Database Users

Stuck on mytouch sceen reboot loop help

So i tried to flash a rom like a normally do and i get stuck on the green screen.
I noticed now when flashing a rom is takes alot longer to flash then it usually did , i wiped pulled battery multiple times and still the same results. If i try to flash a froyo rom it will stay on the mytouch screen for a few secs and reboot to recovery mode on its own. every other rom just gets stuck and will not move. im limited to only recovery mode and Fastboot , are their any simple fixes that can be done and thanks in advance.

fabolous02000 said:
So i tried to flash a rom like a normally do and i get stuck on the green screen.
I noticed now when flashing a rom is takes alot longer to flash then it usually did , i wiped pulled battery multiple times and still the same results. If i try to flash a froyo rom it will stay on the mytouch screen for a few secs and reboot to recovery mode on its own. every other rom just gets stuck and will not move. im limited to only recovery mode and Fastboot , are their any simple fixes that can be done and thanks in advance.
Click to expand...
Click to collapse
Have you tried fixing apk uids? I've also heard you can use the bootloader to do a more thorough wipe.
If I were in your situation I would apply sappimg to unroot and start over.

Phateless said:
Have you tried fixing apk uids? I've also heard you can use the bootloader to do a more thorough wipe.
If I were in your situation I would apply sappimg to unroot and start over.
Click to expand...
Click to collapse
im fairly new so i only know how to flash roms . outside of that im pretty much clueless. I tried flashing a new radio & when it tells me to reboot to complete installation it says no more room or somthing like that. it does it really quick so i cant tell. Also how would i go about unrooting?
EDIT .. ok unrooted the phone and it seemed to have done the trick.

fabolous02000 said:
im fairly new so i only know how to flash roms . outside of that im pretty much clueless. I tried flashing a new radio & when it tells me to reboot to complete installation it says no more room or somthing like that. it does it really quick so i cant tell. Also how would i go about unrooting?
EDIT .. ok unrooted the phone and it seemed to have done the trick.
Click to expand...
Click to collapse
Glad you're still operational. Now you can retrace your steps and figure out where you went wrong. I also had to unroot and go back to Cupcake before I successfully completed my first rooting.
If you're just flashing ROMs, I would stay away from updating the radio unless the developer specifically says you should.

Clockwork Recovery won't load

I cannot get clockwork recovery to load. I've tried the latest one (2.5.x.x) and a few older ones. I'm on an at&t dell streak, and used androot to root.
I have a lot of experience with my Captivate, I'm comfortable with adb shell commands etc. This just doesn't make a whole lot of sense to me.
I have loaded the 2.5.x.x version of CW via fastboot, but when I boot into recovery, and select option 2, it hangs on a black screen. I've done quite a bit of searching, but I haven't found an answer.
I've also tried the alternate CW that is supposed to help with this issue. Could I have flashed a bad version of CW, and that file is still giving me problems?

When 2.5.0.1 didn't work for me, 1.8.something did. Just try different ones until you get it..
Good luck
Sent from my Dell Streak using XDA App

Well, I tried to load another CW, and now the phone won't boot to UI. I get stuck on the Dell loading screen.

lionheartck said:
Well, I tried to load another CW, and now the phone won't boot to UI. I get stuck on the Dell loading screen.
Click to expand...
Click to collapse
If you are running 1.6 use ClockWorkMod 1.8.1.7 (i think that is the right number) if you are on 2.1+ then CWM 2.5.0.1 is good to go.

I will try the earlier clockwork tonight. I'm sure if I get that working, I can flash another ROM and be back in business. I was freaking out when I couldn't get the phone past the DELL screen, and CW wasn't working.

I read around some more and didn't realize that I needed to flash a stock recovery, and get on an 02 rom in order to get to 2.1 and then to 2.2. Problem solved though, thanks for all your help guys, I'm flashing to 2.1 right now!

DELL STREAK need help!!

Hi everyone,
I was running dj_steve 1.8.0 unlocked tmobile us
and I decided to format my sd card and flashed 1.8.1 now it is just boot looping
I do have the install file inplace with options. Just to make a long story short now when i'm in the streak recovery it cannot find my sdcard? Wth? I try searching for this and i can't seem to find the answer. I also tried to get the streak back to stock condition using fastboot and when i go to recovery pick the 2nd option on the phone it just goes black,,,man I really need help here,,,I assume i need to get the streak back to stock right? and if so what am i doing wrong to have the black screen when i'm fastbooting?

im just guessing but try the QDL tool!

that fixed it!! thank you so much for making this happen!!
I been pulling my hair out almost bald,,lol

your welcome glad i could help!

[CM7] DJ_Steve has gotten it to boot on the Adam!

DEV ROM THREAD: http://forum.xda-developers.com/showthread.php?t=1025180
REF: http://forum.xda-developers.com/showthread.php?t=1002000
REF: http://forum.xda-developers.com/showthread.php?p=12673838
DJ_Steve has gotten this far!
Initial Boot;
http://twitpic.com/4hntp2
http://twitpic.com/4hntrk
Subsequent work results;
http://twitpic.com/4hol6l
http://twitpic.com/4holbh
http://twitpic.com/4holdm

Awesome.
10 char

I'm not able to view the images, but AWESOME!

Freakin hellz yea!

and the beta is now up in the android dev forum

Is there a way for me to test this on my adam! Can some one please point me in the right direction!

Go have a loosie in the android dev forum
Sent from my Dell Streak using Tapatalk

i had done that!
I just had to give it more time to boot!

Problem when modding
Hi, I have managed to get my Adam to start but it is stuck on "Cynogenmod7" screen and just keeps running the start up animation and doesnt do anything else. The screen goes blank after a while and the only way to recover is to reboot the device which gets stuck in the same place again. Can someone please help?
Thanks

nbhuta said:
Hi, I have managed to get my Adam to start but it is stuck on "Cynogenmod7" screen and just keeps running the start up animation and doesnt do anything else. The screen goes blank after a while and the only way to recover is to reboot the device which gets stuck in the same place again. Can someone please help?
Thanks
Click to expand...
Click to collapse
If you haven't already be sure to clear system data+cache in the recovery menu.. That usually solves boot loop issues..

mrhatfi said:
If you haven't already be sure to clear system data+cache in the recovery menu.. That usually solves boot loop issues..
Click to expand...
Click to collapse
Thanks mate that helped.....but still not able to boot into Cynogenmod7 it has started on alternate mod i.e. Beast.....at least it is working now.

[Q] Stuck on LG logo

I recently purchased a lg g2, the korean variant f320s, it was running kitkat with a lot of bloatware on top. I successfully rooted the phone and after that i found a cwm recovery installer for this version of the phone and i hooked up the phone and ran the installer on my pc, it finished installing and the phone rebooted into the custom recovery which was in chinese i went into a menu option and then pressed the back button on the screen and the phone instantly rebooted and got stuck at lg boot logo. Is there anyway to fix this? i have tried wiping cache, dalvik and factory reset from the recovery that i can access(chinese or something) but to no avail. I can access the download mode but my pc does'nt recognize the phone and this step is crucial for i guess installing the stock rom through lg flash tools. The phone however is recognized when im in recovery and i plug it in but it only shows as a drive that is faded out and entering it shows nothing. please help me i just got it two days ago

Have you tried to use adb to sideload a rom?

playerone_ said:
Have you tried to use adb to sideload a rom?
Click to expand...
Click to collapse
i'm sorry im a complete noob in this regard could you explain a bit on how to go about doing that? i am downloading the stock kitkat rom for the model its in kdz format

.
I flashed cloudy flex rom on it through external sd in recovery and now when i boot it up it stays on lg logo for a while then screen goes black and botts up again directly into CWM recovery, please help someone...

Same problem
sheroy1995 said:
I recently purchased a lg g2, the korean variant f320s, it was running kitkat with a lot of bloatware on top. I successfully rooted the phone and after that i found a cwm recovery installer for this version of the phone and i hooked up the phone and ran the installer on my pc, it finished installing and the phone rebooted into the custom recovery which was in chinese i went into a menu option and then pressed the back button on the screen and the phone instantly rebooted and got stuck at lg boot logo. Is there anyway to fix this? i have tried wiping cache, dalvik and factory reset from the recovery that i can access(chinese or something) but to no avail. I can access the download mode but my pc does'nt recognize the phone and this step is crucial for i guess installing the stock rom through lg flash tools. The phone however is recognized when im in recovery and i plug it in but it only shows as a drive that is faded out and entering it shows nothing. please help me i just got it two days ago
Click to expand...
Click to collapse
EXACT same problem as you... Every detail is exactly the same.
I am trying to find a solution. Any luck?

.
naleyb01 said:
EXACT same problem as you... Every detail is exactly the same.
I am trying to find a solution. Any luck?
Click to expand...
Click to collapse
Yeah you just need to flash a different rom through the sd card i tried cloudy rom but it didnt work then a i tried Lamhoang rom and it did the trick im on jellybean now though and i'll try flashing something else in a month or so

ALL FIXED
You are a legend!! Device back up and running.
Okay so I installed that same rom you did but the home/back/menu buttons weren't working so not wanting to muck around, I did some quick searching (which I should have done before >.<) and worked out how to get the Cloudy roms working on a korean device.
You need "Philz cloudy f320 recovery", the kitkat baseband and the rom. LINK
1 - Install the new recovery from zip and then boot back into recovery after this. You will now be greeted with philz recovery which is awesome.
2 - From here, proceed to install the rom as noted on the rom page.
This process worked for me for the Cloudy G3 V1.3 rom.
Thanks a lot for your help!! happy to return the favour! But i am hoping the above info already does that. :victory:

naleyb01 said:
You are a legend!! Device back up and running.
Okay so I installed that same rom you did but the home/back/menu buttons weren't working so not wanting to muck around, I did some quick searching (which I should have done before >.<) and worked out how to get the Cloudy roms working on a korean device.
You need "Philz cloudy f320 recovery",
1 - Install the new recovery from zip and then boot back into recovery after this. You will now be greeted with philz recovery which is awesome.
2 - From here, proceed to install the rom as noted on the rom page.
This process worked for me for the Cloudy G3 V1.3 rom.
Thanks a lot for your help!! happy to return the favour! But i am hoping the above info already does that. :victory:
Click to expand...
Click to collapse
Good to know you got it working again i still cant figure out why this problem occurred in the first place why did the phone brick from the recovery when the recovery was working fiblne after? Also i can just get the new recovery over the one already on the phone without removing the previous one right? Thanks for the info im gonna try out the cloudy roms soon

I have no idea.. something to do with that chinese recovery I am guessing.. There are still a few issues I am going to address but for now my phone is 95% working.
The only issue is that if I try go into download mode, it still doesn't go to the second screen (All i get is the small blue dots). Bit of a pain because that's something nice to fall back on if you ever need to.
I'll search around and try and figure these out in the next week or two, but I am happy with what I have for the moment.
Yep, you literally install the new recovery over your current one and then you can restart phone back into your rom and then reboot back into recovery using an app or the button method.

naleyb01 said:
I have no idea.. something to do with that chinese recovery I am guessing.. There are still a few issues I am going to address but for now my phone is 95% working.
The only issue is that if I try go into download mode, it still doesn't go to the second screen (All i get is the small blue dots). Bit of a pain because that's something nice to fall back on if you ever need to.
I'll search around and try and figure these out in the next week or two, but I am happy with what I have for the moment.
Yep, you literally install the new recovery over your current one and then you can restart phone back into your rom and then reboot back into recovery using an app or the button method.
Click to expand...
Click to collapse
Yeah i have the same issue with the download mode as well and the phone cant seem to sync properly with the lg mobile support tool either.Do let me know if you figure something out