Related
Hi there.
I've got a QTek S110 (as title) on O2 UK, and I'm trying to set up MMS messaging. I've spent quite a bit of time searching these forums and google, and although I've had a little success, it's still not working properly. The situation is this:
I can successfully configure the device to send MMS messages, and this works fine. The problem I currently have is with the receipt. If I'm connected to the O2 Wap GPRS connection I have set up for MMS, which sends the messages, then I usually can receive messages I send to myself from another phone. However, if this connection is not active, then the messages just get lost. I'm not notified at all that a message was incoming, and even if I manually connect the device, the message is not received. I never have any knowledge of its passing.
Can anyone help me with this? I'm beginning to go mad, I think...
Have you tried the original O2 MMS cab file from the ext-rom? You can find them on the ftp.
M
oltp said:
Have you tried the original O2 MMS cab file from the ext-rom? You can find them on the ftp.
M
Click to expand...
Click to collapse
I hard-reset my device last night when trying to get it to work, and it didn't configure, so I guess the CAB isn't built into my rom. Could you give me a bit more guidance on the FTP server, I'll take a look myself, but not really sure what I'm looking for.
Thanks for the response.
I got kids, so I say: chips there's no UK O2 ext-rom uploaded on the ftp.
But I found you this:
Access point name: wap.o2.co.uk (contract customers) or payandgo.o2.co.uk (pay-as-you-go customers)
Username: o2wap (contract customers) or payandgo (pay-as-you-go customers)
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.113.200.195
Session mode: Permanent
@ this site: http://www.filesaveas.com/mms.html
Hope it helps,
M
URL address: http://mmsc.mms.o2.co.uk:8002
oltp said:
I got kids, so I say: chips there's no UK O2 ext-rom uploaded on the ftp.
But I found you this:
Access point name: wap.o2.co.uk (contract customers) or payandgo.o2.co.uk (pay-as-you-go customers)
Username: o2wap (contract customers) or payandgo (pay-as-you-go customers)
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.113.200.195
Session mode: Permanent
@ this site: http://www.filesaveas.com/mms.html
Hope it helps,
M
URL address: http://mmsc.mms.o2.co.uk:8002
Click to expand...
Click to collapse
These are the settings I believe I'm using...
In connections, I have:
Advanced->Select Networks
Internet: O2 MMS Test
Private Network: O2 MMS Test
In tasks, I have
'O2 MMS Test' Is my connection
Manage existing connections->Modem tab->'O2 GPRS WAP'->Edit
-- Modem: Cellular Line (GPRS)
-- Access Point: wap.o2.co.uk
-- user: o2wap
-- password: password
-- advanced:
-- -- tcp/ip:
-- -- -- Use server-assigned: checked
-- -- -- Use software compression: unchecked
-- -- -- Use IP Header compression: unchecked
-- -- servers
-- -- -- DNS: 193.113.200.195
I have also, under the proxy tab, got
This network connects to the internet: checked
Uses a proxy server: checked
Advanced->
-- HTTP: 193.113.200.195 port 8080
I set this proxy as it allows me to access the internet through this connection; it doesn't seem to affect the MMS operation.
In MMS settings, I have:
Prefs:
Connect via: O2 MMS Test (the connection I set up)
Retrieve message immediately: checked
Ok to download when roaming: checked
Save sent messages: checked
Attempts before giving up: 5
Photo Res: 640x480
Servers:
Gateway: 193.113.200.195
Port: 9201
Server address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitation: 100K
--Gavin
Rereading your first post & adding up your last comments, I'm beginning to think to network screws up in this case. Either it doesn't register you as being offline, or it can't store & forward the MMS for you.
Maybe O2 themselve can help you in this, I don't think your device is incorrect configured.
M
I had similar issues with my S100 on Orange. I could send MMS to anyone but the only MMS I could received were if I sent them to myself. I think I've finally cured the problem with the latest T-Mobile MMS client.
6thElement said:
I had similar issues with my S100 on Orange. I could send MMS to anyone but the only MMS I could received were if I sent them to myself. I think I've finally cured the problem with the latest T-Mobile MMS client.
Click to expand...
Click to collapse
So you're using different software for the MMS? Could you direct me to where I could download this/how to set it up.
Thanks
--Gavin
On the FTP
Copy the downloaded CAB file to your S110 and run it to install. MKae sure your messaging app is closed first though! If your wallpaper messes up once you've installed it just reset your wallpaper again.
6thElement said:
On the FTP
Copy the downloaded CAB file to your S110 and run it to install. MKae sure your messaging app is closed first though! If your wallpaper messes up once you've installed it just reset your wallpaper again.
Click to expand...
Click to collapse
Woohoo!
That works, thankyou very much .
My invoice is in the post
Since an hard reset i also have probs with qtek s100 and mms. Does the application which is downloadable a few posts ago compatible to austrian phones too ?
djtwok said:
Since an hard reset i also have probs with qtek s100 and mms. Does the application which is downloadable a few posts ago compatible to austrian phones too ?
Click to expand...
Click to collapse
The application is the same as the one packaged with the phone, just a newer version; so yes is the answer, it should work with austrian phones.
After logging on the ftp it tells me "file not found" ? btw: the app was made for s110 and mine is an s100 does that matter ?
djtwok said:
After logging on the ftp it tells me "file not found" ? btw: the app was made for s110 and mine is an s100 does that matter ?
Click to expand...
Click to collapse
That link still works for me, and it should be fine on an s100; there's not much difference between the two.
Hi guys I'm having a hard time connecting to the internet on my htc fuze. I just bought a brand new htc fuze off ebay and successfully unlocked it. Ive tried manually putting in the Rogers settings but it doesn't really work that well. Has anybody got their fuze to work on the Rogers network?
Any help would be much appreciated
PS: Wifi works flawless with internet explorer and Opera.
Here's the latest settings for Rogers. Works on WM 6.1.
GPRS:
Profile Name: RogersInternet
Connects to: The Internet
Access Point: internet.com
Everything else Default/Blank/None
Profile Name: RogersMedia
Connects to: Work
Access Point: media.com
User name: wapuser1
Password: wap
Authentication Type: PAP
Everything else Default/Blank
Proxy:
Profile Name: HTTP
Connects from: The Internet
Connects to: WAP Network
Proxy: 10.128.1.69:80
Type: HTTP
Everything else Default/Blank
Profile Name: Socks4
Connects from: The Internet
Connects to: WAP Network
Proxy: 10.128.1.69:1080
Type: Socks4
Everything else Default/Blank
Multimedia Msg. Options
Sending Options
Priority: Normal
Validity Period: Maximum
Delivery Time: Immediatly
Creation Mode: Free
Size: 295 KB
Request Delivery/Read Report: Unchecked
Receiving Options
Download Mode: Automatic
Reject Unknown Sender: Unchecked
The rest are all checked
Multimedia Msg. Profiles
Profile Name: RogersMedia
MMSC URL: http://mms.gprs.rogers.com
Proxy: Checked
Address: 10.128.1.69
Port: 80
GPRS: RogersMedia
After doing the first one, my internet/e-mail/weather/etc all work fine.
There's also a CAB file that was created by Lurch3559.
Original Thread. http://forum.xda-developers.com/showthread.php?t=311426
I haven;t done it on the Fuze (yet - its in the mail!)
But on the Elf/Touch that I;m currently using just doing the internet.com settings was enough to get me going.
One thing though... is the one you bought actually the "HTC Fuze" (RAPH110) or was it a "Touch Pro" (RAPH100)?
The RAPH100 is the euro model and uses different frequencies for its UMTS antenna, which basically means you wouldn't be able to do 3G/HSDPA
mgwatson said:
I haven;t done it on the Fuze (yet - its in the mail!)
But on the Elf/Touch that I;m currently using just doing the internet.com settings was enough to get me going.
One thing though... is the one you bought actually the "HTC Fuze" (RAPH110) or was it a "Touch Pro" (RAPH100)?
The RAPH100 is the euro model and uses different frequencies for its UMTS antenna, which basically means you wouldn't be able to do 3G/HSDPA
Click to expand...
Click to collapse
Not sure if you're asking me or the OP, but I grabbed the actual Fuze that AT&T carries. Got in unlocked and the 3G feels faster than my iPhone. This could just be the placebo effect mind you. lol
Thanks for the replied guys I'll let you know how I get on.
My girlfriend also has an htc fuze but she flashed it the Romeos rom and everything works flawlessly. Maybe that's the way to go.
2nsane2005 said:
My girlfriend also has an htc fuze but she flashed it the Romeos rom and everything works flawlessly. Maybe that's the way to go.
Click to expand...
Click to collapse
Plus the new .20M1 radio, and you're set!
▐HYBRID▐07.09.2010▐warrenb213 CM6 9/6V1.5a T-Mo US Optimized▐ Kernel:mitchyprima r10▐
▐HYBRID▐07.09.2010▐warrenb213 CM6 9/6-V1.5a T-Mo US Optimized▐ Kernel:mitchyprima r10▐
**NOW SUPPORTING BOTH PPP AND RMNET** I WILL STILL BE PRODUCING PPP FIRST EACH ROUND
I would suggest using the RMNET edition when available. Prepare to be somewhat impressed
Credit really goes to shu8i, mitchyprima, ElBartMe, and the entire dev Leo dev community
This is a T-MOBILE US OPTIMIZED BUILD. While I'll try and update settings per request, I would like to at least keep these rebuilds US FOCUSED.
Key Current Advantage:
** HAS BEST T-MO APN/MMS SETTINGS AVAILABLE
** MODIFIED AT&T APN/MMS SETTINGS WITH PROVIDED SETTINGS
** LATEST KERNEL HYBRID. GIT/MICHY R10 NONOC'D EDITION
** HAS WI-FI and BLUETOOTH
** WI-FI TETHERING WORKS**may need iptables implemented
** SUPPORTS EXTENDED BATTERIES(IN KERNEL)
** OPTION OF PPP OR RMNET!
** BUILT OFF CYANOGENMOD 6 NIGHT BUILDS HYBRID W/ Shu8i
** FAST GPS LOCK IN THE USA
** HTTPS SERVERS ACCESSIBLE
** FAST!!
As of 1.2a, I will be staggering releases. First will be PPP, Second will be RMNET.
shubCRAFT build is located: HERE
mitchyprima kernel thread is located: HERE
Changelog:
1.5a - HYBRID
Figured out how to actually switch between rmnet and PPP effectively
Updated to current standard PPP piggyback
Took down links for 1.5 due to broken half done PPP enable - switched to current workaround
1.5 - HYBRID
Newest [email protected] #139 (r10) zImage and included modules
Started with a fresh CM6 Nightly Build 9/6 for Nexus One
Merged apk's and framework from shu8i's shubCRAFT CM6
Updated gps.conf for US settings
Merged CM6 Nexus build.conf with warrenb213 modded shu8i shubCRAFT
Updated build.conf with faster 3G/gprs and T-Mobile settings and moved into ext2 image
Updated resolv.conf to reflect T-Mobile DNS
Wi-Fi Router should work perfect this time
Bluetooth should work
Updated APN settings to now have the MOST CORRECT settings
T-Mo US settings updated to my latest config
AT&T US settings updated to settings I was provided
Included 1GB RoofFS
1.2a - shu8i MOD
Newest [email protected] #139 (r10) zImage and included modules
Newest Bluetooth from 8/31 GIT modules
Moved all external modules into the ext2 image
Updated gps.conf for US settings
Updated build.conf with faster 3G/gprs and T-Mobile settings and moved into ext2 image
Updated resolv.conf to reflect T-Mobile DNS
Wi-Fi Router USABLE through script - see original post
Updated APN settings to now have the MOST CORRECT settings
T-Mo US settings updated to my latest config
AT&T US settings updated to settings I was provided
Included 1GB RoofFS
____________________
It has been a great learning experience thus far. I'm learning more everyday. Here soon maybe I'll be able to get into some kernel-work myself.
QUADRANT SCORE: ~1600+ with Wi-FI and bluetooth enabled on stock 16gb class2 Sandisk SDCARD
Download Test:
PPP:
w/ Wifi: using home connection proportional to what i'd expect on campus
w/ 3G: not tested as of yet, but should be FAST
RMNET:
w/ Wifi: Untested, but should be as expected
w/ 3G: Untested, but should be as expected
And here are the links:
NEWEST EDITION 1.5a:
PPP Edition:
FTP Mirror as provided by mal67: HERE
Megaupload: Coming soon!
Rapidshare: Coming soon!
RMNET Edition:
Coming Soon!
______________________________
______________________________
OLDER EDITIONS
RMNET Edition:
Megaupload: HERE
RapidShare: HERE
Hotfile: HERE
PPP Edition:
Megaupload: HERE
RapidShare: HERE
Hotfile: HERE
***ATTENTION: WI-FI TETHERING WORKS BUT MAY NOT PASS CORRECT IPTABLES
If not, use these commands:
su iptables
iptables -I FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -I FORWARD -s 192.168.43.0/24 -j ACCEPT
iptables -P FORWARD DROP
iptables -t nat -I POSTROUTING -s 192.168.43.0/24 -j MASQUERADE
awesome man
battery meter for android builds
Can you add in the percentage for the battery meter? Or is there a way I can add that myself??
Percentage can be added under the cyanogenmod settings in the settings panel
You will find this under ui/status bar.
Shopshear said:
Can you add in the percentage for the battery meter? Or is there a way I can add that myself??
Click to expand...
Click to collapse
on top of the previous suggestion you could just download the battery widget from the market for free.
sweet stuff man keep it up! were u thinkin of doing a AT&T u.s. build?
itsedstech said:
sweet stuff man keep it up! were u thinkin of doing a AT&T u.s. build?
Click to expand...
Click to collapse
if somebody private messages me the settings for AT&T US I'll be happy to even make you guys a specific build. just need the dns settings and apn settings.
Nice, mirror anyone? 3 hours to download too long!
osokrayzay said:
Nice, mirror anyone? 3 hours to download too long!
Click to expand...
Click to collapse
uploading to rapidshare now.
been putting more thought into the whole specific carrier settings, kinda wondering if i could just make a program that runs as sudo and asks you your carrier, and changes dns accordingly. hmmmmm.
Wifi Tethering Working
Good New, the Wifi Tethering option is working for me.
I am downloading now. I cant wait to take it for a spin. Thank you for your hard work.
I cant send mms, what are the tmobile apn settings? the correct ones?
atoore said:
I cant send mms, what are the tmobile apn settings? the correct ones?
Click to expand...
Click to collapse
Same issue, no MMS..I had the same issue on the build from Shu8i
fernyherrera said:
Same issue, no MMS..I had the same issue on the build from Shu8i
Click to expand...
Click to collapse
These are the settings being used:
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: (leave this blank)
Port: (leave this blank)
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS Protocol: WAP 2.0 (if you have this)
MCC: 310
MNC: 260
APN Type: default,supl,mms
you could try changing it to:
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: 8080
MCC: 310
MNC: 260
APN Type: default,supl,mms
Alright guys first post. I downloaded the build and surprisingly everything seems to be going pretty smoothly. I have been running only Droid for about 2 days and the only problems I have had are not bring able to connect to my data service and GPS not working and wifi as well. But the problems seemed to just currect themselfs. I am writting this post from my phone. Its the HTC hd2 running Droid 2.2 radio version 2.08.0 I believe. Ill post the rest of my phones specs in case anyone is interested and also ill post a video of me using it so people can see how well its working. I can even install apps directly from the market. The only slight problems I still have are an ocassional freeze or studer. And also the rotation of the screen lags a bit longer than I believe it should. Oh and also it takes about 1. Minute to receive a good accuracy with GPS enabled programs like Google maps. PM me if you would like help. Ill do my best yo answer your questions on how I solved some of my issues when using Droid on the hd2. Oh and sorry if I posted in the wrong thread. I just thought this was the best one to post in.
Sent from my HTC HD2 using XDA App
Sorry I forgot to say that I am running froyo.
Droidx? Is this the build of Droidx mobile. Can u send me the link to download the build. Did I need to change my radio version in order to run this.
Thanks in advance
damn.... Rapidshare says limit has been reached! Can't download
Thanks mate going to test and will post results.
hi.. any chance of releasing world wide version?
thanks
mokmok said:
hi.. any chance of releasing world wide version?
thanks
Click to expand...
Click to collapse
megaupload works fine.
I'm having issues sending & receiving MMS messages. The data connection works fine for browsing, and the APN settings are the ones from the O2 website (although I've tried several combinations from Google).
Same problem on both PPP and RMNet on michy's r11 and PPP on hastarin 7.2, can't figure it out. I've spent hours on Google and have search XDA, and can't get anywhere.
I've even tried using the Google DNS & O2 DNS servers to no avail.
I've included a logcat of what happens when I try to send an MMS in case it helps.
Does anyone have any ideas? I'm stumped.
We have 2 HD2s on O2, happens on both.
MMS works fine in WinMo.
WinMo: O2 Stock 1.72
Radio 2.12 & 2.15
Android: Bangsters 1.4 & 1.5
Kernel: michy's r11 and hastarin #7.2
Code:
I/pppd ( 2973): PAP authentication succeeded
D/MobileDataStateTracker( 304): mms Received state= CONNECTED, old= CONNECTING, reason= apnSwitched, apnTypeList= mms
D/NetworkStateTracker( 304): setDetailed state, old =CONNECTING and new state=CONNECTED
D/ConnectivityService( 304): ConnectivityChange for mobile_mms: CONNECTED/CONNECTED
V/NetworkStateTracker( 304): Setting TCP values: [4093,26280,35040,4096,16384,35040] which comes from [net.tcp.buffersize.edge]
D/NetworkLocationProvider( 304): onDataConnectionStateChanged 1
D/NetworkStateTracker( 304): addPrivateDnsRoutes for Mobile data state: CONNECTED(ppp0) - mPrivateDnsRouteSet = false
D/NetworkStateTracker( 304): adding 193.113.200.200 (-926387775)
D/NetworkStateTracker( 304): adding 193.113.200.201 (-909610559)
D/Tethering( 304): Tethering got CONNECTIVITY_ACTION
D/Tethering( 304): MasterInitialState.processMessage what=3
E/HierarchicalStateMachine( 304): TetherMaster - unhandledMessage: msg.what=3
D/GpsLocationProvider( 304): updateNetworkState available info: NetworkInfo: type: mobile_mms[EDGE], state: CONNECTED/CONNECTED, reason: apnSwitched, extra: mobile.o2.co.uk, roaming: false, failover: false, isAvailable: true
V/NetworkChange( 767): Received network change notification
D/NetworkLocationProvider( 304): updateNetworkState(): Updating network state to 2
D/ConnectivityService( 304): startUsingNetworkFeature for net 0: enableMMS
D/ConnectivityService( 304): getMobileDataEnabled returning true
D/ConnectivityService( 304): special network already active
I/GTalkService( 440): [ServiceAutoStarter] --- connectivity changed
I/GTalkService( 440): [ServiceAutoStarter] --- start GTalk service ---
I/MediaUploader( 731): No need to wake up
E/SendTransaction( 596): java.io.IOException: Cannot establish route for http://mmsc.mms.o2.co.uk: Unknown host
E/SendTransaction( 596): at com.android.mms.transaction.Transaction.ensureRouteToHost(Transaction.java:210)
E/SendTransaction( 596): at com.android.mms.transaction.Transaction.sendPdu(Transaction.java:165)
E/SendTransaction( 596): at com.android.mms.transaction.Transaction.sendPdu(Transaction.java:150)
E/SendTransaction( 596): at com.android.mms.transaction.SendTransaction.run(SendTransaction.java:118)
E/SendTransaction( 596): at java.lang.Thread.run(Thread.java:1096)
E/SendTransaction( 596): Delivery failed.
bump bump. Same problem here for me
contract or payg ?
contract.......................
In your MMS APN settings is the http://mmsc* server information in the SERVER or MMS SERVER slot?
dkl_uk said:
In your MMS APN settings is the http://mmsc* server information in the SERVER or MMS SERVER slot?
Click to expand...
Click to collapse
Tried in each and both
optiknerv said:
Tried in each and both
Click to expand...
Click to collapse
Well it definitely shouldn't be in the SERVER slot, that's part of your issue and you will receive errors regarding the lack of connection. It's trying to connect to something it's not supposed to want to connect to.
You have a choice of the following:
Data Bearer:
GPRS
Access Point Node (APN):
wap.o2.co.uk (contract)
payandgo.o2.co.uk (PAYG)
User ID:
o2wap (contract)
payandgo (PAYG)
Password:
password
Authentication
Normal
Gateway
193.113.200.195
MMS Message Server
http://mmsc.mms.o2.co.uk:8002
ENSURE there is a tick only in the MMS box.
I have tried to setup MMS in my network settings and failed, although it can be done. You should end up with two APN's, one is "default,supl" and the other is "mms".
dkl_uk said:
Well it definitely shouldn't be in the SERVER slot, that's part of your issue and you will receive errors regarding the lack of connection. It's trying to connect to something it's not supposed to want to connect to.
You have a choice of the following:
Data Bearer:
GPRS
Access Point Node (APN):
wap.o2.co.uk (contract)
payandgo.o2.co.uk (PAYG)
User ID:
o2wap (contract)
payandgo (PAYG)
Password:
password
Authentication
Normal
Gateway
193.113.200.195
MMS Message Server
http://mmsc.mms.o2.co.uk:8002
ENSURE there is a tick only in the MMS box.
I have tried to setup MMS in my network settings and failed, although it can be done. You should end up with two APN's, one is "default,supl" and the other is "mms".
Click to expand...
Click to collapse
I don't get a failed connection error. In fact I note that when I click send it disconnects from data connection then reconnects (i presume to the mms settings) it seems to show data upload and download but after a couple of minutes I get a "failed to send message after multiple attempts error"
It's just a wild guess, but I had problems with sending MMSes (while being sure that all carrier APN's settings were correct), when MMS Size setting was set to higher values than 300 KB. Although my problems were only with sending MMSes - I could receive them without any problems.
adecostres said:
It's just a wild guess, but I had problems with sending MMSes (while being sure that all carrier APN's settings were correct), when MMS Size setting was set to higher values than 300 KB. Although my problems were only with sending MMSes - I could receive them without any problems.
Click to expand...
Click to collapse
Seems this was the problem. Cheers.
Before I begin, let me quote infinitybiff when I say, "You likely voided your warranty long ago. So if your phone explodes.... not it."
I recently came across a different forum that had a user that claimed these apn settings worked on his device, (it wasn't an HD2, but I had to try it) Afterwards, I attempted to send a MMS message that was almost 300kb, and it sent in less than 2 seconds on HSDPA. I also used the Xtremelabs speedtest app and scored 2328.8 Kbits/s max download, and 480.1 Kbits/s upload. On Wi-fi I only scored 1342.6 Kbits/s max download, and 271.6 Kbits/s upload.
I tested this on both Darkstones latest Froyostone sense v3.2, and BiffMod HD2 v1.1 vanilla froyo.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.165.155.050
Port: 8080
Username: None
Password: **** (These are just stars, you can put it in there manually)
Server: * (Same)
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.165.155.050
MMS Port: 8080
MCC: 310
MNC: 260
Authentication type: none
APN Type: Not set
As far as I can tell, APN Type is possibly what fixes this problem.
The orange text says EDGE, but it is actually HSDPA/HSPA+, whichever its supposed to be.
The white text underneath is the Wi-Fi here in my house, from Time Warner Cable.
EDIT: Working MMS settings for Netcom Norway thanks to Exlo for this http://bit.ly/hlUHBO
Guys, if you have any other carriers, besides T-Mobile, or AT&T, let me know and i will update the post.
it works for mms (for me) but how is the stability of the connection? does it still drop a lot? wasn't sure if that was the apn's fault or ppp.
malachakla said:
it works for mms (for me) but how is the stability of the connection? does it still drop a lot? wasn't sure if that was the apn's fault or ppp.
Click to expand...
Click to collapse
The stability is directly related to ppp, the apn just determines how it goes through t-mobiles servers. Try using BiffMod HD2 v1.1, havent had a single ppp data disconnect yet.
The main problem with MMS on sense builds is when receiving the MMS, it will be compressed to 3-4Kb because of the Desire user agent being used.
AFAIK, the APN settings won't prevent that. So while these setting may allow sending MMS fast, they won't fix the compression issue.
Also, I believe using proxys may prevent some websites from displaying correctly.
spbeeking said:
Before I begin, let me quote infinitybiff when I say, "You likely voided your warranty long ago. So if your phone explodes.... not it."
I recently came across a different forum that had a user that claimed these apn settings worked on his device, (it wasn't an HD2, but I had to try it) Afterwards, I attempted to send a MMS message that was almost 300kb, and it sent in less than 2 seconds on HSDPA. I also used the Xtremelabs speedtest app and scored 2328.8 Kbits/s max download, and 480.1 Kbits/s upload. On Wi-fi I only scored 1342.6 Kbits/s max download, and 271.6 Kbits/s upload.
I tested this on both Darkstones latest Froyostone sense v3.2, and BiffMod HD2 v1.1 vanilla froyo.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.165.155.050
Port: 8080
Username: None
Password: **** (These are just stars, you can put it in there manually)
Server: * (Same)
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.165.155.050
MMS Port: 8080
MCC: 310
MNC: 260
Authentication type: none
APN Type: Not set
As far as I can tell, APN Type is possibly what fixes this problem.
The orange text says EDGE, but it is actually HSDPA/HSPA+, whichever its supposed to be.
The white text underneath is the Wi-Fi here in my house, from Time Warner Cable.
Click to expand...
Click to collapse
I can not get my MMS to work for ****! So frustrated ...
I try the above setting
MY BUILD:
HD2 LEO
ROM: VBN
RADIO:2.15.50
Darkstones latest Froyostone sense v3.2
16GB CLASS 4
Texas, U.S
sittyb123 said:
I can not get my MMS to work for ****! So frustrated ...
I try the above setting
MY BUILD:
HD2 LEO
ROM: VBN
RADIO:2.15.50
Darkstones latest Froyostone sense v3.2
16GB CLASS 4
Texas, U.S
Click to expand...
Click to collapse
Try InfinityBiffs BiffMod HD2 v1.1 and see if MMS works for that. I didnt realise till later that the MMS was still messed up for froyostone sense v3.2. It still works for me on BiffMod.
sittyb123 said:
I can not get my MMS to work for ****! So frustrated ...
I try the above setting
MY BUILD:
HD2 LEO
ROM: VBN
RADIO:2.15.50
Darkstones latest Froyostone sense v3.2
16GB CLASS 4
Texas, U.S
Click to expand...
Click to collapse
MMS works on this one http://forum.xda-developers.com/showthread.php?t=820696 TMOUS ONLY
I can confirm that these settings work perfect!
Thanks a lot dude I was going crazy because with the other settings I found on this forum somehow when I tried to download the contents of the MMS I data connection would drop and it would fail
Now with these settings Im able to download MMS in 2 secs
OnE ShoT said:
I can confirm that these settings work perfect!
Thanks a lot dude I was going crazy because with the other settings I found on this forum somehow when I tried to download the contents of the MMS I data connection would drop and it would fail
Now with these settings Im able to download MMS in 2 secs
Click to expand...
Click to collapse
No problem dude, I'm glad I was finally able to contribute something to XDA.
I used these settings on the FroyoSense v3.2 and, my MMS is working as long as it isn't connected to WiFi.
Other than that it works like a charm.
Can anyone tell me how I can get the MMS over WiFi working? Or is it not supposed to work that way?
spbeeking said:
Before I begin, let me quote infinitybiff when I say, "You likely voided your warranty long ago. So if your phone explodes.... not it."
I recently came across a different forum that had a user that claimed these apn settings worked on his device, (it wasn't an HD2, but I had to try it) Afterwards, I attempted to send a MMS message that was almost 300kb, and it sent in less than 2 seconds on HSDPA. I also used the Xtremelabs speedtest app and scored 2328.8 Kbits/s max download, and 480.1 Kbits/s upload. On Wi-fi I only scored 1342.6 Kbits/s max download, and 271.6 Kbits/s upload.
I tested this on both Darkstones latest Froyostone sense v3.2, and BiffMod HD2 v1.1 vanilla froyo.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.165.155.050
Port: 8080
Username: None
Password: **** (These are just stars, you can put it in there manually)
Server: * (Same)
MMSC: mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.165.155.050
MMS Port: 8080
MCC: 310
MNC: 260
Authentication type: none
APN Type: Not set
As far as I can tell, APN Type is possibly what fixes this problem.
The orange text says EDGE, but it is actually HSDPA/HSPA+, whichever its supposed to be.
The white text underneath is the Wi-Fi here in my house, from Time Warner Cable.
Click to expand...
Click to collapse
Thank you soooo much, these exact settings fixed my mms issue with HD2Froyo v3 !!!!!!!!!!!
I believe the MMS Proxy IP should be 216.155.165.50
That is the IP I got from the T-Mobile support site, since it's working for some it makes me wonder if MMS is not being pushed through the proxy at all.
sactownsav said:
Thank you soooo much, these exact settings fixed my mms issue with HD2Froyo v3 !!!!!!!!!!!
Click to expand...
Click to collapse
No problem, just passing on these settings that I found.
i used this same settings on 3 diferent builds and they work, im able to send video and pic msgs w/o any problems...... thanks a lot for posting this....!!!
matutemhn said:
i used this same settings on 3 diferent builds and they work, im able to send video and pic msgs w/o any problems...... thanks a lot for posting this....!!!
Click to expand...
Click to collapse
No problem. just be sure to pass this on to anyone else if you get the chance. But make sure to give me credit for finding this
yeah man, just to be more specific to everyone it works perfectly when your not using wifi,,,, but i was having a lotta data loss all the time and after i used this settings i havent experimented any ......... so sure man, thanks a lot, i will repost this on other forums if youre ok with it and youll get credit everyone is gonna be redirected to your post,,,
Thanks!
I've been looking for a solution to this. After trying many different configurations, this worked for me and my setup (see sig).
Cheers...
matutemhn said:
yeah man, just to be more specific to everyone it works perfectly when your not using wifi,,,, but i was having a lotta data loss all the time and after i used this settings i havent experimented any ......... so sure man, thanks a lot, i will repost this on other forums if youre ok with it and youll get credit everyone is gonna be redirected to your post,,,
Click to expand...
Click to collapse
No, I dont have a problem with it, just as long as you give me credit for the find, and a link to this page.
my fried just confirmed these settings worked for him also,
matutemhn said:
yeah man, just to be more specific to everyone it works perfectly when your not using wifi,,,, but i was having a lotta data loss all the time and after i used this settings i havent experimented any ......... so sure man, thanks a lot, i will repost this on other forums if youre ok with it and youll get credit everyone is gonna be redirected to your post,,,
Click to expand...
Click to collapse
Oh, before I forget, I already posted this on kingxklick.com, but it seems like the HD2 forums are dead over there except for infinitybiff.