Hidden menu settings reset to defaults - Fascinate General

Where is the hidden menu data stored and can it be reset?
I'm trying to reset the hidden menu settings back to defaults, as I seem to have lost the ability to connect to data at 1X (vs 3G), but have no idea how to go about it. Any ideas?
Sent from my SCH-I500

You Tube
Was just looking on You Tube at vids. on the hidden menus go there didnt save link as I am gone from there now but its not hard to find.

http://www.youtube.com/watch?v=QGsHu5xOolc
Here, hope this is what you wanted.

I know how to access them. My issue is when I did access them I lost my data connection, 3g and 1x. I need a way to reset the hidden menu settings to default.
I tried a cwm restore to an earlier point to no avail. This is really bad.
Anyone?
Sent from my SCH-I500

lowkee said:
I know how to access them. My issue is when I did access them I lost my data connection, 3g and 1x. I need a way to reset the hidden menu settings to default.
I tried a cwm restore to an earlier point to no avail. This is really bad.
Anyone?
Sent from my SCH-I500
Click to expand...
Click to collapse
Its hidden for a reason. DONT MESS WITH IT, it can break your phone. plus, this should be in the General subforum, not development.
The one way that you might be able to fix it is by flashing the new leak DJ05 i think it is, with the modem and all that. Hidden Menu changes stuff in the radio i believe, so without flashing a stock radio for the fascinate you may not get it fixed.

Odin back to factory

For those reading this thread because you have also lost data connectivity, I have solved my issue.
By a recommendation from the IRC channel, I activated a different phone (any phone will do, even a dumb phone), waited a while (I waited a day, just to be safe, but I don't think any delay is needed), then reactivated my Fascinate again. Once I rebooted after activation, the data was all back to normal again. No issues.
Hope this helps someone avoid the stress I went through.

@lowkee:
Your settings sound like a missing dmu.key or 10.key files. Back when I would flash v3ms to Alltel firmware and reprovision them to Verizon, you absolutely needed to make sure these two files were put back else your data would not work at all.

Related

[Q] No more 1X data after playing in the hidden menus

I was playing around with this and, beyond changing the GPS settings and the navigation volume, I didn't change anything, just browsing.
Well, my phone rebooted a few times while in the ##DATA# section, even though nothing changed (that I am aware of), and now my phone no longer has 1X data, so my data goes away unless I have 3G.
Does anyone know what I may have changed that broke this? I haven't touched any settings in the main phone, as it happened while I was looking around in the secret menus.
Is there a way to restore all of the settings to default if all else fails? I tried doing the *228 option 1 programming, but to no avail. Still no 1X data.
-------------------
UPDATE: For those reading this thread because you have also lost data connectivity, I have solved my issue.
By a recommendation from the IRC channel, I activated a different phone (any phone will do, even a dumb phone), waited a while (I waited a day, just to be safe, but I don't think any delay is needed), then reactivated my Fascinate again. Once I rebooted after activation, the data was all back to normal again. No issues.
Keep in mind, you MUST do a new activation, not simply a *228 opt 1 while the phone is currently activated, as this does not seem to reactivate the data. It must be a new device activation (coming from a different device)
Hope this helps someone avoid the stress I went through.
Bump because this sucks.
Need help from devs!
+1 bump!
This is a serious issue as a result of people releasing the "secret codes" with no explanation of what each menu option does.
I, too, am experiencing intermittent data connectivity as a result of tinkering where I shouldn't have been. The OP and I are not holding anyone liable, but just asking for expert help to get our phones back in original working order. I really don't want to call Verizon, risking this becoming an insurance claim which requires a $150 deductable. I could drop Big Red and get an Epic or Evo with that money (contract is up in a couple weeks).
My problem is that the data connection seems to be going into an on-demand state, but when that demand is present, the connection will drop. If I wake the phone (press the power button to turn on the display and unlock), a 3G connection is present. However, if I try to start browsing the web, for example, the connection will drop completely within 1-2 minutes.
I've tried changing the "Set preferred network type" option (found in *#4636*1111# > Phone Information) to every logical option - WCDMA Preferred, CDMA auto (PRL), CDMA only, EvDO only, etc - to no avail. Looking at this menu right now, the preferred network is set to "Unknown". When I toggle the radio on/off from this screen, the "GSM disconnects" active log takes a few minutes to connect, and I see packet traffic. But, again, when I attempt to use that data connection, it will drop completely in short time. I've done everything I can think of, short of a full Odin restore.
Surely XDA has some cellular experts here - maybe even Verizon network techs - that know how to fix this.
i disagree with your first line. this is a n issua as a result of people who dont know what they are doing. not because it was leaked. if you dont know how to mess with your phones. dont. and if u do and screw up, dont blame anyone but yourself
Thanks for the not helpful reply. Argue in your own thread. I need help, not a finger pointing lecture.
Unless you know what caused my issue, you are just as ignorant as I am. The difference being I didn't climb on a soapbox about it.
Sent from my SCH-I500
lowkee said:
Thanks for the not helpful reply. Argue in your own thread. I need help, not a finger pointing lecture.
Unless you know what caused my issue, you are just as ignorant as I am. The difference being I didn't climb on a soapbox about it.
Sent from my SCH-I500
Click to expand...
Click to collapse
I'm in the same boat, lowkee. I'm just frustrated because I've posted this issue in 2 different forums and no one tries to help.
Just like you, I only changed the GPS Startup Mode to "cold" and looked around at other things - I touched nothing else. Last time I checked the GPS setting, it was back to "hot".
My intent was not to start a flame war or hijack your post. I was only trying to explain what I troubleshooting I've done in hopes that it may help you and, more importantly, get a response from someone who knows this topic front to back.
The response I got is the reason why my post count is only 2 (now). These days you can't go into any forum without risking backlash or flaming.
Back to the topic at hand - does anyone have any helpful suggestions for the OP? I'm just going to do a stock Odin restore and read up.
Let me know if that ODIN restore (and which part of it) fixes the issue. I have a suspicion it won't, and if it doesn't, I'm really worried.
Wiping is not an issue; I don't want to have to wipe for no benefit, though. Thanks for being the test subject
Ok. So I actually had to use the "force close loop" restoration method, including manual voodoo removal even though it should have been removed before - I never reapplied it. Data is staying up... nope, just dropped again. I'm really starting to hate this phone.
Here we go again... baseband version is the DI01 update, but build number is DH12. Removing root and going to try OTA update, IF data will stay connected long enough...
That DInc in my desk drawer is starting to look better every day. It's even one of the first batches that had the (AM?)OLED screens AND it has Froyo!
I hate to start typing this, but I believe I've fixed my issue. Here's what I've done so far (in order):
Removed Voodoo lagfix manually.
Wiped System via stock recovery.
Wiped system/cache/Dalvik cache via Clockwork Recovery.
Flashed stock system partition via Odin w/ PIT loaded.
Flashed stock kernel via Odin w/ PIT loaded.
Followed steps from the post "How to Escape the Force Close Loop of Hell" on AndroidCentral forums (sorry, can't post links yet).
Once fresh ROM loaded, installed CWM, fixed permissions & reboot.
Loaded the latest JT stable kernel.
Installed latest JT CleanROM.
And, of course, while I was typing this post, it dropped data connection when browsing the web, but not during the first time setup when Google Sync was processing. Very odd, but I'm now at a point where I feel I can troubleshoot further. Not going to install any unnecessary apps until I get this fixed. The SpeedTest.net app is good to test your connectivity - data immediately drops when I run it.
Also keep in mind that when I say that the data connection drops, I mean the 3G icon itself completely disappears and I get a network error. So back to the drawing board.
This is what i have had to do to correct 99% of all my issues ... results may vary and I base this off my own personal experiences:
To undo any changes that the hidden menu would have changed, I did a "factory data reset" from within the privacy options. Not from clockwork and not from teh original "-Vol and power". Neither clockwork or stock data and cache wipe clean out dbdata. It has to be done within the system options. Those of you not able to add new gmail accounts and super sekr3t phone code problems need to wipe dbdata via this method. Odin backups only restore kernel, recovery and system. dbdata remains untouched and contains these configurations. Ever wonder why after a clockwork wipe, it still remembers your gps options after you selected english and proceeded to configure? Hope this helps.
I'll give that a shot now, but doesn't the manual method to remove voodoo wipe /dbdata?
BTW, I had to perform the wipes from stock and CWM recovery because the system was stuck in a force close loop.
EDIT: So I did the factory data reset from within the OS and as soon as I try to open the browser, the network connection drops off. Time to call CS for a replacement. :-/
OP: As long as you haven't tinkered with funky ROMs or lag fixes, I bet this will solve your problem. Like you said, a wipe can't hurt anything but convenience.
jokerls240 said:
EDIT: So I did the factory data reset from within the OS and as soon as I try to open the browser, the network connection drops off. Time to call CS for a replacement. :-/
Click to expand...
Click to collapse
well ... crap ... So much for me posting something useful for once
zeiroe said:
well ... crap ... So much for me posting something useful for once
Click to expand...
Click to collapse
The help doesn't go unappreciated. I've just played with too much experimental stuff, thinking XDA has never let me down. I'm glad you stepped up with a logical suggestion!
Let's just hope this works for the OP.
Thanks guys for trying so many methods. I have a feeling the unreachable phone firmware is storing this data, which means it may not have a reset at all. Some guy in a cubicle somewhere has a document which shows all of those settings.. we need to kidnap that guy.
Seriously, though, this may require a phone replacement if we cannot get someone to tell us what setting controls 1X enabling and tell us the value it needs to be set at.
The conspiracy theorist in me wonders if this was intentionally done by the factory (or Verizon) to detect tampering. Say, you always have to change X value to Y when entering a certain menu or the configuration goes pear shaped. If I were trying to detect phone hackers, this would be my method of detection/prevention. I'm evil like that >
jokerls240 said:
I really don't want to call Verizon, risking this becoming an insurance claim which requires a $150 deductable. I could drop Big Red and get an Epic or Evo with that money (contract is up in a couple weeks).
Click to expand...
Click to collapse
The deductible for an advanced device is $89, not $150
This is beyond awful. Now I don't have 3g OR 1x data. I'm using Wifi right now to make this post.
There must be a way to fix this!
Sent from my SCH-I500
If you restore default this settings will go back to default too
Sent from my SCH-I500 using XDA App
Also you can use oddin to restore the stock kernel and software
Sent from my SCH-I500 using XDA App
I think its funny that people havent done a FACTORY RESET before posting here. Then they post they don't want to do one because they will lose all their data. Big wow, back it up, do a reset, restore and boom alls good.
martouf13 said:
I think its funny that people havent done a FACTORY RESET before posting here. Then they post they don't want to do one because they will lose all their data. Big wow, back it up, do a reset, restore and boom alls good.
Click to expand...
Click to collapse
So you really think a factory reset messes with radio settings?
Interesting.
Sent from my SCH-I500 using XDA App

regaining data connection

Hi guys,
I tried to do a search but didn't find anything that worked...
I've been recently losing my 3g/1x data connection a lot for long periods of time (30 min or more). It's annoying since I can't check my e-mail, or listen to Pandora, basically all the things I got this phone for since I'm limited to what I can do on my computer at work.
Anyway, is there a bizarro fix for this? I've tried rebooting the phone, airplane mode on/off, and updating my profile. I remember with my old medium intelligence phone I could tell it to check my e-mail or something and trick it into waking up the data but no such luck as the phone complacently accepts there's a connection error.
Thanks in advance!
You may want to try letting folks know if you are running stock or a custom rom, which one it is and what modem version. Whenever I run into strange issues with my phone that isn't attributed to the rom I'm running, I just ODiN back and reflash through the process and that usually takes care of most problems. G'luck.
I have noticed mine does that too occasionally. Turning 4g on and then back off usually makes 3g start working again for me.
In my case my phone sometimes has trouble finding 3g after using wifi for a while, toggling 4g almost always makes 3g work again.
Sent from my SPH-D700 using XDA App
Oh right! I'm just on the stock rom.
Toggling 4g and wifi doesn't work for me. Thanks for the suggestion though.
It happens more at work so it probably has something to do with that. I generally always end up roaming but I haven't had trouble in the past with using roaming data. It still says unlimited on the Sprint account website and will come back every once and a while. (I know because it'll notify me of new mail or something random.)
are you in an area of low reception? that could cause it but not sure if there is a work around for it...
this same thing happens to my wife's epic.but not regularly..
I updated the prl and seems to stopped doing it,,
I was having the same issue coming out of Airplane mode. The 3G was coming back sporadically and then not at all. I called Sprint support and they had me do a phone Restore through the service menu ##3282# (you need your MSL) and it reset the phone like it was going through the activation process. It wasn't a factory reset so I didn't have to reinstall any apps. It did work the first time but after that it started happening again.
I finally went into the Sprint store and they did a hard reset, which is the same as a factory reset (I think) Settings>Privacy>Factory Data Reset. That was a couple of days ago and I haven't had the problem since.
Unfortunately, this requires completely wiping out your installed apps. I was on the stock rom and unrooted so I hadn't backed up with Titanium Backup (needs root). But I did use AppBak to backup my list of apps so that it was easier to restore them from the Market. If anyone knows a way to backup and restore similar to Titanium, that doesn't require root, let me know.
I was having the same problem with mine and nothing worked so they gave me another one. If it's that bad call sprint tech or take it they will probably give you another one
dennistpm said:
... If anyone knows a way to backup and restore similar to Titanium, that doesn't require root, let me know.
Click to expand...
Click to collapse
I use "Sprite Mechanic" for backing up my APK's to SD card. It only recognizes market and 3rd party installed apps. Can be found in the market for free.
Sent from my SPH-D700 using XDA App

Device keeps entering "Emergency Callback Mode" for no reason

I have an HTC Hero that keeps entering "Emergency Callback Mode" for what seems to be no reason at all. It mostly happens as soon as I answer an incoming call but also randomly in between.
This mode kills all data conenctions and prevents outgoing calls for 5:00. But, even if I say cancel, or wait the 5 minutes, it still stays on and I have to reset the device. It usually resolves itself after 45 mins or so. It happens once or twice a day.
I have researched the issue on google and I have found very little information about this problem. On some phones, this mode is enabled immediately after calling 911 to allow rescuers to call you back and locate you via GPS. I have never called 911 on this device.
I am currently running Cyanogen 7.1 RC2 ROM but I had the same issue on many different ROMS I tried so its not related to that.
on baseband 2.42.01.04.27. Maybe I should try downgrading it? How can I do that safely?
I really don't want to try reverting back to a stock ROM...
EDIT:
I think I posted this in the wrong forum, mod please move, sorry.
Hmmmm........so a complete doesn't solve the issue? And when you say ''sense'', does that mean with sense, it doesn't happen, but with the other Roms it does?
Try updating your radio to the latest .29
Yea its Me Again With the
Modified Hero
I just upgraded to the lastest baseband and it's still doing it.
I also figured out I can trigger the problem immediately by going to mobile network settings and changing my roaming preferences.
I should probably not that I recently repaired this phone and used QPST service programming tool to copy settings over from a touch pro 2 to the Hero. Could there maybe have been a wrong setting from the TP2 that is affecting the CDMA on this phone??
Just did a PRL update. No luck...
Did a succesful over-the-air profile and PRL update. Same problem...
ki1022 said:
Could there maybe have been a wrong setting from the TP2 that is affecting the CDMA on this phone??
Click to expand...
Click to collapse
Sounds like it. Is there no way to put everything back to default manufactured settings?
oohaylima said:
Sounds like it. Is there no way to put everything back to default manufactured settings?
Click to expand...
Click to collapse
I am considering using a stock RUU to completely wipe the phone to factory settings, but am trying to exhaust all my other options first so I won't have to re-root it and set everything up again... I'm almost at that point though.
ki1022 said:
I am considering using a stock RUU to completely wipe the phone to factory settings, but am trying to exhaust all my other options first so I won't have to re-root it and set everything up again... I'm almost at that point though.
Click to expand...
Click to collapse
!!!!!!!!!!!
FIXED IT SUCKAS.
Did a ##786# which reset all the CDMA settings, then re-did my NAM and data profile settings and it works. Go figure. Doing the ##786# on this phone also retained nearly everything including meid, baseband, recovery, and ROM. All it did was fix the problem. Awesome.
I still have no idea what was causing this to begin with, it was driving me crazy. Hopefully this thread will be helpful to someone else who has the issue.
On a side note, how dumb is this emergency mode?? So you call 911, then you can't call anyone else after that?? What if you need to call your wife and kids to say you love them one more time?! Haha.
Awesome!!!!!! Glad it's fixed. Now I'll just star this just in case it happens to me.

[Q] Need to bypass Blur Setup after reset

I had played with the Gingerblur and decided to reset to stock and ran the uninstall, all was good.
I then did a factory reset, and it came back with the motoblur setup. When I entered my info it tells me "Clock error, contact customer service"
If I can get PAST the screen, I can reinstall gingerblur or something.. this is rediculous.
If I can't bypass the screen, can I get to where i can set the device in debug mode to update the device?
any help greatly appreciated.
**UPDATE**
Tried yet again to connect with my motoblur account. But didn't let it use wifi this time and it won't even connect over the Cell connection at all. Could this be related to the push earlier? I didn't get the push .. hell if I know whats wrong with the darn thing.
I think you choose just press menu and you're able to skip it.
Sent from my MB860 using Tapatalk
no luck. you can edit APN settings and dial emergency, set USB mode and Wireless.. nothing else.
Resolution
Turns out the issue with the clock was an inability to connect. Somewhere between uninstalling Gingerblur and the default hard reset, the APN got deleted, and I had to rely on Wifi only.
Problem is I am in a hotel during the week, and this Wifi requires a web based log in to get an outside IP. So I drove around till I found an open Wifi.. and Moto let me log in and get past setup.
once that was done, had to readd the wap.cingular to the APN.
all works now.. what a pita.
sounds like it was a bad flash, I would suggest that if anyone else runs into this they try reflashing the 1.2.6 sbf
going to wait a week or so to see the progress of ROMS.. had it 6 days and if I brick it, the wife MAY shoot me dead.
Since Gingerblur isn't a full ROM replacement tho, it was fairly easy to remove it all to stock, even with the issues, which I know to look for now.
dont do a backup without solid wifi! in case the APN gets nailed

[Q] Mobile Data Will Not Stay Connected, Any Ideas?

Last night I went into Service Mode on my SGH-T889 and as soon as Service Mode opened, my 4G icon disappeared and then kept cutting on and off. I didn't even change any of the settings in Service Mode, I just left it as it was and rebooted. Now, after multiple restarts, re-entering the APN settings, and a hard reset, I'm still having this problem.
Has anyone else had a similar issue? Were you able to correct it, and if so, how? I have been searching all day but can't find a fix. I can still make and receive calls and texts, just can't stay connected steadily to use my internet connection. I am not rooted and I am using a Simple Mobile SIM card, running Android 4.3.
DivaB said:
Last night I went into Service Mode on my SGH-T889 and as soon as Service Mode opened, my 4G icon disappeared and then kept cutting on and off. I didn't even change any of the settings in Service Mode, I just left it as it was and rebooted. Now, after multiple restarts, re-entering the APN settings, and a hard reset, I'm still having this problem.
Has anyone else had a similar issue? Were you able to correct it, and if so, how? I have been searching all day but can't find a fix. I can still make and receive calls and texts, just can't stay connected steadily to use my internet connection. I am not rooted and I am using a Simple Mobile SIM card, running Android 4.3.
Click to expand...
Click to collapse
you more than likely change something unknowingly...
i did that once back in the day, with 'auto-answer mode'... Lol
didn't know why calls wouldn't come through for the longest time, then with enough playing around in service-mode, i found the option and changed it back. Lol
I'm unsure as to if there is a way to change all those settings back to default...
maybe the samsung flash tool would have something for this...
Personally, i would peek around in service mode, and try to deduct from the available options as to what might have changed, based on how comfortable you are with the options though, that might not be a good idea... google is a helper.
all else fails, if you can't use any warranty services for the device, they checking in the phone-specific forum and seeing if someone with the same/similar device can post their settings relative to the mobile network.
good luck

Categories

Resources