Hi,
i download the last version from SamsungFirmware (P1000XXJK5 ##), odi 1.31 and the pti. in the pdf from samsungfirmware is standing first part is to flash the pti with repartition and in the secound part, there is to select PDA, PHONE and CSC. But in the firmware is only one tar file for the PDA.
What firmware is a complete one with the correct CSC and PHONE files?
i think the problem was the repartiton, on the youtube video, there will be done without repartition and only flash the PDA part.
kind regards
Obviously you only flashed a partial ROM (PDA component only), but by repartioning you wiped out your existing CSC and MODEM components.
As I understand, you can only flash a partial ROM over an existing one with the same PIT. However, since you have effectively reformatted, you now need to flash a full ROM again, and then flash your partial ROM over the top.
An example of a complete ROM would be JJ4 as it includes MODEM, PDA, and CSC components.
I suggest that you start again with this ROM, or another that contains all 3 components and uses the correct PIT for your "final" ROM. You should then be able to flash you intend ROM over the top of it (PDA only, no repartitioning).
Regards,
Dave
Thanks Foxmeister,
i have downloaded the most roms and JJ4 is allready in the process. the big problem is, that samsungfirmware.com not write, what rom is full and what's only a PDA Partition Rom.
edit: now it works, i have make the full flash with the MODEM and CSC Files from JJ4 and the new PDA directly, this works too, without problems and after searching i could switch the language too, the JK5 has any kind of cyrilic as default.
kind regards
ju
Related
i am asking this question bcoz i have flashed the official froyo for asia dxjpa
and the flashing way via odin was different cozz pit file 513 is used for flashing it.
so i wanted to know the right flashing way for ddjp6 froyo .. via odin
i downloaded the firmware ddjp6.. and it contains only one .tar file
so i just wanted to know the perfect flashing method
please dont advise me to do it through kies...
thanx
You can flash DDJP6 via odin the same way you flashed DXJPA without using any .pit file and it will work. As I have also flashed the other asian versions without using any .pit file (no .pit file recommended for firmwares with only one file on sam firmwares).
So How does the pit file affect anything ? I flashed DDJP6 with the .803 pit file. I take it that shouldn't be an issue ? Also, is the boot Galaxy "S" animation from the pit file ? I don't like the one I got from the asian froyo with the disjoint s... Does the Indian froyo have that too, or the one from eclair ?
Prasad007 said:
So How does the pit file affect anything ? I flashed DDJP6 with the .803 pit file. I take it that shouldn't be an issue ? Also, is the boot Galaxy "S" animation from the pit file ? I don't like the one I got from the asian froyo with the disjoint s... Does the Indian froyo have that too, or the one from eclair ?
Click to expand...
Click to collapse
Not sure about what exactly .pit file does but had a problem installing DXJPA earlier with .803pit (failed to flash) then tried with .513 and worked well.
haven't noticed the boot animation.
Did u move from 2.1 or unofficial 2.2?
i have a question..
if there is one tar file, should i put the file in just pda or PDA,PHONE AND CSc and then flash?
PDA for single tar file
jje
Check my signature if you want PDA MODEM & CSC seperately for DDJP6.
You can also try to use XXJPY PDA, JP6 MOEDEM & CSC.
JJEgan said:
PDA for single tar file
jje
Click to expand...
Click to collapse
I clarification after flashing with Odin will all the setting & data reset to factory.
Or will all the personal data, Games, applications will remain.
One more thing if the Re-Partation in Unchecked (Not selected). Will the Odin keep my data as it is on the phone or it will reset to factory settings.
ragin said:
Check my signature if you want PDA MODEM & CSC seperately for DDJP6.
You can also try to use XXJPY PDA, JP6 MOEDEM & CSC.
Click to expand...
Click to collapse
Do you have the original PDA for XXJPY, the one you posted was with some change, I need the original JPY PDA file, Please give me the link
thanks..
so if i Root in the current jp6 im running, and it was updated by KIES, can i flash without removing the root by using ODIN?
And also i need to know possible best options to flash official firmwares.
i tried to put up a new gingerbeard theme on my i5801[india] but did something wrong and now my phone is stuck at boot screen....
i am a noob and need help in reflashing my phone....
i had 2.1 stock and now i am thinking of flashing with 2.2 or other rom??[suggestions needed]
i read that you need to factory reset before flashing??
links needed for complete guide to falshing for noob
and also links for the 2.2 rom for i5801??
pls help guys!!!
[email protected] said:
i tried to put up a new gingerbeard theme on my i5801[india] but did something wrong and now my phone is stuck at boot screen....
i am a noob and need help in reflashing my phone....
i had 2.1 stock and now i am thinking of flashing with 2.2 or other rom??[suggestions needed]
i read that you need to factory reset before flashing??
links needed for complete guide to falshing for noob
and also links for the 2.2 rom for i5801??
pls help guys!!!
Click to expand...
Click to collapse
just flash the stock 2.1 or 2.2 using odin ..
Don't panic !
You can get the most stable 2.2 firmware xxjpm as well as the flashing steps from here..
www.forum.xda-developers.com/showthread.php?t=778880
You can try flashing a custom rom as well..just browse the development section..
Rapier07 said:
Don't panic !
You can get the most stable 2.2 firmware xxjpm as well as the flashing steps from here..
www.forum.xda-developers.com/showthread.php?t=778880
You can try flashing a custom rom as well..just browse the development section..
Click to expand...
Click to collapse
whats the difference between jpm jpf etc....
which rom should i go for???[no bugs at all]
well XXJPM is latest firmware than XXJPF
I5801ZFJPE ##
I5801ZHJPF ##
these two are available at samfirmware,which one should i get??
and which rom is best and stable??
Download I5800XXJPM
remove boot.bin and sbl.bin (edit using winrar)
then select as one package and flash
i need a credible source about jpm...iam not sure its not even in i5801 section...
We flash 5800 firmware all the time, just be sure to check for the above mentioned boot files.
i cant wait for days,i need to do something today....so going for jpm
any precautions while flashing ??
it's not in 5801 b=coz it's a 5800 rom
both are same phone (there is no difference that i know) if u goto any phone specification websites, u'll not find any difference
5801 was first created for orange-europe similar to locked blackberry and i-phones of airtel and vodaphone
then they changed the whole production stream to I5801(changed stickers and boot screen only difference)
should sd card be inserted while flashing??
the first time it starts up after flashing it's gonna take a long time
DO NOT REMOVE DATA CABLE ON ANY CONDITION DURING FLASHING
if the boot logo (the samsung screen) stays for more than 15 min, remove battery, close&restart odin, goto download mode and flash again
be sure to remove the two files-(if they are not present then no problem)
that's not a problem but let it remain inside (custom rom using data2sd & app2sd must have sd card access during flashing)
My rom suggestion:
http://forum.xda-developers.com/showthread.php?t=986831
It also contains instructions on how to flash. You can use the instructions to flash JPM too (if you dont want a custom rom), just use the JPM onepackage file instead of the indroid.
Recommended JPM download:
http://www.filesonic.com/file/183636761/JPM.tar
or
http://www.fileserve.com/file/KJFSBBq/JPM.tar
After flashing I'd suggest enabling JIT (dunno if it works with JPM, pretty sure it does. It definitely works with indroid)
http://forum.xda-developers.com/showpost.php?p=12736421&postcount=2
You could also try out the fugumod BE kernel (with overclock), however it might not be stable so its up to you:
http://forum.xda-developers.com/showthread.php?t=997367
stubborn_d0nkey said:
My rom suggestion:
http://forum.xda-developers.com/showthread.php?t=986831
It also contains instructions on how to flash. You can use the instructions to flash JPM too (if you dont want a custom rom), just use the JPM onepackage file instead of the indroid.
Recommended JPM download:
http://www.filesonic.com/file/183636761/JPM.tar
or
http://www.fileserve.com/file/KJFSBBq/JPM.tar
After flashing I'd suggest enabling JIT (dunno if it works with JPM, pretty sure it does. It definitely works with indroid)
http://forum.xda-developers.com/showpost.php?p=12736421&postcount=2
You could also try out the fugumod BE kernel (with overclock), however it might not be stable so its up to you:
http://forum.xda-developers.com/showthread.php?t=997367
Click to expand...
Click to collapse
i already downloaded jpm [115 mb] from samfirmware but not yet started the flashing process...
edit:figured it out its 243 mb after extracting
where are these files and how to remove them "boot.bin and sbl.bin"
i can only see
1,cache.rfs
2,datafs.rfs
3,factoryfs.rfs
4,modem[bin file]
5,zimage
In what format did it come in? Odin accepts .tar and .tar.md5 files
1.If its a one package (one tar) first check if it (the tar file) contains boot.bin and sbl.bin, if so REMOVE THEM. If something goes wrong while flashing them it can "brick" your phone (make it unusable and unfixable by you)
To flash click on the link i posted above and follow flashing instructions on post 4 (or post 3/5 not sure which post it is)
2.If it comes in several packages (phone csc pda bootloader) flash phone csc and pda with odin, DO NOT FLASH BOOTLOADER, same reason as above for boot and sbl.
Flashing like this is quite similar to flashing a one package (instructions- first link of previous post). The difference is you dont tick/check one package in odin and you dont choose a onepacke file, but you choose phone, csc and pda to there respective places then flash
3.It might (but shouldn't) also come as a bunch of files, factory.rfs data.rfs etc, (if there are boot.bin and sbl.bin, REMOVE THEM)if so you have to .tar them. Google for a program that can make .tar files (like 7zip).
After making the .tar file flash as it by following the instructions in the link in my previous post (its a one package flash)
EDIT: just saw your post. those two files (boot and sbl) have already been removed. If the files you do have didnt come in a .tar use method 3 in this post, if they did come in a tar use method 1
stubborn_d0nkey said:
In what format did it come in? Odin accepts .tar and .tar.md5 files
1.If its a one package (one tar) first check if it (the tar file) contains boot.bin and sbl.bin, if so REMOVE THEM. If something goes wrong while flashing them it can "brick" your phone (make it unusable and unfixable by you)
To flash click on the link i posted above and follow flashing instructions on post 4 (or post 3/5 not sure which post it is)
2.If it comes in several packages (phone csc pda bootloader) flash phone csc and pda with odin, DO NOT FLASH BOOTLOADER, same reason as above for boot and sbl.
Flashing like this is quite similar to flashing a one package (instructions- first link of previous post). The difference is you dont tick/check one package in odin and you dont choose a onepacke file, but you choose phone, csc and pda to there respective places then flash
3.It might (but shouldn't) also come as a bunch of files, factory.rfs data.rfs etc, if so you have to .tar them. Google for a program that can make .tar files (like 7zip).
After making the .tar file flash as it by following the instructions in the link in my previous post (its a one package flash)
EDIT: just saw your post. those two files (boot and sbl) have already been removed. If the files you do have didnt come in a .tar use method 3 in this post, if they did come in a tar use method 1
Click to expand...
Click to collapse
i have jpm tar file [243 mb]
flash using these instructions:
rudolf895 said:
Procedure on how to install this rom:-
YOUTUBE VIDEO ON HOW TO INSTALL CLICK HERE​
Fire up odin (ODIN>http://goo.gl/nCxCw)
Select the ops (OPS FILE>http://goo.gl/ORin0)
Then Make sure to check one package
Click on one package
Select the .tar file from the pop up window
Turn off your phone
Go to download mode(here is how>http://goo.gl/byK8G)
Connect your phone to pc via USB
Hit START!
Finally after the process is complete you will get to your home screen!
Enjoy!
Click to expand...
Click to collapse
Can someone help me with the terms used on the forum. I still have no post found.
Odin is a flash program where different files to be loaded. I have now flashed several times but I always do something what is told me. I would like to understand what I do. Can anyone explain?
What is the PIT file and what should I use?
Which version should I use of ODIN?
What do these files:
PDA
PHONE
CSC
Normally you have a device whit one kind of firmware. Why so many?
Thank you for your help
Daywalkers said:
Can someone help me with the terms used on the forum. I still have no post found.
Odin is a flash program where different files to be loaded. I have now flashed several times but I always do something what is told me. I would like to understand what I do. Can anyone explain?
What is the PIT file and what should I use? NEVER UNLESS INSTRUCTED TO DO SO . PIT is partition information table .
Which version should I use of ODIN?
Latest but i still use an old one .
What do these files:
PDA Phones firmware Kernel and OS and apps.
PHONE modem
CSC country specific settings networks languages etc .
A full firmware including modem and CSC is usually flashed via PDA .
Normally you have a device whit one kind of firmware. Why so many?
Flash modem only flash CSC only are the extra uses and some full firmwares are actually in the three parts so you would load all three .
jje
Click to expand...
Click to collapse
.pit file
.PIT file is used for full flashing method, this is only advisable and useful for reverting back to original firmware when previously installed unofficial ROM or to fix softbricked devices like unable to boot normally.
Hi,
i am trying to fix software on my note3 but i have problems finding the right files.
There is Bootloader, PDA, CSC and Baseband but i don't know how to upgrade it to the correct versions.
For example i found Version OK9 here: http://forum.xda-developers.com/galaxy-note-3/general/direct-download-bootloaders-modems-t3258803
But there is no file to update PDA, CSC and Baseband?
I installed the KERNEL file and it changed the Kernel. Did not try RECOVERY yet because i think it could overwrite the Custom Recovery TWRP that is installed now.
In older post i also found some "CP" files for OJ6 and OK6 and they installed new version for PDA but i can not find them for OK9?
Can anybody please explain the different files and how to find the right versions?
I downloaded two files to update bootloader and PDA to OK6 but i can only update the Bootloader but PDA Version does not change.
CP_N9005_OK6.tar.md5
BL_N9005_OK6.tar.md5
The first file is supposed to update the PDA or not?
CP is modem/baseband and it does not update PDA. AP is PDA. You can find complete firmwares from http://www.sammobile.com/. These packages contains all parts together and you can find installation instructions for example from https://www.youtube.com/watch?v=DdDgaqsYrRs.
kuitsu said:
CP is modem/baseband and it does not update PDA. AP is PDA. You can find complete firmwares from http://www.sammobile.com/. These packages contains all parts together and you can find installation instructions for example from https://www.youtube.com/watch?v=DdDgaqsYrRs.
Click to expand...
Click to collapse
Ah i see, thx for your help!
Hm so maybe it could be a good idea to install a untouched Stock Rom first and then go to modified image?
I have now installed N9005XXUGBOK6_N9005DBTGBOI1_DBT Stock Image with Odin.
When i want to go back to this image: http://forum.xda-developers.com/galaxy-note-3/development/rom-lp-tw-rom-t3027148 is it enought to just install it or do i need to wipe anything before?
I don't want all the samsung adware...
Oh it even killed the philz touch recovery...
kuitsu said:
CP is modem/baseband and it does not update PDA. AP is PDA. You can find complete firmwares from http://www.sammobile.com/. These packages contains all parts together and you can find installation instructions for example from https://www.youtube.com/watch?v=DdDgaqsYrRs.
Click to expand...
Click to collapse
how to flash only this PDA/AP & Bootloader via odin?
BL ver : A515FXXU3BTI2
AP Ver : A515FXXU3BTI2
Neither of those are for Note 3 based upon what you have posted .
BL in bl section AP in ap section on Odin .
I am extremely new at this but if I want to update my firmware to, let's say, Germany firmware (PD1), will i need to keep CSC or PDA in mind? Or can I just flash the Germany firmware without those?
What are CSC, PDA, and baseband?
Sent from my SM-G935F using Tapatalk
you have to take care of different partition layout sizes, with the new odin packages this should be no problem, if you only flash the pda (or AP) part.
otherwise you will fail at the flash procedure mainly with hidden.img and/or cache.img!
in any case: flashing your "stock" rom for your region or carrier will fix things if anything gets messed up!
another thing to consider: try flashfire from chainfire, its a new an advanced tool for flashing firmware files!