All codes for the Samsung Galaxy S I9000
So, here are all the (secret) codes ;
*2767*3855# Master Reset ! Totale reset naar fabrieksinstelling zonder bevesiging dus een full e-prom reset, verwijdert tevens de SP-Lock, Reset dus de hele telefoon, alle gegevens gaan hierbij verloren zodra de laatste “#”is ingetoetst ! Het verwijderd dus de interne memory en installeerd opnieuw de Firmware in de telefoon.
*#232337# geeft het Bluetoot Device Adress
*#232331# Bluetooth RF Test
*#232338# Shows WiFi MAC address
*#232339# WLAN Test menu, use “menu”button to start various tests
TX test RX test Status
*#1575# GPS Test menu / GPS Control
Display CP Status Change CP Status
*#6984125*# Admin Menu Service Mode
*#7465625# Check the PhoneLock status , netwerk vergrendeling
subnet vergrendeling
SP-blokkering
CP-blokkering
*#197328640# Sevice Menu 1. Debug screen 2. Version Info
3. UMTS RF NV 4. GSM RF NV
5. Audio 6. Common
*#0842# Vibration Test menu
*#0289# or *#0673# Melody Test menu
#7465626*28746# Auto Sim Lock deactivated
*#0782# Shows the Real Time Clock PDA RTC Get
*#0673# MP3 Melody Test menu
*#*#8255#*#* Lounch the Gtalk Service Monitor
*#1234# Firmware Version Information PDA and Phone
*#1111# Firmware Version Service Mode FTA SW Version
*#2222# Firmware Version Service Mode FTA HW Version
*#0283# Factory Test Service Mode
1 . Handset PCM Loopback 2 . Headset PCM Loopback
3 . Speaker PCM Loopback 4 . Handset Packet Loopback
5 . Headset Packet Loopback 6 . Speaker Packet Loopback
7 . Loopback Off
*#2663# Touch Screen Version ( Firmware version ) TSP FW Update /
Touch key FW Update
*#*#2663#*#* Factory Touch Screen Test ( raak het scherm aan om te tekenen )
*#*#0588#*#* Factory Proximity Sensor Test Mode
*#*#3264#*#* Factory Ram version
*#*#4636#*#* Factory Information Service Menu
- Telefooninformatie ( div. settings aanpassen )
- Accu-informatie ( niveau , schaal , accustaat, temp, voltage )
- Accu geschiedenis
- Gebruikers statistieken
- WiFi information ( WiFi API, Config, Status)
*#*#8255#*#* GTalk Service Monitor ( Time, User Idle, connection, Heartbeat, connection history, Transmission Statistics , Send Heartbeat to server)
*#*#7780#*#* Factory Data Reset ! Be Carefull !!!!!!
It will remove following items ;
- Google account settings
- System en Application data settings
- Alle downloads
It will NOT remove ;
- Current system and bundled applications
- SD card files e.g. photos, music files, etc.
*#*#34971539#*#* Factory Camara Firmware
- Phone/CAM FW Ver Check
- Phone to CAM FW Write
- ISP Ver Check
- FW Write Count
- CAM FW Cal Check
- CAM to Phone FW Dump
*#*#7594#*#* Change the “Power “ button action in youre phone, if you long press the button, it shows a screen asking you to select any option from Silent Mode/Air-plane Mode/ Power-Off. You can change this action using this code. You can enable direct Power-off by this code.
*#06# IMEI nummer weergave
*#03# NAND Flash uniek nummer weergave
*#0*# Testing Mode ( diverse tests , geluid/screen/cam/speaker/magnetic etc)
*#0011# Service Mode Phone info, power info verborgen menu
*#*#1472365#*#* GPS test menu
*#7465625# Engenering Mode Personalization Status
- Netwerkvergrendeling
- Vergrendeling netwerksubnet
- SP-blokkering
- CP-blokkering
*#3214789650# GPS Service menu voor JP3 Lbs Test Mode
- Get Position Test
- Application Settings
- SUPL/CP Settings
- Test Application
- Delete GPS Data
*#9900# SysDump Screen ( om RAM gegevens en andere LOG’s te dumpen op SD Card.
- Uitvoeren RIL Log
- Duidelijker RIL Log
- Copy to SD Card
- Disable Fast Dormancy
- Ramdump Mode Disabled / LOW
*#273283*255*663282*# Opent een File-Copy Scherm waarmee U diverse BackUp’s kunt maken van Uw bestanden
*#273283*255*3282*# Opent een Data Create menu
- SMS Fill up
- MMS Fill up
- Phonebook
- ETC
- Call Log
*#12580*369# Version Menu
- PDA nummer
- Phone nummer
- H/W version
- RFCallDate
- CSC nummer
*#0228# ADC Battery Status
*#32489# Service mode Ciphering Info
1 Ciphering info
2 Integrity Control
3 SIM Class Control
4 Revision Control
5 RCC(HSPA) Control
*#44336# Software Internal Version Info
- PDA Version
- Phone Version
- CSC Version
- Build Time
- Changelist nummer
*#2263# Service Mode RF Band Selection
1 Automatic
2 WCDMA Band
3 GSM Band
4 Combi Bands
*#9090# Service Mode Diagnostic Configuration
1 Log via USB
2 Log via UART
3 Log via IPC
4 Speed 115200
5 Speed 921600
6 DBG MSG ON
7 DBG MSG OFF
8 RAMDUMP ON
9 RAMDUMP OFF
*#7284# Phone Util USB I2C Mode Control
UART - control
USB - control
*#872564# USB Logging (DM) Control
Function enable/disable
Type CP only/AP only/CP+AP
*#4238378# Sevice Mode GCF Setting
1 GSM/(E)GPRS/WCDMA REL6
2 REL5
3 SETTING CANCELLATION
*#1575# Service Menu GPS Control Menu
1 Display CP Status
2 Change CP Status
*#3214789650# LBS Test Mode
- Get Position Test
- Application Settings
- SUPL/CP Settings
- Test Application
- Delete GPS Data
*#745# Sec RIL Dump menu
- Dpram Dump
- Rennen RIL Log
- Bekijken RIL Log
- Helder RIL Log
- Run IPC Dump Log
- View IPC Dump
- Save IPC Bin
- Copy to SD Card
- MMS Transaction Log On
- MMS Transaction Log Off
- MMS UA change
- NV Backup
- Delete Backup NV
*# 746# SVC Debug Dump menu
- Dump All
- Dump MSG
- Dump CP Log
- Dump CP Log2
- Dump Ramdump
- String Loopback
- String MSG
- String Log1
- String Log2
- String Disable
*#2663# Touch Screen Firmware Version
- TSP FW Update
- Touch key FW Update
*#0589# Light Sensor Test Mode
*#0588# Proximity Sensor Test Mode
*#3282*727336*# Data Usage Status
*#526# WLAN Engenering Test Mode
*#528# WLAN Engenering Test Mode
*#7412365# Camara Firmware Menu
- Phone/CAM FW Ver Check
- Phone FW Ver Check
- Phone to CAM FW Write
*#80# Another Touch Screen Test
*#07# Test History
*#3214789# GCF Mode Status
*#272886# Auto Answer Selection ( Answere without device )
*#8736364# Device management OTA Update Menu
- Software Update
- Setting
- Result
*#301279# Service Mode menu ; HSDPA/HSUPA Control Menu
- Display HSPA Info
- Change HSPA Revision
*#7353# Quick Test Menu
1 Melody
2 Vibration
3 Speaker
4 Dimming
5 Camera
6 VT Camera
7 Bluetooth
8 TSP Dot Mode
9 TSP Grid Mode
10 Accelerometer Sensor
11 Proximity Sensor
12 Light Sensor
*2767*4387264636# Service Mode Sellout SMS
1 Sellout SMS
2 Pcode
3 Mode
*7465625*638*# Configure Network Lock MCC/MNC
netwerkblokering , controlesleutel , Uitzetten
#7465625*638*# Insert Network Lock keycode
*7465625*782*# Configure Netwerk Lock NSP
#7465625*782*# Insert Partitial Network Lock keycode
*7465625*77*# Insert Netwerk Lock Keycode SP
#7465625*77*# Insert Operator Lock keycode
*7465625*27*# Insert Network Lock keycode NSP/CP
#7465625*27*# Insert Content Provider Keycode
*#272*IMEI#* Product Code Preconfig. ( to insert Sales Code)
Perhaps I am there one forget but much pleasure with those codes.
Please be gentle and lets know if there possible still other codes to be
Nicey!!
10 char
reset
how a can my samsung galaxy I9000 phone update/reset
Related
MOST CODES SHOULD ALSO WORK ON 2.3.3
*#*#4636#*#* for battery and other general setttings like GSM/CDMA
*#*#8255#*#* for Gtalk service monitor
*#*#7780#*#* for factory data reset
*#*#34971539#*#* for information about phone camera (be very careful hitting options here)
*#*#7594#*#* change the "Power" button action in your phone.
*#*#197328640#*#* service mode
*#197238640# service mode
*#0*# testing mode
*#1234# display phones current firmware
*#*#1472365#*#* gps test
*#0011# network mode/cell info/power info
*#*#0*#*#* screen test menu
*#7465625# engineering mode
*#3214789650# gps service menu for JP3 fw
*#9900# Sysdump screen.. some sort of way to dump ram and other logs to sd card
*2767*3855# FACTORY DATA WIPE AND internal SD RESET as soon as you enter # use only if you want wipe your phone
*#*#273283*255*663282*#*#* Opens a File copy screen where you can backup your media files
New Froyo Codes !!!
*#1234# (View SW Version PDA, CSC, MODEM)
*#12580*369# (SW & HW Info)
*#197328640# (Service Mode)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#7780# (Factory Reset)
*2767*3855# (Full Factory Reset)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
*7465625*782*# (Configure Network Lock NSP)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
*#272*imei#* Product code , works on Froyo
thanx for the codes.
just used the last one for GPS testig. If you go to Apliccation Settings using this code you can turn on Skyhook. Anyone has an idea what this can mean?
http://samsunggalaxysforums.com/showthread.php/156-i9000-Galaxy-S-codes
Good stuff! Mods should consider "sticky" this.
Anyone tried playing around with the GPS setting? Saw one segment about accuracy, it stated "50". Will increasing or decreasing the value improve the GPS connectivity?
xhajkx said:
thanx for the codes.
just used the last one for GPS testig. If you go to Apliccation Settings using this code you can turn on Skyhook. Anyone has an idea what this can mean?
Click to expand...
Click to collapse
http://www.skyhookwireless.com/howitworks/
please some one make this a sticky
We should collect all useful info and then sticky. Thanks for the codes, will keep it in email.
soraxd said:
http://samsunggalaxysforums.com/showthread.php/156-i9000-Galaxy-S-codes
Click to expand...
Click to collapse
SGS forums 1 XDA 0
lol
Great info, OP. Thank you for this.
Comprehensive list of codes for Samsung phones here: http://samsung-firmware.webs.com/WEBPROTECT-samsungmobilecode.htm, obviously this is for all Samsung phones and some might not work with the SGS.
Also explanations for some codes here: http://forum.gsmhosting.com/vbb/f258/samsung-galaxy-s-working-codes-1046184/
This thread does need to be made sticky! we need an expert to tweak those settings!
is there a code to get into the sim lock menus
*#7465625# engineering mode
wliu88 said:
*#7465625# engineering mode
Click to expand...
Click to collapse
thanks wliu88
i will update the list
This is the first thread I've rated, I gave it a 5.0, I encourage everyone else to give it a positive rating so it can get attention and maybe get a sticky.
This is so good.
But, I have one quesstion.
Where did u get all those codes??
While everyone certainly appreciates this thread (and please rate it so!), this thread will most likely not be made into a sticky. In my opinion no forum should have more than 4 or 5 stickies, so space is tight.
This thread is referenced in the FAQ as the answer to question 25, 'what are the secret codes', and thus users searching for these codes and who read the FAQ (as they should) will find this thread anyway.
*#9900#
Sysdump screen.. some sort of way to dump ram and other logs to sd card.
Like to add this for GPS :
*#1472365#
I am from India, GPS works only if under clear sky that to after few minutes.
Played a lot with settings. No good lock till now.
Sent from my GT-I9000 using XDA App
there is a code to change the default language.. good if you do not want it to start in russian every factory reboot/firmware update.
I can't remember the code.. anyone have it?
Anyone know what this command will do?
*#272*imei#
Sent from my GT-P1000 using XDA App
You can change your world region. When you do it, your tab will factory reset and wipe everything.
where do you know this code from?
btw: u can alter the code by simply navigating (with a file manager that knows root) to /system/csc and edit.the salescode.dat to what you want, reboot and you have the new region without data loss
*#06# (Display IMEI number)
*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)
or *#7780#
*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)
or *#272*HHMM#*
*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
*7465625*782*# (Configure Network Lock NSP)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
Secret Codes- Some of these will only work with specific firmware
*#06# (Display IMEI number)*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)or *#7780#
*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)or *#272*HHMM#*
*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
*7465625*782*# (Configure Network Lock NSP)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
Landroid said:
btw: u can alter the code by simply navigating (with a file manager that knows root) to /system/csc and edit.the salescode.dat to what you want, reboot and you have the new region without data loss
Click to expand...
Click to collapse
That is true and doing that will change what is available to you in the samsung apps, and I am sure other things too.
CWP, XEU, KOR (they have to be upper case letters) are a few to play with.
I saw the code in the phone thread for SGT, thanks for the list. I will issue a thanks when i get home
Sent from my GT-P1000 using XDA App
These are for all phones, so some won't work with the tab.
The following codes can be dialed in the dialer in order to perform various tasks. I have classified the codes by category for easier retrieval.
!!Entering the service menus may void your warranty. Only use these codes if you know what you are doing!!
Those codes have been in use on the Samsung Galaxy and although I have not tested all of them, those I did still work.
Obtain/Change Device Information
*#06# (Display IMEI number)
*#1234# (Display current firmware)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)
or *#272*HHMM#*
*#12580*369# (SW & HW Info)
*#44336# (Sofware Version Info)
Reset
*#*#7780#*#* or *#7780# (Factory soft reset)
*2767*3855# (Factory hard reset to ROM firmware default settings)
Firmware Tools
*#2663# (TSP / TSK firmware update)
*#34971539# (Camera Firmware Update)
*#7412365# (Camera Firmware Menu)
or *#*#34971539#*#*
*#03# (NAND Flash S/N)
General Testing/Debugging
*#0*# (General Test Mode)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#197328640#*#* (Service mode main menu)
*#7353# (Quick Test Menu)
Wireless
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#232339# (WLAN Test Mode)
*#526# (WLAN Engineering Mode)
*#528# (WLAN Engineering Mode)
GPS
*#1575# (GPS Control Menu)
*#*#1472365#*#* (GPS test settings)
Sensors
*#0588# (Proximity Sensor Test Mode)
*#0589# (Light Sensor Test Mode)
Audio
*#0673# (Audio Test Mode)
*#0283# (Audio Loopback Control)
*#0289# (Melody Test Mode)
Buttons
*#7594# (Remap Shutdown to End Call TSK)
Battery
*#0228# (Battery status: capacity, voltage, temperature)
Other Test/Debugging (many of these items are accessible via the service/test menus listed above)
*#32489# (Ciphering Info)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#273283*255*3282*# (Data Create Menu)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
*7465625*782*# (Configure Network Lock NSP)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
There is one I don't see in your post:
*#*#9900#*#*
Otherwise, nice thread.
Sent from my highly desired HTC Desire Z with XDA app.
geko95gek said:
There is one I don't see in your post:
*#*#9900#*#*
Otherwise, nice thread.
Sent from my highly desired HTC Desire Z with XDA app.
Click to expand...
Click to collapse
Is it possible that it does the same as:
*#9900# (System Dump Mode)
http://forum.xda-developers.com/showthread.php?t=1069015&highlight=secret+codes
jje
JJEgan said:
http://forum.xda-developers.com/showthread.php?t=1069015&highlight=secret+codes
jje
Click to expand...
Click to collapse
Note sure if the other thread doesn't have appropriate tags, but it doesn't pop up in the search, suggestions of similar threads or google.
The main difference between both threads is I have sorted the codes by purpose.
It seems some codes are only in the other thread and vice versa. Hopefully these can be joined.
Yes that was my intention as the original was not tested .
jje
*#350# - Reboot Device
*#197328640# - Testmode Menu
*#1111# - SW version
*#1234# - Firmware version
*#12580*369# - Version (PDA, Phone, H/W, RFCallDate, CSC)
*#03# - Unique Number (Nand Flash)
*#8736364# - OTA Software Update (Without Signing up and Signing in)
*#9900# - SysDump (Also allows to enable/disable fast dormancy)
*#3282*727336*# - DataCreate (Creates OnScreen Report of Phone Status)
*#273283*255*663282*# - DataCreate Test (Fills Images, Videos etc.)
*#273283*255*3282*# - DataCreate Test (Fills SMS. MMS, PhoneBook etc.)
*#0368# - FM Radio Config
*#9090# - Diag Config
*#872564# - USB Logging(DM)
*#34971539# - CameraFirmware Standard (Check and Update Firmware)
*#86824# - TouchKey F/W Info and Update
*#7780# - Factory Data Reset
*#2767*2878# - Custom Reset
*#2767*3855# - FULL Factory Reset (Wipes Internal Storage)
*#745# - Sec_Ril_Dump
*#746# - Svc_Dbg_Dump
*#7284# - PhoneUtil
*#7353# - Hardware Test Menu
*#0588# - Proximity Sensor Test
*#0589# - Light Sensor Test
*#0011# - Camping Information
*#0228# - Battery info
*#0283# - Loopback Test
*#0289# - Melody Test
*#28777# - Bluetooth Test (Sniff On/Off)
*#2726564# - Bluetooth Test (Debug and Logging)
*#232337# - Bluetooth Device Address
*#232331# - Bluetooth RF Test
*#526# - WlanTest
*#528# - WlanTest
*#232339# - WlanTest
*#232338# - WlanMacAddress (Also Enable/Disable Power Saving Mode)
*#5238973# - LCD Type
*#0*# - LCD Test Menu
*#2664# - Touchpad Test menu (LCD)
*#2663# - Firmware update MMC (Touch Screen Version Info)
*#2263# - Band Selection
*#44336# - Internal Version Info
*#3214789# - Enable / Disable GCF Mode
*#4238378# - GCF Setting
*#369852# - Test APN Settings (Restarts Data Connection)
This should keep you all busy for a while!
nice!!
Have you tried *#2263# - Band Selection?
andydotph said:
nice!!
Have you tried *#2263# - Band Selection?
Click to expand...
Click to collapse
Yes, selecting HSDPA only stops it switching all the time!
does your phone have to be rooted to perform these codes cause they don't seem to work on my garminfone running 2.1 eclair?
saskatchatoon said:
does your phone have to be rooted to perform these codes cause they don't seem to work on my garminfone running 2.1 eclair?
Click to expand...
Click to collapse
That's because they are samsung galaxy s2 codes not generic android ones.
Sent from my GT-I9100 using XDA Premium App
THANK YOU!! I've been looking for these codes for a long time. (3 days )
I used one of these codes to disable hspa+ so my phone would be 3 g and not waste battery life how do I reenable?
Found these on another site just wanted to share.
*#06# (Display IMEI number)
*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)
or *#7780#
*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)
or *#272*HHMM#*
*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
*7465625*782*# (Configure Network Lock NSP)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
Secret Codes- Some of these will only work with specific firmware
*#06# (Display IMEI number)*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)or *#7780#
*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)or *#272*HHMM#*
*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
*7465625*782*# (Configure Network Lock NSP)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
Will these work on the 7.7 tab or only on original 7 tab?
Sent from my GT-P1000 using XDA App
These are generic to android. Some will work on all devices, if they have a dial pad. But that doesn't mean any setting can be changed.
rangercaptain said:
These are generic to android. Some will work on all devices, if they have a dial pad. But that doesn't mean any setting can be changed.
Click to expand...
Click to collapse
Hey ranger long time no but then again i havent been here in a while until since im getting new 7.7 tab, u going to get it or just sticking to the original?
Sent from my GT-P1000 using XDA App
Thanks for the codes.
Tried on new 7.7 tab and only the cose to check imei worked otheres didnt.
Sent from my GT-P1000 using XDA App
Usefull stuff. Thanks.
Thanks for the codes.. Nice job..
adinis78 said:
Hey ranger long time no but then again i havent been here in a while until since im getting new 7.7 tab, u going to get it or just sticking to the original?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Hey Amigo, I still enjoy my at&t tab. But I use a gs2 as my phone and tether the tab for reading, web surfing, etc. I always look at the new tabs, but this one is very hard to surpass.
Very cool... Thanks
Sent from my GT-P1000 using XDA App
useful stuff, but not all codes work in my tab, i wonder why
Thank you for this list, great!
klcow said:
useful stuff, but not all codes work in my tab, i wonder why
Click to expand...
Click to collapse
That is due to the custom ROM I think.
Err excuse my nubness but how do you dial numbers on a tablet?
Zero_Tab_2011 said:
That is due to the custom ROM I think.
Click to expand...
Click to collapse
Nope, that's because it's a generall list for android and some features aren't available on the Tab...
---------- Post added at 10:22 AM ---------- Previous post was at 10:21 AM ----------
PinkDroyed said:
Err excuse my nubness but how do you dial numbers on a tablet?
Click to expand...
Click to collapse
Use the dialpad.... If not on the screen look in the drawer for a "phone" icon
does these samsung code use any packet data or wifi connection when update any firmware?can i update tsp without internet connection or sim card?im just confused where do the update data come from
Hmm, some of this look useful, will give them a try just out of curiosity.
Hello All,
Does anyone know how the engineering menu is enabled and if these codes are valid for all Samnsung Tablets? How about the Galaxy 8.9 LTE?
Thanks,
GeN
very cool. thanks
Thanks for the codes, but somehow only a few work on Samsung Galaxy Tab2 (P3100) india
I was trying the WLAN test but it didn't worked out.
Don't know what is wrong with my tablet, it won't turn ON wi-fi after some update or don't know what went wrong exactly.
did Reset from Stock recovery and it didn't worked out.
Service center in my town doesn't have diagnostic tools or even the ROM and are hopeless and helpless.