Related
someone please tell me what does ADB stand for????????
i hate myself for being such a noob but what can i do?!?!?! whats adb pleaseeee...
and why is it that everytime i go into command prompt to try and do stuff with the phone it never finds "androidsdk"
ahh!!!!!
Frenzifun said:
someone please tell me what does ADB stand for????????
i hate myself for being such a noob but what can i do?!?!?! whats adb pleaseeee...
and why is it that everytime i go into command prompt to try and do stuff with the phone it never finds "androidsdk"
ahh!!!!!
Click to expand...
Click to collapse
How about you tell everyone what you are trying to do, and what you are typing in command prompt.
Android Debug Bridge....
Do you have Samsung drivers installed/setup?
Take a nice deep breath and do one learning step at a time. Android has a lot to teach. I would also encourage learning the phone use basics, reading up on things before attempting any mods. Welcome to android family.
Here is a good thread to start in.... http://forum.xda-developers.com/showthread.php?t=790004
tats_06 said:
Android Debug Bridge....
Do you have Samsung drivers installed/setup?
Take a nice deep breath and do one learning step at a time. Android has a lot to teach. I would also encourage learning the phone use basics, reading up on things before attempting any mods. Welcome to android family.
Click to expand...
Click to collapse
lol ... well i already opened another thread about how to put hebrew fonts on the phone to support hebrew instead of seing empty boxes on facebooks and websites and what not... my phone Was rooted, Was voodooed but there was force closing on things and market stopped working so i completely stocked the phone, only thing that doesnt work now is my phone memory which is on 0.00 which i read and you apparently have to root the phone all over again
so right now... the phone memory is my only issue, i guess i can live without hebrew if its too much of a hassle to install while rooted::
http://forum.xda-developers.com/showthread.php?t=480964
i have no idea how to work this^^^
i have the drivers installed like i said, i was able to odin, root, and voodoo, clockwork as well ofcourse. now phone is completely stock except for that memory issue.
http://forum.xda-developers.com/showthread.php?t=804457&highlight=phone+memory
completely got lost in this thread... so yeah, those are my problems with the phone at the moment. i wont mention the obvious of gps etc.
another awesome issue, everytime my phone is turned off and back on, it starts that set up process all over again... language; facebook; google... etc... why?
Once you install adb on your computer you have to go to change the path on your computer to point to that folder. Or you can change your directory to the one that holds the adb file from within the command prompt. This should allow you to run the commands.
The issue you are having with the memory on your phone is because voodoo did not completely uninstall. You can fix this by running the steps in this forum to uninstall voodoo. Don't try the one step zip, you are going to have to do the three step manual method to make this work. Don't forget the final step to wipe data.
Once this is done voodoo will be gone, memory should be back, and phone should stop resetting on every boot.
Obviously you aren't the only one to ever have these issues. But you can recover.
Good luck.
Sent from my SCH-I500 using XDA App
No intro
Here is what I did:
Wanted to flash new ROM, [ROM] Super Clean DI01 + AOSP apps, (Thanks to everyone who worked on it AND everyone on this forum cause Ive spent the past week reading the threads and felt confident enough in the info and the support to try).
BUT
when trying to download with ODIN (not certain if this was the right method, too late now) found that it did not work, couldnt see file when looking in the PDA browse.
STUPIDLY disconnected phone from computer while in DOWNLOAD MODE. You know, when the screen says "DONT DISCONNECT FROM TARGET". Apparently, the rebus string for "you dun f*cked up" is a phone symbol... a yellow triangle w/!...computer symbol.
What do I do to get back to fun?
Tried reboot, tried CWR reboot, tried Nandroid restore w/reboot still the YDFU symbol
*EDIT* I continued searching while awaiting a response and found this thread: Stuck on connection warning screen. This got me out of the YDFU screen into a nice force loop. Since I am not a -complete noob- I pulled a nandroid backup outta my hat and ...tada back to good, now to the fun!
I did a search and couldn't find much help.
I recently dropped my phone and the screen got a slight crack, so the insurance company sent me a new one.
I figured I'd use ROM manager to backup my old phone, and restore it on my new phone.
New phone restores, reboots, and gets stuck at the black Vibrant screen.
I can get back into recovery mode fine, but nothing seems to work.
I let it sit at the Vibrant screen for about an hour before I try again.
Its attempt 3 when I decided to come on this site for some help.
Specs:
Stock
Rooted
Launcher pro
Nothing too much to be confusing and brick, so wtf?
Oh and I understand I could use odin to reflash my phone, please please please don't suggest odin, because I don't own a PC, I own a mac. Please don't tell me to go out and buy a PC or to download a program that costs $50 to use PC programs on a mac. I could have told myself that kind of information.
HELP, my brand new phone is destroyed wahhhh
From the sound of it you still have your old phone. If so, rather than restore using nandroid, try downloading a copy of titanium backup to backup/restore your apps. I have found that sms restore does a good job restoring texts. For me those two apps get the job done restoring my info. Also, if you haven't, sync your contacts to google and they will auto sync upon load. Of course this all assumes you still have your old phone in working order. ..
Also, there are stock roms flashable via clockwork that basically do the same as odin. Check the ' bible' sticky for links.
Hope this helps
Sent from my SGH-T959 using XDA App
a400meter said:
From the sound of it you still have your old phone. If so, rather than restore using nandroid, try downloading a copy of titanium backup to backup/restore your apps. I have found that sms restore does a good job restoring texts. For me those two apps get the job done restoring my info. Also, if you haven't, sync your contacts to google and they will auto sync upon load. Of course this all assumes you still have your old phone in working order. ..
Also, there are stock roms flashable via clockwork that basically do the same as odin. Check the ' bible' sticky for links.
Hope this helps
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I still have my old phone in working order, but that doesn't help the fact that my new phone is stuck on bootup, and can only enter recovery mode...
yelowbottlecaps said:
I still have my old phone in working order, but that doesn't help the fact that my new phone is stuck on bootup, and can only enter recovery mode...
Click to expand...
Click to collapse
The only way I can think of that a nandroid restore would soft brick you, is because you have restored a version of android with a different kernel.
If the original phone had the original firmware (JFD), and the replacement had the most recent (JI6), this is what would be expected to happen.
Since you seem unable and unwilling to use Odin, your going to have to tell us more details (i.e. which versions of the firmware as related above were actually in play) before we can begin to help. If you don't know, well....
You can also simply take it back to a local T-Mobile store and do another swap, or you can find a friend with a Windows PC and Odin (or Samsung's Mini KIES with JI6). These are your only real options...
both phones had JI6
Thank you for the quick responses.
I'm not unwilling to use odin, but unless anyone knows of a free software to use PC programs on a mac, I'm SOL.
so, you got the new phone, rooted, got rom manager and then got clockwork recovery right?
You did a nandroid backup right (on the new phone), before flashing anything right?
Why not just download Fusion and flash that to get the phone up and running?
yelowbottlecaps said:
both phones had JI6
Thank you for the quick responses.
I'm not unwilling to use odin, but unless anyone knows of a free software to use PC programs on a mac, I'm SOL.
Click to expand...
Click to collapse
Well hmm....so much for guessing on my part. Crossing different build kernels is one sure fire way to brick...
Well, there is a solution for Mac and Linux for reloading firmware on a Samsung phone from Download Mode, an open project called Heimdall. It does everything Odin does, but without a GUI, so it depends on how comfortable you are with commandline/shell.
I'll pass you the relevant links so you can see for yourself what's going on.
[PROGRAM] Heimdall - Cross-Platform Open-Source Flashing Software (1.0.0 Available)
Heimdall's Website, with downloads...
XDA Dev Thread with JI6 Odin .tar file....
Best of luck!
s15274n said:
so, you got the new phone, rooted, got rom manager and then got clockwork recovery right?
You did a nandroid backup right (on the new phone), before flashing anything right?
Why not just download Fusion and flash that to get the phone up and running?
Click to expand...
Click to collapse
True that...Why didn't I think of that obvious ploy. If he can get into Recovery, and bounce over to clockwork...Well now's a good a time as any to try Bionix or Bionix Fusion...or a few other of the CW Recovery installable builds...Definitely easier than Heimdall or working out Odin on a mac....and definitely preferable to staring at a Vibrant logo...
{{facepalm}}
masterotaku said:
Well hmm....so much for guessing on my part. Crossing different build kernels is one sure fire way to brick...
Well, there is a solution for Mac and Linux for reloading firmware on a Samsung phone from Download Mode, an open project called Heimdall. It does everything Odin does, but without a GUI, so it depends on how comfortable you are with commandline/shell.
I'll pass you the relevant links so you can see for yourself what's going on.
Best of luck!
Click to expand...
Click to collapse
If there was a step by step walkthrough, I have no problem trying this out.
But I downloaded it and have no idea what I'm doing. Therefore, still SOL
^ are you? You didn't answer my questions.
I'm gonna guess and say you also dl'd the oclf from the market to root too... so now you can't get back into CwR... right?
If you can get adb to recognize your phone then your not SOL. Im not sure what the exact command lines would be but you could delete the update.zip and replace it with another ROM. GL
I just tried using Odin on my roommates PC. An error happened and now the phone is showing a picture of a phone, a couple dots, an exclamation mark, a couple dots, and a computer.
Nothing I can do is taking it out of this screen. Unplugged from computer, took out battery, took out sd card, put it back in... nothing
Am I bricked for good now?
This is a terrible day.
edit: i managed to be able to get the phone into download mode.
No you are not completely bricked! Honestly that is almost impossible on this phone. The only way you'll lose this phone is if YOU give up.
Just keep trying and take a few deep breathes. Take a break actually. Just redo the process from step one.
Edit: you're half way there. Just flash Eugene's froyo that doesn't brixk, reboot, flash JFD or JI6, reboot... then you'll be right back to out of the box status.
All~G1 said:
I'm gonna guess and say you also dl'd the oclf from the market to root too... so now you can't get back into CwR... right?
If you can get adb to recognize your phone then your not SOL. Im not sure what the exact command lines would be but you could delete the update.zip and replace it with another ROM. GL
Click to expand...
Click to collapse
If someone can back this up with some instructions that would be amazing.
All~G1 said:
No you are not completely bricked! Honestly that is almost impossible on this phone. The only way you'll lose this phone is if YOU give up.
Just keep trying and take a few deep breathes. Take a break actually. Just redo the process from step one.
Edit: you're half way there. Just flash Eugene's froyo that doesn't brixk, reboot, flash JFD or JI6, reboot... then you'll be right back to out of the box status.
Click to expand...
Click to collapse
Thank you for the motivation!
yelowbottlecaps said:
Thank you for the motivation!
Click to expand...
Click to collapse
No worries, we've all been there. It took me 6 hours lol. Best part is after you go through this once it will only take you 5-10 mins the next time. The hard part is just getting everything setup in the mist of anger, frustration, fear & panic.
All~G1 said:
No worries, we've all been there. It took me 6 hours lol. Best part is after you go through this once it will only take you 5-10 mins the next time. The hard part is just getting everything setup in the mist of anger, frustration, fear & panic.
Click to expand...
Click to collapse
and in the midst of a roommate that needs his pc back.
I still need a fix that would work for macs... if not, I'd have to wait for my roommate to let me bum his pc again
Do my posts not show up or something? wtf.
s15274n said:
Do my posts not show up or something? wtf.
Click to expand...
Click to collapse
/me pats s15274n on the back....don't get mad...get even! =P
Honestly, sounds like yelow's focusing on getting all the help s/he needs from All~G1. I wouldn't worry about it.
~SB
I know there are various threads like this one but my situation is a bit different. I tried using odin to clean install 2.2 to then use the custom rom epic experience. I attempted to install 2.2 using odin but it would get stuck in "setup connection" and I would have to quit and try again. Last time I tried my phone got the "phone connection caution computer" icon and to get into recovery I would have to hold the power and camera button, not the volume down button. When I go to try and install things straight from my SD card I would get an error like "status 7" cus I didn't have the sprint apps to install 2.2. I believe I get these errors installing straight from the card cus I rooted my phone, modifying the kernal cus I read somewhere because when trying to update, it tries to verify but can't cus things are missing or edited cus of the root. I can't try to use odin again because my computer can't recognize the phone anymore regardless reinstalling the samsung drivers. SOOOO, I'm basically ****ing stuck for sure I think. The way I access the SD card is by using an adapter. The only way I see this working is if I find a fix using the SD card, but it's looking slim cus of the stupid root.
I don't know much about this yet, as I'm still learning myself. Did you try using another usb port and are you putting the phone in download mode?. Restart the computer and the phone. Make sure odin is running before you plug in the phone as well. And try another usb port. Are you using the cable that came with the phone? That one trends to have problems for some people.
Edit: I don't believe your phone is bricked either, people tend to throw the word around to much because that arnt quite sure about the definition. Just hang in there and the community will help you get back up and running. Good luck
Sent from my shoe, I mean....Epic shoe... I mean Samsung Epic!
mxcoldhit said:
I don't know much about this yet, as I'm still learning myself. Did you try using another usb port and are you putting the phone in download mode?. Restart the computer and the phone. Make sure odin is running before you plug in the phone as well. And try another usb port. Are you using the cable that came with the phone? That one trends to have problems for some people.
Edit: I don't believe your phone is bricked either, people tend to throw the word around to much because that arnt quite sure about the definition. Just hang in there and the community will help you get back up and running. Good luck
Sent from my shoe, I mean....Epic shoe... I mean Samsung Epic!
Click to expand...
Click to collapse
You see, I'm out of options. Last thing I thought of was installing a custom rom 2.1 rom cus 2.2 roms need odin, but I try to install and I get a signature error or whatever. I'm about to throw the phone against the wall, crack the screen, and use my warranty and get a new phone cus I literally tried EVERYTHING. I spent my ****ing 8 hours of my saturday trying to fix this.
Try a different computer my new Dell XPS 9100 will never reconize my Epic, however, my wifes laptop will always reconize it. I know that sounds weird, I always thought I had a poblem with my phone but it ended up being my computer.
Sent from my SPH-D700 using XDA App
cbpagent72 said:
Try a different computer my new Dell XPS 9100 will never reconize my Epic, however, my wifes laptop will always reconize it. I know that sounds weird, I always thought I had a poblem with my phone but it ended up being my computer.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
omfg, I used my mom's lappy and the drivers worked. Meaning I can try and use an odin fix.
Odin can be tricky to use because of a few factors other than itself. 1) if you can, use a deskto pc and attach to a usb port literally on the motherboard, no front or pci, this may work, but this I what I found (reading countless threads) to be the most failsafe for everyone. 2) your sammy usb cable is for charging or non critical data transfer ONLY, as it is garbage... repeatedly proven in the threads. 3) reboot pc and phone, boot phone into download mode, (hold down 1. On physical keyboard and press power... DO NOT CONNECT YET! Start up odin, place files where needed (.pit, etc...) uncheck all but what you're told in the flashing instructions with the file you're flashing, most have awesome detals, but sometimes your little issue is resolved on page 50 of the thread... not in the OP. Ok so now plug in the usb connection, odin should find it. If it doesn't, search for drivers, uninstall, reinstall start over, OR you have a bad connection, refer back to usb port and cable. I have 1 out of 4 mobo usb ports that the drivers will maintain a connection to, so try another. Then, once odin has a connection, make sure you're following the guides to the T (and read all the posts)... after that, odin is your best friend. The problem lies elsewhere... odin is the goods. If you have run into problems maintaining connection, and plan to re-root, read all the one click posts and if it drops connection a lot, enter the commands in one by one, repeat if one fails till it sticks. There are way better guides, but you seem to have run into the same issues I did, and after hours and hours, I got that scary ass reconnect me now screen. Just read the whole threads, and if your problem hasn't already been resolved, post in the appropriate thread, so others may learn from your discoveries!
Don't give up, once you figure out the quirks of the relationship between your pc and phone, and of course meticulously follow instructions, your elation when successful will make you forget that pesky 'bricked' screen... trust me I got it too, and no matter how much everyone says you can't brick these following instructions on here... its still scary till it all works. If things are wonky, wipe, go back to DI18 and start over... or just sit tight for froyo roms... good luck!
Oh, and sorry for no links, but it would seem you've probly already read em all... not sure I can do links...
Maybe its just my eeepc that doesn't like the drivers, good luck! Sounds like you're on the way... oh don't forget with the drivers to let em install on connect, leave it plugged in for like 10 mins, unplug, it will then complain it wasn't done, reconnect, then after that finishes, reboot. Crazy drivers...
At least I got a computer recognizing my phone, so I can try and use odin. I've been trying to use this fix
http://forum.xda-developers.com/showthread.php?p=9755894#post9755894
and so far odin has been stuck at this one step "file analysis..."
Yeah I used that method to no avail, but it was about 3 pasts old at the time, so I figured id try
something more stable. Tried a couple dk17 roms, then went back to 2.1 and am now using syndicate xtreme. Id suggest going back to DI18, then go from there. Let me check for another post of mine, theres a dialer code I had to do too at one point...
Ok when doing one click root, someone suggested ##8778# in the dialer, then keyboard enter, then set UART to pda not modem. This and removing comodo firewall, all the sudden my intermittent connection was solid. Not responsible for what this does, but it worked for me. Never found out what it does..... still curious. So this may help you even in odin, try to flash di18 after doing this, then the all in one rom you're looking at...
Oddly enough, I managed to semi-brick my phone several hours ago - my wireless adapter was on the same USB header, and both the wireless adapter and the phone crapped out while trying to flash with Odin.
Thankfully I was still able to get into download mode, and plugging the phone into a different USB port worked fine.
After some more research, about 10 hours of it, odin finally cooperated with me after I downloaded about every kind of file that could make my phone work and finally got it into 2.1
I first flashed the stock kernal to get it working, then flashed stock 2.1
Now I'm that my phone isn't rooted anymore I tried installing 2.2 through the recovery menu and I still get error status 7. Any ideas?
Probly best to post in the thread for the package/rom you are trying to install... others using it should be able to help... or you can do a 2.1 rom and wait for a final froyo based rom... glad to hear you're not bricked... the only way I've heard you can absolutely do that with these is installing a GSM rom or something crazy like that... but non-functional phone is scary regardless...
ungovernable1977 said:
Probly best to post in the thread for the package/rom you are trying to install... others using it should be able to help... or you can do a 2.1 rom and wait for a final froyo based rom... glad to hear you're not bricked... the only way I've heard you can absolutely do that with these is installing a GSM rom or something crazy like that... but non-functional phone is scary regardless...
Click to expand...
Click to collapse
Alright I completely fixed my phone. After I rooted my phone on 2.1, I then used odin v1.6 to install the froyo .tar file into pda and it worked. I then rooted it again so now I'm back to normal. Honestly, I did so many things I forgot what I did but I now have my phone functional. Thanks for help everyone, I greatly appreciate it!
I don't think I've bricked my phone, I hope you can help me. Done some reading here, but still a big time noob! Trying to flash back to stock for the Verizon upgrade, my phone is stuck on the screen with a gold triangle and a exclamation point in the center of a cell Phone and a computer. I found a thread with a similar problem. I can't seem to have a successful flash in odin. I keep getting a fail when i flash the test file. I would be content if I could just get the phone to boot and have my Miunia Rom working again. Someone please help.
Al bergie man1 said:
I don't think I've bricked my phone, I hope you can help me. Done some reading here, but still a big time noob! Trying to flash back to stock for the Verizon upgrade, my phone is stuck on the screen with a gold triangle and a exclamation point in the center of a cell Phone and a computer. I found a thread with a similar problem. I can't seem to have a successful flash in odin. I keep getting a fail when i flash the test file. I would be content if I could just get the phone to boot and have my Miunia Rom working again. Someone please help.
Click to expand...
Click to collapse
That means you have no kernel our rom in the phone. Not sure what this "test file" you are trying to flash is, but I'm not surprised its failing. Flashing dl 17 should work. If not, flash the ec07 leak, with the proper pit file, repartition unchecked. Then flash dl17.
Dished out by my dumb digits
now it's worse, I hit the dark abyss
So, I flashed(with odin) the clean Eco7 stock with with the correct pit file. It seemed to be doing fine, it got all the way to recov.bin but then I froze there for about an hour. At this point i didn't think it was going to pass anyway so i unplugged the phone and stopped the program(oops?). Now my phone is even worse, it seems lifeless. The phone won't even go to down load mode. I found on another post where someone else was also getting nothing, no power just blackness, and I followed those directions. Still a black screen. It seems more grim than ever! One thing I have noticed that while attempting to flash, a few times my computer completely rebooted. Out of know where! This has happened about 5 or 6 times. I'm just about ready to turn on my old flip phone but I just don't want to give up yet! Any more suggestions?!
Oops, is right. You may have hard bricked yourself. I've tried helping people out of this one before, with no sucess. That is the reason I told you to make sure repartition was unchecked. You can try to power on, and issue an adb command, if you have it installed. But, I doubt it will work. The reason you don't have download, at this point, is because you don't have a secondary bootloader on your phone, anymore. It turns into a catch 22. Download mode is supposedly hard written on the chip. So, you could use a jig to force it into download mode. I'd say that that is your best bet, at this point.
did uncheck repartition
I did uncheck repartition but obviously with no avail. I Will try the"jig" but I don't know anything about it. Is this a file I can download or what?
No matter what happens, thanks soooo much for the efforts to help me!!! Especially wolf??
No. A jig is a piece of hardware. Do a youtube search for 'download mode jig' and you''' get some good hits. You'd have to construct it, or get ahold of some of the devs that have. I don't recall the name, but one dev made one for the Fascinate. I'd imagine it would work for our phone too.
If anyone can remember who it is (I want to say Adam Outler, but I might be wrong) pipe up.
So, my neighbor bought an Acer A500 a few months back. He ended up not liking it so I bought it off of him. My tablet and I got really close and I fell in love. I started neglecting my girlfriend and all that. We had a beautiful relationship; my tablet and me. But, a couple days ago I was playing N.O.V.A 3 and it froze. I thought nothing of it and just powered it down. To my dismay, it froze at the Acer screen. I restarted it again and got the same thing. My life was over. My heart felt like it was ripped from my chest... I shed a manly tear.
I've tried vol- and power, vol+ and power, the reset button, D/Ling several different update.zip files and copying them to my SD. I've spent the last couple days reading and trying everything. All I get is the Droid guy with the blue thing swirling in his chest and then him laying on the ground with a red triangle and an exclamation point.
I'm told it's most likely not a hardware issue as things things are almost bullet-proof. But, I am pretty good at breaking things
Am I screwed or does someone have a miracle they can share. My gaming life depends on it.
-Dennis.
DennisPimps said:
So, my neighbor bought an Acer A500 a few months back. He ended up not liking it so I bought it off of him. My tablet and I got really close and I fell in love. I started neglecting my girlfriend and all that. We had a beautiful relationship; my tablet and me. But, a couple days ago I was playing N.O.V.A 3 and it froze. I thought nothing of it and just powered it down. To my dismay, it froze at the Acer screen. I restarted it again and got the same thing. My life was over. My heart felt like it was ripped from my chest... I shed a manly tear.
I've tried vol- and power, vol+ and power, the reset button, D/Ling several different update.zip files and copying them to my SD. I've spent the last couple days reading and trying everything. All I get is the Droid guy with the blue thing swirling in his chest and then him laying on the ground with a red triangle and an exclamation point.
I'm told it's most likely not a hardware issue as things things are almost bullet-proof. But, I am pretty good at breaking things
Am I screwed or does someone have a miracle they can share. My gaming life depends on it.
-Dennis.
Click to expand...
Click to collapse
Do you know what you were running on this thing? Was it stock Honeycomb, scock ICS, or was it running a custom ROM? (If so which one?)
Was it ever hooked up to your PC? (This would help with retrieving CPUID, if it was.) Do you know your CPUID? (Or SBK?)
You should at the least know the answers to these questions before you attempt any type of repair, as it is almost certainly salvageable, but you will almost certainly need your CPUID.
Danny2 said:
Do you know what you were running on this thing? Was it stock Honeycomb, scock ICS, or was it running a custom ROM? (If so which one?)
Was it ever hooked up to your PC? (This would help with retrieving CPUID, if it was.) Do you know your CPUID? (Or SBK?)
You should at the least know the answers to these questions before you attempt any type of repair, as it is almost certainly salvageable, but you will almost certainly need your CPUID.
Click to expand...
Click to collapse
I was running 4.0.1 ICS. I do have my cpuid and SBK. I tried flashing a new rom using blackthund3rs flash tool but it got to about 25% and stopped. I keep losing sync with my PCs, though.
DennisPimps said:
I was running 4.0.1 ICS. I do have my cpuid and SBK. I tried flashing a new rom using blackthund3rs flash tool but it got to about 25% and stopped. I keep losing sync with my PCs, though.
Click to expand...
Click to collapse
So, do you want to go back to stock, or to a custom ROM? If you wanna go stock, the easiest way would be load a 3.01 EUU, & upgrade on the play market to 4.03. That will prove it isn't a hardware issue. Alternatively, you could root, load a recovery, a bootloader, & flash a new ROM.
Danny2 said:
So, do you want to go back to stock, or to a custom ROM? If you wanna go stock, the easiest way would be load a 3.01 EUU, & upgrade on the play market to 4.03. That will prove it isn't a hardware issue. Alternatively, you could root, load a recovery, a bootloader, & flash a new ROM.
Click to expand...
Click to collapse
To be honest, I really don't care as long as I can getting it working again. But I would rather root it.
I think I can get it to work but neither one of my computers will recognize it. It shows up in APX and says something about recovery driver mode when I plug it into the laptop with Vista automatically downloads a driver and installs it again. I've tried turning off automatic driver install but that doesn't work for some reason. The one with XP Pro just shows up APX device but the APX Flash Tool by blackthund3r says it can't find it. I've downloaded the Acer Iconia 500 drivers and installed them but that doesn't work either. I'm at a loss.
Any tips would be great. I think I have a better chance using my laptop with XP, though. I also need to let you know that I truly do appreciate you trying to help. If you're ever in Columbus Ohio, let me know and I'll buy you a beer. lol
DennisPimps said:
To be honest, I really don't care as long as I can getting it working again. But I would rather root it.
I think I can get it to work but neither one of my computers will recognize it. It shows up in APX and says something about recovery driver mode when I plug it into the laptop with Vista automatically downloads a driver and installs it again. I've tried turning off automatic driver install but that doesn't work for some reason. The one with XP Pro just shows up APX device but the APX Flash Tool by blackthund3r says it can't find it. I've downloaded the Acer Iconia 500 drivers and installed them but that doesn't work either. I'm at a loss.
Any tips would be great. I think I have a better chance using my laptop with XP, though. I also need to let you know that I truly do appreciate you trying to help. If you're ever in Columbus Ohio, let me know and I'll buy you a beer. lol
Click to expand...
Click to collapse
Sorry,I thought I responded to this yesterday, but just now noticed I didn't.
Fire it up in APX mode, and install the 3.01 EUU from the development section, (Stock ROM listing) then simply follow the upgrade path to 4.03, then root. If you drivers are installed correctly, everything will work fine, if not, nothing will happen. If it does start to load the stock ROM, then fails with a write error after it attempts to write the bootsector, you may need to run Badsector, or babsector, depending where you look. Search the recent posts on this, you will find lots of stuff.
Danny2 said:
Sorry,I thought I responded to this yesterday, but just now noticed I didn't.
Fire it up in APX mode, and install the 3.01 EUU from the development section, (Stock ROM listing) then simply follow the upgrade path to 4.03, then root. If you drivers are installed correctly, everything will work fine, if not, nothing will happen. If it does start to load the stock ROM, then fails with a write error after it attempts to write the bootsector, you may need to run Badsector, or babsector, depending where you look. Search the recent posts on this, you will find lots of stuff.
Click to expand...
Click to collapse
How would I go about installing the EUU? I have nvflash and blackthund3r's flashing tools. But I can't seem to get my PC and tablet to connect. When I plug it into my PC without being in APX mode, it just says MTP Device. When I plug it in while in APX mode it does say something about Picasso Recovery Driver.
If you could explain things to me like I'm aN idiot, I'd really appreciate it.
Thanks,
Dennis
DennisPimps said:
How would I go about installing the EUU? I have nvflash and blackthund3r's flashing tools. But I can't seem to get my PC and tablet to connect. When I plug it into my PC without being in APX mode, it just says MTP Device. When I plug it in while in APX mode it does say something about Picasso Recovery Driver.
If you could explain things to me like I'm aN idiot, I'd really appreciate it.
Thanks,
Dennis
Click to expand...
Click to collapse
Sorry for late response, I watched for reply from yourself, but you didn't answer for 10 days, I lost track. Still need help?
Danny2 said:
Sorry for late response, I watched for reply from yourself, but you didn't answer for 10 days, I lost track. Still need help?
Click to expand...
Click to collapse
Yea, it's still bricked. I did finally get the flash tool to recognize it but it kept hanging up. I also tried Timmy Dean's EUU tool and that hangs up too. I did a little more research and found that I may have a faulty emmc. I ran babsector and got 'fatal error code 9 cannot format partition BCT.' I found a thread here that discusses how to write around the bad sectors using Linux. I'm going to give that a go... I've always wanted to learn Linux. Hey, I can't screw it up anymore than it already is, right? Again, thanks for your time and effort in trying to help.
Cheers,
Dennis
Hey, before you try that, try different USB cables and ports (if u haven't already)
I had a similar problem with my phone not maintaining stable USB link to PC... after 4 days I tried a diff USB cable and boom, snap, working.
Just a thought.....
Sent from my A500 using xda app-developers app
ericpeacock79 said:
Hey, before you try that, try different USB cables and ports (if u haven't already)
I had a similar problem with my phone not maintaining stable USB link to PC... after 4 days I tried a diff USB cable and boom, snap, working.
Just a thought.....
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
I'll give that a go, m8.
Thanks!
-Dennis
DennisPimps said:
I'll give that a go, m8.
Thanks!
-Dennis
Click to expand...
Click to collapse
Just wondering if you ever figured out the errors you were getting during flashing? Currently having the same issues when using babsector.