Related
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Same thing here.
It charges through USB but it doesnt connect.
If i choose the storage option it works fine.
I want to sync my outlook and i cant...
What the heck...?
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Come on... give something drastic!
Already done that, rebooted the pc and the hd2...
still nothing
djchubbs said:
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Click to expand...
Click to collapse
believe it or not i have done that mannyy times and did alot of device manager things to try and let both computers recognize the hd2 but still nothing haha..
ive had previous hd2's and they've all connected fine untill this one, maybe its this specific one thats giving me trouble. but regardless, it charges via usb then it should be able to recognize it
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
johncmolyneux said:
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
Click to expand...
Click to collapse
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
k20a1 said:
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
Click to expand...
Click to collapse
That is very weird. Sorry mate - never heard of it doing that for anyone before.
Make sure you have the mobility center/active sync program installed on your computer. Without it it won't work.
On Vista or Seven, with the HD2 plugged in, you can find the program/drivers by launching and refreshing manually Windows Update. On XP you have to do that manually.
Good luck.
This happens to me often. In my case I have found it to be a weird driver issue. Go to device manager and look for the yellow triangle. Right click and update driver software. This worked for me I hope it helps.
bit late but just flashed maxsence and i love the look, but have allready had to restart by phone 10 times in 10 minutes. I'll wait for the next release. back to GTX for now.
Good work NRG. keep it up.
this is one of the many WM6.5 errors!
need Android soon!
Ok here we go.
The phone did not connect through activesync to my pc. When i selected to connect as mass storage it connected.
I checked for driver issues in device manager but nothing came up.
I checked the hd2's activesync. Bingo! the activesync was crashing when i was running it. I had to hard reset the phone.
Now it works fine.
My guess is that maybe a program that i installed recently was buggy and created this particular problem. Unfortunately i have about 50+ programs installed (including themes etc) and i m not sure which one it was.
I was installing all the programs again today one by one and after the install process was completed i connected the hd2 to usb to find which app was the problematic one.
After installing almost(some were found useless) all of the apps (here is the crazy part) the hd2 still was connecting through activesync....
HTC will drive me nuts...
Anyway the phone now connects correctly.
I cant understand which was the problem....
as odd as it may sound i think i figured it out.
i think its the usb cable that im using, i have to wiggle it around for it to connect to active sync but once it connects its not a stable connection as it cuts in and out.
but charging capabilities work though!
pos wire, i ordered a new wire and if that one fails also, i will have to get my hd2 replaced for faulty usb port
thanks for all the replies much appreciated
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
angelossssss said:
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
Click to expand...
Click to collapse
i did whenever i custom rom'd it, it still does the same thing. yes it will connect via usb while in bootloader but will not during regular phone operations lol
"Disk drive" mode not working with XP laptop
HD2 is working fine with my desktop, but wit laptop I can only use ActiveSync to browse files.
When I connect the USB cable I get:
"Found new hardware wizard"
but it tells me that it Cannot Install This Harware - Disk Drive
"An error occurred during the installation of the devie The system cannot find the file specified"
And I only have "Finish" to click - if I click it the wizard lunces again immediately and goes on and on with no end.
HD"/Leo does not appare in Disk Manager (I know ablut the drive lettering issue)
I'm sure its my XP issue, but I havent found drivers to fix that, and I'm not about to reinstall XP on my lappy in near future.
Transfer files - Solved
;
k20a1 said:
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Click to expand...
Click to collapse
I share the same here and I was despaired of trying to solve it with any logical, as well with illogical, measures. Such as: rebooting, changing usb cables, reinstalling activesync 4.5, etc.....etc...blla..blla...blla...
However, I solved the "Transfer files issue" by taking out the sd card from the HD2 and connect it with an external cards reader to my pc.
The card reader connected and works with the same usb cable that does not work with the HD2.
That way I load it with all files and in the same occasion I reload into my computer the daily spb backup files.
However, I have the feeling that the reason for that problem is a missing file/driver named: "Setup1.SPL" in the pc windows operating system.
In order to solve that it seems that only reinstalling windows on my pc will be the solution which defiantly do not like.
It seems like a craps shoot for me if windows will recognize it... hell sometimes my notification bar tells me usb is connected but doesn't give me options to turn it on or off... and this is all with USB set to mass storage... is there possibly something I am doing wrong?
Like sometimes it hooks up without any issues, other times windows sees it, but after a few minutes says its failed to install a MTP USB device, so I have tried pointing it at the location where the sammy USB drivers were installed but nothing... I have tried uninstalling/reinstalling the drivers and manually switching them to other random things...
sometimes a reboot of the comp works it out, but other times it doesn't... I have the feeling I am just missing something...
Same here, except i'm on WinXp SP3. Get USB connected icon in notification bar of Vibrant, but windows task tray says failed to install device.
Looks like iffy drivers to me. Since samsung apps isn't available in the US yet, is there somewhere else we can get Kies?
The file you want for Windows 7 x64 is called GalaxyS_64.zip - worked perfect for me. Can't remember where I downloaded it from, though... uploading it now.
Edit: Here's the file you want.
http://www.filedropper.com/galaxys64_2
gordon.mott said:
The file you want for Windows 7 x64 is called GalaxyS_64.zip - worked perfect for me. Can't remember where I downloaded it from, though... uploading it now.
Edit: Here's the file you want.
http://www.filedropper.com/galaxys64_2
Click to expand...
Click to collapse
That's the same thing I have tried installing a few dozen times before... still won't work.
There are multiple notifications you have to deal with on the phone. Took me a while to figure it out, too.
First you have to pick the mode you connect to W64 in (Mass Storage), then you actually have to mount the internal memory and card as drives for W64 to see them. This is all in the Notification bar on your phone. Just because you see the USB icon does NOT mean you are supposed to be connected.
THEN you get the "What do you want to do with this?" from Windows.
I got so tired of all the confirmations I just installed Dropbox. Now if I want a file on the phone I just drop it into my Phone Stuff directory and pick it up on my phone. No USB cable, no WiFi, just grab it and go.
If you're looking to xfer over a big batch of media files there is DoubleTwist and several other apps like it that will do so over WiFi.
Col.Kernel said:
There are multiple notifications you have to deal with on the phone. Took me a while to figure it out, too.
First you have to pick the mode you connect to W64 in (Mass Storage), then you actually have to mount the internal memory and card as drives for W64 to see them. This is all in the Notification bar on your phone. Just because you see the USB icon does NOT mean you are supposed to be connected.
THEN you get the "What do you want to do with this?" from Windows.
I got so tired of all the confirmations I just installed Dropbox. Now if I want a file on the phone I just drop it into my Phone Stuff directory and pick it up on my phone. No USB cable, no WiFi, just grab it and go.
If you're looking to xfer over a big batch of media files there is DoubleTwist and several other apps like it that will do so over WiFi.
Click to expand...
Click to collapse
Well I am installing dropbox because this is getting ridiculous... after a fresh flash it mounted once, then after that it wouldn't ever again. I tell it to mount to my computer and everything, but the computer just shows an icon that it is trying to install the drivers and never does... Come on samsung, stop being so proprietary...
Wow guys I didn't have any problems at all. USB Mass Storage worked the first time and it keeps working. Where I encounter problems is when I set it to USB Debugging then it doesn't get recognized.
ETA: I'm on Windows 7 x64 with all the current updates.
My windows is 32bit XP, but try this trick i've discovered, may be it will help. Say into voice dialer "Open SD card" -> check "Enable USB mass storage". Let's know how it works
Hey Degeneration, you can also install the Android SDK.
Unfortunately I can't post external links until I'm validated by a mod, but if you google "screenshot vibrant" (w/o the quotes) it should be the top link.
The domain is know your cell dot com and it has links to the Android SDK and the Java SE SDK in the instructions to take screenshots of your Vibrant.
I personally think you should try this because your phone may be defective. I'm running W7-64 Pro and didn't have to do anything to get the phone and the PC to see each other.
Wow I had no idea people were having this issue. I'm running Win 7 Ult. x64 and for me it was just plug in and go. When I was rooted on my G1 I had a similar issue but using USB Debug and the Android SDK fixed that. hope you get it figured out.
Yeah I'm on win7 and I installed the drivers and plugged in the phone and was good to go
Sent from my Samsung Vibrant using XDA App
I installed the drivers before ever plugging the phone in. I also have had SDK, adb, and Odin3 ready before plugging it in. When I first got it I immediateness set it to mass storage and didn't have a problem. Then when I started messing with it more I started having trouble every once in a while with it mounting, to the point that now it works every once in a while, mostly right after a fresh flash. Personally I think it's a combo of both the phone and the computer doing crap, but it's pretty lame. I don't even remember installing drivers for my G1, and definitely nothing else and I never had an issue with it. I don't see why samsung can't kiss a little butt or pay a little money to have windows recognize the phone and be able to install the drivers from the net. Now if the problem was just for people messing with their phones it would be one thing, then it's on me. But last night I was running stock again and it only worked the first time it connected, but I forgot to switch to mass media so I disconnected, switched, reconnected, and nothing. Tried switching back and same thing...
Constantly just keep getting told at best that windows failed to install an MTP (or whatever, I just closed the thing in the notification area and when I tried reconnecting the USB cable I got the phone just telling me USB is connected but giving no options) device failed to install...
bah... oh well
So I can't get my desktop OR laptop running XP Pro 32 to even recognize the phone. As in no audio plays and nothing appears in the system tray. Tried with/without debugging mode, installed the samsung drivers etc. The phone doesn't even show up in device manager at all- not even as something unrecognizable. Its as if the port is dead. The phone does 'ding' though and charge ok so it is receiving power... though nothing at all appears in the android notification tab when connected. Any ideas or anyone know of any apps on the pc or android side to take a closer look at whats happening on the bus?
The only way that I can get it to work is to put it in media mode. It shows up as a media device in Win7. If I put it on, "ask every time" or whatever it doesn't work and in mass storage mode it shows up as two unreadable drives, they are grayed out in Explorer... Basically...don't use the "ask every time" for USB function.
This function seems like such a simple thing, not sure why Samsung has so many issues with it considering they have been making media devices for a long time.
Anyway... do you have access to a newer OS to at least rule that out as a cause. Not saying it shouldn't work with XP 32 but just something to check out.
I was having similar issues at first. I take it adb doesn't work either? Well my fix was to delete my whole Android SDK folder, then I redownloaded it (though I just kept the "tools" folder this time). Then I downloaded "USBDeview" (google it) to delete every USB driver that had to do with android (basically just left the printers, HID, and my Sansa drivers), restarted, then I downloaded the samsung drivers from the thread on here, plugged my phone in and manually pointed the driver search to the drivers.
ADB and Mass Storage has been working fine since. All I can tell you is to keep checking cause there's something you're missing, I also thought to myself "what the heck else can I do?" since I had done each one of those steps previously, but maybe I just had to do them all together. Good luck.
another possible solution is to change cables if you're not using the samsung provided cable - some cables are charger only (no data) - some of the motorola cables are charger only and we've already had one poster that had that issue
I couldn't get it to work at first either. I more or less did this.
I plugged in my phone. I did not enable mass storage mode on my phone. Walked away and let my PC think for a while. I came back and I noticed I had two new drives. I then enabled mass storage mode and could connect.
Two of my machines I had to do this. I'm not sure why it wasn't instant, but it just took a bit of patience and walking away from the machine to let it think for a while before I guess it installed the drivers and made its peace with the fact it wasn't the G1 any more.
Say into voice dialer "Open SD card" -> check "Enable USB mass storage". That works if port on PC is OK.
If it's a driver issue, open device manager and uninstall the usb ports. Unplug everything from usb and when you reboot the computer it will automatically reinstall the usb ports.
Sent from my Vibrant
I ran into the same issue. It was a problem with the USB cable I was using. As soon as I tried a different cable it worked fine.
larryccf said:
another possible solution is to change cables if you're not using the samsung provided cable - some cables are charger only (no data) - some of the motorola cables are charger only and we've already had one poster that had that issue
Click to expand...
Click to collapse
I second this, I forgot my sammy cable at work on Friday and on way home stopped at T-Mo and picked up a charger w/cable and realized right away this was just a charging cable as soon as I connected it to my PC. I'm returning the cable back to T-Mo tonight. At least I was able to charge my phone over the weekend.
UPDATE: You guys are right, it is the goddamn cables! I bought an extra wall charger + cable at the t-mobile store and was using that at home. I had left the original in-box cable at work. Tried the cable at work today and now the drives pop up. Still don't appear writeable but I can look into that when I have time, probably the typical driver issue. As far as I can tell those separate cables are power only! $15 for a two wires + dc adapter. Thanks Samsung. Grr.
i suspect the mfgrs have gone to charge only cables to help keep folks from tethering - just a suspicion
if the "drives" are popping up, have you "mounted" the phone (pull down notification bar, clik on USB connected and it should give you a window asking to mount the cards or drive)
FYI....The Rocketfish cables you get from Best Buy do not work. They are only capable of charging.
@larryccf...I don't think certain manufacturers are implementing this on purpose so we can't tether. I think their just being cheap.
Where I got my cables on the cheap! and my problem.
I got my cable at monoprice.com. Check it out that is a 10 foot usb cable for $1.69 and it works for me. They have different lengths and even some colors. Now my Mass Storage issue . . .
My Mass Storage via USB works fine unless I enable "USB Debugging" which one of my apps needs to work. Once debugging is enabled I loss the ability to see my sd card and internal storage on my XP netbook. any ideas????
Same Problem
I have the exact issue, tried many things have'nt found a fix yet. Any help would be greatly appreciated!!!
Thanks,
crx
larryccf said:
if the "drives" are popping up, have you "mounted" the phone (pull down notification bar, clik on USB connected and it should give you a window asking to mount the cards or drive)
Click to expand...
Click to collapse
this worked for me Thanks
Yes phone is mounted, and can be seen w/o usb debugging enabled. However with usb/debugging on it does not read the phone being connected. Meaning that I cannot connect to ADB which is my main concern.
thanks for response tho,
crx
crxforya said:
Yes phone is mounted, and can be seen w/o usb debugging enabled. However with usb/debugging on it does not read the phone being connected. Meaning that I cannot connect to ADB which is my main concern.
thanks for response tho,
crx
Click to expand...
Click to collapse
This is my issue exactly, and I haven't found a fix either. Called T-Mobile and they thought turning off debugging was the only fix I needed.
Most of them, sorry to say are half retarded. They think a data reset is the cure-all
crxforya said:
Most of them, sorry to say are half retarded. They think a data reset is the cure-all
Click to expand...
Click to collapse
Ain't that the truth!
If you are running windows (x86 or x64), it would be wise to install the samsung drivers. I was having this exact problem, but as soon as I installed the drivers from samsung, viola!
I had the latest drivers from google, and they did not work for me.
Here is a link to the thread containing the links to the drivers, thanks to TGA_Gunnman:
http://forum.xda-developers.com/showthread.php?t=728929
When I plug my Vibrant in by USB on WinXP I am getting a device not recognized error. I get nothing when plugging into a Mac. I've tried multiple cables and I have changed the USB options to each option.
I have rooted the phone and installed the GPS fix.
Any suggestions for fixing this would be appreciated.
Thank you
Load the galaxy s drivers, will work after that
http://forum.xda-developers.com/showthread.php?t=728929
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
What about for Mac OS? The phone doesn't show up when I mount the cards. Is there a way to get mass storage to work on a Mac that doesn't involve turning on USB debugging?
I'm not a mac person, sorry, hopefully someone else can chime in on that.
Edited, if you go to the thread i linked, the op states for linux and mac the android sdk drivers should work, hope that helps.
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
When you plug it in are you sliding down the notification bar and selecting the USB Connected > Mount option?
As well when you are done you have to Unmount when you are done.
Yeah, like kizer said too, mount the device. I was assuming that step is s.o.p.
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
kizer said:
When you plug it in are you sliding down the notification bar and selecting the USB Connected > Mount option?
As well when you are done you have to Unmount when you are done.
Click to expand...
Click to collapse
Yes, I had a G1 for years and that always worked perfectly. The only way to get my Vibrant to show up though is to use USB debugging mode.
I just did some quick googling and it seems mac users are doing exactly what you said you don't want to do, setting usb debugging on, and that seems to be a quick fix. I'm sure there is more info out there in cyberspace, but if debugging works, I say go with it. I always have debugging turned on, incase I need that oops adb action.
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
BossDj said:
Yeah, like kizer said too, mount the device. I was assuming that step is s.o.p.
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
Click to expand...
Click to collapse
With the OP having one post who knows if he/she really knew it had to be mounted. LOL Figured it wouldn't hurt just to mention just in case.
BossDj said:
I'm not a mac person, sorry, hopefully someone else can chime in on that.
Edited, if you go to the thread i linked, the op states for linux and mac the android sdk drivers should work, hope that helps.
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
Click to expand...
Click to collapse
When i use it on my Mac, i have to enable USB debugging. Then both drives (internal and SD) pop up just fine.
So it looks like someone answered this, just confirmation then.
Another theory
My Vibrant has mounted normally and without any problems on WinXP sp3 and Win7-64 systems, but I have also run into the occasional system where it will not work at all.
On the systems where things worked normally it was never required that I load a special Samsung USB driver for the phone. The standard mass storage drivers included with Windows worked fine.
My new theory is that there may be a drive letter collision issue in some cases. On the laptop that I use with my phone 90% of the time the phone always mounts as drive G: and H:.
On other machines I have noticed that the phone always seems to mount as G: and H: even if E: and F: are available. I'm not sure how/why it always gets mounted using those letters. It may somehow be defaulting to that because G: and H: were the first letters available on the first system I plugged it into.
I have a Win7-64 desktop machine that will not currently allow the phone to connect. This particular machine already has G: and H: assigned to hard drive partitions.
I will probably experiment with temporarily changing the letter assignments to see if I can get the phone to mount. It's worth a shot I guess.
Sorry, I didn't go into as much detail as I could have.
I've installed those drivers listed here as well as any other I could find. I've tried USB debugging mode, changed all the USB modes listed. I've mounted and unmounted the SD cards using the settings menu when doing this.
Is it possible that there is some background service that should be running? Or is it possible that something in the firmware is screwed up? I guess it's also possible that the USB plug itself is messed up?
Thanks for the help.
I used to use this forum years ago when I had a HTC WinMo phone, it seems to have lost any record of past posts due to inactivity.
As kizer stated in his post, are you mounting from the prompt on your phone's notification bar? Once plugged into your pc or mac, you slide down the notification bar from the top of your home screen, click on the usb prompt then select mount. Thats the only step you didn't list that may have been missed.
Edited - the prompt in the notification area may say mass storage, my home pc fried last week so i cant test it to get you the specific verbage.
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
BossDj said:
As kizer stated in his post, are you mounting from the prompt on your phone's notification bar? Once plugged into your pc or mac, you slide down the notification bar from the top of your home screen, click on the usb prompt then select mount. Thats the only step you didn't list that may have been missed.
Edited - the prompt in the notification area may say mass storage, my home pc fried last week so i cant test it to get you the specific verbage.
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
Click to expand...
Click to collapse
I don't get any prompt at all. At this point I will just install CM6.1 when it comes out and hope that fixes the issue. It's usable for now. I can transfer files using WiFi File Explorer for now.
It helps if you know if you are USB 1.0 or 1.1 or 2.0....or even 3.0.
Also, are the USB ports powered ?
Are the USB ports on the computer in question filled with dust and dirt ?
Contacts corroded ?
Are the ports recognized by the operating system correctly (you know, drivers loaded since it's old arsed WinXP) ?
Do you undertand how to operate a computer at a higher level than just being able to install viral apps ?
Malware ?
Trojans ?
I could go on all day.
It works fine here, on Win7x64, WinVistax64, and *nix.
That is bizarre you should get a least something in your taskbar.
Click for larger photos if you like.
Heres what my looks like and of course I have the taskbar pulled down so you can see it.
Below that is the box you would click to say connect it.
I did have a freind who didn't realize he could pull down the notification bar. Could that be the case here?
Op, you do know you can pull down the bar at the top of your screen, the one with your clock and battery icon etc., put your finger up there and swipe in a downward motion.
Sent from my SGH-T959 using XDA App
n2ishun said:
It helps if you know if you are USB 1.0 or 1.1 or 2.0....or even 3.0.
Also, are the USB ports powered ?
Are the USB ports on the computer in question filled with dust and dirt ?
Contacts corroded ?
Are the ports recognized by the operating system correctly (you know, drivers loaded since it's old arsed WinXP) ?
Do you undertand how to operate a computer at a higher level than just being able to install viral apps ?
Malware ?
Trojans ?
I could go on all day.
It works fine here, on Win7x64, WinVistax64, and *nix.
Click to expand...
Click to collapse
I have tried this on a corporate IT managed WinXP system (running Kapersky AntiVirus) and a currently updated Snow Leopard MacBook. I could give details all day as well. Both are in good condition and very likely not the issue.
Seriously, if you have nothing useful to say don't say anything at all.
vkewalra said:
I have tried this on a corporate IT managed WinXP system (running Kapersky AntiVirus) and a currently updated Snow Leopard MacBook. I could give details all day as well. Both are in good condition and very likely not the issue.
Seriously, if you have nothing useful to say don't say anything at all.
Click to expand...
Click to collapse
they don't understand i had this issue too man and i fixed it.
first go to that link and download those drivers... use the uninstall app to uninstall the drivers off your computer.
while your doing that go into your phone setting>applications>usb settings
make sure it says "ask on connection" (you can change it later) go back and go to development to turn on usb debugging.
reinstall drivers, connect phone wait for the drivers to load. the un-connect phone turn debugging off.
and it was fixed for me.
hope this helps
Not entirely sure what kind of process might be needed, but is it at all possible to use the older method of transferring files between a computer to an Android device (USB Mass Storage) instead of MTP?
MTP (in my experience) is... not ideal in most cases. File transfers are seemingly slower, can only do one thing at a time (I think if your transferring a file, you can't even browse other folders on the MTP device), and sometimes file transfers just get stuck for no reason. Was trying to copy over a few PDF's to my N10 and it seems to just hang randomly, had to reboot the device 4 times already (twice to just create and rename a folder).
what about the option in settings -> storage -> and tap the menu button on the top right and select USB Computer connection?
espionage724 said:
Not entirely sure what kind of process might be needed, but is it at all possible to use the older method of transferring files between a computer to an Android device (USB Mass Storage) instead of MTP?
MTP (in my experience) is... not ideal in most cases. File transfers are seemingly slower, can only do one thing at a time (I think if your transferring a file, you can't even browse other folders on the MTP device), and sometimes file transfers just get stuck for no reason. Was trying to copy over a few PDF's to my N10 and it seems to just hang randomly, had to reboot the device 4 times already (twice to just create and rename a folder).
Click to expand...
Click to collapse
I had the same problem at first, but I realized my USB ports on the front end of my PC arent USB 2.0, so I plugged it into the back, and works like a charm. Just a thought.
corporal_hades said:
what about the option in settings -> storage -> and tap the menu button on the top right and select USB Computer connection?
Click to expand...
Click to collapse
I already did that and tried both options (MTP & PTP), but the N10 does not show up on my computer at all in either case, with or without USB debugging. I have had no such problems with my other android devices (all still running gingerbread, in case that matters).
My N10 is rooted and my computer runs xubuntu 12.04; I don't have a window box to test... Any suggestions? Thanks!
case-sensitive said:
I already did that and tried both options (MTP & PTP), but the N10 does not show up on my computer at all in either case, with or without USB debugging. I have had no such problems with my other android devices (all still running gingerbread, in case that matters).
My N10 is rooted and my computer runs xubuntu 12.04; I don't have a window box to test... Any suggestions? Thanks!
Click to expand...
Click to collapse
Unfortunately the answer is no.
There was a long discussion on the Galaxy Nexus forums about it a while back.
I also wish for a usb mass storage option for compatibility with radios for playing music. They don't read mtp/ptp for any generic one I've come across.
ceribaen said:
Unfortunately the answer is no.
There was a long discussion on the Galaxy Nexus forums about it a while back.
I also wish for a usb mass storage option for compatibility with radios for playing music. They don't read mtp/ptp for any generic one I've come across.
Click to expand...
Click to collapse
Hmm, but what's the main thing stopping this from being possible? I thought I heard of a few JB devices that were able to get USB Mass Storage (LG Optimus G I think has a method, or whatever the phone is that has similar parts to a Nexus 4), and a Galaxy Tab I used to have had Mass Storage in ICS.
Mass storage is possible when the sdcard volume is actually a separate disk. On the Nexus 10 this is an "emulated" sdcard and cannot use USB mass storage safely because that protocol gives exclusive control to PC.
The easiest solution is to use one of the many wireless transfer apps like AirDroid.
Another option for Linux users if you really want a wired transfer is to use adbfs. This is a FUSE wrapper around the usb android debug protocol.
https://github.com/spion/adbfs-rootless
adbfs would give you seamless mounting just like USB Mass Storage.
Another solution, though not a seamless mount, is QtADB: http://qtadb.wordpress.com/
This is another wrapper around the usb android debug protocol.
Oh my god, thank you for the AirDroid recommendation. Holy crap is this program useful with my new nexus 4.
dalingrin said:
Mass storage is possible when the sdcard volume is actually a separate disk. On the Nexus 10 this is an "emulated" sdcard and cannot use USB mass storage safely because that protocol gives exclusive control to PC.
The easiest solution is to use one of the many wireless transfer apps like AirDroid.
Another option for Linux users if you really want a wired transfer is to use adbfs. This is a FUSE wrapper around the usb android debug protocol.
https://github.com/spion/adbfs-rootless
adbfs would give you seamless mounting just like USB Mass Storage.
Another solution, though not a seamless mount, is QtADB: http://qtadb.wordpress.com/
This is another wrapper around the usb android debug protocol.
Click to expand...
Click to collapse
Thank you so much! AirDroid is genius!
MTP storage to USB storage: accidental solution!
espionage724 said:
Not entirely sure what kind of process might be needed, but is it at all possible to use the older method of transferring files between a computer to an Android device (USB Mass Storage) instead of MTP?
MTP (in my experience) is... not ideal in most cases. File transfers are seemingly slower, can only do one thing at a time (I think if your transferring a file, you can't even browse other folders on the MTP device), and sometimes file transfers just get stuck for no reason. Was trying to copy over a few PDF's to my N10 and it seems to just hang randomly, had to reboot the device 4 times already (twice to just create and rename a folder).
Click to expand...
Click to collapse
dear espionage,
i just wanted to share this with you in case it would be helpful. in fact, you might even have more technical know-how to find out how i accidentally managed this useful fix. first, the reason i was looking for this MTP to USB storage was my habit of synchronizing my thumb-drive to my desktop using any free synching software. this of course, can be only be done when the storage device is recognized as a DRIVE. unfortunately, i believe with the updating of the OS to 4.1 onwards, the USB storage option has been removed, and now only access to MTP is possible. the bad side to this is that one's device is recognized as a portable media device and this means i can no longer synch like i did before the contents of the SD card to my desktop.
second, i found the solution accidentally by installing MultiMount-SD v.2.5 into my Sony Xperia V (LT25i). accidentally i say, because when i clicked on it for the first time, it wouldn't work. it showed a help tip saying that i should trying enabling what it called an MTP fix provided by the program. i did this, restarted the program and guess what happened. there occurred a looping sequence (i guess unending) device recognition-mount and unmount (the PC sounded this off many times), since there was no end to it, i decided to UNINSTALL the program even while the recognition loop was going on. in the meantime one could see a drive appearing in the EXPLORER with a (?), then it would appear with an assigned drive letter, then finally disappear, and so on.
i successfully uninstalled the MultiMount apk, and surprisingly even with the message that the device wasn't properly recognized or installed, i could now connect my Xperia and it mounts as a USB storage device and no longer MTP. to test this 'accident', i tried connecting it to my desktop, running Windows 7, and it worked without any hitches! I don't really mind losing the MTP option, sides it's very limited in its connectivity with the PC. Another bonus, is despite this, i can still communicate with my device through the MyPhoneExplorer program that allows one to send text messages and other stuff. This was one wonderful accident.
oh, one last thing, even with rebooting my phone, the setup seems to have become a 'permanent fix'. now, when the device is connected one sees in the activated portions in the top menu saying: USB Storage - SD card connected to PC. This was never there before... And i wonder what MultiMountSD must have left permanently to allow my Xperia V to now connect as USB storage. Yahoo!!!
i hope though, you could see what the technical side of this accident is, so that somehow something more stable could be done or programmed without having to go through the 'accidental' procedure i have detailed above.
ciao,
bodega1968
case-sensitive said:
I already did that and tried both options (MTP & PTP), but the N10 does not show up on my computer at all in either case, with or without USB debugging. I have had no such problems with my other android devices (all still running gingerbread, in case that matters).
My N10 is rooted and my computer runs xubuntu 12.04; I don't have a window box to test... Any suggestions? Thanks!
Click to expand...
Click to collapse
I had this issue with Ubuntu 12.04 too, after I updated to 13.04 it started to work like a charm . You can also try changing the rules in your PC, you can find how to do it in the Google website .
"This Story Ends Where It Began" - Octavarium (Dream Theater)
Sent from my GT-I9505
OTG
You can use OTG and transfer files
MTP and USB Storage
SmokinCharger said:
You can use OTG and transfer files
Click to expand...
Click to collapse
Thanks SmokinCharger! I guess it's quite clear that attempts to allow certain devices to be read in USB Storage mode is a hardware configuration. If your device isn't designed for it, then it won't be able to do this. It's like wanting your volkswagen to have a 6th gear... thus, what was posted previously is true:
Originally Posted by dalingrin:
[Mass storage is possible when the sdcard volume is actually a separate disk. On the Nexus 10 this is an "emulated" sdcard and cannot use USB mass storage safely because that protocol gives exclusive control to PC.]
*I also would like to apologize what i've posted earlier regarding my accidental discovery with Multi-Mount SD. What the app actually did was to access a feature in my device (rooted Xperia V LT125i) which i wasn't aware of. All the time, my device was actually configured to have both MTP and USB Storage.:silly:
So for such devices that are hardware configured only to be MTP or PTP, the only 'solution' or 'alternative' would be to "ROOT" them and set them up with OTG (On the Go) USB access. This may have some hitches, but i've been using this quite a lot. Sometimes though, a RESET is required so that explorer applications would function normally.
Thanks again. I guess this will be all for now in our attempts to reconfigure something that is hardware defined in certain devices.
bodega1968 said:
Thanks SmokinCharger! I guess it's quite clear that attempts to allow certain devices to be read in USB Storage mode is a hardware configuration. If your device isn't designed for it, then it won't be able to do this. It's like wanting your volkswagen to have a 6th gear... thus, what was posted previously is true:
Originally Posted by dalingrin:
[Mass storage is possible when the sdcard volume is actually a separate disk. On the Nexus 10 this is an "emulated" sdcard and cannot use USB mass storage safely because that protocol gives exclusive control to PC.]
*I also would like to apologize what i've posted earlier regarding my accidental discovery with Multi-Mount SD. What the app actually did was to access a feature in my device (rooted Xperia V LT125i) which i wasn't aware of. All the time, my device was actually configured to have both MTP and USB Storage.:silly:
So for such devices that are hardware configured only to be MTP or PTP, the only 'solution' or 'alternative' would be to "ROOT" them and set them up with OTG (On the Go) USB access. This may have some hitches, but i've been using this quite a lot. Sometimes though, a RESET is required so that explorer applications would function normally.
Thanks again. I guess this will be all for now in our attempts to reconfigure something that is hardware defined in certain devices.
Click to expand...
Click to collapse
You're welcome. Chainfire is a great and well known developer that has development many great apps including Stickmount. Look it up in Play especially the Pro version, which is "The price is aimed at being approximately one beer at the bar ". It works with mounting the UBS OTG. The Pro will automatically mount and unmount.