[Q] Lost Superuser permissions - Vibrant General

After the OTA update killed my phone, I used Odin to recover and then put Bionix 1.9 on my phone. Everything was good until last night when I tried to put the 1.91 update on. It looks like I have lost root and/or superuser permissions. I ran Clockwork recovery to load the ROM and it booted, let me pick the ROM and then started giving me error messages like:
The application Superuser Permissions (process com.noshufou.android.su) has stopped unexpectedly. Please try again. And force close.
Now Titanium backup and other root apps won't work. I tried unrooting and re-rooting with no luck. What should I do?

In Rom Manager run > Fix Permissions.
If that doesn't work un-install Superuser and reinstall.

I don't seem to be able to uninstall superuser. It's like I lost root and can't get it back. There is no superuser app listed to uninstall.

You're probably just better off ODINing back to stock and flashing straight to Bionix 1.9.1. There's some releases of Bionix 1.9 that had some issues, you may have gotten a bad copy.

I am downloading the stock image to my home computer now. Something is all screwed up with my permissions.
I am new to the Samsung so I have a noob question, why do some roms only let you Odin and others clockwork install? I prefer using Odin on the Samsung but I don't know if I can install the Bionix that way. Almost everything on the MT3G side with Cyanogen was done through the boot loader. Even on the MT3G I have had problems with Clockworks from time to time.
Can I extract the Bionix file and use Odin? Sorry for the stupid questions I am just trying to figure this out!

Good question. I myself prefer Clockwork to flash ROMs, since I think it's a lot faster and more convenient than messing with Download Mode. As far as I know, Bionix is only flashable via ROM Manager / Clockwork.

It's all about the way they package it. Sombionix must prefer clockwork installs so he does it that way. I always go download mode if I can. Much more reliable in my eyes.

zaduma said:
It's all about the way they package it. Sombionix must prefer clockwork installs so he does it that way. I always go download mode if I can. Much more reliable in my eyes.
Click to expand...
Click to collapse
Same here I always flash from Recovery Mode opposed to Rom Manager for flashing new roms.

I went back to the stock rom and now the phone won't come up. It loads the Vibrant screen then the T-Mobile screen finally the Galaxy S and then goes blank. Is it dead? I have tried flashing it back to the stock rom a few times and it looks like it is working. It does give a message that says it can't wipe the data though.
What should I do?

cyberpyr8 said:
I went back to the stock rom and now the phone won't come up. It loads the Vibrant screen then the T-Mobile screen finally the Galaxy S and then goes blank. Is it dead? I have tried flashing it back to the stock rom a few times and it looks like it is working. It does give a message that says it can't wipe the data though.
What should I do?
Click to expand...
Click to collapse
I'm assuming that you've got a decent charge on the phone (>65%) since you haven't been using it. You can get into download mode just fine right? What version of Odin are you running 1.0 or 1.3? Which stock JFD package did you download? This one has worked for me in the past.
~SB

I used the 1.3 Odin. I reinstalled the drivers from the package I found here forum.xda-developers.com/ showthread.php?t=803492
I can still get into download mode. I think the battery is above 65% still. I have had it hooked most of the afternoon.
I had also tried the download you linked to.

I just tried again with the files you posted and the same results. It keeps saying that it can't format the data / do the wipe.

cyberpyr8 said:
I just tried again with the files you posted and the same results. It keeps saying that it can't format the data / do the wipe.
Click to expand...
Click to collapse
Lemme look around the forums and see what I can find. This phone is pretty resistant to bricking. I'm sure there's a fix for this in one of the few million posts here.

Thanks! I can't wait 7 days for a replacement phone.

Try this thread and see if it works for you. Seems like some people were having the same issues.
~SB

I am at the Android System Recovery and it boots with the error like it is supposed to but I can't seem to get the command prompt step. It says to go to a command prompt and run ADB Reboot. Where do I find the A It looks like this DB command at?might work if I can get the phone to reboot.
Edit: I see it is in the SDK.

It's alive!! Thanks SB for all of your help. I have Froyo running. I will leave it there for now.
This site is a better source of help than any other. Thanks again.

cyberpyr8 said:
It's alive!! Thanks SB for all of your help. I have Froyo running. I will leave it there for now.
This site is a better source of help than any other. Thanks again.
Click to expand...
Click to collapse
Glad to help! The answer is always here....somewhere...
~SB
Sent from my SGH-T959 using XDA App

I ran into this as well all u have to do is a factory reset after Odin the ji6 update
Sent from my SGH-T959 using XDA App

I had this same problem.
cyberpyr8 said:
The application Superuser Permissions (process com.noshufou.android.su) has stopped unexpectedly. Please try again. And force close.
Click to expand...
Click to collapse
I corrected it by going to SETTINGS>APPLICATIONS>MANAGE APPLICATIONS>ALL>SUPERUSER PERMISSIONS>CLEAR DATA
Hope it works for you!

Related

[Q] Rooted Vibrant turning on and off

I just had my phone rooted on tuesday by a friend. It started turning itself off for the first few hours and went back to normal for a day. Last night it started turning itself on and off every minute. I know nothing about phones, can anyone help me?
How did your friend root?
Did they delete system apps?
Did they apply lag fixes?
Perhaps just flash a custom rom. Their better than stock and should fix your issue. I hope they didn't do a lag fix. Disable it if they did.
He did something like holding the power button/volume up/down to get into download mode? That's all i know. He said he didn't remove any of the system apps, or change anything. He added a wifi-tethering for me, that's why he rooted it. I know nothing about phones and computers. I'm out of town for another week so i can't have him fix it, but i need to do something so i can use my phone. Any suggestions?
oh ya, he used ODIN if i remember right
I don't know why he would be using Odin if all he was doing was rooting the phone. Can you get to the web to DL anything? I would try flashing something with clockwork till you can re-flash to stock with Odin. You need to find out what exactly your friend did when he worked on your phone.
Can you adb? I would like to see the log.
Sent from my Bionixed SGH-T959 using XDA App
my phone wont stay on long enough to do anything. When i push the power/up/down buttons at the same time i get a picture of a droid and it says power reset or unknown upload mode
whats adb? I'm a preschooler when it comes to anything computer/phone related
I was getting panic mode/upload when I was messing with eugenes kernals.
intruda119 said:
I was getting panic mode/upload when I was messing with eugenes kernals.
Click to expand...
Click to collapse
As was I, and that's the only time I've seen that screen.
OP, you're friend definitely did more than simply root your phone. Especially if you say he used Odin? There's no reason to use Odin to gain root.
I would recommend you Odin back to stock and start fresh.
is there any way i can do it without Odin? I'm out of town for a week and need my phone
Rom manager / clockworkmod. Just go to the app store (it's free) and download it. Flash the recovery and flash back to stock 2.1 eclair. It should fix it then when you get home just use the one click root method to root your phone. Check the vibrant bible in android dev. to do it, it's really easy to do yourself since it is literally, one click ^_^ Also for the rom of 2.1 I also recommend going to the vibrant bible for that as well. All you have to do is dl rom manager, put the 2.1 rom on the root of your sd (not external sd) then go into rom manager and install custom rom (pick the stock 2.1). It will wipe your data but your phone should be fixed and you can always dl back your apps and import contacts through your gmail account. Hope this helps.
http://forum.xda-developers.com/showthread.php?t=740077
that's eugene's stock 2.1 for vibrant flashable through clockworkmod ^_^

Problem while flashing please help!!!

Hi everyone, I decided to finally root and flash to axura today. I saw the one click vibrant root link today and did that one successfully. I did some searching and ended up with Austiclees instructional video.
My phone is currently rooted and after downloading Axura 2.0.6. I loaded it onto my internal sd. I downloaded the newest clockwork and when i click install from sd card it seems to be working. However, the screen just goes to android system recovery and I'm stuck having to choose between reboot now or reinstall packages. I'm very frustrated right now and was wondering how to get Axura to actually install..
BTW I did not root from one click lag fix.. I hope thats not the problem.. Any help would be appreciated PLEASE!!!
I just flashed onyx on my vibrant like a day ago.
When you have the rom on your phone you go to rom manager install clockwork i cant remember if you need to restart... after that you click reboot into recovery ...
wait for the prompt to come up and choose to reinstall packages the phone will reboot and open another prompt (you may have to repeat this step if you didn't get into clockwork recovery just click reinstall again.)
Once you are at clockwork recovery you choose install from sdcard and navigate to your rom.
Sent from my futuristic phone
chuckblock said:
Hi everyone, I decided to finally root and flash to axura today. I saw the one click vibrant root link today and did that one successfully. I did some searching and ended up with Austiclees instructional video.
My phone is currently rooted and after downloading Axura 2.0.6. I loaded it onto my internal sd. I downloaded the newest clockwork and when i click install from sd card it seems to be working. However, the screen just goes to android system recovery and I'm stuck having to choose between reboot now or reinstall packages. I'm very frustrated right now and was wondering how to get Axura to actually install..
BTW I did not root from one click lag fix.. I hope thats not the problem.. Any help would be appreciated PLEASE!!!
Click to expand...
Click to collapse
The way you rooted is not an issue.
Click reinstall packages that should take you into cw recovery. Sometimes you have to click twice. Once in Cw recovery scroll down to install zip from sd card, then click choose zip from sd card. After that click on your chosen rom, let it do it's thing and when it brings you back to Cw screen click reboot now. Then enjoy your new Rom.
thanks guys... i figured it out... for anyone with the same problem, I just clicked reinstall packages twice; which put me into clockwork recovery. And for anyone deciding if they want to root and flash or not, let me just say axura's rom on the vibrant is undescribably wonderful. I love not having to reboot when I go to gallery, wifi problems are non existant, as for gps, I haven't tried yet but will be most likely flawless.
thanks ironlood and icandy...
sigh, why didnt i do this before -_-
No prob .. I was actually thinking about flashing Axura in a week or so ... just watcheda video that showed absolutely no lag
Sent from my futuristic phone
For me and my setup, Axura has been the best, and I tried most. I don't think you even need Voodoo lag fix kernel, I just could not resist. Stick with plain Aura 2.2 for now. It's smooth like butter.
And welcome to flashing!
Vibrant Axura 2.2 Voodoo 5 JL5 via the XDA app
Zw
12paq said:
For me and my setup, Axura has been the best, and I tried most. I don't think you even need Voodoo lag fix kernel, I just could not resist. Stick with plain Aura 2.2 for now. It's smooth like butter.
And welcome to flashing!
Vibrant Axura 2.2 Voodoo 5 JL5 via the XDA app
Click to expand...
Click to collapse
Lol yeah now that I figured out how easy flashing is I want to try everything.
The only thing I need to do is figure out how to use Odin and im set.
Sent from my futuristic phone
Lol ironlood, i jist downloaded odin and im trying to figure out how to use it too...
Sent from my SGH-T959 using XDA App
chuckblock said:
Lol ironlood, i jist downloaded odin and im trying to figure out how to use it too...
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yeah I have read a few guides on Odin but the program itself is still hard for me to understand.
There needs to be a wiki or something that has a entire glossery for the program's terms.
Sent from my futuristic phone

dun bricked myself good this time..

borked up the fascinate whilst trying to update to the devs 2.2.
i know exactly what i did wrong. i was running voodoo5, and i clicked to disable lag fix, but i forgot to restart to let it *actually* disable before trying to load the new stuff. STUPID!
when that happened, it hung on samsung screen, then after battery pull all the phone will do is boot loop.. samsung screen, then goes to robot and screen says says "wiping cache, data, ect.." and then back to samsung screen to reboot and reboot.
i have literally 30 tabs open with articles from here and other forums, nothing seems to be working. here is what i have tried.
1. tried booting back to red cwm and playing with the lagfix (enable and disable again) to see if it would work, no go. i ended up losing red cwm - had to ODIN red back.. i cant get green to flash.
2. tried flashing DL09 both the full package and each individual part via ODIN
3. tried flashing the stocki500system.md5 (from the board) and kernel via ODIN, and nothing.. same boot loop. everything i have flashed via ODIN still gives me a boot loop..
4. tried to connect via ADB but it wont let me access the phone.. NOTE: i just downloaded ADB as a last resort and know nothing about it..
the only thing i can seem to do is get to red cwm. i have several backups in the restore section, but none of them seem to work - either i get a "no file found" even though i can see the file(s), or i get an error after it does load that says ".android_secure.img not found. skipping restore of /sdcard/.android_secure"
any ideas?
Okay follow these steps. Make sure you follow them step by step. Even though you have the lagfix installed this removed it for me.
http://forum.xda-developers.com/showthread.php?t=782204
Place the PIT file where it belongs. Then ODIN the system, kernel, and recovery in that order. Don't restart the process every time. Just ODIN them one after another.
thank you very much for taking a moment to answer. i did follow that thread, however
i managed to get the stocki500 recovery but the other files (recovery, PIT) are all 404 not found errors.
ive tried that stock md5 and it still boot loops. i actually have that tab open from when i tried that route..
any other ideas and thanks again
Thats why its not working. Try this restore by adrynalyne. The file is there and everything is in one. Just ODIN in the PDA section. This should work.
http://forum.xda-developers.com/showthread.php?t=867648
I got myself into a bit of pickle too. Kept getting errors on the new_cwm file. After numerous attempts. I figured out the file hadn't downloaded correctly and the archive was damaged. Folks who havent installed Froyo yet, do yourself a favor and check the files before you save it to your sd card.
BSayre18 said:
Thats why its not working. Try this restore by adrynalyne. The file is there and everything is in one. Just ODIN in the PDA section. This should work.
http://forum.xda-developers.com/showthread.php?t=867648
Click to expand...
Click to collapse
downloading now.. thanks for the point to this file.. i hadnt found that one yet
no problem. it should work out good.
mailaliasgar said:
I got myself into a bit of pickle too. Kept getting errors on the new_cwm file. After numerous attempts. I figured out the file hadn't downloaded correctly and the archive was damaged. Folks who havent installed Froyo yet, do yourself a favor and check the files before you save it to your sd card.
Click to expand...
Click to collapse
i soft bricked doing that with a corrupt file before.. however that time i was able to restore using my backup.
this time, every time i try a method, it kicks me back to boot loop. if the file that im downloading now doesnt work, i will have to try and figure out ADB as a last resort..
thanks much for the help!
BSayre18 said:
no problem. it should work out good.
Click to expand...
Click to collapse
problem
thank you for all your help
mrjake1970 said:
problem
thank you for all your help
Click to expand...
Click to collapse
So this worked for you? You just re-rooted as normal?
def
Thank you all for your help. i applied all the info i got here, and one of them worked it finally took the ODIN flash to stock and i recovered into FROYO from there.
seriously thank you all.. its great that the community is so supportive
I did the exact same thing a couple of days ago, and recovered a similar way, odin back to D101, flashed DL09 & superclean, then restored a backup, then disabled voodoo and finally flashed DL30. I've got a couple of questions.
1: Is voodoo completely off my phone or is it just disabled (is there a difference)? When I apply update.zip from the blue recovery I get green cwm.
2: Each time I backup, restore, flash a different rom I apply update.zip, then from green recovery I flash "new_cwm.zip". Is this necessary?
Joe T said:
I did the exact same thing a couple of days ago, and recovered a similar way, odin back to D101, flashed DL09 & superclean, then restored a backup, then disabled voodoo and finally flashed DL30. I've got a couple of questions.
1: Is voodoo completely off my phone or is it just disabled (is there a difference)? When I apply update.zip from the blue recovery I get green cwm.
2: Each time I backup, restore, flash a different rom I apply update.zip, then from green recovery I flash "new_cwm.zip". Is this necessary?
Click to expand...
Click to collapse
i followed all the hints i got, and i think that the one i got about formatting helped me get out of the boot loop from hell.. it finally took my flash from ODIN, it wouldn't until i did the format(s)..
mind you i am NOT an expert, however from what i read and talked about offline, voodoo is still resident on your phone but disabled (check to see if you have the voodoo file still on your card).. if DL30 is running fine, you are ok..
from what i have read, yes.. the new cwm is required in order to get it to mesh properly with 2.2 leak.. i havent had any issues and i loaded that as well.. from one of the posts i read, if you are a serial flasher, then you need to make sure that not only you download the new cwm zip, but also should have deleted the entire clockworkmod folder from your card for best results..
I love this threadd.... I did the same damn thingg...
Sent from my SCH-I500 using XDA App
You guys are not alone. I'm just glad the peeps that know what's going on have the patience to put up with us.
Sent from my SCH-I500 using XDA App
adrynalyne's di01 odin package covers a multitude of sins.
upsidedownaaron said:
adrynalyne's di01 odin package covers a multitude of sins.
Click to expand...
Click to collapse
It will literally bring any phone back from the dead as long as its a software issue. I recommend keeping the di01 package, samsung drivers and Odin 1.3 on your computer at all times...
Sent from my SCH-I500 using XDA App
godihatework said:
It will literally bring any phone back from the dead as long as its a software issue. I recommend keeping the di01 package, samsung drivers and Odin 1.3 on your computer at all times...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
ABSOLUTELY!! I have those on my computer at all times, adrynalynes d101 brought me back a few times.
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate

[Q] EVO Rom/Root problems

I am having some serious issues with my evo. I have tried 10 different methods, googled 100 different help guides and still no fix.
I had originally rooted my phone using simple root and put the "fixed" froyo rom on there. Everything worked fine, but I was outdated and having some really slow issues so I wanted to try a new rom...Fresh.
Well I tried a few methods, but I somehow reverted my evo back to a nonroot of the original OS. Whenever i go into hboot, my recovery does not work. I push the PC36img and load it, then restart then I attempt to go to my recovery where it gives me the error picture with the yellow/red triangle. I then select recovery (after pressing UP volume and powerbutton) and try to load update from sd card. Everytime I do that I get a Failed error.
I've tried to reroot using several methods off this website, I've done everything I can to get it working but can't. Any help would be GREATLY appreciated!
Try reflashing your recovery image.
BTW I have hboot 79.0 with S-ON, so it looks like I def became unrooted.
noweakness said:
BTW I have hboot 79.0 with S-ON, so it looks like I def became unrooted.
Click to expand...
Click to collapse
Not sure how it would have just unrooted itself. I would run an RUU from here: http://forum.xda-developers.com/showthread.php?t=884060
Then, I would re-root and start clean again.
Heaterz16 said:
Try reflashing your recovery image.
Click to expand...
Click to collapse
I have a recovery-ra.img, how do I tell it to flash it?
I pulled up this list of recovery files, is there a particular one I should use?
htt p://goo-inside.me/amon_ra/supersonic/
Heaterz16 said:
Not sure how it would have just unrooted itself. I would run an RUU from here: http://forum.xda-developers.com/showthread.php?t=884060
Then, I would re-root and start clean again.
Click to expand...
Click to collapse
Ok I downloaded the top item:
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed
Ran the exe, surprisingly picked up my phone and started the image update. My phone restarted and it forced closed the app on my computer. Now I have a new HTC logo for about 5 min on my phone not doing anything. Should I wait it out or restart my phone?
noweakness said:
Ok I downloaded the top item:
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed
Ran the exe, surprisingly picked up my phone and started the image update. My phone restarted and it forced closed the app on my computer. Now I have a new HTC logo for about 5 min on my phone not doing anything. Should I wait it out or restart my phone?
Click to expand...
Click to collapse
I would have waited about ten minutes then restarted the phone. If the phone is stuck at the HTC logo, then I would go ahead and re-run the RUU.
Let me know how it turns out.
Heaterz16 said:
I would have waited about ten minutes then restarted the phone. If the phone is stuck at the HTC logo, then I would go ahead and re-run the RUU.
Let me know how it turns out.
Click to expand...
Click to collapse
ok, finally got it working. Had to restart the phone manually and try it on a different computer. It updated it to the newer version of android and hboot, thank goodness! That was the easiest and most productive thing I've been able to do so far, thanks!
Well now I try to boot into recovery and get the same error:
can't open /cache/recovery/command
Then I get :
E: signature verification failed
Installation aborted
When i try to load update from sdcard
noweakness said:
ok, finally got it working. Had to restart the phone manually and try it on a different computer. It updated it to the newer version of android and hboot, thank goodness! That was the easiest and most productive thing I've been able to do so far, thanks!
Well now I try to boot into recovery and get the same error:
can't open /cache/recovery/command
Then I get :
E: signature verification failed
Installation aborted
When i try to load update from sdcard
Click to expand...
Click to collapse
Ok, so, I think you said you got the RUU working which would have completely restored the phone to unrooted and stock from factory.
Now, you need to re-root your phone using one of the methods on xda. I used the manual method here: http://forum.xda-developers.com/showthread.php?t=829045. However, many people have had success with the one-click methods.
After you re-root (which will likely included installing a recovery), select a rom you want to try, boot to recovery, wipe and flash it. A great starter ROM is MikFroyo 4.6 or 4.5.
Try downloading the PC36IMG.zip from here: http://forum.xda-developers.com/showthread.php?t=705026
put that on the root of your SD card, then boot into HBOOT and it should find that PC36IMG.zip after a few seconds and ask if you want to flash it. Choose yes and let it finish. Should then be able to reboot into recovery.
ok thanks, i'll try it when I get back home
jesuspgt said:
Try downloading the PC36IMG.zip from here: http://forum.xda-developers.com/showthread.php?t=705026
put that on the root of your SD card, then boot into HBOOT and it should find that PC36IMG.zip after a few seconds and ask if you want to flash it. Choose yes and let it finish. Should then be able to reboot into recovery.
Click to expand...
Click to collapse
Ok, I tried this method...the filesize of pc36img.zip is only 3.5mb, but it didn't seem to work. It scanned the file then just went back to the hboot screen with my options never asking to flash.
I'm going to try to reroot using the other method now...
So I clicked the link and he forwarded to the autoroot.bat page so I used his method. It worked well (the 2nd time around) all the way until it started to push amon_ra_1.8-mod.... then after that it says rebooting into the bootloader, and it reboots into it and just says waiting for phone...
It does appear that my phone is rooted now, but my recovery is still not working. If I use ROM manager will it work since my phone is rooted or do I need to have a rooted ROM to run it off of?
noweakness said:
So I clicked the link and he forwarded to the autoroot.bat page so I used his method. It worked well (the 2nd time around) all the way until it started to push amon_ra_1.8-mod.... then after that it says rebooting into the bootloader, and it reboots into it and just says waiting for phone...
It does appear that my phone is rooted now, but my recovery is still not working. If I use ROM manager will it work since my phone is rooted or do I need to have a rooted ROM to run it off of?
Click to expand...
Click to collapse
Does your phone show s-off while in the bootloader? If so you should be able to run the FlashZip script and use that to flash the pc36img-sprintlovers zip. That one contains everything needed to bring your phone up to date and will leave you with a rooted rom and recovery.
Sent from my PC36100 using XDA Premium App
xHausx said:
Does your phone show s-off while in the bootloader? If so you should be able to run the FlashZip script and use that to flash the pc36img-sprintlovers zip. That one contains everything needed to bring your phone up to date and will leave you with a rooted rom and recovery.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
FINALLY! Thanks a million! My recovery is now working and it installed the built in sprinter lovers rom, I guess the anti-virus was stopping it so I disabled it and ran the flash script. I was able to install Fresh on there, just to try it out. I do have a few questions though:
1. I noticed after going through many pages that to update to a newer ROM version you don't always have to wipe clean, you can just install (or flash) the new update? I noticed in Fresh there is a built in app that does that. Is this true for most ROMS or only certain ones?
2. I assume I am using the RA recovery. I noticed the backup/restore feature on there. What exactly does that backup and when should I use it?
3. I've noticed I've been very low with memory on my phone (not SD card), I have about 258MB free. How can I clear space and when I mount my phone what files are important to keep and can I get rid of, is it okay to get rid of my rom.zip's and radio.zip's?
Thanks again to everyone, autoroot was def the most painless root ever.
noweakness said:
FINALLY! Thanks a million! My recovery is now working and it installed the built in sprinter lovers rom, I guess the anti-virus was stopping it so I disabled it and ran the flash script. I was able to install Fresh on there, just to try it out. I do have a few questions though:
1. I noticed after going through many pages that to update to a newer ROM version you don't always have to wipe clean, you can just install (or flash) the new update? I noticed in Fresh there is a built in app that does that. Is this true for most ROMS or only certain ones?
2. I assume I am using the RA recovery. I noticed the backup/restore feature on there. What exactly does that backup and when should I use it?
3. I've noticed I've been very low with memory on my phone (not SD card), I have about 258MB free. How can I clear space and when I mount my phone what files are important to keep and can I get rid of, is it okay to get rid of my rom.zip's and radio.zip's?
Thanks again to everyone, autoroot was def the most painless root ever.
Click to expand...
Click to collapse
1) You'll want to always wipe your cache/dalvik (I do everytime I'm in the recovery) but the Data depends on the ROM. Usually if you are going from one sense rom to another you are ok and the same for AOSP to AOSP. Going from Sense to AOSP you'll need to wipe data though.
2) Autoroot comes with a modified version of AmonRA, they are mostly just speed tweaks. To make a complete backup of your ROM select Boot (kernel), System (ROM), Data (Apps & Settings) and .android (apps on SD card)
3) You can delete the zips from your sd card if you don't need them but that's about normal for free memory.

help(resolved)

Hey I just seriously screwed my self over bassicly I tried to get miui to boot from the samsung fascinate however when I installed it in cmr it spassed out then powered of then went to the bootloader and I get a red error message saying can't mount data or something so then I tried to reinstall Eco 3 Odin using Odin and it worked it booted but it says I have zero data on my phone and I can't install anything. I also tried the oneclick soft unbricker but it fails saying adb divers are not installed when they are. I'm doing this on my phones browser witch is the only thing that seems to be working right now I also tried a band restore but I got the same data error message.
Have you tried restoring to DL17 and then re-upgrading to 2.2?
And how about a good old odin flash?
In worst case, I would ask imnuts for the full odin package, or use a fascinate full odin package to get you off your feet, then reflash the modem, and recovery, then wipe In recovery cyan cwm... Then flash ec03
Sent from my SCH-I400 using XDA Premium App
wait wait, is this on a Continuum or Fascinate?
Nuckin said:
wait wait, is this on a Continuum or Fascinate?
Click to expand...
Click to collapse
He is on a Continuum, but you can use a fascinate Odin package to reformat partitions if they get messed up, then just reflash recovery and start fresh if you can get in then... That wasn't a really good thing though to suggest to a newcomer necessarily, so thank you for pointing that out
okay heres what happened firts i wanted to see if i could get the miui rom for the samsung fascinate to boot on the continuum there pretty much the same phone minus the ticker and screen size so i went into clockwork mod and wiped everything then went to install zip from sd card and clicked on the miui rom witch was the process we always used on the hero. then after i clicked on it, it started to install then my screen started shacking and my phone turned off. when i turned it back on it when to the bootloader and a red error message poped up saying
e:cant mount /dev/blockstill(invalid argument
and when i go to recovery it says the same thing when i try to wipe/restore nand it says the same thing. so at that point i powered off and went to download mode and reinstalled eco3 odin using pda mode on odin and it worked then it rebooted and i got to the set up screen and i got 2 force closes daily brefeing and something else i went ahead and skipped all that stuff and it loaded fine after that. however now for some reason it says i have zero system memory so i cant install any apps or save data however it does recognize my sd card but i cant install to sd card. so bassicly the phone functions just no internal memory. at this point i honestly dont know what to do everything on the hero was simple and straight forward and we never ran into these kind of problems. ive also tried to restore my nands and reinstall clockwork mod but still no dice. what i need to do now i guess is get the necessary files to go completely stock and see if that helps. and if someone could point me in the direction to those files i would really aprechiate it. oh and i tried the one click unbricker it sayed success but didnt really do anything.
oh and i know trying to install miui was stupid but i was just wanting to see if it would boot lol.
Download the PIT file in the Development forum, as well as the DL17 Odin package from the FAQ of the EC03 post I made. Flash the DL17 in PDA, with the PIT, and re-partition selected. After that, you should be back on DL17, and can do whatever you want from there.
huzzza!!!
thank god that worked thank yall so much i still cant believe that just happened but restoring the stock odin image worked and all is well. so i guess tommorow i can reroot and restore my nand.
once again thank yall for the help.

Categories

Resources