So i tried to flash a rom like a normally do and i get stuck on the green screen.
I noticed now when flashing a rom is takes alot longer to flash then it usually did , i wiped pulled battery multiple times and still the same results. If i try to flash a froyo rom it will stay on the mytouch screen for a few secs and reboot to recovery mode on its own. every other rom just gets stuck and will not move. im limited to only recovery mode and Fastboot , are their any simple fixes that can be done and thanks in advance.
fabolous02000 said:
So i tried to flash a rom like a normally do and i get stuck on the green screen.
I noticed now when flashing a rom is takes alot longer to flash then it usually did , i wiped pulled battery multiple times and still the same results. If i try to flash a froyo rom it will stay on the mytouch screen for a few secs and reboot to recovery mode on its own. every other rom just gets stuck and will not move. im limited to only recovery mode and Fastboot , are their any simple fixes that can be done and thanks in advance.
Click to expand...
Click to collapse
Have you tried fixing apk uids? I've also heard you can use the bootloader to do a more thorough wipe.
If I were in your situation I would apply sappimg to unroot and start over.
Phateless said:
Have you tried fixing apk uids? I've also heard you can use the bootloader to do a more thorough wipe.
If I were in your situation I would apply sappimg to unroot and start over.
Click to expand...
Click to collapse
im fairly new so i only know how to flash roms . outside of that im pretty much clueless. I tried flashing a new radio & when it tells me to reboot to complete installation it says no more room or somthing like that. it does it really quick so i cant tell. Also how would i go about unrooting?
EDIT .. ok unrooted the phone and it seemed to have done the trick.
fabolous02000 said:
im fairly new so i only know how to flash roms . outside of that im pretty much clueless. I tried flashing a new radio & when it tells me to reboot to complete installation it says no more room or somthing like that. it does it really quick so i cant tell. Also how would i go about unrooting?
EDIT .. ok unrooted the phone and it seemed to have done the trick.
Click to expand...
Click to collapse
Glad you're still operational. Now you can retrace your steps and figure out where you went wrong. I also had to unroot and go back to Cupcake before I successfully completed my first rooting.
If you're just flashing ROMs, I would stay away from updating the radio unless the developer specifically says you should.
Related
If this is in the wrong area please mods answer and redirect it into the correct area.
I was wondering if your phone is looped at the first bootloader screen and you cannot access recovery or bootloader is there a way to unbrick your device using a code in the adb?
Please answer...... and move if nessasary.
Thank You
I had been running Cyanogen 3.5.2 and then switched to JACHero 2.2 to see the changes. Then when I tried to switch back to Cyanogen and I kept getting the bootloop. No matter what I did, wipe, flash, wipe again, flash again. Nothing. I assume it might have something to do with the Apps2SD setup but I have no idea. I just reflashed back to JACHero and it is working fine.
chuckhriczko said:
I had been running Cyanogen 3.5.2 and then switched to JACHero 2.2 to see the changes. Then when I tried to switch back to Cyanogen and I kept getting the bootloop. No matter what I did, wipe, flash, wipe again, flash again. Nothing. I assume it might have something to do with the Apps2SD setup but I have no idea. I just reflashed back to JACHero and it is working fine.
Click to expand...
Click to collapse
Did you reflash using the ABD. If you did not then you would have to use the recovery or bootloader mode on the device. Therefore not using the abd commands at all. Im not bashing you or anything btw.
about cyan to jachero same happened to me... it has somthing to do with apps2sd your correct. somthing like the .odex files from hero saving on ur sd partion and ruining the whole setup on cyans. so what i did was use paragon partion manager to completely reformat my sd card and then remade my ext3 partion on it. and it works fine. im never switching off of cyans rom thoe. anymore to much of a headache and stuff.
(as you can tell im drunk and i really dont understand all this rom lingo lol bare with me i hope i helped you?)
nickryan0612 said:
If this is in the wrong area please mods answer and redirect it into the correct area.
I was wondering if your phone is looped at the first bootloader screen and you cannot access recovery or bootloader is there a way to unbrick your device using a code in the adb?
Please answer...... and move if nessasary.
Thank You
Click to expand...
Click to collapse
There are other posts on this but if you can't get into recovery or bootloader you are toast adb may not connect(really it should connect to adb when on the boot screen but many have been through this and haven't been able to get their phones working. I bet you tried flashing the Haykuro SPL("Danger" SPL) right?
It is brick you will have to look into a replacement/exchange if possible.
savethechicken said:
There are other posts on this but if you can't get into recovery or bootloader you are toast adb may not connect(really it should connect to adb when on the boot screen but many have been through this and haven't been able to get their phones working. I bet you tried flashing the Haykuro SPL("Danger" SPL) right?
It is brick you will have to look into a replacement/exchange if possible.
Click to expand...
Click to collapse
Oh no was just wondering cause i am thinking about rooting my phone but under the right direction. Not the posts they have here cause they are to hard to follow. If you or someone could help me i only wanna upgrade to a hero that has flash player and can put notifications out like this one : http://4.bp.blogspot.com/_Q-JSg53A3...AFD4/6TWLdeIi3VY/s400/rosie7-lock-screen2.jpg
I also had bootloop when switching back from jachero to Dude's 1.3. I had to pull the battery out to get it to shut down, but then I was able to use recovery to flash Dude's... how is it that you're unable to get into recovery mode? Have you tried pulling ythe battery?
ohnoezmahfone said:
I also had bootloop when switching back from jachero to Dude's 1.3. I had to pull the battery out to get it to shut down, but then I was able to use recovery to flash Dude's... how is it that you're unable to get into recovery mode? Have you tried pulling ythe battery?
Click to expand...
Click to collapse
If you mess up the SPL you can't get into recovery. The only known method of messing up the SPL is with the "Hero" SPL (afaik, without manually trying to brick your phone).
If you get a bootloop, make sure you wiped AND completely cleared your ext2/ext3 partition with apps2sd. That always seems to cause a bootloop.
I have flashed the new CyanogenMod and the Cyanogen Recovery 1.4 and when I wipe everything and flash, it'll load up and I can use the phone 100% perfectly, but once I reboot my phone, or turn it off and on, it never goes past the green boot screen. Anyone have any solutions/reasons why it does that? It's with every single Cyanogen mod too, i've tried several of them.
Probably because you have a lot of apps?
If not, reflash it.
tmc_adio07 said:
I have flashed the new CyanogenMod and the Cyanogen Recovery 1.4 and when I wipe everything and flash, it'll load up and I can use the phone 100% perfectly, but once I reboot my phone, or turn it off and on, it never goes past the green boot screen. Anyone have any solutions/reasons why it does that? It's with every single Cyanogen mod too, i've tried several of them.
Click to expand...
Click to collapse
what do you actually flash and what is the actual process, you shouldnt have any issues after it boots up the first time, wipe everything and make an exterior partition meaning get rid of your cyanogen recovery 1.4 and get amon ra's latest... look in the dev section and read up on cyan's page on how to flash the rom
mt3g said:
what do you actually flash and what is the actual process, you shouldnt have any issues after it boots up the first time, wipe everything and make an exterior partition meaning get rid of your cyanogen recovery 1.4 and get amon ra's latest... look in the dev section and read up on cyan's page on how to flash the rom
Click to expand...
Click to collapse
Thanks for help man, right now I'm running dwang's rom 100% perfect w/ no issues at all. it can reboot and everything just fine. I'm just a little worried on going back and trying to flash cyanogens.
When I installed it, I first did the root process, downloading the .apk file and going through all that part smooth, then I downloaded and flashed the Cyanogen Recovery 1.4, and from there I downloaded the two files (DRC83_base and the latest cyan's rom, i forgot the version #) and applied update from SD, first doing DRC83 and right after doing the rom itself, without rebooting the phone. It loads up A-OK and I can installl the apps and go about my business, but once I need to restart my phone, it just never turns back on. I'm puzzled completely...I even did the whole unroot and reroot thing and STILL i'm not having any luck.
K I got confused in there some where did you flash a cyan rom at all in there I read that you flashed the drc83 zip file but sounds like you just flashed that and booted the phone lol... never tried that but.... any way it seems like you are doing everything correct onlything I could suggest is make sure you have the correct htc base image, and make sure you wipe and repair everything!!!!! and also try a differant download of cyanogen as you might have gotten a bad one or something I have never had any issues with a cyanogen rom except maybe a FC back on 4.0xx or something
兄弟，估计你刷成砖了。同情ing。。
I unlocked the bootloader, then I flashed the recovery image and everything was alright. When I tried to flash CyanogenMod 5.0 it aborted halfway, and when I went to reboot all that I am getting is the start up image and that's it.
I tried factory reset, wiping the memory through the recovery image and nothing is happening.
If anybody has any ideas, please share.
bricked.=p
If your getting into the Recovery, it sounds pretty impossible you bricked it. Even dieing half way through Cyan's Rom shouldnt be a major issue. I think i read that dieing during a radio update can cause problems(or SPL), but a rom shouldnt
Try this again...
1) Boot into Recovery. Bootloader - > Recovery
2) Wipe the phone
3) Flash Cyan's Rom
4) Restart
5) If it works, re-boot into the recovery and make a NandBackup....
can you boot into bootloader? if so theres no way youre bricked.
I can't flash anything, it keeps coming up installation aborted.
BIG BREAKTHROUGH!!
I was finally able to install Cyan and now it says installation complete.
Now what?
Thanks for the help guys, I reloaded Cyan's mod for the tenth time and it finally installed and it works like a dream.
The only problem is I don't have the 3G on my top bar, just an H. What does that mean?
H is a good thing. Just showing you are on the fastest network. Glad to hear you are working now
Sean-
I really appreciate the help, I was ready to just give up. Thanks again buddy.
If you're ever on xbox live hit me up with a friend request- UnderCvrLover
Search function is down but I did go through a few pages of threads looking for what was going on and no luck but I apologize if this has been solved somewhere else.
First off I would rate my rooting know-how as beginner to intermediate. I've jailbroken/unlocked multiple iPhones awhile back and have rooted/flashed roms on a cliq, mts, my3g, and this mt4g before.
I recently returned my current mt4g back to stock rom and unrooted. I do not think I turned s back on but I should have double checked before.
I currently have root and flashed clockwork and am trying to flash CM7 (I had ran it before on this phone as well). I have an issue right now where I cannot get into clockwork recovery as it will just sit at the mytouch logo forever and if I try and volume up and power into recovery all I get is 3 vibrations and a flashing amber light.
I can boot into the stock (but rooted) rom.
Any ideas? I feel like my recovery is broken or something but this goes beyond what I know. Any help would be great and any information you need I'll be happy to provide.
myTouch 4G, rooted, s (probably) off, stock rom, clockwork says i'm on 3.0.2.4
After reading that, I'm not fully convinced you actually have root and S-OFF. If you're sure you do, download ROM Manager from the Market and use that to install a fresh copy of CWM recovery. Also make sure the "fast boot" option is turned off somewhere under Settings. At that point, there should be nothing preventing you from getting into recovery if you have perm root.
I've got ROM Manager and it has SU permissions and I have the latest recovery flashed but I am still stuck on mytouch logo or the 3 vibrations/amber light when I try to get to recovery. If I reboot there is still no problem getting SU in terminal emulator or ROM manager or anything.
Fast boot is off as well. Thanks for the help so far.
Any ideas?
I don't often boot into recovery manually since most custom ROMs have an enhanced reboot menu with a recovery option, but if memory serves, I believe the key press combination is actually Power + Volume Down, not up like you mentioned in your OP. Give that a try.
Man I am really crazy. Here I am a tmo rep and also a novice modder and I'm hitting power + volume up.
Worked like a charm.. Now just to figure out why clockwork is sitting at the mytouch screen when trying to install CM7.
Thanks for the fresh set of eyes!
breakaway87 said:
Worked like a charm.. Now just to figure out why clockwork is sitting at the mytouch screen when trying to install CM7.
Click to expand...
Click to collapse
After flashing CM7, the phone hangs at the myTouch screen when attempting the first boot?
From ROM Manager if I try to flash CM7 from there it goes to the mytouch screen and hangs before anything else happens.
breakaway87 said:
From ROM Manager if I try to flash CM7 from there it goes to the mytouch screen and hangs before anything else happens.
Click to expand...
Click to collapse
What if you select the "boot into recovery" option in ROM Manager? Does the phone reboot into CWM recovery? (you should see the main CWM menu in orange text)
Boot into recovery takes me to MT4G logo and hangs.
breakaway87 said:
Boot into recovery takes me to MT4G logo and hangs.
Click to expand...
Click to collapse
So you don't have a good installation of CWM. Open ROM Manager again and re-flash a fresh recovery. I think there's an option to wipe your existing recovery beforehand, so if you see that, select it. You need to get a working recovery image before you can do much else.
Deleted current recovery and I confirm my model again and it takes a total of 5 seconds. Trying to reboot into recovery again after and I still hang at MT4G.
I hate it when you know something you need to do but you've been working on it so long you can't come up with new ideas.
Thanks again for the help.
Sorry multipost since it didn't register on my computer the first time for some reason
Yeah sorry man, I've never heard of a situation where CWM stubbornly refuses to install. If you have the engineering bootloader, you could manually flash it that way, but that's my only other idea.
Alright well thanks for all the help man, I'll dig around and pick up tomorrow.
I ended up looking for the recovery myself on the SD card and deleted it and then it flashed no problem. Thanks again for the help
breakaway87 said:
I ended up looking for the recovery myself on the SD card and deleted it and then it flashed no problem. Thanks again for the help
Click to expand...
Click to collapse
Sure, glad you figured it out.
I was rooting my device and was successful l in that. I flashed TWRP and Magisk and after that I decided to install a custom ROM. While going for it I again wiped the - Delvik Cache, System, Data and Cache. And when I tried installing that ROM it doesn't gets install. Moreover I can't boot into System anymore and now I'm stucked at the screen saying "Your device has been unlocked and can't be trusted." Also the screen is showing "ID:N/A"
So please please please help me with this problem ASAP. I can't use my phone now please and I regret for what I've done.
Try booting into fastboot mode. Hold down volume down and power for several seconds. If you can get there, you can flash the stock ROM and hopefully get back to normal. There are other threads that show you how to install. Make sure you use a version that is greater than or equal to what you last had installed.
NZedPred said:
Try booting into fastboot mode. Hold down volume down and power for several seconds. If you can get there, you can flash the stock ROM and hopefully get back to normal. There are other threads that show you how to install. Make sure you use a version that is greater than or equal to what you last had installed.
Click to expand...
Click to collapse
So this means my Stock ROM is gone? and I've to install it again? Can u explain me what my problem is?
engtika said:
So this means my Stock ROM is gone? and I've to install it again? Can u explain me what my problem is?
Click to expand...
Click to collapse
When you installed a custom ROM your stock ROM was gone. That's how it works. But the reason you're stuck at the screen you're at, I don't know.
Restoring back to stock is the first thing I'd try to see if you can actually use your phone
NZedPred said:
When you installed a custom ROM your stock ROM was gone. That's how it works. But the reason you're stuck at the screen you're at, I don't know.
Restoring back to stock is the first thing I'd try to see if you can actually use your phone
Click to expand...
Click to collapse
Thanks for the information you provided regarding my problem. Now I've installed the Stock ROM and my dead phone is back to life. ?