[Q] Clockworkmod "backup current ROM" problems - Fascinate General

So I am following this guide here: http://www.androidpolice.com/2010/0...d-phone-with-rom-manager-full-backup-restore/
that shows how to root/backup/install custom ROMs
I followed root instructions via this tutorial: http://www.droidforums.net/forum/sa...ent/79811-newbie-guide-rooting-fascinate.html
everything seemed to go fine although i dont know how to check if i successfully rooted or not.
**NOTE**while my phone was plugged in the usb port, for some reason my computer kept making the disconnect/reconnect sound as if i kept unplugging the chord. I tried the only 2 USB ports I had with same results. my laptop is 5 years old
The main guide(first link) linked me to this clockworkmod backup tutorial to backup my current stock phone state. HERE:http://www.androidpolice.com/2010/0...nandroid-backup-and-clockworkmod-rom-manager/
Now here is the problem. everything seemed to work fine up until the step titled "my first backup"(scroll down). here is what happens:
1)hit "backup current rom"> backup name is a bunch of numbers>select ok.>
2) allow superuser request>
3) then it goes to a screen with a white triangle surrounding an exclamation point and a little android guy and this message:
Android system recovery <2e>
Samsung Recovery Utils
-For BML-
reboot system now(only thing i have tried to select-just boots back normally)
apply sdcard;update.zip
wipe data/factory reset
wipe cache partition
--Install from package...
Finding update package...
verifying update package...
E:failed to verify while-file signature
E:signature verification failed
Installation aborted
sorry for the length but i had to be thorough.

You didn't flash clockwork with Odin, did you? That's the only way to get clockwork going. Can't just do it with ROM Manager

Can u plz elaborate ? How do I flash clockwork thru Odin? I've done flashing new firmware thru odin! How to flash clockwork and wotz to be selected in odin?
Sent from my GT-I5800 using Tapatalk

Try looking in the development section. There is a sticky with walk through instructions on flashing Clockwork.

Kevin Gossett said:
You didn't flash clockwork with Odin, did you? That's the only way to get clockwork going. Can't just do it with ROM Manager
Click to expand...
Click to collapse
i was just following that tutorial to backup my stock phone in the third link. why would they have left out an important step like that?

That may just be the general process for android, but for our particular phone you have to flash with odin

Related

CWM not working

I have been having issues with CWM on my Fascinate for about 2 weeks now. Whenever I try to flash anything via CWM I get this message:
Samsung Recovery Utils
- for BML -
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
The "reboot system now" is highlighted and I cannot do anything to select apply update.zip
On the bottom part of the screen it says:
Install from package...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
Now I have flashed back to D101 and did the ota update to DL09, and flashed the CWM via odin posted on a thread from the android central forum, it is basically a version of CWM for DL05 and DL09. (can't post outside links so I havent posted enough in this forum).
I have tried to apply the update.zip but whenever I do that, after about 25% of the way through it goes back to the error.
I have completely run out of ideas and the people at the android central forums have as well. I have tried everything that I can think of but obviously I am not doing something right.
Can anyone give me some suggestions as to what I can do to try to resolve this issue? Or if there is a way to flash a rom and kernel without CWM. I really do not want to be stuck with stock Fascinate so anything would be appreciated.
Thank you
You have to go into CWM immediately after flashing in Odin, before booting up, and flash a new kernel. DL09 breaks CWM on the stock kernel
Sent from my SCH-I500 using XDA App
I had that same issue until a user on another forum informed me that right after flashing cwm, replace battery and go immediately into recovery mode, do not let the phone boot normally.
Now I am able to add kernels and roms to my hearts content.
I'm in a similar situation except my error comes while trying to back up my ROM.
I did root via pushing rage.bin via ADB
Then I used ODIN to put CWMrecovery.tar on the phone.
Flashed CWM via ROM Manager.
At this point I did a full backup with TiBu and did a ROM Backup via ROM Manager.
After that I froze bloatware, 'upgraded' to the Sywpe Beta and De-binged.
At about this point I realized that I had lost Haptic so I flashed the DL09 stock Kernel and that problem was solved. I thought I was good to go until I tried to do another backup via ROM Manager.
When I ran the backup I got the same error as the OP. I ended up in 2e recovery. Since I'm new to this I just chose reboot phone. I did some searching last night but all the posts I found dealt with people flashing custom ROMs and I was getting tired I called it a night with the plans to do more searching today but then I came across this post.
I reviewed my notes and saw the other thread about CWM Recover mode and I checked and I can't reboot into CWM Recovery (via ROM Man) either. I end up in Android (2e) recovery.
I saw the post above me and I need to search on these instructions so I understand this step better.
"I had that same issue until a user on another forum informed me that right after flashing cwm, replace battery and go immediately into recovery mode, do not let the phone boot normally."
I don't seem to be able to boot (up and down key = Power buttong) into any recovery.
It seems like I need to repush CWM via Odin and then reflash via Rom Man but I'm leaving for a trip tomorrow so I'll wait for some input before trying anything since the phone is functionally working.
I'm new to rooting phones so some help with this error would be appreciated.
ezas said:
I'm in a similar situation except my error comes while trying to back up my ROM.
My phone is updated OTA DL09. Then rooted via ADB. I installed ROM Manager and flashed CWM. Since then I've done the usual root stuff. I noticed that haptic was not working and I fixed that by flashing a stock DL09 kernel. I have not flashed a custom ROM.
After de binging yesterday I went todo a back up via ROM Manager and got the same error as the OP. I ended up in 2e recovery. I didn't want to really screw up my phone guessing so I just chose reboot phone.
I was going to do more searching tonight but came across this post first.
I have done two successful back ups via ROM Manager, so after reading this post I assume it's flashing the kernel that got me to this error.
I'm new to rooting phones so some help with this error would be appreciated.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I don't use custom roms on my phone but from what I'm gathering on this...
You will need to put it back to DL09 stock...
Flash CWM via Odin..
http://forum.androidcentral.com/ver...s-hacks/54659-how-rooting-your-fascinate.html
Post 4 here will tell you how to do it.
After flashing CWM you will need to put your phone into recovery right away instead of letting the normal rom load. You will then flash over another kernel using CWM and that is it.
List of kernels can be found here:
http://www.samsungfascinateforum.com/custom-roms/list-of-custom-dj05-kernels-for-verizon-fascinate/
I have never put a new kernel or rom on my phone but from what i've read this is the jist of it.
You shouldn't have to flash back to stock...
1. Download all necessary files and place on root of your SD card (nonstock kernel, update.zip)
Edit: also add in the superuser and busybox zips, and flash those after kernel (step 5) and this will give you root back if you lost it updating
2. Flash modified CWM .tar with Odin
3. Replace battery and boot directly into recovery by holding both volume buttons down while powering on
4. Once in recovery, apply update.zip to get into CWM
5. Flash new kernel
6. Reboot, enjoy
Kevin and Rob
I followed the instructions to the letter over at AndroidCentral (including flashing busybox_su) and I'm back up and running with Haptic feedback and I'm watching a ROM backup via ROM Manager as I type this. I have not done a lot of testing yet but everything seems to be working fine.
Thanks for all the help.
Kevin Gossett said:
You have to go into CWM immediately after flashing in Odin, before booting up, and flash a new kernel. DL09 breaks CWM on the stock kernel
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Just did that and after I select Install zip from SD car, the screen goes black. When I press the home button it goes back to the green list but when I select anything from there, the screen goes black again.
I have tried flashing back to stock, updating to DL09 and flashing cwm again, but same issue.
OK I am getting really tired of dealing with this. Nothing I try works. I am just going to give up on the idea of installing roms and kernels on my fascinate. I have no idea what the problem is and nobody knows either.
Thanks for all those that helped.
When in CWM the home button turns the screen off. Use the back button or power button to select
Kevin Gossett said:
When in CWM the home button turns the screen off. Use the back button or power button to select
Click to expand...
Click to collapse
Shh, I had no idea about that. I assumed since in order to get to cement recovery you had to press home key that that is what you use while in recovery. Everything works now, thank you.
ok, I'm ready to sell this damn Fascinate on Craigslist for a peanut butter sandwich. I'm miffed with getting CWM working. I have pushed the updated version onto the phone via ODIN, immediately booted into recovery (got the red recovery), and it won't mount my SD card. I had a similar problem in green recovery - it could see my SD card, but wouldn't show me all the files - including the download folder. So I couldn't flash anything. I've tried this 100 different ways. There's nothing wrong with the SD card. It reads fine in the phone, files working other than CWM. Please help. I'm stuck on stock. Have mercy.
gadgetmom88 said:
ok, I'm ready to sell this damn Fascinate on Craigslist for a peanut butter sandwich. I'm miffed with getting CWM working. I have pushed the updated version onto the phone via ODIN, immediately booted into recovery (got the red recovery), and it won't mount my SD card. I had a similar problem in green recovery - it could see my SD card, but wouldn't show me all the files - including the download folder. So I couldn't flash anything. I've tried this 100 different ways. There's nothing wrong with the SD card. It reads fine in the phone, files working other than CWM. Please help. I'm stuck on stock. Have mercy.
Click to expand...
Click to collapse
Download updated CWM at this post: http://forum.xda-developers.com/showthread.php?t=942021
Fixed my CWM problems.
That is the file I used. Relief
Tried both through Odin and loading onto phone. No dice.
That is the file I used. Relief
Tried both through Odin and loading onto phone. No dice.
the home key always turns the screen off, u have to hit search button to turn on and go back
OK, just to make sure I'm not crazy, I tried again. First I downloaded the SuperClean 2.2 update to my SD card. I re-downloaded the updated update.zip file and put it at the root of my SD card. I flashed DL09.tar.md5 via Odin to get back to stock. That completed with no problem. I flashed the EB01 radio, no problem. Flashed the updated CWM. Immediately booted into recovery (red). Attempted to Apply update.zip. Errored out. Attempted to apply update from SD card. Here's the error I'm getting:
-- Install from SDcard...
Finding update package...
E:Can't mount/dev/block/mmcblk1p1 (or dev/block/mmcblk0)
(Invalid Argument)
E: Can't mount SDCard:Update.zip
Installation aborted
gadgetmom88 said:
OK, just to make sure I'm not crazy, I tried again. First I downloaded the SuperClean 2.2 update to my SD card. I re-downloaded the updated update.zip file and put it at the root of my SD card. I flashed DL09.tar.md5 via Odin to get back to stock. That completed with no problem. I flashed the EB01 radio, no problem. Flashed the updated CWM. Immediately booted into recovery (red). Attempted to Apply update.zip. Errored out. Attempted to apply update from SD card. Here's the error I'm getting:
-- Install from SDcard...
Finding update package...
E:Can't mount/dev/block/mmcblk1p1 (or dev/block/mmcblk0)
(Invalid Argument)
E: Can't mount SDCard:Update.zip
Installation aborted
Click to expand...
Click to collapse
I think I see what your issue is. The red CWM that you loaded via ODIN installs onto the phone itself. You no longer need an update.zip file containing CWM on your sdcard. As long as you have successfully booted into red CWM, your next step is to do a full wipe, and then choose the "install zip from sdcard" option. You should then be able browse your sdcard and select the zip file containing the rom.
DO NOT rename the zip file containing the rom to update.zip and then select the "apply update.zip" option, as that will definitely not work. That option expects to find the CWM recovery app in the update.zip file, and errors out if it's anything else.
Posted from my EB01 SuperClean Fascinate with Voodoo
Oh, and make sure you have the most recent new CWM file from jt1134. The post from him that had the first fixed CWM I think may have required an update.zip file, but the current, updated files in it do not. If you're not sure, download the latest one from that post for Odin, and flash it from Odin again. You will them no longer need update.zip for sure.
Posted from my EB01 SuperClean Fascinate with Voodoo
Roblovesbox said:
I don't use custom roms on my phone but from what I'm gathering on this...
You will need to put it back to DL09 stock...
Flash CWM via Odin..
http://forum.androidcentral.com/ver...s-hacks/54659-how-rooting-your-fascinate.html
Post 4 here will tell you how to do it.
After flashing CWM you will need to put your phone into recovery right away instead of letting the normal rom load. You will then flash over another kernel using CWM and that is it.
List of kernels can be found here:
http://www.samsungfascinateforum.com/custom-roms/list-of-custom-dj05-kernels-for-verizon-fascinate/
I have never put a new kernel or rom on my phone but from what i've read this is the jist of it.
Click to expand...
Click to collapse
Awesome, thanks for the links.

Help Installing ROMs PLEASE

I am stuck...
Ive tried installing two different ROMs on my Fascinate and get the same error when doing both and i cant figure out why.
I have tried installing the DL09 and DJ05 both getting this error:
E:failed to verify whole-file signature
Esignature verification failed
Installation aborted.
The options up top are:
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
I thought that there was a way to bypass the signature but am unsure of the steps.
I have also tried uninstalling CWM and pulled the battery and then tried running both the ROMs and still got the same error...
Any ideas?
Have you flashed both parts of CWM? You need to flash it via Odin as well as use ROM Manager. The part through ROM Manager downloads the update.zip file, so you could just download the update.zip from somewhere else if you didn't want to use ROM Manager.
After that, you should be set to go. Also, you should have posted in the General section.
are you applying the update to get in cwm recovery? then going to install zip from sd card?
http://forum.xda-developers.com/showthread.php?t=897889
Step 2.
Or there are many more posts/guides/questions about this in the General section. Cheers.
Did you have any success with the suggestions here or are you still stuck?
Sent from my SCH-I500 using XDA App
follow the link from the above poster.
0. Is your phone rooted?
1. Have you flashed the radio?
2. Have you installed clockwork rom manager?
3. You should be flashing ROM via the clockwork recovery not samsung recovery
Thread moved to Q&A.
jstewart807 said:
E:failed to verify whole-file signature
Esignature verification failed
Installation aborted.
Click to expand...
Click to collapse
This happens when you are coming from a stock ROM that does not have Clockwork Mod installed properly.
You need to install Clockwork Mod. You need to flash via Odin, as well as in ROM Manager. Follow these instructions in post #1:
http://forum.xda-developers.com/showthread.php?t=788099

Having problems flashing anything to my phone

I am running DL09, everything is stock. I rooted my phone, and flashed cwm via odin. Then I installed cwm from the market and from cwm flashed recovery. Via cwm i tried to flash an updated version of cwm, but it didn't work, then I tried to flash the leaked dl30 - it also didn't work. everytime i try to flash anything, i get the following error message:
E: Failed to verify whole-file signature
E: signature verification failed installation aborted.
the top of the screen (when i boot into recovery from the rom manager) says
Android system recovery (2e)
Samsung recovery Utlis
- for BML -
also, when I try to select anything, it only recognized the home soft key as enter.
my only options are
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
what has gone wrong?
I have the same problem. Adrynalyn said something about dl09 being sneaky and killing the cwm loader, so the first boot after running odin we are supposed to flash a clean kernel... I haven't tried it yet, been busy, but I will this weekend before flashing froyo.
Sent from my SCH-I500 using XDA App
I had the same blue text screen with those for options this morning when looking to wipe batt stats. I went ahead and selected the sdcard option, and next thing I know I'm looking at the gen text again with the complete list of options. Maybe try that?
Mmmmm...Froyo!

Getting ClockWorkMod to work

Hi Folks,
I'm trying to get clockwork installed on a rooted stock firmware vibrant for a friend. Using ROM manager i've tried to install CWM and it says it is successful, however after trying to reboot into recovery and choosing re-install packages I get these errors:
E:Failed to verify Whole File Signature
E:signature verification failed
Installtion aborted
I tried flashing Vibrant (MTD) Clockwork Recover 3.x from ROM manager but it does the same thing.
Also tried the AIO tool from the sticky in the dev section and it doesn't work either. I chose the custom ROM but it doesn't push it to the phone or reboot it into recovery. (The install drivers option gave me a windows unhandled exception error)
I downloaded Heimdall but am not sure how it's used, can it flash any ROM or only specially formatted ones?
I've been searching these forums for a few days now and finding so much new and old processes to do things and I'm not very familiar with Samsung phones so any help is appreciated. Thank-you.
Re-Root it
Re-root the phone using One-click, when Baywolfs fails, one click always does it because it push's it through using ADB
CWM wont work unless the phone is proper ROOTED, youll know when its done right, cause youll see the super=user App after your done
Link: http://forum.xda-developers.com/showthread.php?t=739300
After that, un-install Rom manager, then re-install it, then while your connected to WIFI or provider, make sure you flash CWM recovery,
Re- download the ROM again, but dont open it!!
Then when you are ready to flash that ROM as a zipped file, DO NOT open it [ meaning UNZIP] or you'll continue to get the signature error.
Then either flash using reboot into recovery or install using CWM option of sd card install, either or works!! .
Are you having trouble getting past the stock 3e recovery? I've been trying to get past it for a few days but have been poking around learning the in/outs of this. I have not yet gotten Rom Manager to properly flash CWM Recovery... the stock 3e is stubborn. Once CWM recovery is done, your options open up for backups, restores and installing some custom roms.
I don't know what the solution is but I'm still looking around.
Hope this was on track...
Its stuborn in the sense its picky about free space. You'll need to free up some room in order to use CWM. Reference this thread for guidance -
http://forum.xda-developers.com/showthread.php?t=925400

Installing ROM error, what am I doing wrong?

Hey,
I recently rooted my phone GS2 and wanted to install the CyanodenMod 7.1.0, but I keep getting an error every time I try install via Rom manager, Btw this is my first time doing this, I have read lots from sites and forums but just don't get what is going wrong, This is what I do:
- Download ROM Manager
- Click "Flash ClockworkMod Recovery" and it does that successfully
- Click "Download ROM" and select "CyanogenMod" it download fine and then click "Wipe Data and Cache" & "Wipe Dalvik Cache". I have also done the same thing but using the option from SD Card.
- My phone restarts and boots into the standard recovery and give this error:
"--Installing Package...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted."
- Then I just click "reboot system now" since it didn't work and now I am stuck.
I sort of know the problem, it isn't booting into the Clockwork Recovery it's just booting to the standard recovery, but I have no idea how to make it open the Clockwork Recovery, please help or tell me what I am missing.
Thanks for reading.
Don't use Rom Manager, It is not compatible with our phones
You should still be able to enter Download mode
Visit the thread HERE and have a good read and you should be able to get your phone back in working order
Ugh, rom manager. I tend to avoid the apps for doing that kind of thing. I use Odin for Kernels and CWM (Home+Power+Volume Up method) for ROMs. The other ways tend to crash.
How do I do it via CWM? Can you do little step by step guide only rough if possible? Thank you.
Sent from my GT-I9100 using XDA App
Mark719 said:
How do I do it via CWM? Can you do little step by step guide only rough if possible?
Click to expand...
Click to collapse
If only this was already written somewhere, like a FAQ or wiki.
You can boot into recovery mode manually, and choose the zip file from sdcard and flash it straight away. You can also toggle the signature verification there if you get the same error.
1. Download Siyah kernel, open the .zip and copy the zImage file to your SDcard.
2. Install DarkyROM2 app via Android market
3. Choose Flash option in DarkyROM2 tool and select the zImage file copied to SDcard.
Once DarkyROM finishes doing its job you should have ClockWorkMod Recovery installed.
For CM7
1. Download CM7 manually from cyanogenmod.com site
2. Copy the downloaded zip to sdcard
3. Shut of your phone and power it on using volume up+home+power
4. Hold it till you get to a screen with lots of options in orange or blue color thats CWM
5. Do a factory data reset ( Will delete all apps/settings )
5. Select Install zip from sdcard > Choose zip from sdcard > select CM7 zip you copied
say ok.
6. Reboot your device, done .. you should boot into CM7.

Categories

Resources