Related
Ok, I have been thrown for a loop and need some help....
I had a Sprint Hero Rooted on 2.1 the .5 sprint update
Tried to run the new update but it kept getting corrupt.
Did a Nandroid backup
So I reverted back to the .5 RUU
Then it wanted me to update to the old .6 update, so I did
Hoping then I would upgrade to the new .6 but it was not able to find a new update?
Wanted to restore my nandroid update.
When I try to boot into the recovery mode I get a picture of a phone with a red Explanation mark in a triangle.
There is a bunch of people on the net that say they have seen or gotten it, but no one says how to get rid of it? So I can not get in to recovery mode at all.
Tried the home+power boot
Tried the volume down + power then home
always ends in the same screen with no recovery.
Tried multiple times to install the .5 RUU
Reset phone
never can get back there to the recovery?
Phone will boot fine into 2.1 and run fine..
Anyone have any ideas, I have tried everything I can think of.
Thanks
Did u try placing the recovery on ur SD card and flashing it threw terminal on ur phone
Root-Hack-Mod-Always™
You lost root, as far as I remember the .6 update was to block the corrent rooting efforts that you see around here, thats why the rooting instruction say to go back to the .5 ruu.
The corrupted update your getting is just sprints server being bogged down.
What you need todo is go back and re-root your phone. Dont worry about the update untill it gets released into one of the current roms or until you here that its safe todo without losing root.
ASimmons said:
You lost root, as far as I remember the .6 update was to block the corrent rooting efforts that you see around here, thats why the rooting instruction say to go back to the .5 ruu.
The corrupted update your getting is just sprints server being bogged down.
What you need todo is go back and re-root your phone. Dont worry about the update untill it gets released into one of the current roms or until you here that its safe todo without losing root.
Click to expand...
Click to collapse
Thanks, I can't believe I missed that! I had never tried a backup before root, so I did not think about that. Now I know and hopefully this will help someone that googles this issue, as there is never a clear answer until yours.
Thanks again...
So in closing of this thread:
if you are trying to get into recovery and see "Phone with Explanation mark" image.
it's because your phone is not rooted
So root your phone and it's all good
Also If you ever run an ruu on your phone you can kiss your root good bye no matter what version you do. but if you have nand backups you can reroot your phone and then restore one of your backups since there stored on your sdcard.
copc said:
So in closing of this thread:
if you are trying to get into recovery and see "Phone with Explanation mark" image.
it's because your phone is not rooted
So root your phone and it's all good
Click to expand...
Click to collapse
Correction: If you see this symbol, it means you don't have a custom recovery image in the phone. You can actually be rooted and still get that symbol if you haven't yet flashed a custom recovery after you rooted. You need to have a custom recovery (that requires root) to avoid getting that symbol when you try to boot into recovery.
Most rooting methods on here automatically include flashing a custom recovery as one of the steps, so this isn't really a big issue....but I just wanted to clarify the specifics of this for anyone else who reads.
copc said:
So in closing of this thread:
if you are trying to get into recovery and see "Phone with Explanation mark" image.
it's because your phone is not rooted
So root your phone and it's all good
Click to expand...
Click to collapse
I am running a rooted 2.1 and get this symbol , i installed rom manager and it asked me to install flash clockworkmod recovery and it booted into recovery straight away allowing me to partition my sd card, but if i want to access this mode i have to run flash clockworkmod recovery everytime or it will not work
Any idea why that is anyone?
brisuth said:
I am running a rooted 2.1 and get this symbol , i installed rom manager and it asked me to install flash clockworkmod recovery and it booted into recovery straight away allowing me to partition my sd card, but if i want to access this mode i have to run flash clockworkmod recovery everytime or it will not work
Any idea why that is anyone?
Click to expand...
Click to collapse
Nope once its on there you should be able to hold the home key while rebooting to get into recovery.
Sent from my HERO200 using XDA App
ASimmons said:
Nope once its on there you should be able to hold the home key while rebooting to get into recovery.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
only way can get there is through flash clockworkmod recovery then select either reboot in recovery mode or turn of handset and restart with home and power button, what ever flash clockworkmod recovery does to make it work as soon as it has been used i am guessing it is deleted or modified,
i have tried running it then checking files on sd card but cant see anything different
brisuth said:
only way can get there is through flash clockworkmod recovery then select either reboot in recovery mode or turn of handset and restart with home and power button, what ever flash clockworkmod recovery does to make it work as soon as it has been used i am guessing it is deleted or modified,
i have tried running it then checking files on sd card but cant see anything different
Click to expand...
Click to collapse
The recovery console isn't on your SD card, it's flashed to a partition inside your phone's memory. So you won't see anything different on your card.
And if you can boot into recovery by "restart with home and power button" like you say, then it's working as it should -- that's how you get into recovery.
chromiumleaf said:
The recovery console isn't on your SD card, it's flashed to a partition inside your phone's memory. So you won't see anything different on your card.
And if you can boot into recovery by "restart with home and power button" like you say, then it's working as it should -- that's how you get into recovery.
Click to expand...
Click to collapse
just had a friendly member point out what i was starting to suspect the problem lies with the custom recovery being flashed back to stock on every restart, the shell command here
/system/etc/install-recovery.sh this stops any custom recovery on reboot. any advice on what tools to edit or remove
Delete that file when you get root I guess. Our as soon as you reboot into clockwork recovery, flash a rom. Use nfinitefx if you want a stock one
Sent from my HERO200 using XDA App
I always had root that was where the confusion was, what i did not know was the script was running with every boot of the handset and removing the recovery that was there as it was identified as unofficial and exclamation mark could be down to me using many methods to flash i may have renamed original recovery so when it goes to exclamation it is because cant find original recovery whether handset is rooted or not.
danaff37 said:
Delete that file when you get root I guess. Our as soon as you reboot into clockwork recovery, flash a rom. Use nfinitefx if you want a stock one
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
would that have worked? i thought about it many many times but as i had never flashed before was unsure how many times phone would reset and if it did before it was installed could i lose my recovery.
on the plus side the 2 months i have spent trying to solve this i have a much broader view of the workings of my handset and without the many members like yourself who take the time to reply and try to help others i would have given up a long time ago.
Brian
I'm sure if you deleted that script a custom recovery would have stuck
Sent from my HERO200 using XDA App
After the OTA update killed my phone, I used Odin to recover and then put Bionix 1.9 on my phone. Everything was good until last night when I tried to put the 1.91 update on. It looks like I have lost root and/or superuser permissions. I ran Clockwork recovery to load the ROM and it booted, let me pick the ROM and then started giving me error messages like:
The application Superuser Permissions (process com.noshufou.android.su) has stopped unexpectedly. Please try again. And force close.
Now Titanium backup and other root apps won't work. I tried unrooting and re-rooting with no luck. What should I do?
In Rom Manager run > Fix Permissions.
If that doesn't work un-install Superuser and reinstall.
I don't seem to be able to uninstall superuser. It's like I lost root and can't get it back. There is no superuser app listed to uninstall.
You're probably just better off ODINing back to stock and flashing straight to Bionix 1.9.1. There's some releases of Bionix 1.9 that had some issues, you may have gotten a bad copy.
I am downloading the stock image to my home computer now. Something is all screwed up with my permissions.
I am new to the Samsung so I have a noob question, why do some roms only let you Odin and others clockwork install? I prefer using Odin on the Samsung but I don't know if I can install the Bionix that way. Almost everything on the MT3G side with Cyanogen was done through the boot loader. Even on the MT3G I have had problems with Clockworks from time to time.
Can I extract the Bionix file and use Odin? Sorry for the stupid questions I am just trying to figure this out!
Good question. I myself prefer Clockwork to flash ROMs, since I think it's a lot faster and more convenient than messing with Download Mode. As far as I know, Bionix is only flashable via ROM Manager / Clockwork.
It's all about the way they package it. Sombionix must prefer clockwork installs so he does it that way. I always go download mode if I can. Much more reliable in my eyes.
zaduma said:
It's all about the way they package it. Sombionix must prefer clockwork installs so he does it that way. I always go download mode if I can. Much more reliable in my eyes.
Click to expand...
Click to collapse
Same here I always flash from Recovery Mode opposed to Rom Manager for flashing new roms.
I went back to the stock rom and now the phone won't come up. It loads the Vibrant screen then the T-Mobile screen finally the Galaxy S and then goes blank. Is it dead? I have tried flashing it back to the stock rom a few times and it looks like it is working. It does give a message that says it can't wipe the data though.
What should I do?
cyberpyr8 said:
I went back to the stock rom and now the phone won't come up. It loads the Vibrant screen then the T-Mobile screen finally the Galaxy S and then goes blank. Is it dead? I have tried flashing it back to the stock rom a few times and it looks like it is working. It does give a message that says it can't wipe the data though.
What should I do?
Click to expand...
Click to collapse
I'm assuming that you've got a decent charge on the phone (>65%) since you haven't been using it. You can get into download mode just fine right? What version of Odin are you running 1.0 or 1.3? Which stock JFD package did you download? This one has worked for me in the past.
~SB
I used the 1.3 Odin. I reinstalled the drivers from the package I found here forum.xda-developers.com/ showthread.php?t=803492
I can still get into download mode. I think the battery is above 65% still. I have had it hooked most of the afternoon.
I had also tried the download you linked to.
I just tried again with the files you posted and the same results. It keeps saying that it can't format the data / do the wipe.
cyberpyr8 said:
I just tried again with the files you posted and the same results. It keeps saying that it can't format the data / do the wipe.
Click to expand...
Click to collapse
Lemme look around the forums and see what I can find. This phone is pretty resistant to bricking. I'm sure there's a fix for this in one of the few million posts here.
Thanks! I can't wait 7 days for a replacement phone.
Try this thread and see if it works for you. Seems like some people were having the same issues.
~SB
I am at the Android System Recovery and it boots with the error like it is supposed to but I can't seem to get the command prompt step. It says to go to a command prompt and run ADB Reboot. Where do I find the A It looks like this DB command at?might work if I can get the phone to reboot.
Edit: I see it is in the SDK.
It's alive!! Thanks SB for all of your help. I have Froyo running. I will leave it there for now.
This site is a better source of help than any other. Thanks again.
cyberpyr8 said:
It's alive!! Thanks SB for all of your help. I have Froyo running. I will leave it there for now.
This site is a better source of help than any other. Thanks again.
Click to expand...
Click to collapse
Glad to help! The answer is always here....somewhere...
~SB
Sent from my SGH-T959 using XDA App
I ran into this as well all u have to do is a factory reset after Odin the ji6 update
Sent from my SGH-T959 using XDA App
I had this same problem.
cyberpyr8 said:
The application Superuser Permissions (process com.noshufou.android.su) has stopped unexpectedly. Please try again. And force close.
Click to expand...
Click to collapse
I corrected it by going to SETTINGS>APPLICATIONS>MANAGE APPLICATIONS>ALL>SUPERUSER PERMISSIONS>CLEAR DATA
Hope it works for you!
I appear to have messed up seriously, was trying out a voodoo kernal, then tried to flash a few .zip file sin cwm...wouldnt let me, so i tried to disable voodoo via the uninstaller...no dice, reflashed all stock...yay, went to install rom manager, wouldnt let me download on the market, even on wifi...so i tried flashing a backup via cwm recovery...now i cant boot into anything but recovery.
http://forum.xda-developers.com/showthread.php?t=782204
flashed all 3, why i'm alil nervous i cant get past recovery
you odined right?
try this
http://forum.xda-developers.com/showthread.php?t=867648
then re root
yes, still goes straight to recovery...doesnt even try to boot
blue recovery or something else?
the post above should get you to stock using odin ...period
blue, trying full package now, Now i get a wiping data wiping cache loop, doesnt even let me into recovery.
ok that is weird....that package should have fixed it....reflash using odin....try it again and see what happens
make sure you flash using PDA ...if you flashed using phone you r fubared
only use pda, really confused...worked first time around, can only think it has something to do with the remove voodoo zip file
the bad part is that full odin file nulifys all else...it should anyway...so now you cant even manually get into recovery?
never seen this kinda loop tho, like wont even let me goto recovery keeps comming up saying its wiping stuff...then reboots. GOT IT!
pull battery and usb ....still does it ?
Thanks for your help brother...it is booting...that was scary, lol
np anytime .....
You know what's really scary?
That this was posted in the Development section instead of the General section. You almost bricking your phone doesn't count as development.
My phone isn't a brick but it might as well be, I flashed a CM7 build but didn't much like it so I never bothered to add the Google Apps, instead, I did a restore to my original MyTouch 4G backup but.... it didn't work, got a flashing screen, etc. so back to the CM7 build, now I can't run ROM Manager, it goes to the red triangle symbol, I can't run ADB, it won't find my phone, I can't root, it just keeps saying S=ON! Since I didn't add the Google Apps and can't now, I can't use the phone!
Am I out a MyTouch 4g? Is there anything that'll fix it?
xs11e said:
My phone isn't a brick but it might as well be, I flashed a CM7 build but didn't much like it so I never bothered to add the Google Apps, instead, I did a restore to my original MyTouch 4G backup but.... it didn't work, got a flashing screen, etc. so back to the CM7 build, now I can't run ROM Manager, it goes to the red triangle symbol, I can't run ADB, it won't find my phone, I can't root, it just keeps saying S=ON! Since I didn't add the Google Apps and can't now, I can't use the phone!
Am I out a MyTouch 4g? Is there anything that'll fix it?
Click to expand...
Click to collapse
What google apps are you looking for, 99% of them can be found online and installed. Have you tried the online Android market (it can send downloads directly to your device) https://market.android.com/
You might be able use visionary to temp root the device, that will get you started
Bupahs said:
What google apps are you looking for, 99% of them can be found online and installed. Have you tried the online Android market (it can send downloads directly to your device) https://market.android.com/
You might be able use visionary to temp root the device, that will get you started
Click to expand...
Click to collapse
Online market won't install because I've flashed my HD2 to Android so it keeps saying that everything is already installed.
Visionary won't temp root, nothing will, don't know why? Do you know just how many rooting proceedures there are on the WWW? I've tried each that I've found 3 or more times with no luck.
I'm going to try to see if the online market will allow me to install Root Explorer, that may help me some....
It won't. There seems no way to change phones???
xs11e said:
My phone isn't a brick but it might as well be, I flashed a CM7 build but didn't much like it so I never bothered to add the Google Apps, instead, I did a restore to my original MyTouch 4G backup but.... it didn't work, got a flashing screen, etc. so back to the CM7 build, now I can't run ROM Manager, it goes to the red triangle symbol, I can't run ADB, it won't find my phone, I can't root, it just keeps saying S=ON! Since I didn't add the Google Apps and can't now, I can't use the phone!
Am I out a MyTouch 4g? Is there anything that'll fix it?
Click to expand...
Click to collapse
When you tried to restore, did you flash the recovery back to version 2.x? You need a 2.x recovery (use 2.5.1.2) to flash CM6, stock, and other Froyo roms. This should let you restore back to stock. Supposedly clockworkmod 3.0.0.6 can flash back and forth between Froyo and Gingerbread roms, but I haven't tried it yet.
Thanks but whatever version of Clockworkmod I have is what I have since the critter won't allow anything to be changed???
I can't get into Clockworkmod so I think changing versions won't help but I can't change so it's sort of moot at this point. The phone will do either one of these things:
1. Boot normally into the partial CM7 build which isn't usable as explained elsewhere.
2. It'll do the hold Vol Dn and hit power boot but then it won't do anything, the only option that works is normal boot and then I'm right back into CM7.
3. I can select "restore" or boot normally and select ROM Manager and hit boot into recovery and it'll reboot to the error screen, red triangle with ! sign on it.
That is the stock Recovery (which doesn't do anything but display the lovely triangle).
If Rom Manager is running in your broken CM7 system, you could re-flash Clockwork Recovery.
You can also flash a Clockwork Recovery image using adb or Fastboot.
xs11e said:
Thanks but whatever version of Clockworkmod I have is what I have since the critter won't allow anything to be changed???
I can't get into Clockworkmod so I think changing versions won't help but I can't change so it's sort of moot at this point. The phone will do either one of these things:
1. Boot normally into the partial CM7 build which isn't usable as explained elsewhere.
2. It'll do the hold Vol Dn and hit power boot but then it won't do anything, the only option that works is normal boot and then I'm right back into CM7.
3. I can select "restore" or boot normally and select ROM Manager and hit boot into recovery and it'll reboot to the error screen, red triangle with ! sign on it.
Click to expand...
Click to collapse
As mentioned the red triangle is the stock recovery. Not sure how you flashed CM7 with the stock recovery but for some reason it sounds like that is all you have on your phone. FYI...If you hold the vol up and power button at the red triangle screen it should boot you into the stock recovery.
A couple of things that caught my eye. You say that your phone now says s=on. did it used to say s=off? When you say you went back to CM7 after trying to flash your backup, what steps did you take to try and go back? Was your backup made thru Rom Manager? Did you try to use Rom Manager to restore your backup?
First thing I would try is a full wipe and factory reset from the stock recovery if you can get there. You need to try and get CM7 to load correctly. If you can do that then you should be able to flash a new recovery. You dont need s=off to flash roms but you do need root.
Do you still have root acces? Ie: can you use SuperUser? Try a few root apps and see if they as for su permission.
jggimi said:
That is the stock Recovery (which doesn't do anything but display the lovely triangle).
If Rom Manager is running in your broken CM7 system, you could re-flash Clockwork Recovery.
You can also flash a Clockwork Recovery image using adb or Fastboot.
Click to expand...
Click to collapse
Thanks, ROM manager is running but re-flashing Clockwork Recovery doesn't help anything, it completes successfully but any attempt to do anything with it gets me to the red triangle.
I wish I could flash a recovery image using ADB or Fastboot, neither will function.
TrueBlue_Drew said:
As mentioned the red triangle is the stock recovery. Not sure how you flashed CM7 with the stock recovery but for some reason it sounds like that is all you have on your phone. FYI...If you hold the vol up and power button at the red triangle screen it should boot you into the stock recovery.
Click to expand...
Click to collapse
Correct, that's all that's there or at least all I can access so far. Vol up + pwr does boot me into stock recovery but that doesn't help.... <sigh>
A couple of things that caught my eye. You say that your phone now says s=on. did it used to say s=off? When you say you went back to CM7 after trying to flash your backup, what steps did you take to try and go back? Was your backup made thru Rom Manager? Did you try to use Rom Manager to restore your backup?
Click to expand...
Click to collapse
Yes, I did have S=off to flash. Steps trying to go back were none, really, after the restore failed the phone wouldn't do anything as detailed in my posts. The backup was made through Rom Manager and that's what I used to try the restore.
First thing I would try is a full wipe and factory reset from the stock recovery if you can get there. You need to try and get CM7 to load correctly. If you can do that then you should be able to flash a new recovery. You dont need s=off to flash roms but you do need root.
Do you still have root acces? Ie: can you use SuperUser? Try a few root apps and see if they as for su permission.
Click to expand...
Click to collapse
Wiped and factory reset several times with no change in the problem. I'd love to get CM7 to load correctly but since I didn't originally load the GAPPS it's pretty useless, no gmail, no contacts or calendar, no Android market (which means all that's on the phone is all I can get, the online market won't work as mentioned in a previous post.) I cannot flash a new recovery, that's what I've been trying to do for several days now.
I do have root access, I can use SuperUser but it doesn't seem to do anything. Attempts to re-root have failed.
i feel ya bro, the reason I am asking these questions is to try and figure out what you have tried and not tried. CM7 isnt useless if you can get it to load. Just because you dont have the gapps installed, that shouldnt do anything but make you not have the market and google apps. Do you have adb set up and will it recognize your device? The biggest question is why would it have turned s=on and why wouldnt rom manager be able to flash a new recovery. Rom manager has a problem making/flashing backups using 3.0.0.X recoveries so that is where this problem started I think. Thats why I am trying to get you a clean working CM7. Does it give you a error when trying to install recovery through rom manager? Have you tried going to applications/manage applications/all/Rom Manager and clearing the data?
If you have su access you might also be able to flash a new recovery via terminal emulator.
Thanks, I appreciate the help and sympathy! I've fixed it in a very unorthodox way, it involved going to T-Mobile's website, changing phone to Blackberry 9700, moving SIM to 9700 and switching data plan to Blackberry.
Dang, that's a little screen....
The reason I'm maybe not giving you all the information you need is that I have very bad arthritis in my hands and I try to type as little as possible, I'm sorry if I'm not being clear but don't hesitate to ask if you need more info.
Not having the gmail means no sync, can't import contacts or calendar, no apps means what I have on the phone is ALL I HAVE, I can't get anything else. That's why I say it's unusable.
ADB does not recognize the device.
Installing recovery through Rom manager results in red triangle.
I did clear Rom manager data as you suggested but it didn't help.
How could I flash recover through terminal emulator, I do have that and can access it and typing SU does give me the # prompt so that's helpful maybe? I'd need step by step directions because I'm very unfamiliar with using terminal emulator, I've only used it to follow directions given in the rooting instructions.
xs11e said:
Thanks, I appreciate the help and sympathy! I've fixed it in a very unorthodox way, it involved going to T-Mobile's website, changing phone to Blackberry 9700, moving SIM to 9700 and switching data plan to Blackberry.
Dang, that's a little screen....
The reason I'm maybe not giving you all the information you need is that I have very bad arthritis in my hands and I try to type as little as possible, I'm sorry if I'm not being clear but don't hesitate to ask if you need more info.
Not having the gmail means no sync, can't import contacts or calendar, no apps means what I have on the phone is ALL I HAVE, I can't get anything else. That's why I say it's unusable.
ADB does not recognize the device.
Installing recovery through Rom manager results in red triangle.
I did clear Rom manager data as you suggested but it didn't help.
How could I flash recover through terminal emulator, I do have that and can access it and typing SU does give me the # prompt so that's helpful maybe? I'd need step by step directions because I'm very unfamiliar with using terminal emulator, I've only used it to follow directions given in the rooting instructions.
Click to expand...
Click to collapse
to flash a recovery image via terminal emulator if you are on cm7 is:
Type "su" and then enter the code below after putting the recovery on your sd card. Make sure you name it recovery.img
Code:
flash_image recovery /sdcard/[COLOR=black]recovery.img[/COLOR]
LMK if that works.
Thanks, I'm not sure what I expected but what happened is exactly nothing:
Put Recovery.img on card, booted up phone, started Terminal Emulator got:
export PATH=/data/local/bin:$PATH
$ export PATH=/data/local/bin:$PATH
$ su
# flash_image recovery /sdcard/recovery.img
#
And that's it, nothing happened at all, just went back to the # prompt.
xs11e said:
Thanks, I'm not sure what I expected but what happened is exactly nothing:
Put Recovery.img on card, booted up phone, started Terminal Emulator got:
export PATH=/data/local/bin:$PATH
$ export PATH=/data/local/bin:$PATH
$ su
# flash_image recovery /sdcard/recovery.img
#
And that's it, nothing happened at all, just went back to the # prompt.
Click to expand...
Click to collapse
As long as you named it recovery.img and not Recovery.img it should have worked. Try to boot into recovery by powering off your phone and then holding the vol but and power button at the same time. Then chose recovery. Or if you on CM7 just hold power button for a sec and then reboot and recovery.
LMK if that works.
I checked the name several times, booting into recovery just takes me to the red triangle, I've tried that many times before, nothing's changed.
I suspect it's a brick?
xs11e said:
I checked the name several times, booting into recovery just takes me to the red triangle, I've tried that many times before, nothing's changed.
I suspect it's a brick?
Click to expand...
Click to collapse
ok, I still dont believe its a brick. Are you running a rom at all? I mean does it boot into CM7 even though you dont have Gapps? Or is it totaly stuck on bootloop all the time. I am going to send you a PM with my Gtalk. Add me if you want and maybe it will make it a little easier to communicate and help.
TrueBlue_Drew said:
ok, I still dont believe its a brick. Are you running a rom at all? I mean does it boot into CM7 even though you dont have Gapps? Or is it totaly stuck on bootloop all the time.
Click to expand...
Click to collapse
It boots right up in CM7, if I'd added the Gapps at the beginning I'd just be running it happily I think? I'd be able to sync and get needed apps from the market, etc. etc.
I am going to send you a PM with my Gtalk. Add me if you want and maybe it will make it a little easier to communicate and help.
Click to expand...
Click to collapse
Thanks, I'd really prefer to do it this way. Why? Because I'm really sick of messing with it and I hate to spend much time working on it now, I've resigned myself to having a very costly paperweight! Using the thread here allows me to check in once or twice a day when the urge strikes, besides, I really don't IM, never have, never could figure it out. I don't text either, it's blocked at T-Mo's website and on my phones as well. I'm not really a technophobe but I'm 99.2 % one.....
That's fine. I was just trying to maybe make it a little easier in ya.
If you can install a .apk I can send you the market and a few things. We can try to get a few things going that way if you want. If we can get the market going you can get gmail and every thing else from there. will attach the market and tell you how to install if you want
Sent from my HTC Glacier
If he's still s=on, he's not going to be able to flash recovery. You need to get s=off.
Grab the .apk for Visionary. Grab gfree. Grab an apk for a terminal emulator if you don't have one. Put them all on your sdcard, boot into CM7, and follow the instructions for the gfree method here:
http://forum.xda-developers.com/showthread.php?t=858996
If you don't have a file manager to get to them, you could try SMS'ing the download links to the phone and installing through the browser for the .apk's.
TrueBlue_Drew said:
That's fine. I was just trying to maybe make it a little easier in ya.
If you can install a .apk I can send you the market and a few things. We can try to get a few things going that way if you want. If we can get the market going you can get gmail and every thing else from there. will attach the market and tell you how to install if you want
Sent from my HTC Glacier
Click to expand...
Click to collapse
I can't install an APK. I got all the Google apps and put them on the SD card, if I click on one I get "couldn't parse the file" what ever that means?
Actuall, it did install the Market apk but it won't open.....
Hi, I used the paid version of ClockWorkMod Recovery to backup, then download the 'Cyclonic Rom'. Well, it rebooted to a 'Cyclonic Rom' startup screen (animated lettering) - but that's it. I'm wary to unplug the battery if it's actually flashing, but this has been going on for 20 minutes or more. Can I pull the battery and see what happens? How long does a new ROM take to install, this is my first one. Thanks.
BTW: These CAPTHCA's are getting tough! This will be the 4th try!
fixed it
I unplugged the battery and did a factory reset/format in ClockWorkMod. I rebooted and all seems well so far.
20 minutes is a looong time for Cyclonic to boot. Is it still working ok? As far as CW goes, I only use Rom Manager to downlod what I want/need. When it comes to flashing I wipe everything manually and flash from recovery. I don't trust the app. But thats me.
Sent from my PG06100 using xda premium
+1 to that. I always use the same Method for Flashing Roms ( The one linked in my Sig ) . Clear everything Manually. I try to never deviate from that. Reason being, after Flashing literally hundreds of times I've found it to be the most reliable way to Flash a Rom. Meaning the least amount of possibilities for issues later on down the road .
alarmpro said:
Hi, I used the paid version of ClockWorkMod Recovery to backup, then download the 'Cyclonic Rom'. Well, it rebooted to a 'Cyclonic Rom' startup screen (animated lettering) - but that's it. I'm wary to unplug the battery if it's actually flashing, but this has been going on for 20 minutes or more. Can I pull the battery and see what happens? How long does a new ROM take to install, this is my first one. Thanks.
BTW: These CAPTHCA's are getting tough! This will be the 4th try!
Click to expand...
Click to collapse
Flash newsense.
And don't forget to wipe dalvik.
I have been searching (as in using the 'search' function) for a solution or answer to this, but couldn't find anything. This seemed to be the best thread to dig up instead of starting a new one.
Within Clockworkmod, whenever I try to go into recovery (either trying to 'reboot into recovery' or installing a ROM from SD card), it always throws me into Android System Recovery 3e instead of CWM recovery. Of course the stock recovery doesn't recognize my downloaded ROM.
I've also noticed that trying to update a ROM in HBOOT via a new PG06IMG.zip file on SD root is not working, except to wipe all my system and apps data, and then returning me back to rooted 2.2. HBOOT seems to read the new zip file fine, but when I reboot nothing has changed.
I've read wiki and lots of other stuff, but I can't seem to find an answer except that MAYBE that I need a new kernel first??? Okay, let the flaming begin.
jdjohn said:
I have been searching (as in using the 'search' function) for a solution or answer to this, but couldn't find anything. This seemed to be the best thread to dig up instead of starting a new one.
Within Clockworkmod, whenever I try to go into recovery (either trying to 'reboot into recovery' or installing a ROM from SD card), it always throws me into Android System Recovery 3e instead of CWM recovery. Of course the stock recovery doesn't recognize my downloaded ROM.
I've also noticed that trying to update a ROM in HBOOT via a new PG06IMG.zip file on SD root is not working, except to wipe all my system and apps data, and then returning me back to rooted 2.2. HBOOT seems to read the new zip file fine, but when I reboot nothing has changed.
I've read wiki and lots of other stuff, but I can't seem to find an answer except that MAYBE that I need a new kernel first??? Okay, let the flaming begin.
Click to expand...
Click to collapse
You need to flash recovery first, it is the first option in ROM Manager. You can't update a ROM with PG06IMG.zip, nor can you do it in the bootloader. Flash the recovery, wipe everything (data, cache, dalvik cache, system, sd-ext) then flash a ROM.
Did you get this sorted?
bilgerryan said:
You need to flash recovery first, it is the first option in ROM Manager. You can't update a ROM with PG06IMG.zip, nor can you do it in the bootloader. Flash the recovery, wipe everything (data, cache, dalvik cache, system, sd-ext) then flash a ROM.
Click to expand...
Click to collapse
Chad The Pathfinder said:
Did you get this sorted?
Click to expand...
Click to collapse
No, still having trouble. I have flashed ClockworkMod Recovery (version 5.0.2.0) in the ROM Manager app, but when I 'reboot into recovery' within the app, it goes to the Android System Recovery. I'm also confused about the 'apply sdcard:update.zip' option in ASR...seems like that would update something if the file was set up properly.
I guess I need to search for a tutorial on how ASR and HBOOT work. Sorry to bother you guys with the basics.
Try this onehttp://forum.xda-developers.com/showthread.php?t=1663531
bilgerryan said:
Try this onehttp://forum.xda-developers.com/showthread.php?t=1663531
Click to expand...
Click to collapse
Will check it out, thanks! I'm leaving town today, so not sure if I will be able to experiment before I go, but I will not give up!
The only thing I use Rom Manager for is to get the recovery. The way I go into recovery is to turn my shift completely off (do a battery pull to make sure its completely off) then hold the volume down and power buttons at the same time until the bootloader screen comes on. (While there see if it says S-off near the top) then using the volume buttons highlight the recovery option and push the power button. Then when you're there use the volume buttons to navigate through the various fields and hit enter to select. I hope this is helpful to you. Good luck!
Edit: by the way, when you first get to the bootloader screen, it will automaticly do a check showing a few green lines. Thats ok. Just wait until its finnished then go into recovery the way I stated.
jdjohn said:
Will check it out, thanks! I'm leaving town today, so not sure if I will be able to experiment before I go, but I will not give up!
Click to expand...
Click to collapse
How did you root? It seems as if you have a locked bootloader and/or S-ON if the custom recovery is not taking
Sent from my PG06100 using xda premium
CNexus said:
How did you root? It seems as if you have a locked bootloader and/or S-ON if the custom recovery is not taking
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
From bootloader screen:
Speedy XE Eng S-OFF
Hboot-0.93.2011 (PG0610000)
Radio-1.08.01.0111
eMMC-boot
Nov 15 2010, 13:16:46
I haven't tried Dread's CW-Enhanced yet. I just don't understand why the standard CWM recovery from ROM Manager doesn't work. I'm probably missing something obvious.
jdjohn said:
From bootloader screen:
Speedy XE Eng S-OFF
Hboot-0.93.2011 (PG0610000)
Radio-1.08.01.0111
eMMC-boot
Nov 15 2010, 13:16:46
I haven't tried Dread's CW-Enhanced yet. I just don't understand why the standard CWM recovery from ROM Manager doesn't work. I'm probably missing something obvious.
Click to expand...
Click to collapse
Just flash Dread's in bootloader, make sure it is named PG06IMG.zip (that is a zero) and place on the root of your SD and go back into the bootloader and hit update when it tells you to.
bilgerryan said:
Just flash Dread's in bootloader, make sure it is named PG06IMG.zip (that is a zero) and place on the root of your SD and go back into the bootloader and hit update when it tells you to.
Click to expand...
Click to collapse
Was thinking that myself. Will have to wait til I get back, though...headed out of town. Thanks guys!
jdjohn said:
From bootloader screen:
Speedy XE Eng S-OFF
Hboot-0.93.2011 (PG0610000)
Radio-1.08.01.0111
eMMC-boot
Nov 15 2010, 13:16:46
I haven't tried Dread's CW-Enhanced yet. I just don't understand why the standard CWM recovery from ROM Manager doesn't work. I'm probably missing something obvious.
Click to expand...
Click to collapse
Hmm, never mind then, it seemed as if your bootloader was still locked if the recovery wouldnt flash
bilgerryan said:
Just flash Dread's in bootloader, make sure it is named PG06IMG.zip (that is a zero) and place on the root of your SD and go back into the bootloader and hit update when it tells you to.
Click to expand...
Click to collapse
Yeah, just do what bilgerryan said (make sure that you download the one that says "flash through bootloader" or something along those lines)
Before flashing, download some md5sum tool and make sure it matches the one given on there
Sent from my PG06100 using xda premium
Finally got back to this and was able to install and use Dread's CW-Enhanced. So far I have only flashed the Speedy Rooted OTA 2.77.651.8 (bascially 2.3.4 rooted). GB had some features I was wanting, but missing, after rooting back to Froyo.
But before continuing on to other ROMs, I was wondering how you guys handle restoring basic apps and data each time you flash a new ROM. Or, do you only use extra play phones for new ROMs and not your daily user? It would seem that every time you flash, you need to restore SuperUser, Titanium, ROM Manager (ClockworkMod, then probably Dread's enhanced image file), Terminal Emulator, etc. And of course contacts and messaging history and other stuff like that.
So far, after flashing a ROM, I usually download Titanium (or MyBackup) and restore apps and data from backups before continuing. Do you just keep certain APK files on your SD card and install from ADB instead of re-downloading from Google Play Store each time?
I flash ROMs on my dd. Usually when I falsh a new ROM (not a nandroid) I fresh install my apps through the play store. Especially if switching between GB, ICS and JB! Some apps work well if carried over by tb but not all. You'll just have to experiment to see what works with your shift and what doesn't.
Also, the recovery only ever needs to be flashed once
What I used to do is backup my current rom with all my data and settings and then wipe + flash a new rom. If i liked it, then I would move my full box of apps and data to the new rom, but restoring data can go wonky so I always made a backup before doing that too. If i didnt like it, I would either restore my original backup for a bit or keep flashing new roms until I either found one I liked or got tired and restored my backup lol