Related
I know there are various threads like this one but my situation is a bit different. I tried using odin to clean install 2.2 to then use the custom rom epic experience. I attempted to install 2.2 using odin but it would get stuck in "setup connection" and I would have to quit and try again. Last time I tried my phone got the "phone connection caution computer" icon and to get into recovery I would have to hold the power and camera button, not the volume down button. When I go to try and install things straight from my SD card I would get an error like "status 7" cus I didn't have the sprint apps to install 2.2. I believe I get these errors installing straight from the card cus I rooted my phone, modifying the kernal cus I read somewhere because when trying to update, it tries to verify but can't cus things are missing or edited cus of the root. I can't try to use odin again because my computer can't recognize the phone anymore regardless reinstalling the samsung drivers. SOOOO, I'm basically ****ing stuck for sure I think. The way I access the SD card is by using an adapter. The only way I see this working is if I find a fix using the SD card, but it's looking slim cus of the stupid root.
I don't know much about this yet, as I'm still learning myself. Did you try using another usb port and are you putting the phone in download mode?. Restart the computer and the phone. Make sure odin is running before you plug in the phone as well. And try another usb port. Are you using the cable that came with the phone? That one trends to have problems for some people.
Edit: I don't believe your phone is bricked either, people tend to throw the word around to much because that arnt quite sure about the definition. Just hang in there and the community will help you get back up and running. Good luck
Sent from my shoe, I mean....Epic shoe... I mean Samsung Epic!
mxcoldhit said:
I don't know much about this yet, as I'm still learning myself. Did you try using another usb port and are you putting the phone in download mode?. Restart the computer and the phone. Make sure odin is running before you plug in the phone as well. And try another usb port. Are you using the cable that came with the phone? That one trends to have problems for some people.
Edit: I don't believe your phone is bricked either, people tend to throw the word around to much because that arnt quite sure about the definition. Just hang in there and the community will help you get back up and running. Good luck
Sent from my shoe, I mean....Epic shoe... I mean Samsung Epic!
Click to expand...
Click to collapse
You see, I'm out of options. Last thing I thought of was installing a custom rom 2.1 rom cus 2.2 roms need odin, but I try to install and I get a signature error or whatever. I'm about to throw the phone against the wall, crack the screen, and use my warranty and get a new phone cus I literally tried EVERYTHING. I spent my ****ing 8 hours of my saturday trying to fix this.
Try a different computer my new Dell XPS 9100 will never reconize my Epic, however, my wifes laptop will always reconize it. I know that sounds weird, I always thought I had a poblem with my phone but it ended up being my computer.
Sent from my SPH-D700 using XDA App
cbpagent72 said:
Try a different computer my new Dell XPS 9100 will never reconize my Epic, however, my wifes laptop will always reconize it. I know that sounds weird, I always thought I had a poblem with my phone but it ended up being my computer.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
omfg, I used my mom's lappy and the drivers worked. Meaning I can try and use an odin fix.
Odin can be tricky to use because of a few factors other than itself. 1) if you can, use a deskto pc and attach to a usb port literally on the motherboard, no front or pci, this may work, but this I what I found (reading countless threads) to be the most failsafe for everyone. 2) your sammy usb cable is for charging or non critical data transfer ONLY, as it is garbage... repeatedly proven in the threads. 3) reboot pc and phone, boot phone into download mode, (hold down 1. On physical keyboard and press power... DO NOT CONNECT YET! Start up odin, place files where needed (.pit, etc...) uncheck all but what you're told in the flashing instructions with the file you're flashing, most have awesome detals, but sometimes your little issue is resolved on page 50 of the thread... not in the OP. Ok so now plug in the usb connection, odin should find it. If it doesn't, search for drivers, uninstall, reinstall start over, OR you have a bad connection, refer back to usb port and cable. I have 1 out of 4 mobo usb ports that the drivers will maintain a connection to, so try another. Then, once odin has a connection, make sure you're following the guides to the T (and read all the posts)... after that, odin is your best friend. The problem lies elsewhere... odin is the goods. If you have run into problems maintaining connection, and plan to re-root, read all the one click posts and if it drops connection a lot, enter the commands in one by one, repeat if one fails till it sticks. There are way better guides, but you seem to have run into the same issues I did, and after hours and hours, I got that scary ass reconnect me now screen. Just read the whole threads, and if your problem hasn't already been resolved, post in the appropriate thread, so others may learn from your discoveries!
Don't give up, once you figure out the quirks of the relationship between your pc and phone, and of course meticulously follow instructions, your elation when successful will make you forget that pesky 'bricked' screen... trust me I got it too, and no matter how much everyone says you can't brick these following instructions on here... its still scary till it all works. If things are wonky, wipe, go back to DI18 and start over... or just sit tight for froyo roms... good luck!
Oh, and sorry for no links, but it would seem you've probly already read em all... not sure I can do links...
Maybe its just my eeepc that doesn't like the drivers, good luck! Sounds like you're on the way... oh don't forget with the drivers to let em install on connect, leave it plugged in for like 10 mins, unplug, it will then complain it wasn't done, reconnect, then after that finishes, reboot. Crazy drivers...
At least I got a computer recognizing my phone, so I can try and use odin. I've been trying to use this fix
http://forum.xda-developers.com/showthread.php?p=9755894#post9755894
and so far odin has been stuck at this one step "file analysis..."
Yeah I used that method to no avail, but it was about 3 pasts old at the time, so I figured id try
something more stable. Tried a couple dk17 roms, then went back to 2.1 and am now using syndicate xtreme. Id suggest going back to DI18, then go from there. Let me check for another post of mine, theres a dialer code I had to do too at one point...
Ok when doing one click root, someone suggested ##8778# in the dialer, then keyboard enter, then set UART to pda not modem. This and removing comodo firewall, all the sudden my intermittent connection was solid. Not responsible for what this does, but it worked for me. Never found out what it does..... still curious. So this may help you even in odin, try to flash di18 after doing this, then the all in one rom you're looking at...
Oddly enough, I managed to semi-brick my phone several hours ago - my wireless adapter was on the same USB header, and both the wireless adapter and the phone crapped out while trying to flash with Odin.
Thankfully I was still able to get into download mode, and plugging the phone into a different USB port worked fine.
After some more research, about 10 hours of it, odin finally cooperated with me after I downloaded about every kind of file that could make my phone work and finally got it into 2.1
I first flashed the stock kernal to get it working, then flashed stock 2.1
Now I'm that my phone isn't rooted anymore I tried installing 2.2 through the recovery menu and I still get error status 7. Any ideas?
Probly best to post in the thread for the package/rom you are trying to install... others using it should be able to help... or you can do a 2.1 rom and wait for a final froyo based rom... glad to hear you're not bricked... the only way I've heard you can absolutely do that with these is installing a GSM rom or something crazy like that... but non-functional phone is scary regardless...
ungovernable1977 said:
Probly best to post in the thread for the package/rom you are trying to install... others using it should be able to help... or you can do a 2.1 rom and wait for a final froyo based rom... glad to hear you're not bricked... the only way I've heard you can absolutely do that with these is installing a GSM rom or something crazy like that... but non-functional phone is scary regardless...
Click to expand...
Click to collapse
Alright I completely fixed my phone. After I rooted my phone on 2.1, I then used odin v1.6 to install the froyo .tar file into pda and it worked. I then rooted it again so now I'm back to normal. Honestly, I did so many things I forgot what I did but I now have my phone functional. Thanks for help everyone, I greatly appreciate it!
[EDIT 3] Worked fine, finally, thanks for all the help.
[EDIT 2] Yeah, I don't know how it happened or what happened, but I got a lot further. I started to get Odin failing at recovery and then remembered this thread which I found earlier: http://forum.xda-developers.com/showthread.php?t=907261&page=2
Basically did it exactly like how the OP fixed it, and the phone is currently being flashed.
But now I have a different problem, seems I can't get a break.
http://img651.imageshack.us/i/stuck.jpg/
It's stuck there, should I just wait? Is it supposed to take a while? Or is there a problem? Been there for about an hour now.
[EDIT] So the phone works now, but Odin won't flash for me. What could the problem be if it's stuck on Initializing (or rather, Initialzing as the program puts it)? I've tried 1.61, 1.7, used the DI18 file and removed the md5 bit so that the file ends in .tar, etc
Hey, so I've been desperately trying to return my Epic to stock DI18, and I tried clockwork mod which didn't work, and then I tried doing it through Odin, and it kept hanging on Initializing.
Anyway, I keep trying with Odin, and ended up taking out my battery and putting it back in, but now the phone won't turn on. It doesn't turn on normally, not through download mode, not recovery, nothing.
Any help? What can I do? I tried searching but every result ends up being about turning on bluetooth or wifi, etc., and the few that are related to bricking talk about going into download mode to flash with Odin.
I hope you didn't take the battery out while flashing odin...
you can't turn it on in any way right?
can you charge it via usb? maybe you just ran out of power while flashing?
Uh, yeah, that's exactly what I did. Every time Odin would hang at Initializing, I'd have to remove the battery and restart the phone to try again.
God, I am so stupid, it is ridiculous.
The battery did have a decent amount of charge last time I checked though.
Hold down 1 and power and insert battery while holding them. That should get you into d/l mode. Taking out the battery while odin is stuck on initializing does not harm the phone.
Sent from my Bonzai'd Epic 4g.
I just did something like what you said leather, and I got it into download mode.
Now I'm afraid to do anything. Any reason why my flashing through Odin wouldn't work?
Odin is picky about the computer its running on. I used a laptop when i first started flashing..no issues ever.
Fixed my desktop and instantly ran into odin problems. Try changing USB ports and make sure youve got no firewalls running.
Sent from my SPH-D700 using XDA App
Yeah, what I don't know how it happened or what happened, but I got a lot further. I started to get Odin failing at recovery and then remembered this thread which I found earlier: http://forum.xda-developers.com/showthread.php?t=907261&page=2
Basically did it exactly like how the OP fixed it, and the phone is currently being flashed.
But now I have a different problem, seems I can't get a break.
http://img651.imageshack.us/i/stuck.jpg/
It's stuck there, should I just wait? Is it supposed to take a while? Or is there a problem? Been there for maybe 5-6 minutes now.
The factory always takes the longest; so give it time. And do NOT pull the battery at that point. Youll have to say good bye epic :<
Sent from my SPH-D700 using XDA App
How did this end up? Did it move past FACTORY FS?
Nope, still stuck in that same exact place. Is it supposed to take this long or has something gone wrong?
Could I unplug it and try again at this point, or would that brick it? It's just stuck there, what do I do? I'd love to try different usb ports and such, but I can't if I don't stop this process, just don't know how to do it without bricking it.
And thanks for the help so far.
Did you remove the. Md5 at the end of the tar file?
Sent from my SPH-D700 using XDA App
No, I put the md5 back to start from the beginning with everything as it comes from downloads and such.
What do I do about it right now though? Can I safely unplug it and restart it or...?
Seems like you have no choice but to unplug it. Removing the md5 shouldn't make a difference. Try a different USB port.
Sent from my SPH-D700 using XDA App
Yeah, thankfully it didn't brick. I feel like I'm walking through a minefield with this thing.
Anyway, switched ports, had the file renamed to end in .tar, made sure Odin was opened as administrator in Windows 7, and thankfully it flashed fine.
Now I'm back at vanilla 2.1, can start fresh in terms of upgrading, was having some problems earlier. Is that GPS locking problem present in 2.3? Assuming I put ClockworkMod 3 on it and have the file system reset to EXT4, can I just flash to 2.3 ROMs right away?
Such problems
Hi everyone,
Skip this first paragraph if you just want to read my steps from problems to solution:
I hope this post helps people who were in the same situation I was in.
A few days ago I just happened to read the news about the new gingerbread for the AT&T i997 Samsung Infuse. I read that it wasn't over the air. Because of what has been seeming as a bluetooth leak after trying everything to stop the leak up to hard resetting it, I figured I'd pray that gingerbread fixes it. So on went my quest in the last few days trying to get this gingerbread update as fast as I could.
1) I downloaded keys mini for the Samsung device which was needed for the upgrade. I installed it on my main pc which is windows 7 64 bit. After installation, it's first run, it automatically updated the application.
2) I plugged in my phone via usb and it said device not registered so I got in contact with a Samsung rep in chat who told me to register it and it would take 24 hours.
3) I registered on Samsung and waited about 48 hours and still no change.
4) Got impatient and read about GTG Ultimate unbrick which is supposed to return my stock phone back to it's out of box condition which eliminated what I thought as an error with my phone of it not being registered.
5) Now after plugging it in after the unbrick. I got a message stating "device already up to date". I kept getting this for the last couple days. Sigh
6) Read that I could download the new gingerbread stock ROM without being rooted. Just had to use the ODIN3 I got with the GTG Ultimate unbrick zip file and supply the ROM I997UCKL2-Homebinary.tar.md5 as the input file.
7) Follow basically same instructions as unbricking but not reformatting and just supplying the md5 file as the input for hte PDA button then clicking start.
8) Odin 3 message status window was stuck at setupconnection and I knew this wasnt right. It was stuck for over 15 minutes and it should only do that for a minute or less.
9) Unplugged usb and big error in red on Odin 3 (but didn't have a choice)
10) Tried removing battery and retrying the flash but now a bigger issue the screen was all colored specs or in other words multi colored spots. Rut roh!
11) After scratching my head and googling like crazy some others had the same issue and they mentioned removing the battery and trying again but didn't mention that the spots would remain on the screen while the items could be flashed fine.
12) Tried again this time it got past setupconnection but was stuck at initializing.
13) Thought to myself let me try it on my Windows Vista 32 laptop.
14) Voila. It worked. So don't give up if you see the colored spots on your screen. There still is a chance. I now have gingerbread. THANKS EVERYONE!
Next Morning Update:
I was too quick to be happy. It seems I am one of the small few who is having touch sensitivity issues and lag typing on the lower right side of the screen especially with the back key (backspace). I typed my first reply to an email and the third word in the backspace was completely disabled.
Glad you got it working.
Am i the only one when i saw "what now" immediately thought about that lead paint commercial ?
iSaint said:
Am i the only one when i saw "what now" immediately thought about that lead paint commercial ?
Click to expand...
Click to collapse
GTG Ultimate unbrick zip is missing can u re-up it plz?
I know this is possible depending on the phone, but on the Vibrant I have not found a way to install clockwork mod without using USB. I saw that mobile odin was an option for some samsung phones but not the Vibrant.
My usb port is dead, no warranty etc. I bought it for 70 in like new condition with knowledge that the port was bad. I figured that the port needed to be soldered back down. But after taking the phone apart, I don't see anything wrong with it. Its not loose on the board, but the socket itself is loose inside.
The baseband is KA2 Eclair. I got it rooted with the oneclickroot tool.
On a side note, the phone also came with pictures of the seller and all his girlfriends naked . Not pretty
So let me review what you want to do, you want to install CWR without having a USB port. Seems easy enough.
Firstly, find a app that will let you connect to your phone to your computer, apps like Dropbox, Box, and this app i put up on these forums a bit ago will do more than just the job HERE
install one of those, which ever you like. I'll use the MIUI File Manager as a example throughout this post because its the easiest.
Open the app, go to the FTP and start service, go to your computer open MY COMPUTER and type in ftp://all your #'s
Put this file in your ROOT meaning just in sdcard/ no folders just drag and drop it in there. DO NOT RENAME,EXTRACT OR ANYTHING TO THE .ZIP just put it in the sdcard/
*Thanks for the CWR file from Woodrube and S15*
Now go into Recovery mode on your phone
Power + Volume up and down ( i think )
Press REINSTALL PACKAGES
It SHOULD say something like booting into clockwork recovery.
it will reboot, if it goes to clock work recovery, GREAT. If not, press Reinstall Packages AGAIN and it should directly go there.
Just reply if i'm explaining something wrong or if you need more help.
Or you could just download and install rom manager and flash clockworkmod through there. No offense xriderx, just seems like a lot of work to just install cwr that a single app can do as well.
djquick said:
Or you could just download and install rom manager and flash clockworkmod through there. No offense xriderx, just seems like a lot of work to just install cwr that a single app can do as well.
Click to expand...
Click to collapse
To each his own, Rom Manager never has worked great on my phone. Even bricked it completely once and I don't believe it was user error.
Relevant guide, +1 cookie. One suggestion though, organize the steps a bit further so there is a clear distinction between steps.
ie:
• Now go into Recovery mode on your phone, Power + Volume up and down ( i think )
• Press REINSTALL PACKAGES. It SHOULD say something like booting into clockwork recovery. it will reboot, if it goes to clock work recovery, GREAT. If not, press Reinstall Packages AGAIN and it should directly go there."
Anywho, to the OP: Since it's rooted, why aren't you simply downloading ROM Manager from the market and installing CWR from there?
edit/ beaten
Don't get me wrong, your tutorial is spot on, I just never had any problems with ROM manager before so I threw it out as a suggestion.
Sent from my Nexus S using xda premium
working on it now, big thanks!
TheEnternal said:
working on it now, big thanks!
Click to expand...
Click to collapse
As far as the port goes, Eugene, Krylon360 and myself all fried ours when we were porting the V4G - so you may not visibly see anything wrong with it at all.
Thanks guys, I ended up semi bricking the phone . Even though it was my 6th droid device. Not sure what I did, I was in recovery and everything was working, then went to reboot and it was stuck on the Galaxy screen, could no longer get into recovery. Too bad that USB port was out . I ended up just reselling it to a guy for parts and still made some profit off it. Shame though, that AMOLED display was beautiful. Ended up getting a G2X yesterday for 195, just missed one at 150 on craigslist. Already got it up with CM 7.2 with a minor OC. Hopefully towards then end of this year I might be able to get a Galaxy 2 for cheap.
hi.
pls need help.
have the same phone. my usb is not working too.
t-mobile vibrant t959.
its CM7.2 skang-kang flashed.
have issue with mute-unmute.
and need to get it back to froyo.
how to do it without usb?
card slot is working fine.
zukko said:
hi.
pls need help.
have the same phone. my usb is not working too.
t-mobile vibrant t959.
its CM7.2 skang-kang flashed.
have issue with mute-unmute.
and need to get it back to froyo.
how to do it without usb?
card slot is working fine.
Click to expand...
Click to collapse
Download the files you need to your phone and flash them
Sent from my HTC Sensation 4G using XDA
johnson8cyl said:
Download the files you need to your phone and flash them
Sent from my HTC Sensation 4G using XDA
Click to expand...
Click to collapse
i have tried this.
but gingerbread loader and froyo loader are different.
it gave an error at flashing and stopped flashing.
Hmmm. That would require fastboot huh. Don't know of a wireless way to use that. Is there an unroot procedure you could do from your sdcard without a cord and then re-root to gb perhaps?
Sent from my HTC Sensation 4G using XDA
and i'm asking for something like this.
but i ask for froyo not unroot.
to flash from sd card.
it gives an error
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5
it was necessary to remove it when upgrading to the clockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and updare-binary) to create working update zip packages.
installation aborted.
I don't think it is possible to downgrade to froyo from CM7 without ODIN. I might be wrong but that is how i remember it.
Though i did find this thread..
http://forum.xda-developers.com/showthread.php?t=1149158
But i don't know how that worked for people. You might wanna research a little bit more. IMO you are better off going to ICS.
Br1cK'd said:
Just use Odin, don't shortcut it. The OP here has a very very basic idea of the reason and necessity to change these files, and has not provided a complete set of steps in two different "guides" he has posted here, and nobody has been successful as per the reports.
Bottom line, save both yourself and dev in the future a headache, and just use Odin.
Click to expand...
Click to collapse
its very sad ((((
Just a reminder to some who have USB port problems. I'm not trying to insult anyone's intelligence here but remember Samsung phones are picky about USB cables.
I know because my phone was Semi bricked while doing Odin. Turned out my original Samsung cable went bad halfway through Odin'ing a new bootloader. After two months of playing with it I tried literally 5 different data cables that all fully worked for other phones and a few cheap off the street cables. Some would not even charge my vibrant but would work fine for data and charge on my wife's LG Quantum. Hard to find good micro-USB cables here in Peru. Finally I ended up modifying my original cable with another cable's micro-usb connector and wrapping a separate ground wire around the shield to get it to work. Samsung phones must require really good shielding to communicate and possibly not all cables have the shield connected on both sides or are properly shielded.
zukko said:
hi.
pls need help.
have the same phone. my usb is not working too.
t-mobile vibrant t959.
its CM7.2 skang-kang flashed.
have issue with mute-unmute.
and need to get it back to froyo.
how to do it without usb?
card slot is working fine.
Click to expand...
Click to collapse
Check out 'mobileODIN' on the market.
So, my neighbor bought an Acer A500 a few months back. He ended up not liking it so I bought it off of him. My tablet and I got really close and I fell in love. I started neglecting my girlfriend and all that. We had a beautiful relationship; my tablet and me. But, a couple days ago I was playing N.O.V.A 3 and it froze. I thought nothing of it and just powered it down. To my dismay, it froze at the Acer screen. I restarted it again and got the same thing. My life was over. My heart felt like it was ripped from my chest... I shed a manly tear.
I've tried vol- and power, vol+ and power, the reset button, D/Ling several different update.zip files and copying them to my SD. I've spent the last couple days reading and trying everything. All I get is the Droid guy with the blue thing swirling in his chest and then him laying on the ground with a red triangle and an exclamation point.
I'm told it's most likely not a hardware issue as things things are almost bullet-proof. But, I am pretty good at breaking things
Am I screwed or does someone have a miracle they can share. My gaming life depends on it.
-Dennis.
DennisPimps said:
So, my neighbor bought an Acer A500 a few months back. He ended up not liking it so I bought it off of him. My tablet and I got really close and I fell in love. I started neglecting my girlfriend and all that. We had a beautiful relationship; my tablet and me. But, a couple days ago I was playing N.O.V.A 3 and it froze. I thought nothing of it and just powered it down. To my dismay, it froze at the Acer screen. I restarted it again and got the same thing. My life was over. My heart felt like it was ripped from my chest... I shed a manly tear.
I've tried vol- and power, vol+ and power, the reset button, D/Ling several different update.zip files and copying them to my SD. I've spent the last couple days reading and trying everything. All I get is the Droid guy with the blue thing swirling in his chest and then him laying on the ground with a red triangle and an exclamation point.
I'm told it's most likely not a hardware issue as things things are almost bullet-proof. But, I am pretty good at breaking things
Am I screwed or does someone have a miracle they can share. My gaming life depends on it.
-Dennis.
Click to expand...
Click to collapse
Do you know what you were running on this thing? Was it stock Honeycomb, scock ICS, or was it running a custom ROM? (If so which one?)
Was it ever hooked up to your PC? (This would help with retrieving CPUID, if it was.) Do you know your CPUID? (Or SBK?)
You should at the least know the answers to these questions before you attempt any type of repair, as it is almost certainly salvageable, but you will almost certainly need your CPUID.
Danny2 said:
Do you know what you were running on this thing? Was it stock Honeycomb, scock ICS, or was it running a custom ROM? (If so which one?)
Was it ever hooked up to your PC? (This would help with retrieving CPUID, if it was.) Do you know your CPUID? (Or SBK?)
You should at the least know the answers to these questions before you attempt any type of repair, as it is almost certainly salvageable, but you will almost certainly need your CPUID.
Click to expand...
Click to collapse
I was running 4.0.1 ICS. I do have my cpuid and SBK. I tried flashing a new rom using blackthund3rs flash tool but it got to about 25% and stopped. I keep losing sync with my PCs, though.
DennisPimps said:
I was running 4.0.1 ICS. I do have my cpuid and SBK. I tried flashing a new rom using blackthund3rs flash tool but it got to about 25% and stopped. I keep losing sync with my PCs, though.
Click to expand...
Click to collapse
So, do you want to go back to stock, or to a custom ROM? If you wanna go stock, the easiest way would be load a 3.01 EUU, & upgrade on the play market to 4.03. That will prove it isn't a hardware issue. Alternatively, you could root, load a recovery, a bootloader, & flash a new ROM.
Danny2 said:
So, do you want to go back to stock, or to a custom ROM? If you wanna go stock, the easiest way would be load a 3.01 EUU, & upgrade on the play market to 4.03. That will prove it isn't a hardware issue. Alternatively, you could root, load a recovery, a bootloader, & flash a new ROM.
Click to expand...
Click to collapse
To be honest, I really don't care as long as I can getting it working again. But I would rather root it.
I think I can get it to work but neither one of my computers will recognize it. It shows up in APX and says something about recovery driver mode when I plug it into the laptop with Vista automatically downloads a driver and installs it again. I've tried turning off automatic driver install but that doesn't work for some reason. The one with XP Pro just shows up APX device but the APX Flash Tool by blackthund3r says it can't find it. I've downloaded the Acer Iconia 500 drivers and installed them but that doesn't work either. I'm at a loss.
Any tips would be great. I think I have a better chance using my laptop with XP, though. I also need to let you know that I truly do appreciate you trying to help. If you're ever in Columbus Ohio, let me know and I'll buy you a beer. lol
DennisPimps said:
To be honest, I really don't care as long as I can getting it working again. But I would rather root it.
I think I can get it to work but neither one of my computers will recognize it. It shows up in APX and says something about recovery driver mode when I plug it into the laptop with Vista automatically downloads a driver and installs it again. I've tried turning off automatic driver install but that doesn't work for some reason. The one with XP Pro just shows up APX device but the APX Flash Tool by blackthund3r says it can't find it. I've downloaded the Acer Iconia 500 drivers and installed them but that doesn't work either. I'm at a loss.
Any tips would be great. I think I have a better chance using my laptop with XP, though. I also need to let you know that I truly do appreciate you trying to help. If you're ever in Columbus Ohio, let me know and I'll buy you a beer. lol
Click to expand...
Click to collapse
Sorry,I thought I responded to this yesterday, but just now noticed I didn't.
Fire it up in APX mode, and install the 3.01 EUU from the development section, (Stock ROM listing) then simply follow the upgrade path to 4.03, then root. If you drivers are installed correctly, everything will work fine, if not, nothing will happen. If it does start to load the stock ROM, then fails with a write error after it attempts to write the bootsector, you may need to run Badsector, or babsector, depending where you look. Search the recent posts on this, you will find lots of stuff.
Danny2 said:
Sorry,I thought I responded to this yesterday, but just now noticed I didn't.
Fire it up in APX mode, and install the 3.01 EUU from the development section, (Stock ROM listing) then simply follow the upgrade path to 4.03, then root. If you drivers are installed correctly, everything will work fine, if not, nothing will happen. If it does start to load the stock ROM, then fails with a write error after it attempts to write the bootsector, you may need to run Badsector, or babsector, depending where you look. Search the recent posts on this, you will find lots of stuff.
Click to expand...
Click to collapse
How would I go about installing the EUU? I have nvflash and blackthund3r's flashing tools. But I can't seem to get my PC and tablet to connect. When I plug it into my PC without being in APX mode, it just says MTP Device. When I plug it in while in APX mode it does say something about Picasso Recovery Driver.
If you could explain things to me like I'm aN idiot, I'd really appreciate it.
Thanks,
Dennis
DennisPimps said:
How would I go about installing the EUU? I have nvflash and blackthund3r's flashing tools. But I can't seem to get my PC and tablet to connect. When I plug it into my PC without being in APX mode, it just says MTP Device. When I plug it in while in APX mode it does say something about Picasso Recovery Driver.
If you could explain things to me like I'm aN idiot, I'd really appreciate it.
Thanks,
Dennis
Click to expand...
Click to collapse
Sorry for late response, I watched for reply from yourself, but you didn't answer for 10 days, I lost track. Still need help?
Danny2 said:
Sorry for late response, I watched for reply from yourself, but you didn't answer for 10 days, I lost track. Still need help?
Click to expand...
Click to collapse
Yea, it's still bricked. I did finally get the flash tool to recognize it but it kept hanging up. I also tried Timmy Dean's EUU tool and that hangs up too. I did a little more research and found that I may have a faulty emmc. I ran babsector and got 'fatal error code 9 cannot format partition BCT.' I found a thread here that discusses how to write around the bad sectors using Linux. I'm going to give that a go... I've always wanted to learn Linux. Hey, I can't screw it up anymore than it already is, right? Again, thanks for your time and effort in trying to help.
Cheers,
Dennis
Hey, before you try that, try different USB cables and ports (if u haven't already)
I had a similar problem with my phone not maintaining stable USB link to PC... after 4 days I tried a diff USB cable and boom, snap, working.
Just a thought.....
Sent from my A500 using xda app-developers app
ericpeacock79 said:
Hey, before you try that, try different USB cables and ports (if u haven't already)
I had a similar problem with my phone not maintaining stable USB link to PC... after 4 days I tried a diff USB cable and boom, snap, working.
Just a thought.....
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
I'll give that a go, m8.
Thanks!
-Dennis
DennisPimps said:
I'll give that a go, m8.
Thanks!
-Dennis
Click to expand...
Click to collapse
Just wondering if you ever figured out the errors you were getting during flashing? Currently having the same issues when using babsector.
Hi guys, Last night I accidently unplugged my phone while installing ClockWORKMOD recovery. Now when I boot my device it is stuck on the Downloading screen. I tried everything including the posts here but the Odin software doesn't see my phone and removing the battery and reinstalling does nothing. I even wiped the phone and factory reset via the clockwork... No Luck. It will not install the Crash ROM either. I get error 7.
It seems like I bricked the phone but I know there is always a way back to life. At least I hope. Any help guys would be great.
thxs
Carlo
shpack said:
Hi guys, Last night I accidently unplugged my phone while installing ClockWORKMOD recovery. Now when I boot my device it is stuck on the Downloading screen. I tried everything including the posts here but the Odin software doesn't see my phone and removing the battery and reinstalling does nothing. I even wiped the phone and factory reset via the clockwork... No Luck. It will not install the Crash ROM either. I get error 7.
It seems like I bricked the phone but I know there is always a way back to life. At least I hope. Any help guys would be great.
thxs
Carlo
Click to expand...
Click to collapse
You need to properly install the correct drivers on your PC. There should be no reason that ODIN doesn't see your phone if they are installed correctly. A quick search of the forums should get you the proper drivers to install. You can also try Kies emergency recovery, but it is hit and miss. Good luck.
+1 if you can get into download you can Odin. Use the usb ports in the back of the pc. You might have to use a different computer also. For the life of me I can't get Odin on my pc to recognize the device but I have no problem with my laptop.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Wow, didn't we just fix this problem like 2-3 threads ago, IN THIS FORUM?
TheAxman said:
Wow, didn't we just fix this problem like 2-3 threads ago, IN THIS FORUM?
Click to expand...
Click to collapse
That's the thing, these exact same types of threads just keep rolling through one after the other...people don't search and they don't read. That's the reason they are in the situation they are in to begin with and it seems they just don't learn.
Fortunately, the AT&T S4 forum has come far enough along that the sticky threads and the threads like your guide can be linked for these people to put a little time into finding a solution for themselves. Most of them don't like it (they want it done for them), but if it is all they get, they will finally have to do something the right way on their own.
Actually, a few people are thankful for being pointed in the right direction, but most are still pissed because it means they have to do what they should have done in the first place...follow XDA rules, use the search function, and read. If you don't do everything for them and hand it to them on a plate they call you names and say you are a ****, unhelpful, etc... I just laugh about it because it becomes clear why their phone is F'ed up in the first place. The thing is, sometimes you just can't help people. Just every now and then, someone comes along that needs help and is willing to do things the right way.
You can NOT have kies drivers and samsung drivers loading at the same time, I do not use kies at all, and my pc has NEVER gave me a issue yet using odin, including in my G3 days. uninstall that worthless kies and proceed. If you have to use kies, load it as needed then remove it.
And as always with the lovely microsoft windows, after you un-install anything you have to reboot, for it to work properly.
Linux is my BUD!