Database Users

having trouble rooting!

i been rooting phones since i knew how which has been like 3 years! and this epic has been by far the biggest poin in my ass.. i have tried everything in my power ot get it rooted i have read every thread about the one click root and all that but heres my problem ... my phone recognizes my phone when i do not have usb debug on soon as i click it on it puts a up a screen that says need to fine files like me put them manually or windows scans for it .. i have tried everything even going to the drivers and manually updating them and no go !! i have uninstyalling and install tried putting phone back to factory reset ! and still no go .. just keep getting device not found on the run run bat ... please help! i have thread after thread and ive tried it all dont know what to do ..

are you trying to do the one click in recovery?

No I'm doing exactly what is says on page one.. I downloaded the drivers . Then. I put on debug mode then plug in and do the run and it says device not found... am I suppose to do in recovery.. or what.. tried it at my work to and no go
Sent from my SPH-D700 using XDA App

try downloading and installing the android sdk, this fixed this issue for me, just make sure to install the components for android 2.1 etc... PC recognized right away after this:
http://developer.android.com/sdk/index.html

Thanks I will try this !!!
Sent from my SPH-D700 using XDA App

I k ow my computer had probably with certain USB ports don't know if that's your prob but that personally took me a while to figure out and I was pissed like no other
Sent from my SPH-D700 using XDA App

Once you have sdk installed, if you're having trouble connecting your phone to your computer, get "adb wireless" from the market and you can connect that way leaving no need for the usb cable. All you need is your phones wi-fi turned on and a know how of adb.
Sent from my SPH-D700 using XDA App

BThomas22x said:
Once you have sdk installed, if you're having trouble connecting your phone to your computer, get "adb wireless" from the market and you can connect that way leaving no need for the usb cable. All you need is your phones wi-fi turned on and a know how of adb.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
You have to have a router too. A way that both the computer and phone can connect.

Yeah... Thanks
Sent from my SPH-D700 using XDA App

Odin3: keeps saying Removed, Added ..

Hey all,
I am attempting to restore Vibrant back to 2.1 in order to try out Samsung's official 2.2. When I go into Download Mode and plug up to the PC, ODIN detects the phone, but it will randomly give the noise where you unplug something from USB, and ODIN will say removed, then almost immediately say my phone is added again. I'm nervous to try flashing at this point because I don't want that to happen while I'm restoring to 2.1.
I'm running Windows 7 x64. Has anyone had this problem?

Run as admin..

jmcghee1973 said:
Run as admin..
Click to expand...
Click to collapse
The problem still persists after doing this.

Passtschon said:
The problem still persists after doing this.
Click to expand...
Click to collapse
Reboot the pc and try a different usb port then make sure odin is open before you plug the phone into the pc.
Sent from my SGH-T959 using XDA App

MoWeb said:
Reboot the pc and try a different usb port then make sure odin is open before you plug the phone into the pc.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Tried this as well, no different result.
Windows 7 is saying:
USB device not recognized
Device driver was not successfully installed
Unidentified device: (red x) device unplugged
SAMSUNG Mobile Modem: ready to use
I'm currently using Nero v5 with voodoo lagfix disabled

Sounds like you could have something as simple as a bad or fatigued USB port or cable. I've seen this sort of behavior with USB devices before and it's usually from a port connection making poor or intermittent contact. Whether it's a port on your cable (either end), your phone, or the ports on your PC...hard to say...

Passtschon said:
Tried this as well, no different result.
Windows 7 is saying:
USB device not recognized
Device driver was not successfully installed
Unidentified device: (red x) device unplugged
SAMSUNG Mobile Modem: ready to use
I'm currently using Nero v5 with voodoo lagfix disabled
Click to expand...
Click to collapse
Have you tried reinstalling the drivers from Samsung's Vibrant support page?
Sent from my SGH-T959 using XDA App

MoWeb said:
Have you tried reinstalling the drivers from Samsung's Vibrant support page?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yes that was the next thing I did. Same result. Is there an issue with the drivers I'm using because of the ROM I'm running? Do I need different drivers?

Passtschon said:
Yes that was the next thing I did. Same result. Is there an issue with the drivers I'm using because of the ROM I'm running? Do I need different drivers?
Click to expand...
Click to collapse
That ROM should have no effect on the drivers. Have you tried installing the drivers by updating the kies program? You might have to install the drivers and software first.
Sent from my SGH-T959 using XDA App

Yes sir, Kies is up to date as well, and says unrecognized device (obviously lol).
As an aside, as I keep trying and trying, now windows is telling me a usb device has malfunctioned, and windows does not recognize it.

Passtschon said:
Yes sir, Kies is up to date as well, and says unrecognized device (obviously lol).
As an aside, as I keep trying and trying, now windows is telling me a usb device has malfunctioned, and windows does not recognize it.
Click to expand...
Click to collapse
To rule out a problem with windows have you tried a different usb device on the pc?
Sent from my SGH-T959 using XDA App

MoWeb said:
To rule out a problem with windows have you tried a different usb device on the pc?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yes, I just plugged my ipod in and am using it as normal. I am also able to use the phone in mass storage mode as well. The problem only seems to occur when the phone is plugged in during download mode.

I think your driver is corrupt. You should uninstall kies and the usb driver, reboot, and reinstall. Stupid question, have you tried a battery pull on the phone?
Sent from my SGH-T959 using XDA App

MoWeb said:
I think your driver is corrupt. You should uninstall kies and the usb driver, reboot, and reinstall. Stupid question, have you tried a battery pull on the phone?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Ok, I will try that now. I have entered download mode with and without the battery. I will let you know in a few minutes after uninstalling kies and the drivers, and reinstalling the drivers.

Passtschon said:
Yes, I just plugged my ipod in and am using it as normal. I am also able to use the phone in mass storage mode as well. The problem only seems to occur when the phone is plugged in during download mode.
Click to expand...
Click to collapse
When you try odin are you:
1. Opening odin.
2. Selecting the pit and tar files.
3. Putting the phone into download mode.
4. Plugging the phone into the PC.
In that order?
Sent from my SGH-T959 using XDA App

MoWeb said:
When you try odin are you:
1. Opening odin.
2. Selecting the pit and tar files.
3. Putting the phone into download mode.
4. Plugging the phone into the PC.
In that order?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I was opening Odin, putting phone into DL mode, plugging it in, and then messing with the files. When I started the thread this morning it would remove / add constantly, and then it went to not detecting my phone at all and giving me the error message (only in DL mode) once I installed and updated Kies. Reinstalling Samsung drivers now, just rebooted.

Just reinstalled drivers and attempted in the order you provided, and windows is still saying that there was a malfunction with the device.

Can you try a different usb cable?
Kies is still installed right?
Can you use a different pc?
Sent from my SGH-T959 using XDA App

Yes. My sister has the same phone and cable. I'll borrow hers and see if that helps. I appreciate the quick responses, by the way. Thank you very much.
Would the cable only cause it to act up during DL mode and not regular? I can mount normally, etc.
Edit: Odin detects my phone while it's turned on normally. I don't supposed that helps me any.

If there is a bad connection you can have issues.
Sent from my SGH-T959 using XDA App

[Q] Cant get sch-i500 to connect to pc

this is my first time posting and i hope someone can help me and i apologize for the poor grammar and spelling ahead of time. when i plug my phone into my pc it says installing drivers and after a minute or so it says driver installation failed ive have tried the offical drivers from samsung page and from here and have uninstalled rebooted and reinstalled still with no luck. im running windows 7 64bit home premium and windows xp 32bit home nither pick it up ive tried every usb port on both pc's along with clean installation of the os on both. so i can get odin to pick up my phone so i can update my modem from di01 to dl09 and use the new 2.2 rom, does anyone know what i can do or is there a way to update the modem without using odin. thanks for your help

InfamousJester said:
this is my first time posting and i hope someone can help me and i apologize for the poor grammar and spelling ahead of time. when i plug my phone into my pc it says installing drivers and after a minute or so it says driver installation failed ive have tried the offical drivers from samsung page and from here and have uninstalled rebooted and reinstalled still with no luck. im running windows 7 64bit home premium and windows xp 32bit home nither pick it up ive tried every usb port on both pc's along with clean installation of the os on both. so i can get odin to pick up my phone so i can update my modem from di01 to dl09 and use the new 2.2 rom, does anyone know what i can do or is there a way to update the modem without using odin. thanks for your help
Click to expand...
Click to collapse
if youve installed the official drivers go to your settings/ applications/ developmentand make sure usb debugging is checked.. then plug ur phone in.. and pull down the drop bar on the phone.. one of the notifications should say usb connected.. click on it. and it will ask if you want to mount the device to pc.. click yes.. and this will finish the installation of ur drivers.. hope that helps

Tried and still get USB not roconized
Sent from my SCH-I500 using XDA App

InfamousJester said:
Tried and still get USB not roconized
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
where did you dl the drivers?

also turn USB debugging mode ON
and then RESTART the phone.
this only works if the device is recognized as a CD-ROM
also you should be using the drivers from here
http://forum.xda-developers.com/showthread.php?t=779238

I tried drivers from your link and still no go. The weird thing is it picks up my brothers fascinate
Sent from my SCH-I500 using XDA App

if samsung will replace my phone and i flash a stock nandroid img and remove the root do i need to do anything else before sending it back and thank all of you who offered suggestion in trying to get my phone fixed

I was having the same problem after flashing dl30, I fixed it by going to usb settings then choosing ask for connection. After that plug the usb back in and choose mass storage....should work.
Sent from my SCH-I500 using XDA App

I'm stuck on di01 but I will try flashing the dl30 rom tomorrow and try it that way
Sent from my SCH-I500 using XDA App

ajd88 said:
I was having the same problem after flashing dl30, I fixed it by going to usb settings then choosing ask for connection. After that plug the usb back in and choose mass storage....should work.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
This worked for me. With your usb cable disconnected. Tap menu> settings> usb settings> ask on connection. Then plug your usb cable in and select mass storage mode.
Sent from my SCH-I500 using XDA App

Thanks to everyone that tried to help me get past that stupid USB not reconigzed or has malfunctioned error, I guess I'm just gonna buy a new phone since this one still wont pick up
Sent from my SCH-I500 using XDA App

Just wondering, you say your stuck on d101? If you know how to get back to stock and unroot, why don't you do that and then ota to dl09? Maybe the usb thing will straighten itself out once you update.
Sent from my stock 2.1 unrooted, fully bloated Fascinate

I used a nandroid back to stock and z4 to unroot but the update still fails
Sent from my SCH-I500 using XDA App

Confusing Kies

Kies doesn't recognise my phone as it says connecting forever and I don't have download mode or clock work mod recovery!?
Sent from my GT-I9000 using XDA Premium App

Shouldn't this be posted in general? Anyway what are you running (ROM, kernel)? And this mostly happens when don't have your country specific firmware on the phone....
Sent from my GT-I9000 using XDA Premium App

declan8888 said:
Kies doesn't recognise my phone as it says connecting forever and I don't have download mode or clock work mod recovery!?
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Q&A would have been the better section.
I suppose you're on stock? try connecting to another computer via kies. if it works it's a problem with the kies installation/driver try deinstalling everything and installing it again. If no other computer can recognize it and you're on stock yell at somebody working for your provider and send it in.

Kies is pants. It doesn't do anything apart from use every available resource on your PC. Flash a custom rom and forget about it!
Sent from my GT-I9000 using XDA App

theduckking said:
Q&A would have been the better section.
I suppose you're on stock? try connecting to another computer via kies. if it works it's a problem with the kies installation/driver try deinstalling everything and installing it again. If no other computer can recognize it and you're on stock yell at somebody working for your provider and send it in.
Click to expand...
Click to collapse
Do you mean my provider being vodafone or samsung?
Sent from my GT-I9000 using XDA Premium App

If you are running Kies before connecting your phone, try shutting down Kies competely, connect your phone to your computer, wait untill computer recognizes phone(shouldn't take long), then start up Kies.
It's a method that works for me every time.
Regards

Silverdragondk said:
If you are running Kies before connecting your phone, try shutting down Kies competely, connect your phone to your computer, wait untill computer recognizes phone(shouldn't take long), then start up Kies.
It's a method that works for me every time.
Regards
Click to expand...
Click to collapse
Tried - doesn't work it still comes up with 'Connecting' on keys, and 'initializing' on the phone, then finally 'connected' on the phone but its still connecting on kies..

it's always like that when you use the stock rom, if you want to transfer file, set your usb connection setting as mass storage...

declan8888 said:
Tried - doesn't work it still comes up with 'Connecting' on keys, and 'initializing' on the phone, then finally 'connected' on the phone but its still connecting on kies..
Click to expand...
Click to collapse
Run kies as administrator, if this doesnt work open kies and click "tools" and then "install Driver"

The fix is here:
http://forum.xda-developers.com/showthread.php?t=997974

sharptr said:
The fix is here:
http://forum.xda-developers.com/showthread.php?t=997974
Click to expand...
Click to collapse
Didn't work.but thanks
Sent from my GT-I9000 using XDA Premium App

Rogers Galaxy S4 PC Connection Problem

I was trying to transfer some music file to my phone, but my Kies (Win 7 64bit and Win 7 32bit) could not detect my phone I tried to re install the drivers several time without any luck, phone still charging by PC and when ever I uninstall driver from PC and connect my phone PC start installing all the driver and install driver without any error but still my phone doesn't show up in kies or in windows and connected devise.
It would be appreciated if some one guide me to resolve this issue.
Thanks,

clean the registry when you uninstall drivers using ccleaner

polish_pat said:
clean the registry when you uninstall drivers using ccleaner
Click to expand...
Click to collapse
Still no luck, Kies still not showing my phone

I restore stock firmware by ODIN and still my phone does not show up in my PC

Any suggestions?

Bump
Sent from my SGH-I337M using xda app-developers app

nomi640 said:
Bump
Sent from my SGH-I337M using xda app-developers app
Click to expand...
Click to collapse
Do you have android debugging checked?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

I tried both with usb debugging and without but no results
Sent from my SGH-I337M using xda app-developers app

Bump
Sent from my SGH-I337M using xda app-developers app

Any help
Sent from my SGH-I337M using xda app-developers app

nomi640 said:
Any help
Sent from my SGH-I337M using xda app-developers app
Click to expand...
Click to collapse
I've never installed Kies in my life, so I can't comment on it's functionality. nor am I stock...but before I rooted and started flashing, my Rogers S4 was stock.
I used the AT&T drivers to get it to connect in debug or MTP mode. Maybe they will help. You can find them HERE. click downloads or see all downloads and then EXE on the right for the USB Drivers...

still no luck

nomi640 said:
still no luck
Click to expand...
Click to collapse
well I know those drivers work for fact. My Rogers S4 was running VLUAMDJ software...my computer installed some drivers but it didn't work...it never showed up. just like your symptoms. I uninstalled my existing Samsung drivers (which I downloaded when I got my Note 2)...reboot...install those drivers I linked you to, connected phone...detected right away and MTP started working as expected.
so you either have issues with your system (software wise), or it's a faulty cable. I'm going to lean towards the latter first. It's not the first time I've seen that. feel free to try another cable...also if you want...plug your phone in and take a shot of dev mgr and paste it so I can review...or PM me the pic if you prefer....

I thought kies had a troubleshooting mode. Have you tried that? It is referenced I the noob rooting video.

Here is pic for my dev mngr, I tried 3 usb cable, kies troubleshooting but still not showing up, when I plug my phone kies start-up but does phone does not show up in computer or kies.
Thanks for all reply, I can't send phone to Samsung for repair either because I bought from kijiji and Samsung warranty is not transferable

xtechx said:
well I know those drivers work for fact. My Rogers S4 was running VLUAMDJ software...my computer installed some drivers but it didn't work...it never showed up. just like your symptoms. I uninstalled my existing Samsung drivers (which I downloaded when I got my Note 2)...reboot...install those drivers I linked you to, connected phone...detected right away and MTP started working as expected.
so you either have issues with your system (software wise), or it's a faulty cable. I'm going to lean towards the latter first. It's not the first time I've seen that. feel free to try another cable...also if you want...plug your phone in and take a shot of dev mgr and paste it so I can review...or PM me the pic if you prefer....
Click to expand...
Click to collapse
Any idea?

nomi640 said:
Any idea?
Click to expand...
Click to collapse
sorry forgot about the thread, my apologies. I haven't been using tapatalk as much recently, and that's where I used to check my participated threads.
I don't have those devices under ports if I have usb debugging on or off...weird. I'm on win8 x64...the only thing I didn't expand was Portable devices...I only have the two references in my dev mgr....
can you try uninstalling all the detected devices in dev mgr, and delete the driver from the system when doing so? then disconnect the phone, reboot, install those at&t drivers, then plug the phone in and test?
I want to recommend removing Kies before all of that, but not sure if you used it in the past, where it store the backed up data, etc..if you've never used it then please do uninstall Kies before what I mention above...
let me know.

Tried everything but no luck
Sent from my SGH-I337M using xda app-developers app

nomi640 said:
Tried everything but no luck
Sent from my SGH-I337M using xda app-developers app
Click to expand...
Click to collapse
I've installed those drivers on 3 different windows 7 systems this week and not one has failed to recognize MTP on the device first try...I even soft bricked my device a couple days ago, odin'ed back to VLUAMDJ stock, installed drivers on a win8 system that had never had an Android device plugged into it and wasn't connected to the internet (just installed those at&t drivers from a usb drive)...guess what...worked again..
It shouldn't work so easily for soo many people then not at all for you. I'm baffled at how easily it works for me even, and I've been trying to make it not work. I"m a technician I enjoy trying to break things to see if I can duplicate an issue, and fix it....and I can't duplicate your issue.
either something to with your USB port(s), or drivers (either mobo chipset or usb), or windows installation. if you have usb that are controller by a chipset like Intel then other USB that are another chipset, try on the other "bank" so to speak...you'd have ot know how to look for that if you had it though...or try it on someone elses computer with those at&t drivers. don't connect the phone until you install the drivers.
if it's not usb port(s), drivers, or the windows installation you either have 3 bad micro USB or you have a faulty USB port on your phone. or pocket lint preventing a proper connection (although I've assumed you've looked for that already)...those are the only things left.

Still no luck
Sent from my SGH-I337M using xda app-developers app