Database Users

ActiveSync via Bluetooth link [solution]

I find this solution for running ActiveSync connected thru BT via one click. I tried it on my MDA Compact and it works.
Hope it helps.
http://www.mtekk.com.au/Forums/tabid/56/postid/14926/view/topic/Default.aspx
On the Pocket PC...
1. ActiveSync / Tools / Options... / Options... (yes options twice)
2. "When cradled Enable PC sync using this connection" 'Bluetooth
3. Startup an ActiveSync connection as you normally would...
4. Now setup a shortcut to the program "windows\repllog.exe" into the Start menu. To do this
a. open up Explore in ActiveSync
b. Go into My Pocket PC
c. Go into Windows folder
d. Find repllog.exe and right click and select copy
e. Go into the Start Menu folder (within Windows folder)
f. Right click, paste shortcut - rename to something like ActiveSync Direct
Back on the Pocket PC
5. Gracefully disconnect ActiveSync.
6. Start / Settings / Buttons
7. Choose Button 4
8. Set the button assignment as ActiveSync Direct (or whatever you called it above) and click OK
9. Reset your Pocket PC and wait about 15 seconds for everything to get loaded (esp. Bluetooth which takes a little while).
10. Press the top left side button. Voila! Easy!
If you get the ActiveSync - "Port Not Available" message, it just means that Bluetooth hasn't loaded yet. Tap OK, check that Bluetooth is activated and if so, try again.

Thanks for the post. Ive been having trouble getting this to work however.
1. ActiveSync / Tools / Options... / Options... (yes options twice)
2. "When cradled Enable PC sync using this connection" 'Bluetooth
3. Startup an ActiveSync connection as you normally would...
4. Now setup a shortcut to the program "windows\repllog.exe" into the Start menu. To do this
a. open up Explore in ActiveSync
b. Go into My Pocket PC
c. Go into Windows folder
d. Find repllog.exe and right click and select copy
Click to expand...
Click to collapse
Im using WM5, and firstly i dont have the option..option menu and secondly when i try to paste repllog it tells me that the file is copy protected or something like that.
Any ideas???
Help appreciated.....

Try to use Resco File Explorer instead of M$ Explorer. When you 'right click' on Windows/repllog.exe, there is 'Send To...' -> 'Start Menu as Shortcut' option in menu.

activesync has only com1!!!!!
hello pda masters!.i try to activesync my ipaq-2490, with usb,can sync.when i try to change com to sync by bluetooth, activesync has only com1, to choose.i have soft reset, my ipaq, (Xmany times), uninstall reinstall activesync 4.01, 4.02 (Xmany times).i eraze registry anfd reinstall, nothing.have you any idea? in the past i could sync by bluetooth, because activesync had com1,com2,com......., now has only com1.please help
sorry if i post in wrong thread, but i am new, and forgive my poor english, (i am from greece)

The best
http://forum.xda-developers.com/viewtopic.php?t=49136
IMHO

help with activesync only com1
every time i install bluetooth usb stack, it uses new com79, com80, now and i cannot sync over bt like i did before.
How can i delete those comports?in device manager under advanced in com1, tells me that from com2-com80 are in used.?????
Any idea, thanks

remove your stack from PC, then delete all com ports except 1 & 2 , use buttons windows + break & install stack again!

in properties of each ports set different com for example com1 , ignore errors , delete free changed one! do so with each wrong port

THANKS A LOT! PROBLEM WITH COM79,COM80,COM81......FIXED
thanx rustoss, you are BIG! i dont unplug usb stack even.....i just ignore all notifications and change my only COM1, to com5, and thats it!.i can activesync by bt again.thanks again :lol: :lol:

Rename Device Name?

Hey folks. I am trying to rename my device (I have some software tied to the deivce ID), but everytime I connect to my desktop via activesync, the device is getting renamed.
How can I stop that?

Did you delete the Activesync partnership on your PC before connecting the re-named device? I find that usually works.

Yes, i did.
I loaded AS on the desktop, "File" -> "Delete Mobile Device".
Then, I goto the tytn (unplugged from the pc) and rename it using Start -> settings -> system -> about ->device ID and clicked "ok".
then, I re-connect the tytn (via cable).
ActiveSync then connects, but uses the OLD device name (It does go thru the setup portion - what to sync, etc.) but still on the old name.

Did you soft reset after changing the device name?

christopherwoods said:
Did you soft reset after changing the device name?
Click to expand...
Click to collapse
yes, I did.

If you remove active sync (program) from both your PC & also delete all sync settings on your PPC, then you wil be able to reset your "name" to whatever you desire.

Look in Local_Machine/ident

news for bb connect

are there news for bb connect on htc polaris??
thank's

try www.ipmart-forum.com. there is a version there for htc touch on pocketpc applications. tried it but really i had no use for it. hugs alot of memory

Check out sems.org. Has all the different BBC versions on there and some forums on running the software. I have been unable to get BBC working on the Cruise. The software installs but doesn't connect and get email. Same symptoms others on that site mention. In the end I just used Exchange push mail and have no need for BBC. Like the previous poster said, it's a resource hog.

I use BB Connect in htc device, incluiding P3600 and Cruise, with this metohd
1. Hard reset.
2. Change device ID, from Start -> Settings -> System -> About -> Device ID to HTC_P3450
3. Install a registry editor, and change HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
4.Then soft reset.
5. Install Blackberry Connect http://rapidshare.com/files/124768324/BBConnect4.0.0.97.cab OR http://rapidshare.com/files/135084257/BBConnect_WM6_Profession4.0.0.100.cab (lastest Version)

not working on my htc polaris
in the Identity PIN is Pending
I using ROM: udK Diamond R6

dabuti9 said:
I use BB Connect in htc device, incluiding P3600 and Cruise, with this metohd
1. Hard reset.
2. Change device ID, from Start -> Settings -> System -> About -> Device ID to HTC_P3450
3. Install a registry editor, and change HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
4.Then soft reset.
5. Install Blackberry Connect http://rapidshare.com/files/124768324/BBConnect4.0.0.97.cab OR http://rapidshare.com/files/135084257/BBConnect_WM6_Profession4.0.0.100.cab (lastest Version)
Click to expand...
Click to collapse
what rom were you using with cruise ?

Connecting to Network Storage

Hello,
I have a storage drive with data on it that I want to be able to access from my HD2 but sadly I can't get it to connect. I have connected to the WiFi successfully and have the expected network address but I can't get it to connect. I have tried the following:
1. Go to file explorer
2. Menu > Go To > Open Path
3. New Path
4. \\dm105
5. I also tried \\IPADDRESS
I guessing the problem is due it being attached to a Windows 7 machine. Does anyone have any idea how to make it work? My windows XP box can connect to the drive no problem...
With \\IPADDRESS it says that network resource cannot be found. With \\DM105 it says my connection settings are missing but then I don't know what to do...

I get exactly the same problem, I'd expect at least a login prompt!

This may solve the problem
- Go to Settings -> All Settings (to get the original Windows Setting) -> Connections -> Wi-fi -> Click on Wireless Network -> Choose your network for the list -> change 'Connects to': from 'internet' to 'Work'.
Try to connect again from file explorer.
Good Luck

can't install hardspl or do hard reset

hello
i have a jade100
i and tried it to install hardspl(automatic or manual) and i can't
gave me an connection error
i tried it to do a hard reset and neither
i try the tow ways to do a hard reset and nothing
please help
i want to change this ugly stock rom
thanks

first connect to your device with Windows Mobile Device Center then try Hardspl Auto
if you still get a problem, turn off fast usb (start > settings > connections > usb to pc > uncheck 'enable faster data synchronization')