Database Users

O2 XDA on a Blackberry Enterprise Server 4.0 SP3 BBConnect.

***Applies to BES with Microsoft Exchange server. Should work with anything though. ***
**** Backup your Device I did not lose any info but you may. ****
Hello All,
Just thought I would post this to help anybody out there that wishes to use a XDA to connect to a BES 4.0 Server.
Goto your BES server and add the user from the global address list.
Right, First of all you need to unlock the Handset using the software found on this site.
You will then need to phone up vodafone and get a Sim card that is Blackberry enabled (Enterprise version V.Important to connect to BES) also need a spare licence for you BES but I was told by a voda engineer that this does not matter it is only your conscience that should make you buy the CAL (Client Access licences). I am fully licenced by the way.
Uninstall blackberry connect on the XDA then stick in your Vodafone sim card.
Go into system and reinstall it. It will ask you if you want your calender sync'd and a few other question but click straight through.
Delete the Pairings on active sync and then sync the xda with the computer.
Download and install the Blackberry active sync configuration tool.
Make sure the XDA is in the cradle and go into the configuration tool.
Click the connect button down the bottom. This will go off and tell you BES server its PIN code which will be very different from your normal Blackberries. It will also ask you to do the wireless calender update(Delete) on device. This is o.k.
Active sync may want to sync at the same time. Let it do it. Go a make a cup of tea as if you have a busy calender it will take a while.
Once this is done take your XDA out of its cradle and the click on the blackberry connect icon.
Things to check.
* You have Blackberry {ALP} , {CICAL} and {CMIME} in the service.
* Click on CMIME and goto the Sync tab. Tick the Enable wireless syncronisation and change to mailbox wins and delete on mailbox and handheld.
* Check that the tickbox on wireless calender
This should be it. Any questions? Repost and I will give you any help I can.
Oh Vodafone only support BBConnect on the Nokia communicators (and one other) at the moment but I know it works on XDA's.
Going to call vodafone data support and tell them the good news.
Bannywhey.

cant connect
hi
can you please let me know the version of the following you are using
activesync
blackberry activesync configuration tool.
i have an xda2s witha blackberry enterprise chip.did what you said as the necessary steps.
i can see that my connection is activeboth at vodafone and blackberry.net but the BES server is not recognising my pin.
in services i hv Cical and cmime.but cant change any setting on CMIME...
no service book.
tried to ask our admin to push it.
doesnt work.
what could be wrong ?is there something i am missing should reload blackberry connect software ?
i hva wwe 1.40 version
Cheers
Sudhir

Nice document - thank you!
One question. When you say ...
Uninstall blackberry connect on the XDA then stick in your Vodafone SIM card.
Go into system and reinstall it. It will ask you if you want your calender sync'd and a few other question but click straight through.
Click to expand...
Click to collapse
How exactly do you re-install it? From the Extended ROM?
Thanks,
Nigel

Trinity and Blackberry Connect

Hello,
Can I use the Trinity as a Blackberry like I´m doing it right now with the HTC TyTn? Can i use the same Software (Blackberry Connect) as the TyTn?
Thanks for any help!
Best Regards
Giovanni

I installed the BBConnect client on my Trinity but it doesn't work.
The PIN remains in "pending" state.
I'm on TIM network, the SIM works fine on a blackberry handset.

I installed the BB connect for the tytn on my Trinity everything installed fine but for some reason it connects for 3 sec and then disconnects it also doesn't register on the network even though i was able to generate a pin... the i.p adress is shown for 3 sec and then dissapears. i have been trying to find a solution for the past week but no success... i hope somone has the answer.

Sirs,
any news about trinity and blackberry connect?
anyone is experiencing a success?
please let me know
j

....
Hi all,
I'ma trying the same, installing in may HTCP3600 the service does not start and remains stopped.
Anyone one could get it?
Best Regards

HI i am using bbconnect on my trinity and it works fine first you have to get the program from dopod (will try to have link) ...i remember someone posted it here.... it is different program from the bbconnect for the tytn.
you have to log on to your blackberry account and try changing handhelds if it doesnt work than you have to ask your operator to cancell your previous account (if you have it on the tytn) and then reactivate it again with trinity bieng your first mobile to register. and it should work fine
http://rapidshare.com/files/23772366/BBConnecttrinity.exe.html

Almulatham said:
HI i am using bbconnect on my trinity and it works fine first you have to get the program from dopod (will try to have link) ...i remember someone posted it here.... it is different program from the bbconnect for the tytn.
you have to log on to your blackberry account and try changing handhelds if it doesnt work than you have to ask your operator to cancell your previous account (if you have it on the tytn) and then reactivate it again with trinity bieng your first mobile to register. and it should work fine
http://rapidshare.com/files/23772366/BBConnecttrinity.exe.html
Click to expand...
Click to collapse
Thanks Almulatham!!
We have a BES server in our company, I'll try it tomorrow.
I'll give you news ASAP.
Diego.

dear all,
I was unable to download the file from rapidshare for unknown reason it's continuing say me that I have exceed the download limit, but I have not download anything from that site by months.
Could some one send me the mentioned file in another way?
may you please explain how can I get a bb account? If I remember right during the registration process it ask you insert (bb) IMEI and PIN, what information I have to insert?
thank you very much
j

For rapid share
Click the free button and wait for the specified time. (use refresh button)
or pay the premium price
First you have to get a bb account from your telecom provider. Then install the bbconnect program.
once installed click on the calender sync. Then click the utility icon and press the regestration button.
The regestration button should automatically detect your pin and imei plus your ip adress.( you should recieve conformation of the registration) and you are all set to go.
you can get the pin and imei through a program called bbconnect desktop tool for manual installation.

Thanks Almulatham!!
We have a BES server in our company, I'll try it tomorrow.
I'll give you news ASAP.
Diego.
Click to expand...
Click to collapse
Hi Again,
I've try the soft but although the service is started, is no connected, my main problem is that i'm not able to configure my enterprise mail settings because in tab utility "Email Setup" option is in grey.
I suppose that if I would have BB Desktop manager for pocket PC software it could be easy to set up.
We also have tried to do it in our BES Server but is impossible to assign a PIN CODE to a user or edit the actual PIN CODE.
any ideas???
Thanks in advance....

I need...
Hi,
To finish configuration of my BBConnect Soft in my HTC I need this:
BlackBerry® Connect™ Desktop Tool (For BES users) It colud be downloaded if I had a user/pass but I have not
Someone colud send me?
Thanks A LOT!!!!

Dear Almulatham,
thank you very much for your valuable info.
I've downloaded the software, installed it on trinity, create the blackberry account, and added the e.mail address I need to be syncronised.
It created a sort of folder named systema where I received a message with subject "Registrazione" and containing "Il palmare è stato registrato tramite la rete wireless".
And now??????
my internet connection is on but I'm not receiving any message.
Could you please explain me what I've to do.
thank you very much
j

HI regarding the BES server i am not sure what to do as i am using the individual account... and not sure how it works...but if you had registered a previous avvount you might have to delete it first and reregester again.... i will put the link containing the bbconect desktop utility that will help create the imei and the pin....
http://rapidshare.com/files/23986631/ActiveSync_BBConnect_Desktop_Setup_2.1.1.21.exe.html
To jus_mi i am not sure what the language was but from what i understood is you got a file called system and you got a message saying regestration.
that means you have registered on the network and your phone is ready for use. you have to go to bbconnect --utility --email setup.... that will close your bb connection and open internet explorer on gprs. from there you have to register as a new member , once registered you can add your email adress and start recieving emails instantly.

thank you Almulatham,
I found the problem, but needed for your kindly help for the solution.
In the utility window the field configure email accont is grey and not cliccable.
any suggestion?
thanks a lot
j

jus_mi said:
thank you Almulatham,
I found the problem, but needed for your kindly help for the solution.
In the utility window the field configure email accont is grey and not cliccable.
any suggestion?
thanks a lot
j
Click to expand...
Click to collapse
Hi jus_mi,
I had the same problem, and I hope that tomorrow could be fix with BB Desktop for Windows Mobile.
I'll keep you informed.

Almulatham said:
HI regarding the BES server i am not sure what to do as i am using the individual account... and not sure how it works...but if you had registered a previous avvount you might have to delete it first and reregester again.... i will put the link containing the bbconect desktop utility that will help create the imei and the pin....
http://rapidshare.com/files/23986631/ActiveSync_BBConnect_Desktop_Setup_2.1.1.21.exe.html
To jus_mi i am not sure what the language was but from what i understood is you got a file called system and you got a message saying regestration.
that means you have registered on the network and your phone is ready for use. you have to go to bbconnect --utility --email setup.... that will close your bb connection and open internet explorer on gprs. from there you have to register as a new member , once registered you can add your email adress and start recieving emails instantly.
Click to expand...
Click to collapse
Almulatham thanks again,
I'll test it tomorrow.
Bye.

Hi regarding the grey email setup... you have to first register on the network first (register now icon) you should get a registration confirmation on your message files.
once you have the confirmation you can use the email setup function. Once the email is setup you should get another confirmation for the same.
To make sure you are conected in the STATUS icon on bbconnect you should get network available or connected. And on the IDENTITY icon you should get the pin# + IMEI# + IPadress.
I think it is important that if you had a pervious handheld with bbconnect that you have to delete your previous account and reactivate a new one then you can register... because i personnally couldn't change my bbconect from tytn to trinity until i did the above.

If you get signed up for BB service on cingular, you no longer can use 3g, is that right?

i am not sure how it is on cingular but i am using both 3g and blackberry connect... i think blackberry uses a special gprs connection that is different that the regural gprs and i think it has nothing to do with 3g network.

Almulatham said:
i am not sure how it is on cingular but i am using both 3g and blackberry connect... i think blackberry uses a special gprs connection that is different that the regural gprs and i think it has nothing to do with 3g network.
Click to expand...
Click to collapse
Hi Everyone,
Almulatham, I've have test your procedure in ou BES Server. First I've installed BB Connect for Windows Mobile on my desktop and I have review that my PIN has the same that Desktop Applicaction. Afeter this we have deleted the BES account and create again, but I can`t connect. During 1 or 2 seconds I have IP but it disappears almost inmediatly.
I do not how to test more things.
any ideas?
Thanks in advance!

HTC HD2 ( Blackberry Connect 4.0 )

I would like to run the Blackberry Connect 4.0 Software on my HTC HD2 witrh Winmo 6.5
My Service provider in India Vodafone says they are not sure if it will work
HTC Service center says < no HTC phone support Blackberry ??? LOL
Please advice me if I can use the Blackberry sevrice on the HTC HD2 to recive & Send Emails
I curse my self why I didnd buy a blackberry phone & tried my stunts with a winmo
Please advice

ayr_ray said:
I would like to run the Blackberry Connect 4.0 Software on my HTC HD2 witrh Winmo 6.5
My Service provider in India Vodafone says they are not sure if it will work
HTC Service center says < no HTC phone support Blackberry ??? LOL
Please advice me if I can use the Blackberry sevrice on the HTC HD2 to recive & Send Emails
I curse my self why I didnd buy a blackberry phone & tried my stunts with a winmo
Please advice
Click to expand...
Click to collapse
Not available for WinMo 6.5 esp. an HD2 working addon.
I suggest you use Microsoft Exchange for the time being.

"esp. an HD2 working addon." ??
are you working on an add on ?
will a registry hack permit intallation and running of Balckberry connect 4
I tried contacting blackberry , but they requested we contact service provider
I belive there is some hot fix for some HTC devices by hacking the Registry
Will it work with HTC HD2
Please advice , I am desprate to make it work

Nope Im not working on one as RIM usually provides the solution and chefs take that one solution from a particular ROM and modded to make it compatible with other devices. It seem RIM hasn't created a WinMo 6.5 compatible BB Connect app.

ayr_ray said:
I would like to run the Blackberry Connect 4.0 Software on my HTC HD2 witrh Winmo 6.5
My Service provider in India Vodafone says they are not sure if it will work
HTC Service center says < no HTC phone support Blackberry ??? LOL
Please advice me if I can use the Blackberry sevrice on the HTC HD2 to recive & Send Emails
I curse my self why I didnd buy a blackberry phone & tried my stunts with a winmo
Please advice
Click to expand...
Click to collapse
Despair no more. I have it working (see my signature!)
This is what you do:
BEFORE INSTALLING Blackberry Connect you do the following:
* Use a registry editor and change the AKU to .1.6.3 (HLMK\System\Versions) --> Please note the leading dot before the number 1.
With AKU .1.6.3 you will get email but not the Blackberry browser, i.e. Internet Explorer using the Blackberry Internet connection, but believe me: You don't need that.
Resco Registry Editor (not free) is a good choice, but there are others.
* Create a new String registry entry under HLKM\Init called Launch130 and set its contents to SetModelID.exe (Case SeNsiTive!!!)
* Copy/Paste SetModelID.exe to the Windows folder in your Phone
* You can find SetModelID.exe here: http://forum.xda-developers.com/showthread.php?t=520413&page=4
* SetModelID will trick BB Connect into thinking you have a different phone.
* Install BB Connect 4.0.0.106 (It will soft reset after the initial configuration/installation)
* You can get BB Connect 4.0.0.106 from http://www.sems.org/entry.asp?entry_id=338
* After reboot, you may see a window with an error message about security failed or something like that. If you get that, you won't be able to run Enterprise Activation. That means that the BB Security Service couldn't start. That's a timing issue found with Windows Mobile 6.5.X.
To make that service start you need Task Manager v3.1 from FdcSoft. Start Task Manager and go to Services and press on restart service (icon at the bottom). Task Manager will seem to lock up for a few seconds. Be patient. Once BB Security Service is running you can continue with Enterprise Activation.
* Run the Wireless Enterprise Activation process (No need for BB Desktop Manager)
* Remember that your BES Administrator must set your activation password in your BES Server and of course, you have to have the Blackberry Service from your wireless carrier.
Questions? Let me know how it goes.
Good Luck!!!

Hi Miscom
I own an HD 2 , I belive you own an HD
I tried all that you Said
a) Changed the AKu Value to .1.6.3 from the original .5.0.82
b) Created a Registry String : HLKM\Init called Launch130 set value to SetModelID.exe
c) Copied the file SetModelID.exe to the windows folder
d) Installed BB Connect 4.0.0.106
but I did not get Security failed as suggested by you
my HD2 booted and the BBC SHowed my IMEI but said pin Pending
I have the Task manager 3.1 as said by you but the BB Service doesnot show as stoped
The Task Manager Services Shows Black Berry Security (BBDO
A system folder was created in the Mails Folder ???
but no Black Berry Connect
When I click Black Berry It shows BlackBErry Lock Device
The Black Berry Security Settings
How can I confirm my Black BErry Connect Service is working
How can I configure my Accounts
Why does Black BErry icon lead e to a screen with a lock with the name black berry Lock
Will your efforts work on HTC HD2 LEo Running ROM VErsion 1.48.720.2
If I have failed do I need to revert the changes to the originals to prevent further problems
Thanks in advance

miscom said:
Despair no more. I have it working (see my signature!)
This is what you do:
BEFORE INSTALLING Blackberry Connect you do the following:
* Use a registry editor and change the AKU to .1.6.3 (HLMK\System\Versions) --> Please note the leading dot before the number 1.
With AKU .1.6.3 you will get email but not the Blackberry browser, i.e. Internet Explorer using the Blackberry Internet connection, but believe me: You don't need that.
Resco Registry Editor (not free) is a good choice, but there are others.
* Create a new String registry entry under HLKM\Init called Launch130 and set its contents to SetModelID.exe (Case SeNsiTive!!!)
* Copy/Paste SetModelID.exe to the Windows folder in your Phone
* You can find SetModelID.exe here: http://forum.xda-developers.com/showthread.php?t=520413&page=4
* SetModelID will trick BB Connect into thinking you have a different phone.
* Install BB Connect 4.0.0.106 (It will soft reset after the initial configuration/installation)
* You can get BB Connect 4.0.0.106 from http://www.sems.org/entry.asp?entry_id=338
* After reboot, you may see a window with an error message about security failed or something like that. If you get that, you won't be able to run Enterprise Activation. That means that the BB Security Service couldn't start. That's a timing issue found with Windows Mobile 6.5.X.
To make that service start you need Task Manager v3.1 from FdcSoft. Start Task Manager and go to Services and press on restart service (icon at the bottom). Task Manager will seem to lock up for a few seconds. Be patient. Once BB Security Service is running you can continue with Enterprise Activation.
* Run the Wireless Enterprise Activation process (No need for BB Desktop Manager)
* Remember that your BES Administrator must set your activation password in your BES Server and of course, you have to have the Blackberry Service from your wireless carrier.
Questions? Let me know how it goes.
Good Luck!!!
Click to expand...
Click to collapse
Thank You but Do Not Work with my HD2 Leo I do all your issues and nothing still IP pending and not connect??? My OS version is 5.2.21869 Manila version 2.5.19211619.0 and the important thing my ROM version is 1.48.412.2 (71294) ESN Radio Version 2.05.51.05_2. Any suggestion??
Any way thank you for your ideas nad trying

ayr_ray said:
Hi Miscom
I own an HD 2 , I belive you own an HD
I tried all that you Said
....
but I did not get Security failed as suggested by you
my HD2 booted and the BBC SHowed my IMEI but said pin Pending
I have the Task manager 3.1 as said by you but the BB Service doesnot show as stoped
The Task Manager Services Shows Black Berry Security (BBDO
A system folder was created in the Mails Folder ???
but no Black Berry Connect
When I click Black Berry It shows BlackBErry Lock Device
The Black Berry Security Settings
How can I confirm my Black BErry Connect Service is working
How can I configure my Accounts
Why does Black BErry icon lead e to a screen with a lock with the name black berry Lock
Will your efforts work on HTC HD2 LEo Running ROM VErsion 1.48.720.2
If I have failed do I need to revert the changes to the originals to prevent further problems
Thanks in advance
Click to expand...
Click to collapse
I think we are on the right track. Yes, I have an HD but that procedure works on Windows Mobile 6.5.X regardless of device.
You say that it says PIN pending, but did you get an IP Address? If so, BB Connect is working properly. For the PIN Pending issue read on:
Not getting the security failed message is a good thing. It means that BB Connect was able to initialize all of its services with no issues; and that's why Task Manager is showing it as started already!
That said, there will be times when it won't be able to do it after a soft reset and that's when Task Manager comes in handy.
As part of the installation a system folder (or new account) will be created.
Once BB Connect initializes it will talk to your Wireless Carrier to register itself in the network. If the registration is successful you will find a new email in the system mailbox saying something like your device has been registered to the network.
At this point there are a few things we can try:
1. Go to Settings --> System --> Blackberry
a. Once Blackberry loads, scroll to the right until you are in the Utility Tab
b. Tap on Register Now.
c. After a few seconds you should receive an email in the System Account saying that your device is registered in the network.
This is critical because that registration sends to your device the host routing table and the service books from RIM and your carrier so that your device is correctly provisioned to get Blackberry email.
If after registration you don't get the email in the system account or you don't get PIN it could mean one or more of the following issues:
1. Besides having a data plan with your wireless carrier, do you also have a Blackberry Plan for PDA? (Blackberry Plan for PDA is what AT&T calls it in the USA. If you don't have it, BB Connect won't work)
2. Has an account being provisioned in the BES Server in your organization?
If not you need to ask your BES Administrator to provision one for you.
If yes, you need to ask your BES Administrator to assign an activation password to your account.
After yout BES Administrator assigns the Activation Password to your BES Account, in your device you do the following:
Settings --> System --> Blackberry
Go to the activation tab
Enter your BES Server email account and activation password
Tap on Activate.
If all goes well, after a few minutes (be patient), the activation process will finish and you will start receiving emails in your BB Account.
Let me know how it goes.

v1zca1n0 said:
Thank You but Do Not Work with my HD2 Leo I do all your issues and nothing still IP pending and not connect??? My OS version is 5.2.21869 Manila version 2.5.19211619.0 and the important thing my ROM version is 1.48.412.2 (71294) ESN Radio Version 2.05.51.05_2. Any suggestion??
Any way thank you for your ideas nad trying
Click to expand...
Click to collapse
v1zca1n0,
Please read my previous post.
Do you get an IP Address?
Settings --> System --> Blackberry (Status Tab).
Are you provisioned with your Wireless Carrier for Blackberry Connect?
Have you been provisioned in your BES Server?

v1zca1n0,
Something comes to mind and this may sound a bit strange but...
Sometimes Wireless Carriers won't activate your BB Connect service if your device's IMEI number is not in the list of devices that support BB Connect, in this case in a Leo.
The way to trick them into doing this is to insert your SIM Card into another device that is supported by the Carrier with BB Connect (ATT Fuze in my case). Install BB Connect and activate it. It should go through with no issues.
Once your SIM Card is registered as a valid card that can use BB Connect, put it back into your device, install BB Connect and you should be good to go.
I know that this sounds like a long shot, but I did it once a year ago to get my ATT Fuze with BB Connect because at that time the Fuze was not supported by AT&T with BB Connect but I had a Tilt and that one was supported.
And now I am using that same SIM Card with an HTC T8285 (Telstra Australia) in the AT&T Network with BB Connect.
Saludos,

miscom said:
v1zca1n0,
...
The way to trick them into do it is to insert your SIM Card into another device that is supported by the Carrier with BB Connect (ATT Fuze in my case). Install BB Connect and activate it. It should go thorugh with no issues.
Once your SIM Card is registered as a valid card that can use BB Connect, put it back into your device, install BB Connect and you should be good to go.
I know that this sounds like a long shot, but I did it once a year ago to get my ATT Fuze with BB Connect because at that time the Fuze was not supported by ATT with BB Connect but I had a Tilt and that one was supported.
Saludos,
Click to expand...
Click to collapse
Hi,
I tried that as I have the BBC activated on RAPHAEL, however when I put it to LEO the PIN is still pending.
Salu2

miscom said:
v1zca1n0,
Please read my previous post.
Do you get an IP Address?
Settings --> System --> Blackberry (Status Tab).
Are you provisioned with your Wireless Carrier for Blackberry Connect?
Have you been provisioned in your BES Server?
Click to expand...
Click to collapse
I do... I am... Yes... but nothing
[Something comes to mind and this may sound a bit strange but...
Sometimes Wireless Carriers won't activate your BB Connect service if your device's IMEI number is not in the list of devices that support BB Connect, in this case in a Leo.
The way to trick them into doing this is to insert your SIM Card into another device that is supported by the Carrier with BB Connect (ATT Fuze in my case). Install BB Connect and activate it. It should go through with no issues.
Once your SIM Card is registered as a valid card that can use BB Connect, put it back into your device, install BB Connect and you should be good to go.
I know that this sounds like a long shot, but I did it once a year ago to get my ATT Fuze with BB Connect because at that time the Fuze was not supported by AT&T with BB Connect but I had a Tilt and that one was supported.
And now I am using that same SIM Card with an HTC T8285 (Telstra Australia) in the AT&T Network with BB Connect.
Saludos,]
I will try but I use to have a diamond 2 (Topaz) untill it break down and no problems at all I was regristed in the BB System and use it with any kind of limits... Whit Leo no is a pity.... Anyway gracias

See this
http://forum.xda-developers.com/showpost.php?p=5237897&postcount=69

miscom said:
I think we are on the right track. Yes, I have an HD but that procedure works on Windows Mobile 6.5.X regardless of device.
You say that it says PIN pending, but did you get an IP Address? If so, BB Connect is working properly. For the PIN Pending issue read on:
Not getting the security failed message is a good thing. It means that BB Connect was able to initialize all of its services with no issues; and that's why Task Manager is showing it as started already!
That said, there will be times when it won't be able to do it after a soft reset and that's when Task Manager comes in handy.
As part of the installation a system folder (or new account) will be created.
Once BB Connect initializes it will talk to your Wireless Carrier to register itself in the network. If the registration is successful you will find a new email in the system mailbox saying something like your device has been registered to the network.
At this point there are a few things we can try:
1. Go to Settings --> System --> Blackberry
a. Once Blackberry loads, scroll to the right until you are in the Utility Tab
b. Tap on Register Now.
c. After a few seconds you should receive an email in the System Account saying that your device is registered in the network.
This is critical because that registration sends to your device the host routing table and the service books from RIM and your carrier so that your device is correctly provisioned to get Blackberry email.
If after registration you don't get the email in the system account or you don't get PIN it could mean one or more of the following issues:
1. Besides having a data plan with your wireless carrier, do you also have a Blackberry Plan for PDA? (Blackberry Plan for PDA is what AT&T calls it in the USA. If you don't have it, BB Connect won't work)
2. Has an account being provisioned in the BES Server in your organization?
If not you need to ask your BES Administrator to provision one for you.
If yes, you need to ask your BES Administrator to assign an activation password to your account.
After yout BES Administrator assigns the Activation Password to your BES Account, in your device you do the following:
Settings --> System --> Blackberry
Go to the activation tab
Enter your BES Server email account and activation password
Tap on Activate.
If all goes well, after a few minutes (be patient), the activation process will finish and you will start receiving emails in your BB Account.
Let me know how it goes.
Click to expand...
Click to collapse
Kindly i've followed the installation procedure
but still the name of the device hasn't changed...
my device is HTC jade (touch3G)

Yeah tried it, and I can confirm it..
BBC and BAS couldn't work with HD2 yet..
I got my pin in my X1 but couldn't even connect to the network in HD2.. well it connected for a while.. then it disconnected it self..

kindly i would appriciate a feedback who had tried it on HTC-Jade (Touch 3G) & it worked for him.
was there any tricks to get it work?
i added the reg key "launch130" & added the "SetmodID.exe" in windows folder & running it manually. I installed the bbconnect, & after restrarting the device there was no error, & the application started smoothly. but as for the device name in BBC wasn't changed it's always HTC-Jade. when trying to connect the tunnel & IP address are shown, the PIN=pending....
any comments or suggestions!!!!!!
thank you

anyone????

A possible way to make BB Connect work
Hello all,
I know that the procedure explained in the attached Word document may seem like a long shot; but I think it's worth a try.
I don't own an HD2, but by following this procedure I was able to install and run the Blackberry Application Suite in my Blackstone.
You see, the HTC-BlackStone is not supported by the BAS and an tried many versions of SetModelID.exe and none of those worked, but by changing the Device Model ID in the ROM to HTC-Raphael before flashing I was able to trick BAS and make it install and run with no issues.
If someone wants to give it a try, please let me know whether or not it worked.
I am attaching two files: One is a screen shot of my Blackstone being identified by Blackberry Connect as an HTC-Raphael and the second one is a Word document explaining the procedure on how to change the Device Model ID.

miscom said:
Hello all,
I know that the procedure explained in the attached Word document may seem like a long shot; but I think it's worth a try.
I don't own an HD2, but by following this procedure I was able to install and run the Blackberry Application Suite in my Blackstone.
You see, the HTC-BlackStone is not supported by the BAS and an tried many versions of SetModelID.exe and none of those worked, but by changing the Device Model ID in the ROM to HTC-Raphael before flashing I was able to trick BAS and make it install and run with no issues.
If someone wants to give it a try, please let me know whether or not it worked.
I am attaching two files: One is a screen shot of my Blackstone being identified by Blackberry Connect as an HTC-Raphael and the second one is a Word document explaining the procedure on how to change the Device Model ID.
Click to expand...
Click to collapse
i want to buy the HD2 and need BBConnect. What you have done looks the same as the setmodelid cab that has been floating around for a while. it worked for me on my TP2 but apparantly not on the HD2. I have attached it for reference (and a LEO one someone posted that I have no idea if it works). is what youare doing differnet?

ekerbuddyeker said:
i want to buy the HD2 and need BBConnect. What you have done looks the same as the setmodelid cab that has been floating around for a while. it worked for me on my TP2 but apparantly not on the HD2. I have attached it for reference (and a LEO one someone posted that I have no idea if it works). is what youare doing differnet?
Click to expand...
Click to collapse
Yes, it's different because this change is made to the ROM file before it's flashed into the phone.
I tried all versions of SetModelID.exe I could find and none worked for me when testing Blackberry Application Suite because BAS would always say that I had an unsupported device (a BlackStone).
I don't use BAS but I did all those tests because I suspect that both products, BAS and BB Connect, use the same detection scheme.
So, if someone with an HD2 is willing to test this we would know for sure if BB Connect will work or not.

Exchange with https on HD2 with WP7

Hello,
I've just flashed the WP7-ROM for the HD2... everythings works fine till now, but I cannot connect with Exchange (there is a problem with the certificate).
But my HD7 works fine with the same Certificate... has anyone the same problem... or has anyone get exchange working?

I'm having this problem also. Does anyone have solution for this?

Mine works fine..
Checkout the time of the phone.

funky81 said:
I'm having this problem also. Does anyone have solution for this?
Click to expand...
Click to collapse
Shutdown und restart the phone... after that it works on my hd2

TMo US 3G Not working on HD2 after WP7
Hi Everyone,
I have just flashed my htc hd2 with WP7 rom.
Things are looking good.. the only problem is my tmobile 3g/data connection is not working. Can anyone help me here ?

rdashora said:
Hi Everyone,
I have just flashed my htc hd2 with WP7 rom.
Things are looking good.. the only problem is my tmobile 3g/data connection is not working. Can anyone help me here ?
Click to expand...
Click to collapse
Hi rdashora, under settings, Cellular you need to edit and enter the APN for for your service provider. You may need to search online for the correct string.

Exchange worked fine on my end...i must say that this has to be the best exchange capable Os out there. My work emails render as faithfully as they do on my desktop

Thanks, it works

rdashora said:
Hi Everyone,
I have just flashed my htc hd2 with WP7 rom.
Things are looking good.. the only problem is my tmobile 3g/data connection is not working. Can anyone help me here ?
Click to expand...
Click to collapse
Why have you posted this question in this thread?

Unfortunately, unlike iOS and Android, WP7, like WinMo before it, still does not accept unsigned certificates.
With iOS and Android, you can choose to accept te unsigned cert after viewing a warning. Microsoft still don't allow this.
To get it working you have to setup an email account that works (gmail/hotmail) and email yourself the root certificate for the exchange domain. You can then install on the device from the email. After that, you can now attach to you Exchange server.
It's a bit of a hassle and one that there's really no reason not to support along with the appropriate warnings.

worked data connection
The answer was given,
Enter cellular menu. there, add "APN" option is available. Enter here your own countrymen, the GSM operator information...
I worked very well. but too bad the app to be paid.
I still say android2.3 much better operating system.

Hello:
i have another problem related to exchange the user name name of my account has two word as "name surname". When I tried to configurate my excahnge account I cannot introduce any space on the username field.
Does anybody know any trick to solve the problem?
Any registry key to change where user name is stored? As know the automatic system of WP7 detected my username as the first part of my e-mail address (ex. [email protected] the user name detected is name.surname instead of name surname)
Any trick to force the keyboard to write spaces?
If I do not find a solution I will have to come back to 6.5 as I need my HD2 for work.
thanks in advance for your help.

romperstomper said:
Unfortunately, unlike iOS and Android, WP7, like WinMo before it, still does not accept unsigned certificates.
With iOS and Android, you can choose to accept te unsigned cert after viewing a warning. Microsoft still don't allow this.
To get it working you have to setup an email account that works (gmail/hotmail) and email yourself the root certificate for the exchange domain. You can then install on the device from the email. After that, you can now attach to you Exchange server.
It's a bit of a hassle and one that there's really no reason not to support along with the appropriate warnings.
Click to expand...
Click to collapse
lol, whats all that about, most people set up their exchange email etc with no problems what so ever, i didnt?
kata said:
Hello:
i have another problem related to exchange the user name name of my account has two word as "name surname". When I tried to configurate my excahnge account I cannot introduce any space on the username field.
Does anybody know any trick to solve the problem?
Any registry key to change where user name is stored? As know the automatic system of WP7 detected my username as the first part of my e-mail address (ex. [email protected] the user name detected is name.surname instead of name surname)
Any trick to force the keyboard to write spaces?
If I do not find a solution I will have to come back to 6.5 as I need my HD2 for work.
thanks in advance for your help.
Click to expand...
Click to collapse
That is weird, you say ur username has a space in it? I didnt think that was possible??? I would contact ur IT dept on that one.

Yes, my user name has a space in it. but not just mine also all the rest of my organization. Everybody gets the user name as 'name surname'. I already contact IT department and they told me they will not change nothing for security policy.
I have had 5 windows mobile phone, 3 androids and several symbian and I never got any problem, it was always possible to wirte my user name with the space. :-(

Hi, I'm having the same problem now. I was running either BOYPPCs or HD2Os (i can't remember) NODO rom and I could sync with my companies exchange no problems. However I installed the mango beta yesterday and now I have a certificate error, I tried going back to XBMODs nodo rom and it didn't work either. I know all these roms come from the same base, but could there be different certificates floating around?

"Can't set up your account" HD2 - WP7

Hello there. I have the 25 digit code, and have successfully activated my windows live account on my HD2. But when entering Marketplace, i get this message:
"Either Xbox LIVE or Marketplace for Windows Phone isn't offered yet in your country/region. Please check back later."
What can I do? WP7 is kind of boring without Marketplace access.
NB: I've tried to change my country settings under my windows live ID to USA, from Denmark. But still, same error message.

mooooooa said:
Hello there. I have the 25 digit code, and have successfully activated my windows live account on my HD2. But when entering Marketplace, i get this message:
"Either Xbox LIVE or Marketplace for Windows Phone isn't offered yet in your country/region. Please check back later."
What can I do? WP7 is kind of boring without Marketplace access.
NB: I've tried to change my country settings under my windows live ID to USA, from Denmark. But still, same error message.
Click to expand...
Click to collapse
you have a make a new windows live ID from a country where it is supported. Change your locale to that country in your phone. Log in with your new information (you might have to hard reset), and BAM! it works.

I got the same problem.
I'm from Brazil and have a XBox Live Gold account (from that country).
I make the activation with that account and even the marketplace or xbox live games hub not work.
It's a shame that Microsoft don't make the MarketPlace available WorldWide when not exist in a specific region.
Anyone could make that work with a secondary account (just adding it)? Or have to hard reset?
Damn... i really want to use it with that xbox live account.

Microsoft just answer my question with this event: http://windowsteamblog.com/windows_...er-news-beta-mango-tools-available-today.aspx