Applying a Different ROM - Vibrant General

Ok, so I have my Vibrant rooted but am still on the stock ROM. I want to try out a diff rom but I got a quick, stupid, question.
I use ROM Manager to backup my ROM now. I have the original backup of the stock ROM. When I apply a different ROM, can I just restore the backup and go back to stock via ROM Manager with no issues? I know you could on the myTouch, just want to make sure its the same way on the vibrant as when the official froyo gets released, I want to be able to flash the OTA.
Thanks

I don't see why you couldn't...

just be careful when trying out a froyo rom. nandroiding back to an eclair rom may cause issues because i don't think the nandroid flashes a kernel. so, and i could be wrong, you will need a standalone kernel to flash as well. you should be able to find the JI6 kernel pretty easily on this forum.
good luck and have fun!
edit: however, you can flash an eclair rom right over a froyo rom, because they usually contain a kernel. honestly, even tho i backup before every new rom i try, i hardly ever nandroid back to a previous rom.

Another good idea is to flash back to original Eclair ROM with Odin (as that gives you a nice fresh start) and then nandroid your backup.

Related

[Q] DL09 Quick Questions

Hey everyone! I hate to take up another thread but i like to be as sure as possible when it comes to messing with ODIN, since from what i understand that is where most people have likely bricked their phone.
Currently im running sonofskywalkers 2.3 rom i believe with DI01. I want to update to the newest one, which from what i understand means i need to upgrade to DL09.
My question is they say not to flash 01 stuff to over 09, so do i need to completely revert back to stock to push the new stuff since the rom i am running currently is for 01. Or am i safe to go ahead and update the radio and stuff, and boot up and get into rom manager to download the newest rom?
Thanks for your patience community and quick and helpful responses.
You are fine flashing over what you have, the issues mainly come up when you don't flash all the parts together (ROM, kernel, modem).
As far as Odin goes, as long as you use the PDA function, and not the PHONE function, you will be fine.
Edit: BTW, are you running a voodoo kernel? If so, that needs to be disabled before proceeding
For one, make sure voodoo is disabled if its on your kernal. If thats okay, then I would just odin this and then try to find a root method that would work. Or instead of rooting your stock, just flash a rooted rom onto your phone after the full odin.
BTW if you do want to keep stock, know that it can be a pain to get root to work. For some people it can be annoyingly hard, while others are able to use something simple such as the one click root. I was able to get one click to work, but it varies. If something goes wrong, you can always just re-odin the full package again.
I thought i might add here that you mentioned reading not to flash di01 stuff over dl09.
What that means is after you odin the dl09 upgrade you should no longer flash roms, kernels, themes and such that are not dl09. Flashing a di01 kernel would not work once you upgrade to dl09.
Hope this helps.
Have fun
Sent from my dl09 fascinate through xda app.

[Q] ROMS LAGFIX etc.

I have a few questions.
I understand there are official updates for our phones 2.1->2.2 but they are operator based. So there are customized roms, that are with custom stuff.
I'm really intereseted in upgrading from 2.1 official rom to a custom, but dont know exactly which one to choose.
I once flashed a 2.2 but it bricked my phone, so i had it repaired (the phone didnt respond to any key combinations or anything at all).
So is there any point to upgrade if there isnt any stable roms.
And also why is everyone waiting for the official update from samsung when there are already 2.2 roms for 5800.
Lagfix seems like a thing to try out, but i want to be sure which rom is the best and so that the basic stuff works.
Don't know about others, but my reason for not upgrading to unofficial/custom ROMs is that I don't want to risk my phone (even if that risk may be small..)..I also don't have time to backup data, reset phone, re-install app.s, do settings again etc. which might be needed in the flashing process.
Besides, from what I read in this forum, none of the ROMs seems to be satisfactory enough & ready for prime time. But frankly, I am losing my patience fast & may soon go for a custom ROM if official upgrade doesn't arrive by end of this month..damn Samsung for taking sooo long..
TekkenLaw said:
Don't know about others, but my reason for not upgrading to unofficial/custom ROMs is that I don't want to risk my phone (even if that risk may be small..)..I also don't have time to backup data, reset phone, re-install app.s, do settings again etc. which might be needed in the flashing process.
Besides, from what I read in this forum, none of the ROMs seems to be satisfactory enough & ready for prime time. But frankly, I am losing my patience fast & may soon go for a custom ROM if official upgrade doesn't arrive by end of this month..damn Samsung for taking sooo long..
Click to expand...
Click to collapse
Thanks for your reply, that's what i wanted to know. I was thinking the same thing that probably the custom roms arent stable enough and that the official update still aint available.
Why don't you use a stock 2.2 ROM like the JPF?
shuvabrata said:
Why don't you use a stock 2.2 ROM like the JPF?
Click to expand...
Click to collapse
is it safe and works fine just like the default 2.1 that we have in our phones?
Sure ^^ and you cant brick your phone if you dont flash your bootloader^^ jpf also works faster^^ i would recommend to flash a custom rom. Like lestatious one. Everything works well on it^^ have fun
Sent from my GT-I5800 using XDA App
just dont flash the bootloader and you can always reenter download mode.
backing up isn't that big of an issue, titanium backup backs up pretty much everything.
If you're planning on using titanium, just be aware that you should only restore non android apps when switching from eclair to froyo..i tried this and kept getting fc's. Just make backups of stuff in the individual apps like contacts etc, then restore them after you upgrade to froyo. Then make a full titanium backup of everything once you have your phone the way you want it. From then on you can just test any rom you like and always have a quick easy way of getting your stuff back. I recommend using astro to backup titanium so you can have a version to hand after flashing.
P.S. I use jfp ultra clean and it rocks my socks
Sent from my GT-I5800 using XDA App
Ok, i might try out the stock 2.2 rom... But what about lagfixes or are they even neccessary on 2.2?
Cause my current 2.1 stock rom is really laggy, i remove tasks to clean up memory but it's still kinda slow.
Well if you're flashing a stock rom I would definately suggest JPF because it's pretty stable. You don't necessarily need the lagfix though..I personally found it made things a bit strange with random hangs when closing applications. Oh yeah and don't forget to use the modded 3d gallery from SGS Tools (I use the "last" version). You should be able to install it via the "Upgrade stock apps" option. You can also use it to change your GPS pool to Europe if needed.
shr33kant said:
Well if you're flashing a stock rom I would definately suggest JPF because it's pretty stable. You don't necessarily need the lagfix though..I personally found it made things a bit strange with random hangs when closing applications. Oh yeah and don't forget to use the modded 3d gallery from SGS Tools (I use the "last" version). You should be able to install it via the "Upgrade stock apps" option. You can also use it to change your GPS pool to Europe if needed.
Click to expand...
Click to collapse
So the jpf rom isnt europe or just needs some configs like that? But is the stock rom the best option, i don't neccessarily need all those extra stuff like samsung apps and layar etc. Pauri mentioned lestatious rom, its on JPA, for example. Is each one one of those stock roms like an update with still some bugs on them or just converted from other phone updates?
I'm between that custom rom and the JPF stock right now..
Oh it's a european rom, it's just that the default gps pool is set to north america. I installed The modded 3d gallery as a work around for the battery drain bug that the stock gallery has in froyo. Jpf clean is what I'm using till theres a more stable lestat rom because I tried jp9, which was good, but the bloatware...oh my..
Sent from my GT-I5800 using XDA App
shr33kant said:
Oh it's a european rom, it's just that the default gps pool is set to north america. I installed The modded 3d gallery as a work around for the battery drain bug that the stock gallery has in froyo. Jpf clean is what I'm using till theres a more stable lestat rom because I tried jp9, which was good, but the bloatware...oh my..
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
i guess i'll take your word for it and try out the JPF
i flashed the JPF and so far so good. It's atleast twice as fast as the stock 2.1 i had. Thanks you all for help
one more question, how do i root froyo 2.2 ?
i tried the one click method, after the command running it said everything is fine you're rooted. In recovery mode i tried to install update.zip but it didnt work.
havent see any alternatives for 2.2
can anyone help?

AOSP Questions

Bear with me guys......haven't posted much on here, more of a lurker.
I have been following the AOSP Rom for the Fascinate for the last two weeks and now with the MMS working I would love to give it a shot. I have a couple of questions before I get started.
I am currently running ComRom 2.1 with the PBJ-50 Kernel. No themes or anything like that.
1. Is it safe to just do a data wipe and factory reset then just install the Rom over top of what I have?
2. Is there a Kernel and a Modem with the ROM?
3. Anything special I need to know if I decide to go back to another Rom (from what I have read just ODIN back to stock and Rom away)?
Sorry if these have been answered already.....I searched and did not find my answers. Thank you for your time.
millwood said:
Bear with me guys......haven't posted much on here, more of a lurker.
I have been following the AOSP Rom for the Fascinate for the last two weeks and now with the MMS working I would love to give it a shot. I have a couple of questions before I get started.
I am currently running ComRom 2.1 with the PBJ-50 Kernel. No themes or anything like that.
1. Is it safe to just do a data wipe and factory reset then just install the Rom over top of what I have?
2. Is there a Kernel and a Modem with the ROM?
3. Anything special I need to know if I decide to go back to another Rom (from what I have read just ODIN back to stock and Rom away)?
Sorry if these have been answered already.....I searched and did not find my answers. Thank you for your time.
Click to expand...
Click to collapse
1. I couldn't answer this with certainty as I haven't flashed it myself and haven't yet dug through the CM7 thread in development to put together correct steps
2. yes there is, but you can flash a custom kernel like OTB or the gingerbread leaks' (ec09) modem as I've seen these work though not for everyone
3. as far as I know all you need to do to go back is just odin back to eclair/froyo with the 2.2 atlas pit file and proceed from there
don't have any experience with CM7 other than what I've read so someone who's done it could probably shed more light on this
tapatalked from my GINGERBANGED Fascinate
I just flashed cm7 today...
1. Data wipe, cache and factory reset should be enough. You need to download and install the 7/04 build, let it boot up and reboot back into recovery and then install the 7/13 build and then the gapps. There is also a modified cwm that you can flash to your phone that's been edited for cm7 not everyone uses it but I did and it works perfectly.
2. There is a kernel included but alot of people have better audio quality with one of the otb kernels.
There isn't a modem. But it seems like most of the newer modems are fine so your current one with comrom is probably good.
3. To do back to stock youll have to use a full odin package. But you probably won't want to anyway.
Sent from my SCH-I500 using XDA Premium App
Thank you for the answers. Now I am more comfortable. Thanks.
Not sure how important it is, but I would wipe cache and dalvik as well. I used ED04 modem for a while, and switched to EC09 modem after everyone seemed to recommend it for the MTD roms. TBH, I havent noticed much difference between the 2 radios, they both worked well for me. As far as flashing back to a TW rom, check the sticky in the dev section:
http://forum.xda-developers.com/showthread.php?t=1124391
I am already running the EC09 modem. Have been for about a week or so. I watched as others have had good luck with it so I made the jump. I probably will stick with the EC09 as it seems to work fine with AOSP MIUI Rom that I want to try. I tried the EC09 on my wife's fascinate and it ran like crap.....kind of funny how two different build dates run to differently.

Deck rom

Dose any one know where to get the stock kernel for deck rom. I am currently on tiamatone but its too glitchy and szen kernel has, long wake response. I yhink because i update to 1.3b
You can simply re-flash the rom over the current rom, no need to wipe.
Thanks but i done it twice today... I been reading that the original kernel that came in rom works the best i don't have the file nor made a backup
Wont i lose my data like that?
Pretty sure it's in kernel manager lite. Its just the cyanogen mod kernel.

[Q] Help With JB Energy™ Rom

Just recently flashed a friend's phone with Energy Rom. The rom looks amazing and is very well designed. There are just a few issues that he is having and I have not seen anyone else experience these problems in the tread. (Too few posts to post there)
Her camera is not working and I guess her Hotspot gave her a "timed out" message. . . . If anyone else has experienced this, please let me know if you were able to resolve this and how.
Thanks!
marcusw3 said:
Just recently flashed a friend's phone with Energy Rom. The rom looks amazing and is very well designed. There are just a few issues that he is having and I have not seen anyone else experience these problems in the tread. (Too few posts to post there)
Her camera is not working and I guess her Hotspot gave her a "timed out" message. . . . If anyone else has experienced this, please let me know if you were able to resolve this and how.
Thanks!
Click to expand...
Click to collapse
Are you on the 4.1.2 update? If so you will need to flash back down to 4.1.1 kernel because the new kernel is not compatible with the 4.1.1 camera
Sent from my XT907 using Tapatalk 2
marcusw3 said:
Just recently flashed a friend's phone with Energy Rom. The rom looks amazing and is very well designed. There are just a few issues that he is having and I have not seen anyone else experience these problems in the tread. (Too few posts to post there)
Her camera is not working and I guess her Hotspot gave her a "timed out" message. . . . If anyone else has experienced this, please let me know if you were able to resolve this and how.
Thanks!
Click to expand...
Click to collapse
Energy ROM is based off of the the 4.1.1 build, the latest update has the XT907 at 4.1.2. So if her phone was previously on 4.1.2, then flashing this ROM could cause problems as the previous poster mentioned due to the new kernel. Not sure if the developer will update his ROM any time soon (which I loved by the way, and keep checking his thread for any updates),
also, Energy ROM can only be installed via SS right now, and given that the bootloader has been unlocked, I believe that all ROMs will be flashable via TWRP/CWM going forward - thus making SS obsolete for the XT907.
Here's what I suggest though:
unlock bootloader
install TWRP recovery
try out the DeadRage ROM, which is based on the 4.1.2 build: http://www.droidrzr.com/index.php/topic/17778-romretail-deadrage-v12a-05092013-412-base/
if you really want to stick with Energy ROM with working camera, then you still can:
flash back to stock (4.1.1)
root
install SS
unlock bootloader
install TWRP
install Energy ROM on Slot 1
backup Energy ROM via SS
move Energy ROM to stock slot via SS
backup Energy ROM via TWRP (basically making a nandroid, and this can be installed going forward as a backup)
uninstall SS
Thanks!
jco23 said:
Energy ROM is based off of the the 4.1.1 build, the latest update has the XT907 at 4.1.2. So if her phone was previously on 4.1.2, then flashing this ROM could cause problems as the previous poster mentioned due to the new kernel. Not sure if the developer will update his ROM any time soon (which I loved by the way, and keep checking his thread for any updates),
also, Energy ROM can only be installed via SS right now, and given that the bootloader has been unlocked, I believe that all ROMs will be flashable via TWRP/CWM going forward - thus making SS obsolete for the XT907.
Here's what I suggest though:
unlock bootloader
install TWRP recovery
try out the DeadRage ROM, which is based on the 4.1.2 build:
if you really want to stick with Energy ROM with working camera, then you still can:
flash back to stock (4.1.1)
root
install SS
unlock bootloader
install TWRP
install Energy ROM on Slot 1
backup Energy ROM via SS
move Energy ROM to stock slot via SS
backup Energy ROM via TWRP (basically making a nandroid, and this can be installed going forward as a backup)
uninstall SS
Click to expand...
Click to collapse
I will give the first suggestion a reply, if that does not work, the second. I will keep you all posted on results. Thank you!
Kernel?
Any clue of where I can find just the kernel I need to download and flash?
Sorry for coming across as a newbie, but I am used to other phones that have a bit larger of a community. Thanks again.
marcusw3 said:
Any clue of where I can find just the kernel I need to download and flash?
Sorry for coming across as a newbie, but I am used to other phones that have a bit larger of a community. Thanks again.
Click to expand...
Click to collapse
no worries - we all were newbies at some point in time.
I have not seen a thread dedicated to the stock 4.1.1 kernel, but I did find this:
http://forum.xda-developers.com/showthread.php?t=2017200
my advice at this point is to backup your apps/data via TiBu (and then copy that backup folder to your mnt/external1 directory).
so that way, after you pick your ROM, you can re-download your apps from the market (I always recommend doing this as opposed to letting TiBu restore them), then you can use TiBu to restore data ONLY from your apps. I do NOT recommend restore system data though when switching ROMs (however, I do restore WiFi settings and bluetooth pairings).
hope this helps.
All worked out great! I appreciate the help. I ended going with Energy 4.1.1 I have that stupid grateful dead image stuck on first power up due to rage. -Annoying!!
marcusw3 said:
All worked out great! I appreciate the help. I ended going with Energy 4.1.1 I have that stupid grateful dead image stuck on first power up due to rage. -Annoying!!
Click to expand...
Click to collapse
anytime - see this thread regarding the boot logo:
http://www.droidrzr.com/index.php/topic/17708-boot-logos-request-for-custom-one-here/

Categories

Resources