Checked this morning, JP5 upgrade is now available. (There was a JP3, JP4, JP5) combination of firmware, I probably picked the wrong one. Once my phone reboots I'll let you know more
Didnt' lose apps or contacts or SMS.
Did nuke my layout for Touchwiz though.
All the apps are sorted alphabetical now
I9000DTJP3
Kernel: 2.6.32.9
Froyo DTJP5
Checked this morning, upgrading now....
Didnt' lose apps or contacts or SMS.
Did nuke my layout for Touchwiz though.
All the apps are sorted alphabetical now
I9000DTJP3
Kernel: 2.6.32.9
Froyo DTJP5
Optus widget is STILL broken
Could any1 port and upload the baseband JP3 modem file to use on other roms. Thanks.
Related
This may be a stupid question, but what is the different between the JI6 update and the 2.1 update1?
I just got a replacement phone from T-Mob and it claims to have firmware version 2.1 update1 but the baseband version is JFD.
Or maybe I'm trying to understand what things are in baseband vs. what is in firmware. I assume one difference is that its easy to change the firmware, but that does not help me much.
Thanks
JI6 is latest and 2.1 update 1 is the old version
I really don't know if there was a pre release version 2.1 (without update 1)...
as far as i know, the very first vibrant came with 2.1 update 1 (or JFD), and that's what you have now.
You should get this updated to JI6...
sandstones said:
This may be a stupid question, but what is the different between the JI6 update and the 2.1 update1?
I just got a replacement phone from T-Mob and it claims to have firmware version 2.1 update1 but the baseband version is JFD.
Or maybe I'm trying to understand what things are in baseband vs. what is in firmware. I assume one difference is that its easy to change the firmware, but that does not help me much.
Thanks
Click to expand...
Click to collapse
There are no stupid questions, only stupid answers....
Eclair 2.1 update1 is the stock ROM that comes pre-installed on the Vibrant.
JFD is the launch version of that firmware.
The newest revision of the Eclair 2.1 update1 is JI6 which, I'm sure you've seen a thread or two about, attempts to fix many of the issues users were having with GPS/Sync/etc. If you realllllly wanted to simplify it, and I know this is completely wrong but follow me here, you have Eclair 2.1 update1(JFD). JI6 would essentially be Eclair 2.1 update1(JI6).
Since you've got a vanilla Vibrant, I'd suggest you charge up your phone and head over to the Kies Mini page to grab the JI6 update. Of course you could also wait for the OTA (over the air) update if you felt like it.
Has anyone thats gotten the update posted what the following versions list?
Firmware Version:
Baseband Version:
Kernel Version:
Build Number:
tommyk38 said:
Has anyone thats gotten the update posted what the following versions list?
Firmware Version:
Baseband Version:
Kernel Version:
Build Number:
Click to expand...
Click to collapse
Firmware Version: 2.1-update1
Baseband Version:T959UVJI6
Kernel Version: 2.6.29
Build Number: ECLAIR.UVJI6
Woohoo!
Looks like the official 2.2.1 is on Kies now. I tried earlier today with Kies v100 but got
nothing, upgraded Kies to v102 and got told I've got a firmware upgrade available!
Downloading now.
I'm on CPW product code in the UK. I haven't done anything to my registry settings or installed the Kies Patcher.
Get Kies v102 from here I don't think older versions will show you anything
Whats the version seen?
Already posted?
http://forum.xda-developers.com/showthread.php?t=885884
Ok, yeah just saw that, but this should also let people know its available for CPW too. If Mods want to delete this thread, I'm fine with it. Cheers
cicer0 said:
Already posted?
http://forum.xda-developers.com/showthread.php?t=885884
Click to expand...
Click to collapse
CPW not mentioned in that thread though.
Tehpriest said:
CPW not mentioned in that thread though.
Click to expand...
Click to collapse
Kindly post the details between the test build JPY and the official Kies released JPY
Any changes have done ?
or its the same ROM which was avialble through reg hack couple of days back?
Is this a diffrent ROM....
Kindly post it
What build details? From the About Phone options under Settings?
It says
Firmware: 2.2.1
Baseband: I9000XXJPY
Kernel: 2.6.32.9 [email protected] #1
Build Number: FROYO.XXJPY
And after dialling *#1234# I get:
PDA: I9000XXJPY
PHONE: I9000XXJPY
CSC: I9000OXAJPY
Build Info: 2010.12
What about *#*#44336#*#* ?
changelog and exact build date?
mine, which I got via Kies reg.hack:
INTERNAL VERSION
VERSION
PDA: I9000XXJPY
Phone: I9000XXJPY
CSC: I9000OXAJPY
Build Time: 2010. 12. 20 15:35:57 KST
Changelist: 757011
cicer0 said:
What about *#*#44336#*#* ?
changelog and exact build date?
mine, which I got via Kies reg.hack:
INTERNAL VERSION
VERSION
PDA: I9000XXJPY
Phone: I9000XXJPY
CSC: I9000OXAJPY
Build Time: 2010. 12. 20 15:35:57 KST
Changelist: 757011
Click to expand...
Click to collapse
Ok, didn't know about that code. Just tried it and looks like its EXACTLY the same!
Good news so no need to re-install then
Looks like it is the same, which is slightly disappointing as I would have hoped they'd addressed the wifi issue that's causing excess battery drain.
Does the product code stay the same of does it change to KOR as it did with the hack?
cydiamante said:
Does the product code stay the same of does it change to KOR as it did with the hack?
Click to expand...
Click to collapse
Mine stayed XEU, used registry hack. Even did a factory reset after upgrade (because product code did change to KOR when i upgraded to JPO and did a factory reset) and it stayed XEU.
I also do not have any draining problem (not because of wifi anyways), the battery is not so good as it was in JPO, but i'm getting 2-2,5 days of normal use and hoping that after some charging cycles it will be better.
XEU phone here, even checked the /efs folder and all references are XEU.
Grabbed Kies v102, installed and checked no spoof in the registry by reading it with registry patcher.
Plug in phone, launch Kies, finds the phone, firmware update - JPX is the latest apparently. What are people coming from? Perhaps it only works on JPO (last official release, right?).
This ROM has serious battery problems, 6 hours on standby with wifi off today and it had died!
That's terrible battery usage. Did you factory reset, clean cache and format internal sd? Running any mods etc? Sounds like there's a problem, and I don't think it's the ROM as most peoples experiences are much better than that. SGS Tools on the market may shed some more light on what is using up the battery for you.
Battery usage (from about phone):
Display: 85%
Cell standby: 7%
Wi-fi: 5% (wtf it's disabled?)
Phone idle: 3%
Have never factory set my phone, tbh the whole point of Android updates is you shouldn't need to. Consider typical user (e.g. non techie) updates via Kies and gets this issue, what then?
I'll backup with Titanium and give a factory reset a try...
what's difference between factory reset and hard reset? which is better after a firmware upgrade?
amwebby said:
Looks like it is the same, which is slightly disappointing as I would have hoped they'd addressed the wifi issue that's causing excess battery drain.
Click to expand...
Click to collapse
Ppl with battery problems, please disable any lag-fix and see how that goes.
I am using stock JPY without any lag-fix and my battery is fine really.
(wifi on all the time)
Same as JPO tbh.
it seem like ppl using darkky's lagfix are having battery problems.
[email protected] said:
Ppl with battery problems, please disable any lag-fix and see how that goes.
I am using stock JPY without any lag-fix and my battery is fine really.
(wifi on all the time)
Same as JPO tbh.
it seem like ppl using darkky's lagfix are having battery problems.
Click to expand...
Click to collapse
No lagfix here, yet terrible battery life
hi
Im looking for my old firmware ASAP
Model # GT-P1000
Firmware - 2.2
Baseband: P1000XXJK5
Kernel ver: 2.6.32.9
[email protected] #1
Build # - Froyo.xwjj7
Where can i find the exact firmware?
Thanks,
Samfirmware dot com is where you can download the JK5. There is a tablet section of the website and you'll find all the available FW. JK5 is still good to download but stay away from AMY JM version if you do not know exactly what you are doing.
P_
Thank you pakalrtb,
Ya i went to that site you mentioned. The thing is that i got P1000XXJK5 from there. But its not the same as i had before. See kernal below / Build.
Baseband: P1000XXJK5
Kernel ver: 2.6.32.9
[email protected] #1
Build # - Froyo.xwjj7
Can you help me please on that?
Thanks again
Hmm, it's strange because the baseband says JK5 and the FW version says JJ7. It's kind of conflicting because the baseband seems to be newer than the FW, and the Kernel "may" belong to the JJ7. How did you get with this combination ?!?!?!
By the way you may want to download from samfirmware the JJ7 and extract the Kernel ( Zimage ) file from there.
P_
Dont know what to tell you.... I got the the the above spec. Only cause i was having problems did i go to the JJ5 (big mistake)
So which of the below should i try? Can i downgrade as well?
P1000XWJJ7 - 2010 October
P1000XWJJ7 ## NEW - 2010 October
P1000XXJK5 ## 2010 November
Can the repair center see if i changed firmwares?
Thanks
I honestly do not understand yr point. JK5 seem to be quite a reliable rom (with the exception of a very laggy browser). You may want to tell what you are trying to fix rather than trying to get a pieces combination that does not even make sense to me. Flash JK5 and your tab should be just fine.
Thanks pakalrtb.
I flashed it to JM6 and everything works. the only thing im missing is csc files.
Can you help me on this pls.
Tx
a quite easy (or actually stupid way) to have ur stock csc back is just use root exploxer to copy /system/csc from a stock un-flashed TAB to ur TAB.
Then press *#1234# and u will get what u want.
I don.t have this as I only have jj3 instead~asia version csc
i hear you. No one has a tab that i know.
I hope you did NOT flash the JM6 from samfirmware, or you'll b stuck with a signed bootloader. Some earlier version of rotohammer jm6 had the problem of a blank pda and csc fields. Make sure that your installation is completed. Put your tab in recovery mode ( power on + vol up ) and it will automatically load the csc files, then reeboot.
P_
Thank
Just downloaded
http://www.androidtablets.net/forum...-firmware-jm6-browswer-fixed-new-widgets.html
Everything looks like t works beside update from readers hub?
I flashed my x10a with the generic 2.1 rom today to prepair for the release of 2.3, but I noticed some new apps that I never had before, namely the moxier apps and some others (quadrapop and some art app) I flashed using the method listed here : http://forum.xda-developers.com/showthread.php?t=920746&highlight=flash+tool and I flashed this version "Generic version 2.1update1 build 2.0.A.0.504 (MD5: F3735BF4D48ED4BBA8BF5BC60CD1D34C)" I was wondering if anyone knows if the other two versions to flash for the x10a don't have any of these apps? I have read the other threads about moxier and I don't really want to root my phone just to get rid of it. I was hoping to stay with the generic firmware and upgrad easily to 2.3 when it comes out.
Could someone that updated SGS2 to KF3 firmware tell me the app version numbers for the stock Email.apk and the Social Hub.apk?
I want to know whether these apps were updated.
Version numbers for apps can be seen in Titanium Backup.
Thank you!
For XWKF3 the version of email.apk is 3.0.0.1 and for the Sosial Hub, 2.00.00001
Great, thanks!
Still the same version numbers, so I guess no changes were made.