Reboot button app. I probably made a mistake by going to ROM manager and its install from SD card option.
Click to expand...
Click to collapse
Yeah, that's not gonna work. The app is a .apk file, which gets installed via adb or Root Manager/Astro. It's not a flashable zip.
It's also now available on the market .

Zennmaster said:
It's also now available on the market .
Click to expand...
Click to collapse
Bonus. That is fantastic news.

Well naming the .zip to .apk worked and Reboot Button worked. Sort of. I think what happened here was no fault of the app, but something related to the relationship between my phone and voodoo. I had never seen any particular problem on my phone, but I just wanted a way to disable the thing as I was contemplating flashing jt's ROM.
Well the disabling of voodo lost root on my phone. I use Launcher Pro and that was gone too. So I tried reinstalling that and entered a force close loop from hell. After installing the LP, the phone regressed to the same opening screen it had when out of the box, different from the static wallpaper I had.
There is a thread on this here:
http://forum.androidcentral.com/fascinate-roms-hacks/38029-how-escape-force-close-loop-hell.html
I followed that and got back to the out of the box Fascinate state. Only part of my apps, and not all of the paid ones showed up in Market, even after an overnight wait. The significant missing one is Documents to Go.
There was 0.00 space left on internal memory, so I did a factory reset.
This would not be a big deal, BUT the phone will not root, so I can't use Titanium Backup to restore stuff. The Samsung Drivers are installed, the USB cable is the one that came with the phone, and the computer recognizes the device. However, Odin seems to think the device is not connected.
So, I'm not sure what is going on with this phone of mine. Again, I don't think it is the app.
Edit; All is back to normal

Power Amp "Too many failed files" Final, Permanent FIX!

If there is another method out, please forgive me. I have tried many and this is the only one to work for me.
1. Backup all data and apps with TI Backup!
2. Reboot into CWM
3. Backup your rom with CWM for the love of god!
4. Wipe data/Factory reset 3 times
5. Wipe cache 3 times
6. Wipe dalvik cache 3 times
7. Install a fresh ROM and DO NOT RESTORE DATA!!!
8. Boot into freshly installed rom and use TI Backup to batch restore everything you hold dear to you exept for Power Amp.
9. Restore Power Amp "APP ONLY" / Or install fresh copy
You will now notice that you can change songs as much as you want for as long as you want and no more errors!!!!
I hope this helps some of you out as it did for me. This also should work for any galaxy s phones as we seem to be the ones maily affected.

biggnasty989 said:
If there is another method out, please forgive me. I have tried many and this is the only one to work for me.
1. Backup all data and apps with TI Backup!
2. Reboot into CWM
3. Backup your rom with CWM for the love of god!
4. Wipe data/Factory reset 3 times
5. Wipe cache 3 times
6. Wipe dalvik cache 3 times
7. Install a fresh ROM and DO NOT RESTORE DATA!!!
8. Boot into freshly installed rom and use TI Backup to batch restore everything you hold dear to you exept for Power Amp.
9. Restore Power Amp "APP ONLY" / Or install fresh copy
You will now notice that you can change songs as much as you want for as long as you want and no more errors!!!!
I hope this helps some of you out as it did for me. This also should work for any galaxy s phones as we seem to be the ones maily affected.
Click to expand...
Click to collapse
wow. All that just to get powerAMP working properly? Why not just use playerPRO

What is this in relation to? Is there a rom or mod that breaks it? I have been using it for about 8 months and have never had a problem. I am mostly stock with a theme, volume rocker and tws fix.
Sent from my SPH-D700 using XDA Premium App

crawrj said:
What is this in relation to? Is there a rom or mod that breaks it? I have been using it for about 8 months and have never had a problem. I am mostly stock with a theme, volume rocker and tws fix.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
When you install a new rom and just "restore data" from CWM it somehow messes with the way power amp reads files and sees too many blank spaces or something in between songs.
Dont forget to export your contacts too, since you wont be restoring data! this is the best advice I can give. I know its a pain in the ass but all my friends with Epics, and even a fascinate bro, have done this and are now totally enjoying power amp without probs.

Ive had this issue a few times and decided to search about it... This is what I found to work without loading any data, well other than power amp settings... simply go to settings>applications>manage applications>poweramp the select clear data. Worked fine for me. i got the poweramp error, went to clear data, went back to poweramp and started listening to music.... just thought id chime in with a easier route

puff601 said:
Ive had this issue a few times and decided to search about it... This is what I found to work without loading any data, well other than power amp settings... simply go to settings>applications>manage applications>poweramp the select clear data. Worked fine for me. i got the poweramp error, went to clear data, went back to poweramp and started listening to music.... just thought id chime in with a easier route
Click to expand...
Click to collapse
This worked for me too, SO MUCH EASIER.
Thanks

biggnasty989 said:
When you install a new rom and just "restore data" from CWM it somehow messes with the way power amp reads files and sees too many blank spaces or something in between songs.
Dont forget to export your contacts too, since you wont be restoring data! this is the best advice I can give. I know its a pain in the ass but all my friends with Epics, and even a fascinate bro, have done this and are now totally enjoying power amp without probs.
Click to expand...
Click to collapse
Power Amp is nice but retarded haha. i never had this issue the only problem i get is this license isn't valid but it is too and it was working for the past month now all of sudden you don't work, but even though the message appears i can still play music and use the app.

MYTOUCH 4G HELP PROBLEM PHONE NOT STARTINGUP/LOADING COMPLETElY

Hi i have a MyTouch 4G rooted with Virtuous Fusion ROM. Everything was working until when I tried to install Miui Music Player on it. I did adb push but after doing it when i unplugged the phone from my computer several Force Close came up then i rebooted my phone then the MYTOUCH Tmobile logo start up screen came then the HTC logo came then my phone will shut down. I tried to start my phone again the same thing happen. I did Hboot and tried recovery from there but it didnt work. I tried Factory Reset but it failed. I go to clockwork recovery mode if i do backup and restore or factory reset nothing happens. Does it mean my phone is gone? Is there anything i can do to fix it? Please anybody help Does this mean my phone i bricked

XDA Forum Rules said:
5. Post a message only once.
As a large forum we don't need unnecessary clutter, You're free to edit your message as you like, so if you do not receive an answer revisit your message and see if you can describe your problem better. Not everyone is online at the same time, it might take a while before you receive an answer
Click to expand...
Click to collapse
Double posting is a big no no.
http://forum.xda-developers.com/showthread.php?p=14051045

oh ok sorry i did not know

pching999 said:
oh ok sorry i did not know
Click to expand...
Click to collapse
Are you getting any cache errors in recovery mode?

TeeJay3800 said:
Are you getting any cache errors in recovery mode?
Click to expand...
Click to collapse
Since my phone doesn't start or load completely. I do the Hboot then i click the recovery so i will boot to clockwork recovery. In clockwork recovery any option i choose from the menu there is nothing happening clockwork is not responding. Im stuck at the menu. Do you have any ideas what can i do to make it work?

pching999 said:
Since my phone doesn't start or load completely. I do the Hboot then i click the recovery so i will boot to clockwork recovery. In clockwork recovery any option i choose from the menu there is nothing happening clockwork is not responding. Im stuck at the menu. Do you have any ideas what can i do to make it work?
Click to expand...
Click to collapse
I don't get any cache errors

pching999 said:
Since my phone doesn't start or load completely. I do the Hboot then i click the recovery so i will boot to clockwork recovery. In clockwork recovery any option i choose from the menu there is nothing happening clockwork is not responding. Im stuck at the menu. Do you have any ideas what can i do to make it work?
Click to expand...
Click to collapse
Are you clicking the trackpad to make the selection? I ask because some people have tried using other buttons to select and then thought their phone was bricked.

Are you using the trackball to make selections in clockwork?

TeeJay3800 said:
Are you clicking the trackpad to make the selection? I ask because some people have tried using other buttons to select and then thought their phone was bricked.
Click to expand...
Click to collapse
no i click the power button to make selection and the volume bar to move up and down

pching999 said:
no i click the power button to make selection and the volume bar to move up and down
Click to expand...
Click to collapse
Try clicking the trackpad...

TeeJay3800 said:
Try clicking the trackpad...
Click to expand...
Click to collapse
9:43 and 9:44 same posted solution. lol, I think we may be on the same page TeeJay

lowandbehold said:
9:43 and 9:44 same posted solution. lol, I think we may be on the same page TeeJay
Click to expand...
Click to collapse
Great minds think alike. Hopefully that was his only problem. I have to say though, there's something pretty funny about someone thinking their phone is bricked because they're using the wrong button to make selections in recovery! I'm not making fun of anyone, but it does make my chuckle a little.

TeeJay3800 said:
Try clicking the trackpad...
Click to expand...
Click to collapse
I clicked the track pad it worked thanks. However what should i do next to fix my problem. Do i need to do back up and restore let me know know what to do next

pching999 said:
I clicked the track pad it worked thanks. However what should i do next to fix my problem. Do i need to do back up and restore let me know know what to do next
Click to expand...
Click to collapse
If the ROM still won't boot, I would wipe data, cache, and Dalvik-Cache, and then flash the ROM again (assuming the zip is still on your SD).

TeeJay3800 said:
If the ROM still won't boot, I would wipe data, cache, and Dalvik-Cache, and then flash the ROM again (assuming the zip is still on your SD).
Click to expand...
Click to collapse
do i have to wipe them three times

pching999 said:
do i have to wipe them three times
Click to expand...
Click to collapse
Wipe each item once. I think the new recoveries wipe everything when you select 'data', but do the other items just to be sure. Dalvik-Cache is under the Advanced section.

Thanks a lot. My phone working now!
TeeJay3800 said:
Wipe each item once. I think the new recoveries wipe everything when you select 'data', but do the other items just to be sure. Dalvik-Cache is under the Advanced section.
Click to expand...
Click to collapse
Hi thanks a lot for your help. Your Track pad solution is golden. My phone is working now. Take care and keep helping people

Glad I could help.

Haha I feel for you OP I had this problem at first (came from an EVO didn't have a trackpad) so I was confused. Didn't take much before I realized it was the trackpad inside. My new problem is my trackpad broke lol. So now I can't select anything (in the OS or in the Recovery) somehow I got the power button to work one time while I was in recovery (little white writing even came up like it does when you flash a rom that said "power button select enabled") never got this to happen again though, any ideas?

dcwiker05 said:
Haha I feel for you OP I had this problem at first (came from an EVO didn't have a trackpad) so I was confused. Didn't take much before I realized it was the trackpad inside. My new problem is my trackpad broke lol. So now I can't select anything (in the OS or in the Recovery) somehow I got the power button to work one time while I was in recovery (little white writing even came up like it does when you flash a rom that said "power button select enabled") never got this to happen again though, any ideas?
Click to expand...
Click to collapse
ask teejay3800 the one who helped me may be he can answer your question?

[Q] Phone Constantly Locks - Which Service is Responsible?

I used Titanium Backup to uninstall certain packages (not before backing them up, of course) and it seems that I uninstalled too much... Whenever I start certain applications, the phone immediately blanks - and locks.
I have to press the power button 1-2 times before the screen unlock allows me to seep my finger. And it doesn't always succeed in retaining the screen: too often, it will immediately blank and lock again.
Example of applications that make the phone lock: Titanium Backup.
Example of applications that don't blank the phone: Dialer.
I started restoring some of the packages I uninstalled yesterday with the hope that this will fix the problem. So far I tried restoring:
- hiddenmenus
- sns
- Dialer 2.2.2
-setup wizard
- syncMLsvc
But without much success yet.
Any idea which service or package are responsible for correct behavior of the phone?
UPDATE 2: I gave up and decided to flash the EC07-Nuckin-1 ROM. I repeated the entire procedure detailed here and the phone boots fine, but the problem persists - in addition to the fact that the soft menu buttons now disappeared (replaced by faint color dots - LED-like).
How could this happen? Is it possible that my phone contracted an Android virus? (it appears that the problem started immediately after installing Stay Awake from the Android Market.

OK, this is becoming insane: I did a factory reset, re-installed ec07-clean, and not only the problem persists, the settings, home, back and search buttons no longer work!
Not to mention that my account details (and everything else) are still there, even after the factory reset...
And Market won't even start.
How is this possible?
What do I do to simply start from scratch, wiping out everything and all history (except for the SD card)?

verizonless said:
OK, this is becoming insane: I did a factory reset, re-installed ec07-clean, and not only the problem persists, the settings, home, back and search buttons no longer work!
Not to mention that my account details (and everything else) are still there, even after the factory reset...
How is this possible?
What do I do to simply start from scratch, wiping out everything and all history (except for the SD card)?
Click to expand...
Click to collapse
those softkey mod (led dots) are in the rom, look at what ur downloading/flashing first.
did u clear caches/dalvik??? clear them before u flash ec07clean and after and see buddy.

ciscogee said:
did u clear caches/dalvik??? clear them before u flash ec07clean
Click to expand...
Click to collapse
Of course I did.
ciscogee said:
and after
Click to expand...
Click to collapse
After, too? I didn't know that.
ciscogee said:
and see buddy.
Click to expand...
Click to collapse
Who is buddy?
ciscogee said:
those softkey mod (led dots) are in the rom, look at what ur downloading/flashing first.
Click to expand...
Click to collapse
OK, but they don't respond. Even with your ec07-clean.
Is there a way to do a real factory reset? Start all over again? This problem is driving me nuts.
Thank you ciscogee, you life saver.

Ur buddy lol.
I'm out and about right now. In joshkoss rom thread there is a dl17 stock rom. If u flollow that second post I believe u will achieve 2. 1 stock as in out the box and flash up from there
Sent from my SCH-I400 using xda premium

ciscogee said:
I'm out and about right now. In joshkoss rom thread there is a dl17 stock rom. If u flollow that second post I believe u will achieve 2. 1 stock as in out the box and flash up from there
Click to expand...
Click to collapse
I'm not really interested in 2.1. I just don't understand why a total re-install of ec07clean.zip + ec07.tar + update.zip won't restore everything to "brand new condition". Surely there is a way to tell the phone to "forget all history". But what is it?
In the meanwhile, I managed to make the Settings (leftmost) button work, by manually restoring SDM from Titanium Backup.
Android Market now starts. But the SCREEN OFF problem persists. I am now beginning to believe that Stay Awake actually caused a permanent damage.

verizonless said:
I'm not really interested in 2.1. I just don't understand why a total re-install of ec07clean.zip + ec07.tar + update.zip won't restore everything to "brand new condition". Surely there is a way to tell the phone to "forget all history". But what is it?
In the meanwhile, I managed to make the Settings (leftmost) button work, by manually restoring SDM from Titanium Backup.
Android Market now starts. But the SCREEN OFF problem persists. I am now beginning to believe that Stay Awake actually caused a permanent damage.
Click to expand...
Click to collapse
i understand, but see dl17 is the latest official samsung/verizon release, so what ever you erased will be brought back. the roms that are released here are leaks/hacked so they wouldnt be 100% until tweaked

ciscogee said:
i understand, but see dl17 is the latest official samsung/verizon release, so what ever you erased will be brought back. the roms that are released here are leaks/hacked so they wouldnt be 100% until tweaked
Click to expand...
Click to collapse
I understand that they aren't 100% and I am OK with that. All I want is bring the phone to that pristine state it was right after I upgraded it from DL17 to ec07clean.zip.
Is this possible at all?
I even tried the built in stock recovery 2e to do "factory restore". Didn't help.
Why doesn't it even delete my account information? This is weird.

Wipe all your data. Cache. Dalvik etc.
Sent from my SCH-I400 using xda premium

ciscogee said:
Wipe all your data. Cache. Dalvik etc.
Click to expand...
Click to collapse
I tried this at least 4 times. It doesn't get rid of anything. That's really puzzling.
In the meanwhile, I managed to restore my phone to a usable state (i.e. get rid of the original screen-off problem). Here is how I did it:
Settings > Display Settings > Power saving mode: UNCHECK (was checked)
Settings > Display Settings > Screen timeout: 1 minute (non was selected!)
I bet this was some remanent of that Stay Awake app.
Now, I lost quite a few productivity hours due to this. But at least now I know that this phone will always be mine, because in this particular phone, "Factory data reset" simply doesn't work.

Have you thought about using a different version of clockwork for flashing and wiping? That usually helps or perhaps stock recovery even
Sent from my DROIDX using xda premium

verizonless said:
I tried this at least 4 times. It doesn't get rid of anything. That's really puzzling.
...
But at least now I know that this phone will always be mine, because in this particular phone, "Factory data reset" simply doesn't work.
Click to expand...
Click to collapse
Mystery solved!
It turns out that it is the cyan wipe that doesn't work. The red wipe works.
Here is what I did:
Settings > Privacy > Factory data reset (Erases all data on phone) > Reset phone > Erase everything attempt:
Progressed as expected, then rebooted -- right into Android System recover <2e> (blue!):
Code:
Samsung Recovery Utils
- for BML -
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
___________________________________________
-- Wiping data...
Formatting FOTA:...
FOTA wipe failed.
Formatting DATA:...
Data wipe failed.
Formatting CACHE:...
Cache wipe failed.
Formatting DBDATA:...
Db data wipe failed.
E: Can't mount /dev/block/mmcblk0p3
(No such file or directy)
E: install_application_for_customer:Can't mount HIDDENSDCARD:
your storage not prepared yet. please use UI menu for format and reboot actions.
copy application failed.
As you can see, there were clear error messages, so now I selected "apply sdcard:update.zip" ==> which brought me you into CwM Voodo Lagfix Recovery v2.5.1.x:
Code:
wipe data/factory reset
-- Wiping data...
Formatting DATA:...
Formatting DATADATA:...
Formatting CACHE:...
Formatting SDEXT:...
Formatting SDCARD:/:.android_secure...
Data wipe complete.
wipe cache partition
-- Wiping cache...
Formatting CACHE:...
Cache wipe complete.
Advanced > Wipe Dalvik Cache
Dalvik Cache wiped
Reboot system now
Phone looks now brand new.
Oh wait! I just examined the SD card and it contains all the old stuff. Nothing wiped, nothing formatted. And the Home button doesn't work. And the ticker-feed button reboots the phone... What's going on???

Edit: Looking into what you said

(Guide)How to Restore,Nandroid back-ups,Wiping Data, And Flashing a Rom.

* Creating and Restoring Nandroid back-ups*
Boot your phone into recovery. In case you don’t know how to do that, you can do it by simply launching ‘ROM Manager’ if you have it installed, and tapping ‘Reboot into Recovery’. In case you don’t have ‘ROM Manager’ installed, you can hold down the (volume down button and hold the power button until recovery pops up) (Please make sure fast boot is turned off by clicking menu->settings->applications->uncheck fast boot.*make sure phone is off when trying to boot into recovery*)
1.Scroll down to ‘nandroid’ or ‘backup and restore’ and enter it (by pressing the trackball or optical track pad button on most phones; could be the power button on some phones that lack a trackball or an optical track pad.)
2.Select ‘backup’, and wait patiently for the backup process to complete.
Reboot your phone, and you’re done. You now have a complete backup of EVERYTHING on your phone memory taken on your SD card.
To recover a previously taken NANDROID backup:
Follow steps 1 and 2 of the backup process.
Select ‘restore’. You will now see a list of previously taken backups.
Select the backup that you want to restore, confirming any prompts that you may see.
Wait patiently while the restore process finishes, and reboot your phone once its done. You have now restored EVERYTHING on your phone’s memory to the way it was when that backup was taken.
*HOW TO WIPE DATA FULLY*
wipe data/cache/dalvik cache
*note that in some select cases,when updating a rom with a newer version of that same rom,the developer may tell you "a full wipe is not needed" in wich case you can eliminate the data wipe. most of the time,however,its a good idea to wipe all 3 of these things
*using the volume rocker and home softkey,in the main menu in clockwork recovery:
-select "wipe data/factory reset".scroll past all the NOs and select "yes-- delete all user data"
-wait for it to say "data wipe complete". youll be back at the main menu
-select "wipe cache partition". scroll past the NOs and select "yes-- wipe cache"
-wait for it to say "cache wipe complete". youre now at the main menu again
-select "advanced"
-select "wipe dalvik cache". scroll past the NOs to "yes- wipe dalvik cache"
-wait for it to say "dalvik cache wiped". youll still be in the advanced menu,so go back
*FLASHING A ROM*
1.Download the installation package for whichever ROM you want to install. These are available on a variety of third-party enthusiast ROM development websites, but the actual ROM will always be enclosed in a ZIP file. Refer to XDA Developer's EVO 4G development forum as a starting point for some user-developed EVO 4G ROMs.
2
Use the USB cable to connect your phone and computer. Select "Disk Mode" and, through "My Computer," drag the ROM installation ZIP file onto your EVO's SD card.
3
Turn off your phone. Hold down the "Volume down" and "Power" buttons to reboot the EVO into HBOOT mode. Use the volume rocker to scroll to "RECOVERY." Press down on your EVO's physical scroll button to enter recovery mode. Here, a text menu with multiple options will be displayed in the upper left-hand corner of the screen.
4
Use the volume rocker to scroll down to "Install zip from sdcard." Press the scroll button.
5
Highlight "Choose zip from sdcard" and press the scroll button. Here, your SD card's contents will be displayed, including your ROM's ZIP file.
6
Highlight the ROM's ZIP file and press the scroll button. The EVO will ask for you to confirm the installation---press the scroll button again to begin the ROM-flashing process. This will cue up an onscreen progress bar; once it disappears, reboot the EVO to finish the ROM flashing process.

Should explain how to wipe and what to wipe in the steps and there is already a guide for this
Edit:should also cover how to make and restore a backup
Sent from my PC36100 using XDA App

Ok and I know there are guides I just wanted to make one to see hale I did lol
Sent from my PC36100 using XDA App

turboxsloth said:
Ok and I know there are guides I just wanted to make one to see hale I did lol
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
That's fine and dandy, but if you wana 'compete' with the other guides, you'll have to be a lot more detailed.

evo4gnoob said:
Should explain how to wipe and what to wipe in the steps and there is already a guide for this
Edit:should also cover how to make and restore a backup
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Their i made a better how to what you think?

turboxsloth said:
Their i made a better how to what you think?
Click to expand...
Click to collapse
Need to cover how to backup and restore because someone could look at the thread and go about wiping everything without having a backup if anything goes wrong
Sent from my PC36100 using XDA App

evo4gnoob said:
Need to cover how to backup and restore because someone could look at the thread and go about wiping everything without having a backup if anything goes wrong
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
What do you think about this now. I think i got everything i already have another post on how to gain s-off..

turboxsloth said:
What do you think about this now. I think i got everything i already have another post on how to gain s-off..
Click to expand...
Click to collapse
Where it says hold down power button and volume down to get into recovery please mention you have to have the phone off to do that combo and to make sure fastboot is not enabled
Sent from my PC36100 using XDA App

evo4gnoob said:
Where it says hold down power button and volume down to get into recovery please mention you have to have the phone off to do that combo and to make sure fastboot is not enabled
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
There i think i got it all down lol....

turboxsloth said:
There i think i got it all down lol....
Click to expand...
Click to collapse
Yea, disable fastboot in the rom settings prior.

teh roxxorz said:
Yea, disable fastboot in the rom settings prior.
Click to expand...
Click to collapse
LOL......................