Can any body help me to Unlock my T-Mobile HTC Wing / P4350.
What kind of unlock are you trying to do?
CID unlock - software
SIM unlock - carrier
You can HARDSPL to CID unlock your phone.
Unfortunately, there is no SIM unlock option available at this time on XDA. You can either google "IMEI check" and go thru them, or if you have a Tmobile account that's been active for a few months, you can call them and ask them to unlock your phone.
I dont know whether we have to go with CID unlock - software or
SIM unlock - carrier.
Right now I am in US and I want to use the mobile in India
What you have to do is Sim Unlock it, because I'm assuming there is no T-mobile in India...
Now I am in US, I want to use it in India.
Can you please let me know how to SIM unlock my wing.......
call them and ask them to send you the unlock code.'
They'll do it
Right now I'm not with T-Mobile so I can not contact them in unlocking the mobile. Is there any other alternate way to unlock my Wing?
let me get this right
you have a wing but you don't have a tmo sim? what?
Use a paid service. You'll have to know the IMEI number (easy enough)
Recommendations, anyone?
I have a Telus Desire HD.
I used to have a Desire on Telus and was able to purchase an unlock code, worked 1st time.
I have had the Desire HD for about 2 months, want to unlock now.
I purchased unlock code from MobileinCanada, I have purchased unlocks codes in the past from them and they work fine.
The Desire HD I have tried on 4 attempts without success.
Question 1:
How many carrier unlock attempts can be done before device is bricked?
Question 2:
Do I have to root the device in order for carrier unlock to work?
I have already paid for the unlock, I would prefer not to root, any suggestions, I hope someone can answer question 1.
On the screen with the keypad, I get the following message "SIM service provider unlock PIN".
Does this mean the 8 digit unlock code will not work, do I have to input a telus code 1st
Help!!!
Please
I think if you call Telus and tell them you're going to europe for a while, they can provide you with a working unlock code... They've been doing this for a few months now!
Hello mate.
Try following this thread: http://forum.xda-developers.com/showthread.php?t=857537
It should sim unlock your phone, but remember you have to have a build lower than 1.72.405.3 and a specific radio..
Just follow the topic!!
Take care!
Unlock
digao100nocao said:
Hello mate.
Try following this thread: http://forum.xda-developers.com/showthread.php?t=857537
It should sim unlock your phone, but remember you have to have a build lower than 1.72.405.3 and a specific radio..
Just follow the topic!!
Take care!
Click to expand...
Click to collapse
Thank You for the follow up, this looks like rooting the device, I do not want to root it, just want to unlock the carrier unlock
tagme said:
I think if you call Telus and tell them you're going to europe for a while, they can provide you with a working unlock code... They've been doing this for a few months now!
Click to expand...
Click to collapse
I think you have to wait 3 months plus pay $75, most of the unlocker sites are $25.
If the unlocker sites will not work, I may have to resort to calling Telus, I did pay for device outright vs 3yr.
Can you confirm if the fee from Telus is $75?
golfman32 said:
Thank You for the follow up, this looks like rooting the device, I do not want to root it, just want to unlock the carrier unlock
Click to expand...
Click to collapse
You can unroot it back and keep it unlocked by reflashing the original rom.
That is what i was going to say,
Root it run radio S-OFF then run the rru again job done.
Hello
I buy my self new Xperia X8 - locked in UK (O2). But before I try to unlocked, I update it with Foryo v20. Now I want to put unlock code, but I don't find where to write it.
I never try to unlock phone and need some help, please.
What do you mean unlock? can you be more specific?
I mean that I can't use this phone in Bulgaria with other operator.
Is locked for use only with O2.
The problem is that i can't find where to put "unlock code" with Frpyo Rom.
Hmm can u post the unlock code?
I'll figure it out, since i never tried it.
Sent with love!
I registered in the site code, but I see no reason to pay for the code if a can't put it - as per their instructions.
I think I found in stalemate position.
I only need to know how to get to the introduction of the code !?
Regards
Is possible have the site url? i need a code for my italian locked x8
I will try here
Insert a sim card that is not accepted and turn on the phone.
As soon as you power on your phone, you will be asked to enter the SIM Network unlock pin.
ferraripassion said:
Insert a sim card that is not accepted and turn on the phone.
As soon as you power on your phone, you will be asked to enter the SIM Network unlock pin.
Click to expand...
Click to collapse
This happened before the change of the Rom.
Now with Froyo - this option missing, and this is exactly my problem
You can go to the secret menu and enter the code.
hi, sorry i cant understand engish so much, so i couldnt find my answer on the forum. Can anyone tell me how to unlock x8 sim pin code ( 3 mobile) .thanks
I am in the same situation.
I have GingerDX installed, i have change operator, and the unlock code option doesn't appear.
Help!!
Hello guys,
got one atrix at&t 4g in hands right now wich cant accept any sim card. Even the at&t one. Customer told he bought it as unlocked at am usa bestbuy shop and as arrived in home realised it´s locked indeed. As far i can see also to at&t sim card as it asks for network pin. I tried to updated it to [STOCK ROM] Android 2.3.4 Gingerbread 4.5.91 (Safest Update) following xda guide, but it keeps locked also to at&t. N tip or help from someone?
Rgds,
Buy an unlock code perhaps?
i tried
Pat123 said:
Buy an unlock code perhaps?
Click to expand...
Click to collapse
i did it, but the 8-dig unlock code did not work. Will try a 16 dig from a diff supplier. Weird is it should accept at&t sim card. But it doesnot.
im having a bit of a hard time understanding what u mean by the ATT sim not being accepted..if u mean there no signal when u put the sim in, its because ur friend bought it without activating it with an ATT number most likely. In which case a non active ATT sim will not register with the Roaming partners which will show up on ur phone as no service. Get a valid code from a seller such as cellunlock.net i used them and they're code worked perfectly, once u sim unlock the phone then put in a SIM from ur country and it should pick up signal all u have to do then is create a motoblur account or choose to skip that process.
none sim card
djkinetic said:
im having a bit of a hard time understanding what u mean by the ATT sim not being accepted..if u mean there no signal when u put the sim in, its because ur friend bought it without activating it with an ATT number most likely. In which case a non active ATT sim will not register with the Roaming partners which will show up on ur phone as no service. Get a valid code from a seller such as cellunlock.net i used them and they're code worked perfectly, once u sim unlock the phone then put in a SIM from ur country and it should pick up signal all u have to do then is create a motoblur account or choose to skip that process.
Click to expand...
Click to collapse
Thany u for replying...
Sorry man for yr misunderstading. Wht i mean is wht i said: it does not accept any sim card. Neither one from at&t. Then, if i insert an at&t sim card (yep, i have more than 4 of them) phone asks for network pin, just like it asks when i insert other operators sim card, like claro brazil (i.e).
Its regular expected behavior should be accepting, at least, the at&t sim card since it´s from usa at&t. Of course it would not show network signal cos i am outside usa and my at&t sim cards have no credits, but it should not ask for a network pin when a at&t sim card is inserted.
Rgds,
Gingerblur
Hi there Antonio. Had same problem here in Peru. Thanks to Tenfar´s CMW recovery and Gingerblur I managed to make my Atrix work with Claro Peru and Movistar. Just look for them in the development forums.
duvate said:
Hi there Antonio. Had same problem here in Peru. Thanks to Tenfar´s CMW recovery and Gingerblur I managed to make my Atrix work with Claro Peru and Movistar. Just look for them in the development forums.
Click to expand...
Click to collapse
Can you explain what exactly it was that you did to resolve this issue??
up... up...
no success with tenfar´s as suggested by Duvate. N other help pls?
Rgds
8)
sounds like the phone is asking for a SIM Pin or what's known as a PUK Code, which unfortunately if u dont know it, u have to contact the carrier of the sim card for it, my advice would b to try to get a sim unlock code, put the code in just to make sure it is unlocked, then stick the sim for ur country's carrier inside the phone. It will probably ask for a pin again at that point call ur provider, and give them the imei/serial of the sim and ask for the sim pin/puk code. hopefully that resolves the problem. Also do not try to guess the code more then 3 times or u will fry/burn ur sim card and will need a new one.
Network pin code
djkinetic said:
sounds like the phone is asking for a SIM Pin or what's known as a PUK Code, which unfortunately if u dont know it, u have to contact the carrier of the sim card for it, my advice would b to try to get a sim unlock code, put the code in just to make sure it is unlocked, then stick the sim for ur country's carrier inside the phone. It will probably ask for a pin again at that point call ur provider, and give them the imei/serial of the sim and ask for the sim pin/puk code. hopefully that resolves the problem. Also do not try to guess the code more then 3 times or u will fry/burn ur sim card and will need a new one.
Click to expand...
Click to collapse
Thank u man, but it prompts for network pin code, no sim card pin code.
Thank u again. I appreciate it.
antoniolcrd said:
Thank u man, but it prompts for network pin code, no sim card pin code.
Thank u again. I appreciate it.
Click to expand...
Click to collapse
Are you sure it's an ATT Atrix? Could it be that you have for example a Bell Atrix?
p.s. according to widely spread beliefs, if you type in the network unlock code wrong too many times, the phone will become hard locked, meaning it won't accept any sim card. could be that the person you got it from did just that.
If you can still put in a network pin your good. See, you may have an AT&T sim, but it has no service so the phone wont read it until it's unlock. You need to purchase an unlock. DO NOT GO GUESSING. I believe the Atrix has 5 attempts before locking you out forever.
at & t
@xploited
yep, it´s from at&t. It is bundled into at&t pack and also i flashed it OTA last at&t release.
@Purple Drama Llama
yep, it still asks for network pin code to unlock. No one msg like contact operator or phone freezed or whatever. Then i think it may not be hardlocked... yet.
p.s: ordered a third supplier an unlock code. Hope not be refunded this time since i hope it may work good. Wish me luck.
Rgds,
Hi, guys. I have the same problem i've purchased atrix without contract in the at&t retail store, they e-mailed me the unlock code, but the code is wrong i said it to them, they were surprised and e-mailed me another one and it is wrong too they (in the att store) said, that either of them should work and they don't know what to do. i still cant use my sim card. At&t sim was never used in that phone. is it important to have att sim inserted even once? and what to do with the phone?
baseband needed
Hello guys,
pls would some1 upload here the baseband version 1.77.07p?
thnk u all.
antoniolcrd said:
Hello guys,
pls would some1 upload here the baseband version 1.77.07p?
thnk u all.
Click to expand...
Click to collapse
May wanna search in the correct forums for stuff like that probably get more responses.
Sent from my MB860 using xda premium
At Last!!!!
Hello Folks,
at last i managed to solve it. Flashed 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf back and got the same: unsuccesfull unlock. Then flashed the baseband Retail Brazil Radio.sbf and enter the unlocking code from at&t and Voila... unlocked!!!
Thank you all. Let me quickly get into Aura
Hello!
Junior
I'm also from Brazil and I am having the same problem!
Spend more details on how you achieved this miracle! if you can make the files available used would be great!
I'm with version 2.3.4
Abs
I'm a N00B, but I've spent close to 30 hours reading up on posts the past three days. I have the same problem as stated in the original post... even my AT&T sim results in a request for the unlock code now.
I started with an AT&T Atrix. I unlocked the boot loader, put CWM recovery on, put Alien v4 ROM on...then the next day AT&T called me with my unlock code for international use. When I put a new sim in it asked for the code, but did not accept it "Network unlock result unsuccessful" Two other sims just immediately went to "Subsidy Lock ..." statement without asking for the unlock code... then my AT&T sim stopped working, and went to asking for an unlock code right away. Phone also will not pick up any signal, nor connect to any networks
I have entered many codes many times, and not circumvented the error, nor permanently locked it...
My next steps are to install the Gingerbread 2.3 ROM available here: https://supportforums.motorola.com/thread/49191?start=0&tstart=0
Then use RSD lite to flash the AT&T 4.5.91 firmware available here: http://forum.xda-developers.com/showthread.php?t=1125944
After which I am hoping I can enter the unlock code, then re-unlock the boot loader, and flash back to alien v4 ROM again.
Do you think this will work, or have any other better ideas?
Should I use RSD Lite to flash the original firmware .sbf file?
My best guess is that the unlocked boot loader is preventing the phone from carrier unlocking ???
Extra credit:
- any idea how the phone is not permanently frozen after entering unlock codes up to 50 times?
- Will I need to put CWM recovery on the phone again?
- Any idea how the AT&T sim stopped working (while still working fine in another phone)
Please help and I hope this post will help others...
the boot loader unlock .sbf was only 13 MB, but the original 4.5.91 AT&T firmware .sbf is 1.5 GB unzipped... is flashing this mega-file through RSD lite the way to get this operating, or warrantee returnable again from its present state of unlocked boot loader, and not accepting any sims? Thank You
---------- Post added at 04:31 PM ---------- Previous post was at 03:31 PM ----------
FYI: when installing the MotoBlur Gingerbread 2.3 ROM I get a
"Verifying current system...
assert failed: apply_patch_check ("/... lots of alphanumerics
E:Error in /sdcard/Blur_Version....
(Status 7)
Installation aborted"
any ideas? Thanks for your time on this...
Hi all,
hopefully i'm posting in the right place.
I got an LG stylo 3 that have a sim lock only for T-mobile(USA). i want to unlock him to use the carrier in my country.
i already spoke with Tmobile and they told my if i want to unlock the phone i have to work with them for one year ( and i dont want it)
i read some guide on the internet and they sell an activation codes. the problem that i don't have any place to enter the code ( in there giud they say that i should get an activation message when im insert a new SIM card - and i don't get any message)
there is a way to unlock the phone? maybe installing new ROM?
thank you for your help
I don't know if this is relevant anymore to you but i just did this yesterday. AFAIK, there's no way to network unlock this via software. You'll have to go to any store that do Network unlocking, it costed me 30US$ here in MIami