Link to the modem.bin (flash with odin in phone slot):
http://www.multiupload.com/GP746J649D
Baseband version: I9000UGJK3
Original thread for the leaked firmware: http://forum.xda-developers.com/showthread.php?t=845558
Just flashed it onto my captivate and 850 band is working and everything seems alright so far but I can't go driving around to make sure it stays working good when it switches towers. I know some people have been waiting for the bell froyo leak so I thought I'd post this. Been using it for about an hour and battery hasn't drained a bit from what it was on when I flashed it. Seems better then JPP already
Also, I was already on an i9000 rom with JPP modem and had 850band enabled already so I'm not sure if this modem has it enabled by default or not but I think it does.
will it work fine in 1900 areas?
drummer07 said:
will it work fine in 1900 areas?
Click to expand...
Click to collapse
the mhz basebands the i9000M Bell uses... is the EXACT same thing as ATT's.. so all radio functions should work
so far so good.
850 confirmed and working
Sent from my SAMSUNG-GT-I9000 using XDA App
CWM update zip
Repackaged for CWM flash.
Has anybody tried this on a non i9000 kernal? I'm running cog
jhnstn00 said:
Repackaged for CWM flash. Haven't tried modem or zip yet.
Click to expand...
Click to collapse
Just tried to install through cwm and it aborted
Warjcowski said:
Has anybody tried this on a non i9000 kernal? I'm running cog
Click to expand...
Click to collapse
99% chance it wont work but if you want to be a Guinea pig by all means
Don't forget to check for voice + data
The reason is I'm pretty sure Bell uses i9000
Sent from my SAMSUNG-SGH-I897 using XDA App
sicmadek said:
Just tried to install through cwm and it aborted
Click to expand...
Click to collapse
can't test our fix right now. Have a birthday party to go to. Maybe someone else can fix.
Sent from my SAMSUNG-SGH-I897
Flashed successfully through cwm and data works, but voice is static.
sicmadek said:
Just tried to install through cwm and it aborted
Click to expand...
Click to collapse
Move downloaded zip to /sdcard and try again. worked for me too.
Warjcowski said:
Flashed successfully through cwm and data works, but voice is static.
Click to expand...
Click to collapse
On Cog or on an i9000 rom?
I tested it by calling a few people on Doc's i9000 rom and everyone said I sounded good and clear.
bts0uth said:
On Cog or on an i9000 rom?
I tested it by calling a few people on Doc's i9000 rom and everyone said I sounded good and clear.
Click to expand...
Click to collapse
On cog and his default kernal. O well, phone calls are annoying anyway
Warjcowski said:
Warjcowski said:
Flashed successfully through cwm and data works, but voice is static.
Click to expand...
Click to collapse
On cog and his default kernal. O well, phone calls are annoying anyway
Click to expand...
Click to collapse
I guess for the minimal effort it took to try that configuration, it was worth trying. But it is well known that using a Captivate ROM/kernel (which Cog is based on) with an I9000 modem results in unusable, echoey, staticky unusable voice.
Albert Einstein said:
Insanity: doing the same thing over and over again and expecting different results.
Click to expand...
Click to collapse
but we can't use i9000 kernel too - buttons are freaky...
Warjcowski said:
On cog and his default kernal. O well, phone calls are annoying anyway
Click to expand...
Click to collapse
Just because it's CM, don't forget your basic kernel/rom issues among different devices.
What I mean is, as always, i897 kernels only work well for voice AND data with i897 modems.
Warjcowski said:
Flashed successfully through cwm and data works, but voice is static.
Click to expand...
Click to collapse
Let me know if you need help putting the Cog modem back
Sent from my SAMSUNG-SGH-I897 using XDA App
Yuna said:
but we can't use i9000 kernel too - buttons are freaky...
Click to expand...
Click to collapse
There's i9000 kernels that work flawlessly on the Captivate.
Sent from my Captivate
Yuna said:
but we can't use i9000 kernel too - buttons are freaky...
Click to expand...
Click to collapse
The reorientated kernel and Setiron's kernel are both i9000 based. So those two kernels will work.
Related
Hi
You know maybe already some of my work even if this is my first post in the captivate forums.
Let me introduce you the stock+Voodoo stable kernels.
Those are built injecting Voodoo lagfix inside an original Samsung kernel built specifically for Captivate.
It comes with extensions like "su" and also ClockWorkMod recovery as default recovery.
Voodoo lagfix converts /system, /cache, /dbdata and /data to Ext4 with optimized parameters for speed but also guaranteeing data integrity.
Also, it configures the write behavior of Linux to prevent lag from happening, plus apply some memory management providing a better balance than stock settings.
Designgears help a lot during the development of this new stable release, testing endlessly new experimental code I was writing Thanks!
What it's not: voodoo sound, voodoo sharpness. Those improvements needs kernels built from sources.
Froyo only versions for now, I'll build Eclair version later.
update.zip you can flash with ClockWorkMod recovery (not 2e or 3e)
UCJJ4+Voodoo http://dl.project-voodoo.org/stock+...k+Voodoo-Froyo-I897-UCJJ4-unsigned-update.zip
UCKB1+Voodoo http://dl.project-voodoo.org/stock+...k+Voodoo-Froyo-I897-UCKB1-unsigned-update.zip
.tar you can flash with Odin
UCJJ4+Voodoo http://dl.project-voodoo.org/stock+Voodoo/tarballs/stock+Voodoo-Froyo-I897-UCJJ4.tar
UCKB1+Voodoo http://dl.project-voodoo.org/stock+Voodoo/tarballs/stock+Voodoo-Froyo-I897-UCKB1.tar
Thanks to slm4996 who was the first to test this kernels
Nice work! Testing now. Does this include the sound and color fixes?
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Working great. Flashed over perception build 8 with ljl3 modem
slm4996 said:
Working great. Flashed over perception build 8 with ljl3 modem
Click to expand...
Click to collapse
Hehe thanks for the report - I updated the first post.
slm4996 said:
Working great. Flashed over perception build 8 with ljl3 modem
Click to expand...
Click to collapse
Do voice calls work? This is Captivate kernel, thats a telus modem for Vibrant...
Sent from my GT-I9000 using Tapatalk
Great to see CWM integrated
Sent from my GT-I9000 using Tapatalk
Voice calls do not, I was reporting on the kernel functionality.
I'm switching back the radio now.
slm4996 said:
Voice calls do not, I was reporting on the kernel functionality.
I'm switching back the radio now.
Click to expand...
Click to collapse
Ah, OK
Sent from my GT-I9000 using Tapatalk
slm4996 said:
Voice calls do not, I was reporting on the kernel functionality.
I'm switching back the radio now.
Click to expand...
Click to collapse
Voice calls absolutely do work. You clearly had some other issues.
Sent from my brain using Thumbs 2.0.
icezar1 said:
Do voice calls work? This is Captivate kernel, thats a telus modem for Vibrant...
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Well, this is a Captivate modem, designed to work with Captivate more than Frankenstein phones
I did the same for Vibrant kernels if you prefer: http://forum.xda-developers.com/showthread.php?t=870480
The main target for these kernel are users using "standard" ROM, as most user do, with a kernel they can trust.
Guys, decide
Sent from my GT-I9000 using Tapatalk
let me se if i get it this is to be used with stock ROMS only? or i can be used with custom roms like perception, cognition & axura??
Cog and Auxura would probably be ok. I haven't tried it yet though. The "stock" he is referring to, I think, is Captivate based Froyo Roms (ji6, jj4).
do it work with JPU roms like Darky 5.2?
Does not work in axura
is not working with axura 2.2 i have no audio in phone call i can't heard nothing
just in case it matters i have JL3 modem with axura 2.2 any suggestions?
i used the odin version and flash it in pda section of odin is that the correct way to do it?
JEANRIVERA said:
is not working with axura 2.2 i have no audio in phone call i can't heard nothing
just in case it matters i have JL3 modem with axura 2.2 any suggestions?
i used the odin version and flash it in pda section of odin is that the correct way to do it?
Click to expand...
Click to collapse
That is the correct way to flash the kernel. Have you tried reflashing the modem?
majinzen said:
That is the correct way to flash the kernel. Have you tried reflashing the modem?
Click to expand...
Click to collapse
just tried that waiting for boot i will let you know!!!
not working going back to sentirons 1.4.5 sorry!!!!!!!!!!
isn't axura based on vibrant jk2.. -___-;..
this kernel is FOR STOCK FROYO FOR CAPTIVATE.
darkamikaze said:
isn't axura based on vibrant jk2.. -___-;..
this kernel is FOR STOCK FROYO FOR CAPTIVATE.
Click to expand...
Click to collapse
im just trying same kernel but for vibrant in my cappy with axura i let you kn ow if it worked!
it worked BUT the volume buttons at least in CWM are inverted up=down down=up power button working fine for ok
no i only need where to change the soft buttons to match the cappy ones i have them inverted back=home home=back vol up=down down=up and had to turn off the autorotation any suggestions?
I have converted several modems into CWM 3 compatible zips.
check them out at:
http://www.4shared.com/account/dir/QumxbFdV/_online.html
There are 2 pages, make sure you check both
Thanks to devz3r0 for the information he compiled. For more info about modems refer to his thread at
http://forum.xda-developers.com/showthread.php?t=876391
Special thanks to nubecoder for the amend2edify program http://forum.xda-developers.com/showthread.php?t=903598
NOTE: THESE DO NOT WORK WITH MIUI AND CM7 ROMS
EDIT: devz3r0 has updated his thread to include the CWM3 compatible modems, I will not be updating it anymore.
reserved___
Another one
Thanks!!
Thanks Singal! Someone needs to put that in a more prominent location.
confused... flashed jvk on cm7 successfuly, but i reboot and goto settings about and still says baseband is jk4???
Awesome! I agree this thread needs to be more well-known.
slayp00n said:
confused... flashed jvk on cm7 successfuly, but i reboot and goto settings about and still says baseband is jk4???
Click to expand...
Click to collapse
Samsung roms and CM roms use different methods to write the modem, these zips won't work on CM. Just pull the modem.bin out of one of these (or any other zip) and drop it in a CM modem zip.
TheEscapist said:
Samsung roms and CM roms use different methods to write the modem, these zips won't work on CM. Just pull the modem.bin out of one of these (or any other zip) and drop it in a CM modem zip.
Click to expand...
Click to collapse
Cool. Where can we find CM7 modem zips for samsung?
bikinibottom100 said:
Cool. Where can we find CM7 modem zips for samsung?
Click to expand...
Click to collapse
Just grab any of the modem zips of the CM sourceforge.
TheEscapist said:
Samsung roms and CM roms use different methods to write the modem, these zips won't work on CM. Just pull the modem.bin out of one of these (or any other zip) and drop it in a CM modem zip.
Click to expand...
Click to collapse
this def did not work, i dropped the jvk modem.bin into tthe jk4 zip and i just bootlooped.. had to reflash jk4
what modem is the best for puerto Rico im running gr-11 right now / when i was on miui i was rocking the jl3 but duno if i an flash it in this rom
slayp00n said:
this def did not work, i dropped the jvk modem.bin into tthe jk4 zip and i just bootlooped.. had to reflash jk4
Click to expand...
Click to collapse
Post the zip + modem here, I'll take a look at it.
wibi795 said:
what modem is the best for puerto Rico im running gr-11 right now / when i was on miui i was rocking the jl3 but duno if i an flash it in this rom
Click to expand...
Click to collapse
Try out different modems nobody can tell you which modem is best for you, JK4/JVK works pretty well for me.
You can flash JL3 on this ROM.
Flashed a new modem on Captivate running Miui, no problem and looks good. Still not sure what modem is best suited for my location, but thats my problem!
-Spoke too soon, flashed the modem but the settings did not reflect the change.
Yes that happens on CM and miui, I don't think these modems are compatible with those two os.
These are only for samsung based ROMs
Hey all I live in central pa and am looking for the best modem for signal strength not 3g regular signal there is no 3g in my area so I just want signal strength and call quality. Im on gingerbread with talon kernel jp9 seems to be the best ive found so far. Any suggestions? Thanks
Sent from my GT-I9000 using XDA Premium App
Need to post that THESE DO NOT WORK WITH MIUI AND CM7 ROMS.
oxlong27 said:
Hey all I live in central pa and am looking for the best modem for signal strength not 3g regular signal there is no 3g in my area so I just want signal strength and call quality. Im on gingerbread with talon kernel jp9 seems to be the best ive found so far. Any suggestions? Thanks
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Check out the sticky in the forum, has a lot more info.
Which sticky?
Sent from the miui matrix SGH-i897
Hey, im running a KB5 rom and im if there's a way to port TouchWiz 4 to it.
All the GB roms around here, ported or not, run by default with the KB5 modem. You just can't port a modem on any phone
No im running a rom with a KB5 modem and im wondering if its possible to get the Touchwiz 4 launcher.
dcaples002 said:
No im running a rom with a KB5 modem and im wondering if its possible to get the Touchwiz 4 launcher.
Click to expand...
Click to collapse
You're using the word modem without knowjng what it means or how you're using it.
Modem: the control software for your cell data/reception.
ROM: the rest of the software that controls your phone.
Here is what you're actually asking:
I'm running modem kb5 and I'm asking of something that has nothing to do with modem builds can be ported to a modem.
Click to expand...
Click to collapse
Here is an interpretation of what you're trying to say:
Hey, I'm running a kb5 rom and I'm wondering if there is a way to port the touchwiz 4 launcher to it.
Click to expand...
Click to collapse
Do you see the big difference between the two?
Also, this is not meant to be rude, it's meant to help guide in asking your questions in the proper format for a proper response.
Sent from my SGH-T959 using XDA App
geoffcorey said:
You're using the word modem without knowjng what it means or how you're using it.
Modem: the control software for your cell data/reception.
ROM: the rest of the software that controls your phone.
Here is what you're actually asking:
Here is an interpretation of what you're trying to say:
Do you see the big difference between the two?
Also, this is not meant to be rude, it's meant to help guide in asking your questions in the proper format for a proper response.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Lol my bad I kind of knew I wasn't wording that quite right. I already knew your modem controls your cell reception which is the reason im using KB5 because its what works best in my area but what does JVB mean because I've tried flashing the TouchWiz 4 JVB on my phone and it started bootlooping. (I thought JVB was a type of modem so thats why I asked if there was a TouchWiz 4 for KB5).
BTW I just hit your thanks button for correcting me
dcaples002 said:
Lol my bad I kind of knew I wasn't wording that quite right. I already knew your modem controls your cell reception which is the reason im using KB5 because its what works best in my area but what does JVB mean because I've tried flashing the TouchWiz 4 JVB on my phone and it started bootlooping. (I thought JVB was a type of modem so thats why I asked if there was a TouchWiz 4 for KB5).
BTW I just hit your thanks button for correcting me
Click to expand...
Click to collapse
KB5 is Android OS 2.2 "Froyo". JVB is Android OS 2.3 "Gingerbread". Two different animals. Its like windows vista and windows 7. Im sure someone will port TW4 to Froyo at some point.
Something new to distract me from Asgard... thanks.
Noooooo don't port it without me! I wanna learn too so can you teach me?!?!? It would be greatly appreciated! Im really trying to learn how to port this!
The Fascinate guys got it on froyo.
http://forum.xda-developers.com/showthread.php?t=1052156&highlight=touchwiz+4
So I don't see why it shouldn't be possible.
Posted - http://forum.xda-developers.com/showthread.php?p=13637673#post13637673
Im planing on upgrading my galaxy s to jvr when it comes out tomorrow id like to know is there way of rooting jvr,will cf-root jvq work on jvr?
Flash speedmodkernel and give root via CMW
Read the posts, JVR is out already.
I'm on JVQ now and I'd like to flash JVR. I want to make backup and I need root. I read about CF-root and BT issues... Where can I get root only solution, I don't need any modified kernels etc.
BARMAN2005 said:
I'm on JVQ now and I'd like to flash JVR. I want to make backup and I need root. I read about CF-root and BT issues... Where can I get root only solution, I don't need any modified kernels etc.
Click to expand...
Click to collapse
flashed jvr and tried to root it with fuguroot twice but it did´nt worked.
francomile said:
flashed jvr and tried to root it with fuguroot twice but it did´nt worked.
Click to expand...
Click to collapse
After reading through thread today, it seems that fuguroot does not work so well with 2.3.4..... I would be suprised if there was any change with this new release.
Rooted with CF-Root-XX_OXA_JVP-v3.7-CWM3RFS and currently restoring my apps. Seems a lot faster in the restoration than JVQ.
woolf clubs said:
After reading through thread today, it seems that fuguroot does not work so well with 2.3.4..... I would be suprised if there was any change with this new release.
Click to expand...
Click to collapse
Browser has changed, much faster and when you pinch in it apears the opened pages in small.tHE rom is fast. here´s some pics i took:
olivercervera said:
Flash speedmodkernel and give root via CMW
Click to expand...
Click to collapse
I tried to root in CWM with Speedmod Kernel K15h-t24 but it didn't work...
But this worked :
5nakedoc said:
Rooted with CF-Root-XX_OXA_JVP-v3.7-CWM3RFS and currently restoring my apps. Seems a lot faster in the restoration than JVQ.
Click to expand...
Click to collapse
francomile said:
Browser has changed, much faster and when you pinch in it apears the opened pages in small.tHE rom is fast. here´s some pics i took:
Click to expand...
Click to collapse
Cheers dude, i was talking about fuguroot though....
woolf clubs said:
Cheers dude, i was talking about fuguroot though....
Click to expand...
Click to collapse
Yes i know, i was making a general opinion post, sorry for replying to your post
Enviado desde mi GT-I9000 usando Tapatalk
Just flash semaphore kernel 1.4.0
Disclaimer: I am not responsible for loss, damages or any other kind of issue that can arise from installing this ROM.
Features:
Completely Stock
Deodexed, Zipaligned
Rooted
APN config from Apex
Home haptic feedback added with proper key mapping for captivate
Ad blocking using hosts file
DC 4.0 JVS kernel
XXJVS modem
Init.d scripts from Apex
SQLite3
Download Link: http://www.mediafire.com/?174rtk07thn9eni
You need to be on GB bootloaders before flashing this.
Credits:
Faryaab for stock base - Awesome --> He deserves the credit for this, so thank him before thanking me
MikeyMike01 for home haptic fix for I9000 ROMs - The best
Samsung for leaking build after build after build -
I may have to leave Pinnacle for a little test.
Is it to early to ask about the battery (joking)
Will it get me to leave miui? Please, not another kh 3 bomb?
Sent from the frozen tundra known as Canada.
tkjeeper said:
Will it get me to leave miui? Please, not another kh 3 bomb?
Sent from the frozen tundra known as Canada.
Click to expand...
Click to collapse
Kh3? Its stock XXJVS.
Too Fast Too SERIOUS 6: Watsa's Legend
watsa said:
Disclaimer: I am not responsible for loss, damages or any other kind of issue that can arise from installing this ROM.
Features:
Completely Stock
Deodexed, Zipaligned
Rooted
APN config from Apex
Home haptic feedback added with proper key mapping for captivate
Ad blocking using hosts file
DC 4.0 JVS kernel
XXJVS modem
Init.d scripts from Apex
SQLite3
Download Link: Uploading....
You need to be on GB bootloaders before flashing this.
Credits:
Faryaab for stock base - Awesome
MikeyMike01 for home haptic fix for I9000 ROMs - The best
Samsung for leaking build after build after build -
Click to expand...
Click to collapse
Watsa, you're a beast!
Sent from my SAMSUNG-SGH-I897 using XDA App
What are the major differences between JVR and JVS?
I can just flash this over JVQ Continuum 6.2.1 correct? Nothing special as long as I'm on GB bootloaders right. Also.... is the reverse true for going back to a 2.3.4 ROM if soemthing should arise with instability? Just covering my ass in case of a bad flash or something.
Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
watsa said:
Samsung for leaking build after build after build -
Click to expand...
Click to collapse
They should leak before build just once is enough
baghera1979 said:
I can just flash this over JVQ Continuum 6.2.1 correct? Nothing special as long as I'm on GB bootloaders right. Also.... is the reverse true for going back to a 2.3.4 ROM if soemthing should arise with instability? Just covering my ass in case of a bad flash or something.
Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Yes thats why this is CWM flashable, and since it has DC kernel u dont lose CWM to go back to you rom of choice
watsa said:
Yes thats why this is CWM flashable, and since it has DC kernel u dont lose CWM to go back to you rom of choice
Click to expand...
Click to collapse
Thank you much. Gonna give it a try
Sent from my SAMSUNG-SGH-I897 using XDA App
thank you! Downloading and give a try!
Am I understanding correctly? J is i9000 and K is i897?
getinlost said:
Am I understanding correctly? J is i9000 and K is i897?
Click to expand...
Click to collapse
Correct. As usual captivate builds are a version behind I9000. When we get KH3 2.3.4 I9000 gets JVS 2.3.5
Hopefully this means were gonna see Apex with a JVS base.
Also is there any changelog that mentions changes between JVR and JVS.
Also I've heard the JVS modem has 850 enabled out of the box is this true?
watsa said:
Correct. As usual captivate builds are a version behind I9000. When we get KH3 2.3.4 I9000 gets JVS 2.3.5
Click to expand...
Click to collapse
If that is the case why the need for GB loaders vs. i9000?
I am only curious. have a i897.
getinlost said:
If that is the case why the need for GB loaders vs. i9000?
I am only curious. have a i897.
Click to expand...
Click to collapse
I said GB bootloaders. you can have either of I9000 GB or captivate GB bootloaders
I think i have to buy a couple of capy´s to follow Watsa dev´s that way i can keep all the rom´s
Nice work !!!
watsa said:
I said GB bootloaders. you can have either of I9000 GB or captivate GB bootloaders
Click to expand...
Click to collapse
Ouch. I will come back to this when sober. ;-)
Thanks for educating a noob.
Watsa,
you now im noob on this things
What´s the diferencen between this rom and Apex ?