Related
Tab boots to "welcome" screen but does not register touches, leaving me unable to move forward. Ready for the long story?
I am helping a friend who bought this tab from a third party. When he received it, the previous owner stated that they did a factory reset back to Honeycomb but he noticed that it did in fact still have ICS on it. Probably OTA'd when the previous owner did the reset. Tab worked fine for about two weeks until one day he came home and the lockscreen would not register touches. That's where I come in.
I did the "erase, wipe" (booting while switching the screen rotation back and forth.) Tab wiped and brought me to the "Welcome" screen where you select country and language and still does not register touches. I have tried blackthund3r's flash and manager tools, as well as multiple guides to recover from what I have seen referred to as "flu." The main problem I have is that I cannot get a valid UID. Using USBDeview gives me an 11 digit serial but it returns as invalid when plugged into DotNetDetector and I am unable to use SDB because the non working touchscreen has left me unable to enable USB debugging.
Any suggestions, help, advice, on things I can try? I am really stumped and would like to help my friend/conquer this problem. Thanks for anyone who has taken the time to read this/offer help.
generalagony said:
Any suggestions, help, advice, on things I can try? I am really stumped and would like to help my friend/conquer this problem. Thanks for anyone who has taken the time to read this/offer help.
Click to expand...
Click to collapse
Get ready for some Ubuntu... Here is the guide that will get you a valid sbk. My nephew just brought his tab to me after forgetting his password. So I was in the same boat as far as UID/SBK. This is gonna take a while so put some time aside.
JdgM3NT4L said:
Get ready for some Ubuntu... Here is the guide that will get you a valid sbk. My nephew just brought his tab to me after forgetting his password. So I was in the same boat as far as UID/SBK. This is gonna take a while so put some time aside.
Click to expand...
Click to collapse
As sure as I am reading yoru reply the damn thing just started working. I was able to get to USB debugging and via ADB I was able to pull the UID; which was the same as the one I got from USBDeview btw. Still an 11 digit code. The only thing I can guess is that it has a faulty touchscreen, or maybe the battery was just too low to register touches? Thanks for your reply though. Always nice to be able to rely on the folks at XDA.
That is too cool. The other way is a learning experience to be sure. Enjoy.
JdgM3NT4L said:
That is too cool. The other way is a learning experience to be sure. Enjoy.
Click to expand...
Click to collapse
I have now realized that the touchscreen does work but is very glitchy and have found that lots of people have had problems with the OTA ICS update. Any suggestions on a good custom ROM for this tab? It isn't mine so I have not been following this section. Would like something close to stock ICS but with fixes that resolve the problems associated with OTA.
generalagony said:
...I was able to get to USB debugging and via ADB I was able to pull the UID; which was the same as the one I got from USBDeview btw. Still an 11 digit code...
Click to expand...
Click to collapse
generalagony said:
I have now realized that the touchscreen does work but is very glitchy and have found that lots of people have had problems with the OTA ICS update. Any suggestions on a good custom ROM for this tab? It isn't mine so I have not been following this section. Would like something close to stock ICS but with fixes that resolve the problems associated with OTA.
Click to expand...
Click to collapse
First check in Settings>About Tablet>Build Version - this will tell you what rom you are currently running -
Then, if you can, download and install Acer Recovery Installer
This tells you what bootloader and recovery is installed.
The glitches you speak of and the 11 digit uid point to an ICS Rom and unpatched HC bootloader - updating to the new BL often fixes these weird glitches BUT if you flash a custom rom as well, you'll be running sweet!!!
If you wanna stay close to Stock then I'd recommend ezterrys one here comes pre-rooted and busy box installed - and if you want to you can install his Over clocked kernel too.... plus its well maintained and supported
there are many tools and guides around to help you...the ones in my sig for instance the cpuid one has a lot of general info in it too re bootloaders, sbk and flash tools.
If you have any q just ask, there's always someone round willing to help...good luck!!
ok so heres the rundown. i have my hd2 and have in the past put a different rom on, so it is not stock(just for a reference point). Now i want android, I have multiple verions n builds which were using paranoid android and cm9 for ice cream sandwhich. Every build i throw on there i always boot thru the sd card thru the clrcad.exe. Every build i try the wifi is never able to find any sources, it just keeps turning on n off.
That is my problem and didnt know how to go about it. Just for Reference 1. I have looked thru all the developer threads and did see others had problems and they got no solutions. 2. i just joined so i cannot post in the developer threads to ask them for help. 3. i did search the forums for similar problems but nothing related to the same problem they were using different build or os. If i missed somthing please tell me.
I thought maybe since i dont have a stock rom on the hd2 it might be interfering with ics. The wifi works fine while using windows. A second thogut was maybe i should just install the magldr which from what i read would wipe the internal mem, but once the first time putting that on there i could was done i could boot thru that instaed of using clrcab.exe.
Here you go:
http://forum.xda-developers.com/showthread.php?t=1445766
You are welcome.
Marvlesz said:
Here you go:
http://forum.xda-developers.com/showthread.php?t=1445766
You are welcome.
Click to expand...
Click to collapse
i would just hit te thanks! button but it said i didnt have permission so Thanks! i will try thatright now
ok so i applied the apk and installed with superuser permission without a problem. i then reset the phone, but it didnt work. So i made sure that under advavance configuration it said US, tghen proceeded to input the *#94349# and it said that wifix was enabled, but still the same problem it just turns on n off all the while giving me the unending message of "turning on wifi..."
but now here is the things i have tried since yesterday i have made to installer hardspl 2.08 and radio 20.15.50.14 and then magldr. With little trouble i was able to get android to run stright from bootup now instaed of going thru windows. Everything runs great except for wifi, i technicly not sure if data works as to i dont have it on yet, soon tho.... soon...
Any ideas would be much thanks. BTW im trying PARANOIDANDROID HD2 [v1.5b][TABLET/HYBRID][CM9][tytung HWA R3] from the thread [26-Aug-12][sd/mag] paranoid jellybean hd2 Beta v1.992.
You said you tried the same apn under windows and it worked. Now you're on ICS and it doesn't work.
I had this problem a while ago when I went on a vacation, it just used to say "truning wifi on", but nothing shows up. It's a regional wifi problem. OK, try this: flash a rom without a simcard inserted, and check if the wifi is working. IF, it works, then WiFix SHOULD fix your issue, otherwise report back.
(Btw, there is another way to fix the regional wifi by replacing the wireless modules, but I can't find the link, sorry )
Marvlesz said:
You said you tried the same apn under windows and it worked. Now you're on ICS and it doesn't work.
I had this problem a while ago when I went on a vacation, it just used to say "truning wifi on", but nothing shows up. It's a regional wifi problem. OK, try this: flash a rom without a simcard inserted, and check if the wifi is working. IF, it works, then WiFix SHOULD fix your issue, otherwise report back.
(Btw, there is another way to fix the regional wifi by replacing the wireless modules, but I can't find the link, sorry )
Click to expand...
Click to collapse
ok so my next step is is flashing it to the internal, got it. Afraid to do but willing. I tried the wifix and according tothe phone the country code is US right now and currently im trying different kernals from the thread. Once i burn thru those with no success which hopefully ill find a good one i will try your method Thank you for your assistance.
deus_diabolus said:
ok so my next step is is flashing it to the internal, got it. Afraid to do but willing. I tried the wifix and according tothe phone the country code is US right now and currently im trying different kernals from the thread. Once i burn thru those with no success which hopefully ill find a good one i will try your method Thank you for your assistance.
Click to expand...
Click to collapse
ok so i have burn thru most of those kernals not seem to work except some were laggier. Reverted back to original kernal the dev was using and removed sim card. It didnt help still had same problem. Still want to stay with this build but i am looking into a similar build for rom to flash to internal.
deus_diabolus said:
ok so my next step is is flashing it to the internal, got it. Afraid to do but willing. I tried the wifix and according tothe phone the country code is US right now and currently im trying different kernals from the thread. Once i burn thru those with no success which hopefully ill find a good one i will try your method Thank you for your assistance.
Click to expand...
Click to collapse
deus_diabolus said:
ok so i have burn thru most of those kernals not seem to work except some were laggier. Reverted back to original kernal the dev was using and removed sim card. It didnt help still had same problem. Still want to stay with this build but i am looking into a similar build for rom to flash to internal.
Click to expand...
Click to collapse
Oh, you're using an sdrom, sorry I forgot that !
No, it doesn't have to be to the internal, just a fresh install (whether nand or sd, and in your case it's SD)
And you totally misread my answer, I didn't mean Kernels and I didn't mean remove the sim while still on the same rom x)
Maybe it's my fault for writing such an answer, let me paraphrase my answer for you:
1- Remove your current build from the SD card (better if you backup your whole sd to pc and format it)
2- Remove simcard. (BEFORE INSTALLING)
3- Put totally fresh and new rom on sd.
4- Boot up ROM and test wifi.
5- Report back Read the edit
Edit:
OK, first of all, I'm sorry for not reading the whole thread. I just read it again, and will answer your questions.
You wanted to try android so you went for Icecream (which has the regional Wifi issue)
As long as the radio is correct, the stock ROM should not interfere with android.
No, if it is (truly) the regional issue, installing android through MAGLDR will not solve your issue. it will persist.
And btw, instead of doing all the steps, just try a GingerBread ROM, if wifi works there then it is the regional issue.
Marvlesz said:
Oh, you're using an sdrom, sorry I forgot that !
No, it doesn't have to be to the internal, just a fresh install (whether nand or sd, and in your case it's SD)
And you totally misread my answer, I didn't mean Kernels and I didn't mean remove the sim while still on the same rom x)
Maybe it's my fault for writing such an answer, let me paraphrase my answer for you:
1- Remove your current build from the SD card (better if you backup your whole sd to pc and format it)
2- Remove simcard. (BEFORE INSTALLING)
3- Put totally fresh and new rom on sd.
4- Boot up ROM and test wifi.
5- Report back Read the edit
Edit:
OK, first of all, I'm sorry for not reading the whole thread. I just read it again, and will answer your questions.
You wanted to try android so you went for Icecream (which has the regional Wifi issue)
As long as the radio is correct, the stock ROM should not interfere with android.
No, if it is (truly) the regional issue, installing android through MAGLDR will not solve your issue. it will persist.
And btw, instead of doing all the steps, just try a GingerBread ROM, if wifi works there then it is the regional issue.
Click to expand...
Click to collapse
ok so i took sim card, formated the sd card, put fresh build on and started it. Loaded in and still same exact problem. ok so will try gingerbread.
ok so put gingerbread on phone and loaded it up and gave it a reboot just because. Loaded up, turned on wifi hit settings for it, it just said scanning. Backed out installed wifix, and dialed *#93439# it engaged and still nothing changed. Now on both this and ics i input my ssid and wep key for my home router just to try and help out but just said not in range. If i dont put that in, ice just says turning wifi on... then off then on etc..., on gigerbread it says scanning. So im stuck on what to do the only thing i havent tried far as i know (which is very little) is to flash to the interal mem.
On gingerbread you don't need the WiFix.. uninstall it.
if it says scanning, that means it's working.
Hi all. In advance, please don't flame me. I am new to Android, and don't understand all of the technical jargon. I have a problem that I hope will be a simple fix - if there is an answer already on the forums perhaps someone can point me in the right direction.
I was given a Samsung S4 by a friend that works for Samsung. Apparently it was some kind of demo model or something - typically given out for promotional purposes (which may or may not be relevant). The phone is factory unlocked. It is running on the AT&T version of the firmware. Here is the "About Device" info:
Model #: Samsung-SGH-I337
Android version: 4.2.2
Baseband ver: I337UCUAMDB
Kernal ver: 3.4.0-440216
My problem: I cannot update firmware. I tried OTA and via Samsung Kies. When I try OTA, it searches for an update (and finds one available), but then says that the update was interrupted and I there is no update available - try again in 24 hours (GRRR!). When I try to update via Kies, it finds the update and goes through a lengthy download process. Once it begins to install it (my screen goes black and green characters flash on the screen - so apparently it is trying to install the new firmware) - it hangs. Eventually I get a message stating that the update failed (or something along those lines) and I need to do emergency recovery. When I start emergency recovery it just hangs....eventually I just restart the phone and it is right back to normal.
I have tried this process 6 or 7 times-no luck. I really want the recent update, which allows moving apps to SD. Again - I am new to Android-everything. I understand that I likely need to manually install a ROM package - if someone could point me toward some step by step directions I would REALLY appreciate it. Thanks in advance for your help!
-TJ
To try to update more often, try moving the time and date of the phone ahead and try again. If you want to flash ROMS, don't update, because there is no bootloader unlock for it yet
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
r8revealed said:
To try to update more often, try moving the time and date of the phone ahead and try again. If you want to flash ROMS, don't update, because there is no bootloader unlock for it yet
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
Thx for the reply...and for the tip about adjusting the date/time. :good: I am fine with the stock AT&T ROM - but for whatever reason, my phone simply will not update. I tried resetting it - still no dice. If anyone could help me to reinstall the stock or newer AT&T rom manually, I think that would be ideal. Any ideas?
I don't know much about this, but maybe you could flash the stock AT&T firmware again via ODIN. It's basically "unooting" the device, even though your device isn't rooted. it'll wipe all your data and reinstall everything again. I did this often on my S3 but I'm not sure if it's the same for the S4. Maybe someone else would know better because I don't know the .tar files needed for unrooting the S4.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
antjefferson said:
Hi all. In advance, please don't flame me. I am new to Android, and don't understand all of the technical jargon. I have a problem that I hope will be a simple fix - if there is an answer already on the forums perhaps someone can point me in the right direction.
I was given a Samsung S4 by a friend that works for Samsung. Apparently it was some kind of demo model or something - typically given out for promotional purposes (which may or may not be relevant). The phone is factory unlocked. It is running on the AT&T version of the firmware. Here is the "About Device" info:
Model #: Samsung-SGH-I337
Android version: 4.2.2
Baseband ver: I337UCUAMDB
Kernal ver: 3.4.0-440216
My problem: I cannot update firmware. I tried OTA and via Samsung Kies. When I try OTA, it searches for an update (and finds one available), but then says that the update was interrupted and I there is no update available - try again in 24 hours (GRRR!). When I try to update via Kies, it finds the update and goes through a lengthy download process. Once it begins to install it (my screen goes black and green characters flash on the screen - so apparently it is trying to install the new firmware) - it hangs. Eventually I get a message stating that the update failed (or something along those lines) and I need to do emergency recovery. When I start emergency recovery it just hangs....eventually I just restart the phone and it is right back to normal.
I have tried this process 6 or 7 times-no luck. I really want the recent update, which allows moving apps to SD. Again - I am new to Android-everything. I understand that I likely need to manually install a ROM package - if someone could point me toward some step by step directions I would REALLY appreciate it. Thanks in advance for your help!
-TJ
Click to expand...
Click to collapse
I'm not flaming you, I am giving you advice that will help you. Try to use the search function to find answers before posting a question that has already been posted several times. It is possible, the help you need has already been posted in those other threads several times. Also, did you see "similar" threads appear while you were posting your question? Take the time to read those first. It couldn't be easier because they are listed for you. You should also read the "pinned" threads in the "general" section. There is a lot of information there that will help you understand things, if you take the time to read it. If you don't understand the "technical jargon" take some time to learn about it before you do anything to your phone or you are guaranteed to mess it up. If you really don't want future flaming, follow the XDA rules and search for answers first. Good luck.
Hi Guys,
First, I beg of you not to say RTFM on similar questions here regarding this. I have read them, and read them in their entirety. The problem I have is that none of them list how to get me though my issues on my Galaxy Note 3 SM-N900A.
My problem is that I (as many others) really want to upgrade to the Kit Kat OTA released from AT&T a week or so ago. The thing is, I did root my device and as everyone know's this fails any OTA updates.
My question is two fold, but first I would like to explain that I rooted my device NOT for being able to install any custom ROM's. In fact I never had an interest in doing so as I actually like the stock OS's which right now I am still running 4.3. I rooted it specifically to be able to run network / packet sniffers on my own home network as a method to learn a little more about how things go over a network, seeing what I can learn and see if I can find any vulnerabilities. I also used it to try and clean bloat ware and other programs that with out root I can not uninstall or use, such as certain fast reboot apps. So, I really had no intention of using the Root to get me a custom ROM, as I wouldn't even know where to begin.
So my questions are this. Is there anyway that I can "un do" the root in order to let the device act as if it were never rooted? Or, is there anyway to force the OTA regardless of the device being rooted. My biggest fear is losing all the apps and files that I have on my device and I have never been able to get any kind of back up app to work, especially to restore anything from them.
I had read that one can use ODIN to flash the Kit Kat ROM, but while I have installed ODIN on my laptop, I am clueless on how to use it. I tried everything, but even with the USB drivers installed and working (I know this because plugged into the USB port, I am able to browse all the files on my device, yet ODIN continues to tell me that no device has been found.
Can someone please help me to understand what I need to do? Again, I don't care if I lose Root, I care that I don't lose all the stuff I spent months installing and getting my device where I want it. I really need someone to explain somethings to me as if I were a two year old, with out scalding me and making me feel like a complete idiot. I came here because everyone I have talked to told me that you guys would be the ones that could help me, and if you can't, then I am screwed and will have to just wipe the entire device and I just can't do that. I may wind up having to buy a new device and just transfer over what ever I can, however, in the mean time that is not an option.
To this end, I come begging for some serious help since I know you guys are the literal gods of Androids. If I must take some kind of custom ROM in order to get Kit Kat, I am somewhat willing, but I do not fully understand or know what ROM I would want to install as I have never in my life seen a custom ROM and what the benefits of having one are which is kind of why I really want to stick with the stock ROM and just keep getting the updates via OTA.
I have all the faith in the world you guys can help, I just don't know if anyone is willing to help since I know similar questions have been asked, but I do not know how to use what I learned for my particular device.
Thanks very much.
EU
Dardwizzle said:
Hi Guys,
First, I beg of you not to say RTFM on similar questions here regarding this. I have read them, and read them in their entirety. The problem I have is that none of them list how to get me though my issues on my Galaxy Note 3 SM-N900A.
My problem is that I (as many others) really want to upgrade to the Kit Kat OTA released from AT&T a week or so ago. The thing is, I did root my device and as everyone know's this fails any OTA updates.
My question is two fold, but first I would like to explain that I rooted my device NOT for being able to install any custom ROM's. In fact I never had an interest in doing so as I actually like the stock OS's which right now I am still running 4.3. I rooted it specifically to be able to run network / packet sniffers on my own home network as a method to learn a little more about how things go over a network, seeing what I can learn and see if I can find any vulnerabilities. I also used it to try and clean bloat ware and other programs that with out root I can not uninstall or use, such as certain fast reboot apps. So, I really had no intention of using the Root to get me a custom ROM, as I wouldn't even know where to begin.
So my questions are this. Is there anyway that I can "un do" the root in order to let the device act as if it were never rooted? Or, is there anyway to force the OTA regardless of the device being rooted. My biggest fear is losing all the apps and files that I have on my device and I have never been able to get any kind of back up app to work, especially to restore anything from them.
I had read that one can use ODIN to flash the Kit Kat ROM, but while I have installed ODIN on my laptop, I am clueless on how to use it. I tried everything, but even with the USB drivers installed and working (I know this because plugged into the USB port, I am able to browse all the files on my device, yet ODIN continues to tell me that no device has been found.
Can someone please help me to understand what I need to do? Again, I don't care if I lose Root, I care that I don't lose all the stuff I spent months installing and getting my device where I want it. I really need someone to explain somethings to me as if I were a two year old, with out scalding me and making me feel like a complete idiot. I came here because everyone I have talked to told me that you guys would be the ones that could help me, and if you can't, then I am screwed and will have to just wipe the entire device and I just can't do that. I may wind up having to buy a new device and just transfer over what ever I can, however, in the mean time that is not an option.
To this end, I come begging for some serious help since I know you guys are the literal gods of Androids. If I must take some kind of custom ROM in order to get Kit Kat, I am somewhat willing, but I do not fully understand or know what ROM I would want to install as I have never in my life seen a custom ROM and what the benefits of having one are which is kind of why I really want to stick with the stock ROM and just keep getting the updates via OTA.
I have all the faith in the world you guys can help, I just don't know if anyone is willing to help since I know similar questions have been asked, but I do not know how to use what I learned for my particular device.
Thanks very much.
EU
Click to expand...
Click to collapse
does ur kies run? if so turn it off.
USB debugging off? turn it on.
are u in download mode of ur phone? if not, switch off n wait till vibrate to make it really off. then press vol down + home + power. then follow instructions to press vol up once u inside warning screen.
after that u can plug in ur phone.
Sent from somewhere under the sky, at the corner of this rounded earth.
antique_sonic said:
does ur kies run? if so turn it off.
USB debugging off? turn it on.
are u in download mode of ur phone? if not, switch off n wait till vibrate to make it really off. then press vol down + home + power. then follow instructions to press vol up once u inside warning screen.
after that u can plug in ur phone.
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
Hi antique_sonic, I would just like to clarify a couple things as well as answer your questions.
>does ur kies run? if so turn it off. <--- If you mean is it installed on my laptop and work? Yes it is, and yes it does, however, I almost never use it. Mainly because I was told that once you root a Samsung Device, Kies is no longer able to be used.
>USB debugging off? turn it on. <--- It is and has been turned on in an effort to try to sideload KitKat, but that was a hug fail. But I will leave it on for this discussion.
>are u in download mode of ur phone? <---- I have gotten here before but don't exactly know what to do once I am there since I don't know where to get a Kit Kat ROM, where to put it once I have it, or how to use anything in d/l mode.
> if not, switch off n wait till vibrate to make it really off. then press vol down + home + power. then follow instructions to press vol up once u inside warning screen. after that u can plug in ur phone. <--- Are these instructions for wiping the device back to the factory default? Will I lose everything currently installed and loaded on my Note 3? Or does this some how fix / allow for the OTA update to install completely because it no longer can tell the device is rooted?
Again, I must apologize because this is so greek to me.I am just trying to understand at this point what infact the instructions you gave me do, and what they are intended for. Is this just to get the USB drives to work properly? Or is this something that will help me undo root so that I would be able to install KitKat via the AT&T OTA. If now the latter, where I can I get a complete Kit Kat ROM and use ODIN to flash the ROM? This outcome would suck because I believe that this will cause me to lose everything on my device I worked so hard to get where I wanted. I have just over looked the fact that in rooting my device I there by killed my ability to keep my device updated with the latest OTA releases / patches.
Again, I appreciate you reply, but sadly I am in need of a bit more info if you could please.
Thank you so very much. I hope one day to be able to pay it forward, passing along the knowledge you have shared with me,
Regards,
EU
Dardwizzle said:
Hi antique_sonic, I would just like to clarify a couple things as well as answer your questions.
>does ur kies run? if so turn it off. <--- If you mean is it installed on my laptop and work? Yes it is, and yes it does, however, I almost never use it. Mainly because I was told that once you root a Samsung Device, Kies is no longer able to be used.
Click to expand...
Click to collapse
do check, is it running in background ? check your task manager. if so, kill the process. Kies should not run together with ODIN. Otherwise sometimes will give problem to your ODIN process.
I normally only install the USB driver only, as this is the only thing needed to connect your phone to comp (as MTP, or as ODIN connection).
Dardwizzle said:
>are u in download mode of ur phone? <---- I have gotten here before but don't exactly know what to do once I am there since I don't know where to get a Kit Kat ROM, where to put it once I have it, or how to use anything in d/l mode.
Click to expand...
Click to collapse
ok, in a very simple word. download mode is basically a state whereby your phone is ready to download system files and install the system files on your device.
This is the only state possible to get a connection to your ODIN PC to flash stock firmware, recovery (in .tar/.md5 format).
How to get the KK ROM ?
1) identify your device. which model it is. N9005? N900T? N900A? N900 blablabla?
2) goto samfirmware.com (register there if you don't have account. it is free). after that you can just find your firmware by typing on the search device textbox your device model (e.g N9005), and it will come out the list of your device firmware (normally they will show for the latest firmware list)
3) choose the firmware that you want to download (if your device N9005 international 32 gb, try to avoid the Hongkong / Taiwan firmware, as they have different PIT partition).
4) once you have the downloaded zip file from samfirmware, extract the zip, and then you will get the (.tar/.md5) file. Now you can use to flash this one over ODIN.
Dardwizzle said:
> if not, switch off n wait till vibrate to make it really off. then press vol down + home + power. then follow instructions to press vol up once u inside warning screen. after that u can plug in ur phone. <--- Are these instructions for wiping the device back to the factory default? Will I lose everything currently installed and loaded on my Note 3? Or does this some how fix / allow for the OTA update to install completely because it no longer can tell the device is rooted?
Click to expand...
Click to collapse
no. no. no.
This is how to go into download mode in your device
Not yet talking about factory reset.
But yes, you have to backup your internal storage, as sometimes upgrading will cost you to do factory reset, and your internal storage will be gone.
Dardwizzle said:
Again, I must apologize because this is so greek to me.I am just trying to understand at this point what infact the instructions you gave me do, and what they are intended for. Is this just to get the USB drives to work properly? Or is this something that will help me undo root so that I would be able to install KitKat via the AT&T OTA. If now the latter, where I can I get a complete Kit Kat ROM and use ODIN to flash the ROM? This outcome would suck because I believe that this will cause me to lose everything on my device I worked so hard to get where I wanted. I have just over looked the fact that in rooting my device I there by killed my ability to keep my device updated with the latest OTA releases / patches.
Click to expand...
Click to collapse
up to this point, I just remembered that you have N900A (AT&T) version. hahaha.
I go check the samfirmware, no release of KK yet at the samfirmware.
I'm sorry, I own N9005, and I never explore too much on the N900A, so I won't know what is the latest release, and where to get it other from samfirmware.
Dardwizzle said:
Again, I appreciate you reply, but sadly I am in need of a bit more info if you could please.
Thank you so very much. I hope one day to be able to pay it forward, passing along the knowledge you have shared with me,
Regards,
EU
Click to expand...
Click to collapse
no problem. you just get your latest firmware first, once you have it, you let me know, i can give you step by step in detail, on how to flash to your device.
antique_sonic said:
up to this point, I just remembered that you have N900A (AT&T) version. hahaha.
I go check the samfirmware, no release of KK yet at the samfirmware.
I'm sorry, I own N9005, and I never explore too much on the N900A, so I won't know what is the latest release, and where to get it other from samfirmware.
no problem. you just get your latest firmware first, once you have it, you let me know, i can give you step by step in detail, on how to flash to your device.
Click to expand...
Click to collapse
Sure sure, just laugh at me why don't ya!! LOL I will continue to try to find the appropriate firmware. I guess if I learned one valuable lesson in all this, it is just don't root your device if you don't plan on using custom ROM's. I had no idea that there would be no way to "unroot" your device once it's rooted. I was really hoping that you could just undo what ever is done to actually root the device, this way the OTA's will just start working again. Or that there would be a way to just force the OTA regardless of whether the device is rooted. I am not sure I truly understand why the OTA just won't install just because the device is rooted.I mean sure it adds SU to the device, and unlocks (I think) the boot partition or the boot loader, which ever, but regardless, why should the OTA package care and fail to install just because of that change?
Anyway, that's probably a discussion for another thread. I actually did find a Kit Kat zip that is like 150MB's it has a boot.img inside the zip, but it has nothing with an extension that ODIN can recognize. I would love to show you the zip, but it's too large to attach or email. The file name is 2400258.zip, but I forgot where I downloaded it from. It may be what I need to do the job, but with out someone seeing the zip I have no way of knowing if it's the files I need. I was not about to find any files with in it that are in txt readable format for me to say exactly what it is. It does have subfolders names Google and Android and the like but I am sure that is pretty useless with out seeing the full zip.
I will keep my eye on this thread and when I find something I can work with, or if you guys find anything I can work with I will come back and see where we can go next.
Thanks again bud!
Dardwizzle said:
Sure sure, just laugh at me why don't ya!! LOL I will continue to try to find the appropriate firmware. I guess if I learned one valuable lesson in all this, it is just don't root your device if you don't plan on using custom ROM's. I had no idea that there would be no way to "unroot" your device once it's rooted. I was really hoping that you could just undo what ever is done to actually root the device, this way the OTA's will just start working again. Or that there would be a way to just force the OTA regardless of whether the device is rooted. I am not sure I truly understand why the OTA just won't install just because the device is rooted.I mean sure it adds SU to the device, and unlocks (I think) the boot partition or the boot loader, which ever, but regardless, why should the OTA package care and fail to install just because of that change?
Anyway, that's probably a discussion for another thread. I actually did find a Kit Kat zip that is like 150MB's it has a boot.img inside the zip, but it has nothing with an extension that ODIN can recognize. I would love to show you the zip, but it's too large to attach or email. The file name is 2400258.zip, but I forgot where I downloaded it from. It may be what I need to do the job, but with out someone seeing the zip I have no way of knowing if it's the files I need. I was not about to find any files with in it that are in txt readable format for me to say exactly what it is. It does have subfolders names Google and Android and the like but I am sure that is pretty useless with out seeing the full zip.
I will keep my eye on this thread and when I find something I can work with, or if you guys find anything I can work with I will come back and see where we can go next.
Thanks again bud!
Click to expand...
Click to collapse
I don't like spoonfeeding too much actually.
but I find u r quite funny. no offence.
I have no idea this will work or not, but I found this as the 1st search result on Google.
http://www.droidviews.com/install-android-4-4-2-kitkat-ota-on-att-galaxy-note-3-sm-900a/
just have a look first nd don't do anything till u understand the article.
Sent from somewhere under the sky, at the corner of this rounded earth.
antique_sonic said:
I don't like spoonfeeding too much actually.
but I find u r quite funny. no offence.
I have no idea this will work or not, but I found this as the 1st search result on Google.
(I had to remove the link as the website thought I was adding it and gave me a no no warning that I can't post outside links cause I be a newbie!) BAH!!!
just have a look first nd don't do anything till u understand the article.
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
Hey antique_sonic, no offence taken my friend, I am a giant goof ball, but I am also someone who doesn't mind working out my own problems. It's just sometimes with things like this where I am clueless and need a little hand holding. It's nice to know that there are people like you around to help out the dopes like me My apologies for not getting back to you sooner, and I will be looking into the link you sent tonight. I haven't been feeling well lately, I have two herniated disks in my back and I have End Stage Liver disease and I am only 39, so I sometimes get a bit under the weather and am down for the count for a few days. So I do appreciate your patience with me and all the help and direction you are giving me. I try never to abuse the help as that is no way to learn, and learning is actually one of favorite hobbies! Weird huh.... So, I am off to go read the link you provided me and update the stock on my website and hope I make some more sales so I can get some money to buy a new phone when I brick this one! LMAO! Thanks again Sonic, I really appreciate everything!
Dardwizzle said:
Hey antique_sonic, no offence taken my friend, I am a giant goof ball, but I am also someone who doesn't mind working out my own problems. It's just sometimes with things like this where I am clueless and need a little hand holding.
Click to expand...
Click to collapse
No worries and yeah you should try to find first. by this way, you will learn faster, compare if someone do the spoonfeed.
Dardwizzle said:
It's nice to know that there are people like you around to help out the dopes like me My apologies for not getting back to you sooner, and I will be looking into the link you sent tonight.
Click to expand...
Click to collapse
My pleasure to help. And no worries for late reply, as I will do the same when I busy with my real life job.
Dardwizzle said:
I haven't been feeling well lately, I have two herniated disks in my back and I have End Stage Liver disease and I am only 39, so I sometimes get a bit under the weather and am down for the count for a few days. So I do appreciate your patience with me and all the help and direction you are giving me.
Click to expand...
Click to collapse
you are welcome mate. I'm sorry to read the news about your conditions. I can't say anything about this, but wish you all the best. Don't ever feel down in whichever state you are, just do the best in life, and we will never regret that 1 more day has passed.
Dardwizzle said:
I try never to abuse the help as that is no way to learn, and learning is actually one of favorite hobbies! Weird huh.... So, I am off to go read the link you provided me and update the stock on my website and hope I make some more sales so I can get some money to buy a new phone when I brick this one! LMAO! Thanks again Sonic, I really appreciate everything!
Click to expand...
Click to collapse
GOOD !!!
go and grab sales, rather than you brick the phone.
Once again, u r welcome mate.
Ok guys, here's the deal. i bought a secondhand s4 which was advertised as a google edition. it has a couple of annoying issues, first i noticed it switching itself off and on. the worst problem with it is that when my battery goes reeeally dead it just bootloops when i have recharged. the only way i can get it back on is to start it in recovery mode (which is clockworkmod v6.0.4.4) then do a factory wipe. so yeah thats a major pain. the s4 itself is a red model and behind the battery it says its a gt-19505, however in the settings on the phone it says its a gt-19505g.
my goal is to install an official firmware if possible that i may be able to update easily, the worry that i have is that i dont know if it would then accept my network as although it appears to run google edition custom firmware it may not once i install something official on it. this may be a nooby statement i know but a noob i am lol.
if its at all possible could i keep the cwm recovery?
and if its any help when i load the other boot loader thingy (with the green android on it) in the top left it says gt-19505, im just sayin cus im sure its vital which ever this phone actually is.
here are as many details as i can give but please ask if im missing anything
ANDROID VERSION 4.4.2
KERNEL VERSION 3.4.0-faux123-KK44-GE-Custom
[email protected]omain #20
Sun Dec 1 02:30:28 CST 2013
BASEBAND VERSION 19505XXUFNA1
BUILD NUMBER KOT49H.S001.131204
also upon booting in the top left it says "kernel is not seandroid enforcing
set warranty bit:kernel"
THANKS FOR YOUR TIME And please tell me where to start as i tried updating it via kies to fix it but it just wont connect, i assume due to custom firmware.
The Google Play Edition S4 devices didn't come in any color but white. Therefore, this is an I9505 with a custom ROM on it. The download mode screen reading GT-I9505 confirmed it.
Since this is an I9505 and not an I9505G, the main question is whether this device will work with your SIM card. For that, simply insert your SIM card and boot the device. If you get signal, you're good. Otherwise you'll have to unlock the device, either by purchasing an unlock code from one of the sites that sells them, or by trying the unlock methods available on the forums.
This will also help answer the question of which stock ROM you can install on the device. If the S4 doesn't prompt you to unlock the device, then you can install one of the unbranded S4 ROMs available on sammobile.com. After that, you can put the recovery of your choice on the S4, though I recommend TWRP over the other options.
Thanks for your help. I'm a little confused though, at the moment with this custom google edition ROM it does take my sim, in fact I bet it takes any sim, I heard that was a feature of google play devices. What I meant was after I install the stock ROM will it then not take my sim. So if it has already been unlocked How would I know which ROM to install? As I now know its not a google edition, is it possible to install an official google edition ROM? Do i use this download mode, Odin, or cwm to install a firmware. I'm just not sure what my starting point is. I don't wanna follow someone's guide yet to installing something just in case I'm jumping the gun and need to uninstall this custom ROM somehow.
Sorry for asking questions that I'm sure seem dumb I'm really just trying to learn at the moment I'm green as they come with android. BTW thanks for your suggestions so far, you def seem like you know what you're talking about, cheers
Google Play devices are carrier unlocked, but this is not a Google Play Edition S4. Therefore the device was carrier unlocked at some point in its past. The unknown here is how the original owner unlocked the device. If he or she used the unlocking methods found on XDA there is a chance the lock will be lost when installing a stock ROM.
If the S4 is unlocked, you aren't restricted to a particular region and can install any I9505 ROM using Odin, though I recommend the carrier unbranded ROMs. You cannot install a stock Google Play Edition ROM on the device as the model number of a GPE device is not the same as the device you have. However, you're already rooted and have a custom recovery installed. In I9505 Development here on XDA there is a Google Play Edition ROM that can be installed on your device. Download it to your S4, wipe everything in recovery, then flash the ROM's flashable zip in recovery. I've used said ROM and it works quite well.
OK I have found the 5.0.1 ge ROM , but in there it says I must use latest recovery or whatever plus it recommended one different to mine, is it safe to install using my version of cwm or do I need to learn how to change it??
Deleted by user
TWRP is recommended as there are people who are still maintaining it, unlike Clockworkmod and Philz. While you probably can get the ROM installed using the version of Clockworkmod you have, learning how to change recoveries is useful.
OK thank you for all your help my friend, I will now find out how to do this, I'm sure there is a section on this somewhere, BTW I think you are right about my device being rooted, but I wanted to check and I followed a guide and used super su but apparently its not rooted so I guess something must've gone wrong. Bit scary if I try to change my recovery or my firmware and this causes a brick hmmmmm
It's virtually impossible to brick the S4, especially as the recovery is flashed through Odin.
Phew that's a relief. Thanks man.... Well I'm gonna just risk using cwm for now as I'm new to this........ Thanks a whole lot for your time I really mean that.
KlLLFRENZY said:
Phew that's a relief. Thanks man.... Well I'm gonna just risk using cwm for now as I'm new to this........ Thanks a whole lot for your time I really mean that.
Click to expand...
Click to collapse
Use TWRP. CMW is outdated.
Lennyz1988 said:
Use TWRP. CMW is outdated.
Click to expand...
Click to collapse
I want to, I really do but I'm struggling here. Before I wrote that last comment I tried to find a guide on this forum for swapping to twrp, but couldn't and didn't wanna bug this guy as he had helped enough. Anyway I went to the place he told me and have hit another wall anyway because I don't know how to use the firmware the relevant kernel or the git. My life is so busy and I'm getting about an hour on this subject a day and its gonna take forever lol
If you can help me on my way even a little its much appreciated, I would like to use twrp and the 5.0.1 ge plus the right kernel of course
KlLLFRENZY said:
I want to, I really do but I'm struggling here. Before I wrote that last comment I tried to find a guide on this forum for swapping to twrp, but couldn't and didn't wanna bug this guy as he had helped enough. Anyway I went to the place he told me and have hit another wall anyway because I don't know how to use the firmware the relevant kernel or the git. My life is so busy and I'm getting about an hour on this subject a day and its gonna take forever lol
If you can help me on my way even a little its much appreciated, I would like to use twrp and the 5.0.1 ge plus the right kernel of course
Click to expand...
Click to collapse
https://twrp.me/devices/samsunggalaxys4internationalqualcomm.html
Follow the Odin guide. It's excactly the same when you flashed CWM.
@Lennyz1988: The S4 was bought secondhand and already had CWM on it from the original owner.
@killfrenzy: Follow the guide Lenny mentioned, but don't worry about the second paragraph. Our device isn't one of those that restores the original recovery on boot.
ok will do, i just tried the app install method but as i suspected, it said root is required for this app and promptly exited so i shall do the odin method, i heard that some people remove root or it could be that it was done wrong. also after reading a few posts here and there i found out that someone had similar issues with their phone random re-booting and they had custom ge with the wrong kernel so it seems once im done my issues should be history if i learn how to install fw + kernel, after this twrp thing i will be one step closer for sure. i also know ppl slate lollipop but once im all done with this im sure i will have picked up enough terminology to install cfw's to my hearts content. hooray for forums and people like you, sounds like im kissin ass but its just gratitude
so using the twrp install guide i gotta install using the odin method i have now got 3.07 odin but this is the next step.........
Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
lololol nothins ever simple i see the list of tar files in the link above but no mention at all as to which is the proper .tar for my device, i guess they assume the guide is for people who have done it before. more research tomorrow maybe i gotta be up early ugh
Lennyz1988 said:
https://twrp.me/devices/samsunggalaxys4internationalqualcomm.html
Follow the Odin guide. It's excactly the same when you flashed CWM.
Click to expand...
Click to collapse
Think you misunderstood, I have flashed nothing yet I got it like this. I'm completely green
Don't suppose anybody knows which is the tar file for my device?? S4gt-19505
OK now I get it, the list of tars in that section are all the same just newer builds of the same version. Seems obvious if you have done this before, but I wasn't to know that and cannot assume things. I'm also gonna guess and say Lenny thinks my s4 needs this particular version for an international, am I right?? Anyway it would've made a lot of sense but how does he know. I have no idea what this phone was I have never owned it new.
Different devices have different codes. For example, jfltexx is the I9505. A T-Mobile S4 would be jfltetmo, and so on.The link Lenny provided is for the I9505. Download the 2.8.6.0 version as its the latest.
As to how you were supposed to know, having never owned one, you weren't. There are tutorials in the General forum though that can help.