Here is the story. I've got my Vibrant as a replacement for my older one two weeks ago. The old one had a problem with Home button responsiveness and at the end I decided to go with replacement. After some testing with identical firmware (freshly flashed) on both phones I found that the the new one boots much faster - around 12 sec difference (the time my audio widget is fully loaded) and overall I was very happy, until today when my phone screen turn of during some work on the browser. The buttons light was on and the screen became black.
1. I did battery pool. First boot was very slow. Force close for some koush process ( probably clockworkmod) came out .
2. I did 'wipe cache' - multiple force close after that
3. Factory reset - it was somewhat booting very slow and I decided to go with Odin.
I was able to put the phone in downloading mode and flash JFD with repartitioning. Everything looked ok during the process, but after reboot it plays Tmobile animation, startup sound, shows the letter S and stucks there.
I am able to get in stock 2e recovery. If I choose reinstall packages it goes to clockworkmod recovery (I thought clockworkrecovery should disappear after flashing with odin, but it is there) I tried flashing different usb ports - no difference.
The phone was with stock JI6 firmware, rooted with OCLF, ROM Manager with clockworkmod installed. Was working fine till today. I didn't experience any lag issues and neither of the lag fixes were installed or tested.
I played with clockworkmod recovery options format: system, data, sdcard.
I was not able to format boot - some error.
I am not a very good writer... sorry if somebody gets upset.
I will appreciate any help or idea.
Thanks
Fix for your problem
Sounds like some of the rom is either corrupted or the factory reset did not have J i-6 in it.......not enough info. Personal message me and i ll help you fix this problem.
Related
I finally decided to attempt to load a custom ROM on my Samsung Fascinate after a couple of months of owning it. Before I started anything, I backed up my current ROM twice using ROM Manager, then used ROM Manager to do the new ROM download and install.
Things didn't go well. At all.
Once the new ROM was installed, my phone restarted, got back to the puzzle screen (thinking I was in business!) and as soon as I unlocked the screen the force closes just kept on coming. One right after another. Pretty much anything and everything force closes, so much so that it is the only thing you can do on the phone now. I have tried force closing things for as much as 5 minutes thinking I might get to the end of it, but no luck.
So now I have 2 backups on my SD card. I went into my Android System Recovery (+, - volume and power button), selected apply sdcard:update.zip which gets me to ClockworkMod Recovery v. 2.5.1.0. From there I go into Backup and Restore, select Restore and then my restore file. After some time the restore process is complete and the phone asks to reboot. I do the reboot and low and behold nothing seems to have changed in the phone. I still have the custom ROM with all of the force closes.
Am I missing something with this CWM restore process? I have read what seems like dozens of forum entries and nobody else seems to have problems with the restoration.It seems like it is pretty straight forward but I am not having any luck with it at all.
Any help is appreciated!
Try This and see if it helps:
http://forum.androidcentral.com/fascinate-roms-hacks/38029-how-escape-force-close-loop-hell.html
Perfect! I am back in business thanks to you. Sure appreciate your help!
Did you wipe first?
Hi all,
I'm having a little problem. I have researched but everything I've found leads me back to square one...
So I followed this guide to installing CM7 on my M2. Please note that I have in the past successfully rooted my phone, installed the Argenstone ROM and one other basic Great Britain Rom. So I'm not a total nub. However at this stage I have a phone that's is useless to me...
My phone is rooted. I have Droid2Bootstapper installed and I managed to get the CWM 3.X installed. I downloaded the all-in-one.zip file from the CM7 ROM thread (the zip is actually called EndlessCM7-110901-nightly_build.zip - hope that's not an issue?)
I booted into CWM and applied the EndlessCM7-110901-nightly_build.zip and after (without a reboot) wiped everything (I had backed it up previously).
I rebooted the phone and...well I get the Google logo with the Motorola M and the Cyanogen bot as the 2 'O' characters. Then after a while a 3D rotating 'square' and the android writing and logo 'shimmering' in and out but that just goes on forever. I left it for an hour at one point and just gave up.
Now I can't even get past the Google logo. I've tried restoring my previous back up but that won't work either. I can't boot into the OS to actually use RSD lite to flash a known working ROM over the top.
When the LED turns blue and I hit the volume key it displays "Android BootMenu <v1.0.3>" which is different to the CWM 3.X that I was getting prior to applying the EndlessCM7-110901-nightly_build.zip file.
From here I can select to recover the last 'latest recovery' which when done loads into CWM-based Recovery v4.0.1.6-defy.
Basically I'm at this point where I seem to be able to load just about every boot menu under the sun and do everything but actually launch the damn OS.
How can I get out of this hole? Preferably I'd like to get everything back to the stock ROM the phone came with so that I can start from scratch again.
Any bodies help would be more than appreciated.
Cheers,
- Matt
EDIT: I have even used CWM 4.X+ to try and restore the Argenstone ROM. it goes through the whole process of checking the MD5 sums, restoring the system and boot images etc and seems to work without any issues. I then wipe all data and reboot. Nothing - still the same cyanogen Google logo and the only thing I can do is boot into all the CWM menus.
*sigh*
Argh feel like a true idiot now. It took me about an hour of searching earlier but I've only just found/remembered how to get RSD lite to see my phone (pwr+volume+camera) and I'm wiping the whole thing to the factory (vodafone) ROM. Might take the opportunity to take it to Vodafone and tell them it never gets a damn 3G connection lol...provided this flash works (touch wood).
Hi everyone I just recently purchased a used S4 the GT-i9500. Everything seemed fine until I got home. It detected my T-Mobile Sim fine but I could only access 2G data and could not connect to any WiFi network I came across. The rom was stock 4.2.2 and the phone was rooted pre purchase. So after fiddling around for a few minutes I discovered the previous owner had flashed TWRP v2.4.1.0 as his choice for a Custom Recovery. Now at this point I had decided to flash on a Custom Rom and of course I first made a backup before flashing on WanamLite. Now after attempting to flash it I immediately received a failure. I tried turning off the signature verification and it did not flash. Now in my frustration i attempted to wipe everything and tried flashing Omega Rom v14. Now i was able to go through with the installation and choose what I wished to install and when I pressed Install things went along smoothly until I hit the app SecSafetyAssurance.apk where it freezes. This is a bump that I've run into at least 5 times already. I changed certain options I wanted to install and eventually made it past this and I am prompted to reboot. Now when I do this to my dismay I just receive a black screen. Upon pulling out the battery and attempting to reboot I still receive a black screen. when I boot back into the Recovery and attempt to reboot the system from within TWRP it warns me saying No OS Installed Are you sure you want to reboot. Im at a loss of what to do. I have read about other members suggesting to use ODIN but I am very confused about how to access Download Mode in order to flash a stock rom from SamMobile.com. I could use a few tips or maybe a few options that I'm left with in order to obtain the operation of my phone again. I would like to get my phone back and Im sure some users can relate to how Im feeling so any help at all would be greatly appreciated. Thank you very much in advanced!
JmastahJay56 said:
Hi everyone I just recently purchased a used S4 the GT-i9500. Everything seemed fine until I got home. It detected my T-Mobile Sim fine but I could only access 2G data and could not connect to any WiFi network I came across. The rom was stock 4.2.2 and the phone was rooted pre purchase. So after fiddling around for a few minutes I discovered the previous owner had flashed TWRP v2.4.1.0 as his choice for a Custom Recovery. Now at this point I had decided to flash on a Custom Rom and of course I first made a backup before flashing on WanamLite. Now after attempting to flash it I immediately received a failure. I tried turning off the signature verification and it did not flash. Now in my frustration i attempted to wipe everything and tried flashing Omega Rom v14. Now i was able to go through with the installation and choose what I wished to install and when I pressed Install things went along smoothly until I hit the app SecSafetyAssurance.apk where it freezes. This is a bump that I've run into at least 5 times already. I changed certain options I wanted to install and eventually made it past this and I am prompted to reboot. Now when I do this to my dismay I just receive a black screen. Upon pulling out the battery and attempting to reboot I still receive a black screen. when I boot back into the Recovery and attempt to reboot the system from within TWRP it warns me saying No OS Installed Are you sure you want to reboot. Im at a loss of what to do. I have read about other members suggesting to use ODIN but I am very confused about how to access Download Mode in order to flash a stock rom from SamMobile.com. I could use a few tips or maybe a few options that I'm left with in order to obtain the operation of my phone again. I would like to get my phone back and Im sure some users can relate to how Im feeling so any help at all would be greatly appreciated. Thank you very much in advanced!
Click to expand...
Click to collapse
Well first thing is get the latest stock firmware for your variant from my sign and get odin 3.07
For download mode power off phone unplug,, press volume down home and power all together till something pops up and release then press volume up and connect to pc
Open odin click pda and select that firmware u downloaded start the process
For more info check my sign help thread link it has more options on the same
.
JmastahJay56 said:
Hi everyone I just recently purchased a used S4 the GT-i9500. Everything seemed fine until I got home. It detected my T-Mobile Sim fine but I could only access 2G data and could not connect to any WiFi network I came across. The rom was stock 4.2.2 and the phone was rooted pre purchase. So after fiddling around for a few minutes I discovered the previous owner had flashed TWRP v2.4.1.0 as his choice for a Custom Recovery. Now at this point I had decided to flash on a Custom Rom and of course I first made a backup before flashing on WanamLite. Now after attempting to flash it I immediately received a failure. I tried turning off the signature verification and it did not flash. Now in my frustration i attempted to wipe everything and tried flashing Omega Rom v14. Now i was able to go through with the installation and choose what I wished to install and when I pressed Install things went along smoothly until I hit the app SecSafetyAssurance.apk where it freezes. This is a bump that I've run into at least 5 times already. I changed certain options I wanted to install and eventually made it past this and I am prompted to reboot. Now when I do this to my dismay I just receive a black screen. Upon pulling out the battery and attempting to reboot I still receive a black screen. when I boot back into the Recovery and attempt to reboot the system from within TWRP it warns me saying No OS Installed Are you sure you want to reboot. Im at a loss of what to do. I have read about other members suggesting to use ODIN but I am very confused about how to access Download Mode in order to flash a stock rom from SamMobile.com. I could use a few tips or maybe a few options that I'm left with in order to obtain the operation of my phone again. I would like to get my phone back and Im sure some users can relate to how Im feeling so any help at all would be greatly appreciated. Thank you very much in advanced!
Click to expand...
Click to collapse
Flashing through odin is one option.... some users have reported that there were some hiccups when installing omega 14 because of the aroma script.....try a different rom...there are many others to choose from....or you could flash stock via odin as said on the earlier comment good luck
Feedback
Today I attempted to use ODIN to flash now I am still currently attempting this. When I press the volume down key, power, and home button it takes me to the custom recovery TWRP instead of download mode. The phone did this when I first purchased it. When I still had what appeared to be the stock rom it would always take me to the recovery. When I would use the volume up instead of down it would take me to the factory test mode now mind you this happened when the OS was still installed. When i try that combination now i just receive a blank black screen. Are there any other ways to boot into download mode?
So I've been having this strange issue for a year now, where I want to upgrade my SM-T530 (Tab4 10.1 wifi) to the stock Lolipop (5.0.whatever) ROM in order to get the damn kernel updated so I can access all these wonderful custom ROMs (Stuck on CM 12 atm...).
But whenever I flash a stock ROM for my model, it seems to freeze the screen after the boatloader. As in, everything seems to be working, sound and touchscreen, it just doesn't update/refresh the screen. Basically, the same behaviour as described in this post.
So here's the steps I took, in the hope that anyone can point me in the right direction:
Boot tablet in recovery (TWRP 3.0.1, in this case) and wipe Dalvik, /data, /cache, /system, basically everything)
Reboot tablet into bootloader/download mode
Using Odin 3.11.1, flash T530XXU1BOL2_T530PHN1BOE1_HOME.tar.md5 (Found here, which should be the correct ROM for my model (Bought in the Netherlands, but I have no idea where you folks are pulling this T530XX stuff from, it's nowhere to be found on the back))
Reboot tablet
After the 4th step, the tablet will be unresponsive for ~10 minutes (I think it's doing the whole "upgrading apps" thing that follows a new installation). After that, when I hit a certain area of the screen, I can hear the regular Android touchresponse, raising the volume also give the normal beeps and pushing the power button plays the "turning off screen" sound, but the screen stays active, showing the Samsung Galaxy Tab4 boot logo.
Soooo... Anyone care to take a guess what I'm doing wrong?
Personally, I think it might have to do with flashing the incorrect stock ROM, but for the life of me, I can't find out which T530-code I have. I've been flashing different ROMs, but no luck so far...
As for troubleshooting I've already tried:
The above procedure, afterwards flashed TWRP via Odin and flashed a custom ROM via TWRP. Same effect.
Variations of the above procedure, where I keep wiping the tablet after each step
Different custom ROMs
Ugh, nevermind.
Turns out I have an UK tablet (BTU-T530XXU1BOG2). After flashing a dozen or so ROMs, this one did the trick.
Oh well, problem solved :good:
I restarted my S4 this evening and now it won't boot past the SAMSUNG logo. I have tried a variety of things to get it going but none have worked.
1) Soft boot
2) Pulled battery and let it sit awhile
3) Tried to boot into Safe Mode (stuck on the same spot with no indication of going into safe mode)
4) Wipe cache from CWM recovery mode
5) Reboot from CWM recovery mode
Everything is pretty well backed up but after looking at my sdcard it appears that my camera reverted to internal memory about a month ago so I am after any ideas to get those images.
My phone is rooted and running an old 4.2.2 stock Android OS with USB debugging enabled. I was wondering if by re-flashing the OS it might fix the boot issue and be able to recover the images. Or maybe even flash CM. Or maybe some other thing. I found something about adb but I don't want to do anything else yet until someone more savvy than me weighs in.
Unless it's a hardware issue, then flashing a ROM might work.
The other option is to try a reflow. Reflow means heating your phone up so that the solder becomes liquid and any cracks in the solder (which can cause a bad contact), or any piece that isn't seated right, will be remedied.
did u tried to flash stock firmware using odin?
Deleted
I got it going. I first spent a number of hours getting to know adb which was a dead end because I couldn't get it to see beyond the base directory. I then just flashed the stock rom and everything was there including things that shouldn't be like apps, contacts and texts. The phone is back exactly where it was before it boot locked without having to mess with a single thing. I am grateful but a bit confused.