Related
I rooted my phone today, all went well, so I decided to try a new 2.2 ROM. Made a clockwork backup and was able to install the new ROM no problem, but I had a bunch of contacts and such that were saved to the phone and not backed up, so I booted into recovery mode (with the help of ROM Manager as my phone is one of the hw locked ones) and restored my backup thinking I could use Titanium Backup to backup all the contacts and the few apps I wanted to keep, then reinstall the new ROM. It went through the restore process, but when it finished and rebooted it got stuck at the Vibrant / Samsung screen. I've searched through dozens and dozens of threads, but I can't figure it out. What can I do if I can't get into recovery (or download) mode? I sure hope it can be fixed.
That just happened to me yesterday and this method fixed my vibrant
Per that thread:
1.Your Device must be in DOWNLOAD mode to use ODIN.
I'm unable to get into download mode.
Well, first of all; there is a fix for hardware locked phones that you really should have flashed first. It worked like a charm on my own phone, allowing me to get into download and recovery mode.
A good place to start is here with the holy bible.
http://forum.xda-developers.com/showthread.php?t=771111
I recommend looking at this download technique
http://forum.xda-developers.com/showthread.php?t=749413
If that doesn't work, you can make this simple little jig to pop it into download mode.
http://forum.xda-developers.com/showthread.php?t=819551
And if you get your phone back to a stable state. I recommend looking at the hardware lock fixes.
http://forum.xda-developers.com/showthread.php?t=802763
yes that can be tricky but watch this video it went right to download the first time for me
ceosmind: Followed the video several times, but I only get the green battery screen. If I hit power as well, I get stuck at the Vibrant Screen.
cwoodworth: I'm pouring though the links you gave...I'll report soon
cwoodworth:
Link 1 is awesome, but everything I read in there needs the phone in recovery or download mode, which I can't get to.
Link 2 didn't work, can't get the phone to boot.
Link 3 sounds promising, but it would have to wait till tomorrow as I don't have the requisite parts
Link 4 is good info, but I can't apply it until I get my phone to boot in some fashion
Ya, honestly you need to just search around the forums for all the different techniques that people have for getting into one or the other. Aim to get into download mode, because then you can reflash a good image.
Chances are you ran a NANDROID restore without flashing a 2.1 kernel (unless your backup was 2.2 as well which means I'm totally wrong). To fix this, see if you can boot into recovery and perform "adb mount" and push a 2.1 kernel to the phone. Flash the 2.1 kernel and your phone should boot properly.
Open up odin on your pc,take the battery out of your phone,put it back in , hold the volume up and down keys, plug the usb into your phone this should get you into download mode. I dont know if this will work because your hw locked but it can't hurt to try good luck.
Sent from my SGH-T959 using XDA App
go_l_den : You called it... I was under the impression that the backup was a full backup including the kernel.
I've tried every way I can find to get it into recovery or download mode, looks like I have 2 options left
1. Make a jig to force it into download mode tomorrow
2. Try to trade the phone for another at T-Mobile
Bummer
AustinKnight45: When I try that I only get the green battery screen. I've tried in both Linux and windoze
whoops, double post
I notices a few users have mentioned that they're dealing with trying to restore or unbrick their Continuum after flashing incompatible kernels and other problems.
I made this backup immediately after I got root, before I did anything else, to make absolutely sure I wouldn't be SOL if anything went awry. I've made absolutely certain this works, by unzipping and flashing on my own Continuum prior to uploading. It contains the system, recovery, and kernel partitions.
This file is also helpful if you need to get back to stock for warranty purposes, in which case you can manually un-root by using your favorite file explorer (I happen to prefer ES File Explorer), grant root permissions, mount system as rw, then manually delete SuperUser from /system/apps, su from /system/bin, and busybox from /systen/xbin. I hope this helps some of you who have been stuck.
You don't need to be rooted to flash this. Simply unzip, flash the .tar.md5, and you're golden. If you end up in restore mode after flashing, you probably need to do a hard reset, but this is unlikely as I tested it by flashing this a few times after installing various programs from the Market and never had to do a hard reset.
Don't forget to put your phone in Download mode by removing the battery, then holding the vol down button while inserting the usb cable. Good luck!
http://www.mediafire.com/?a897dbakz4j7k4f
Thanks for this. I had been messing around with the phone. I was able to get it back to stock.
Kay I try to flash this and it's telling me it's an invalid image type
Never mind, I got it. Thanks
Not a problem, glad I could help!
My phone was soft-bricked. This worked like a charm. Thank you so much!
I ran this and everything passed then when i boot up the phone with animations and sound after the animated verizonwireless logo is up for a while; everything goes black.
any suggestions? never mind I had to do a wipe then it worked
kingtuk1 said:
I ran this and everything passed then when i boot up the phone with animations and sound after the animated verizonwireless logo is up for a while; everything goes black.
any suggestions? never mind I had to do a wipe then it worked
Click to expand...
Click to collapse
Yup, gotta wipe! At first it's so easy to forget this step. When you get to customizing your installation, you'll get to used to having to wipe it'll become second nature!
I'm so glad to hear this is coming in handy for you all! Now that you got this done, get yourself froyo, courtesy of imnuts: http://forum.xda-developers.com/showthread.php?t=1197415
Ok after having installed EC03 Froyo via imnuts's thread. Everything was going fine except for some bugs here and there. Fast forward a couple weeks later and I try to fix those bugs by installing a stock odin rom via torque's thread (seems so foolish now that I look back on it). Which brings me to today and my bricked Continuum.
Well to explain further I tried to install the odin Rom only to receive a FAIL in the end (Selected the md5 file through the PDA option and proceeded to flash). Disconnected afterwards only to find out I can't even get the Samsung logo to show up or the phone to charge, but the phone will still go into download mode.
And this leads me to this thread with the same outcome. I've tried flashing this eclair? image only to end up with the fail message again. After the recovery.bin stage it just says "Complete(write) operation failed." Any help with this matter would be appreciated.
Edit: After some searching, gonna try it with imnuts' DL17 image. Will post results.
Edit2: No luck with that either. Guess I'll just wait until the Bionic gets released, but for now I'll have to dig up my dumbphone.
Native89 said:
Ok after having installed EC03 Froyo via imnuts's thread. Everything was going fine except for some bugs here and there. Fast forward a couple weeks later and I try to fix those bugs by installing a stock odin rom via torque's thread (seems so foolish now that I look back on it). Which brings me to today and my bricked Continuum.
Well to explain further I tried to install the odin Rom only to receive a FAIL in the end (Selected the md5 file through the PDA option and proceeded to flash). Disconnected afterwards only to find out I can't even get the Samsung logo to show up or the phone to charge, but the phone will still go into download mode.
And this leads me to this thread with the same outcome. I've tried flashing this eclair? image only to end up with the fail message again. After the recovery.bin stage it just says "Complete(write) operation failed." Any help with this matter would be appreciated.
Edit: After some searching, gonna try it with imnuts' DL17 image. Will post results.
Edit2: No luck with that either. Guess I'll just wait until the Bionic gets released, but for now I'll have to dig up my dumbphone.
Click to expand...
Click to collapse
Read the OP from pastorbennett here: http://forum.xda-developers.com/showthread.php?t=1203597 and try the unbrick process. You can do a search for pastorbennett and trailblazer. Both have posted "recovery processes", or at least links to others that have posted recovery processes. They've saved my butt a couple of times... Except on my first phone that wouldn't go into DL or Recovery Mode. It would just flash the Samsung logo, over, and over, and over again... That happened before pastorbennett posted the unbrick info. Oh well, Verizon replaced it under the hardware warranty. Thankfully.
Looks like I didn't search hard enough.
Thanks for the link Moon. I will be trying this ASAP.
Hit a little bit of a snag trying to get it to work. It told me to install drivers for my device, however my Phone does not show up in the dropbox and the only related thing I can find is "Gadget Serial".
I've tried uninstalling the drivers, but Win7 is being a fool and automatically installing drivers for me.
Does anyone know why i get a 'FAILED' after trying to flash this with Odin? My phone is soft-bricked btw.
Native89 said:
Looks like I didn't search hard enough.
Thanks for the link Moon. I will be trying this ASAP.
Hit a little bit of a snag trying to get it to work. It told me to install drivers for my device, however my Phone does not show up in the dropbox and the only related thing I can find is "Gadget Serial".
I've tried uninstalling the drivers, but Win7 is being a fool and automatically installing drivers for me.
Click to expand...
Click to collapse
Okay, if you can, grab a different computer (either Windows XP or Windows 7) and install the samsung drivers from this post: http://forum.xda-developers.com/show....php?t=1203597. The hint here with ANY Windows computer is to install the device drivers FIRST! (I've been a system administrator for about 20 years.) Then plug in the hardware. It usually makes the installations go MUCH smoother.
If you have to use your computer, try installing the Samsung drivers first, then plug the phone in.
zzir said:
Does anyone know why i get a 'FAILED' after trying to flash this with Odin? My phone is soft-bricked btw.
Click to expand...
Click to collapse
The key to odin seems to be this:
1. Start odin.
2. Click the PDA button and select the odin TAR or MD5 file. (You can only do one. Not both.)
3. Make sure the phone is not plugged into the computer.
4. Make doubly sure the phone is not plugged into the computer.
5. Put your phone into download mode. (With the phone off, hold the Volume Down button and turn the phone on.)
6. Then plug the phone into the computer.
7. Start the odin flash and you should be good to go. Also, before unplugging the phone, make sure it says either success or failed. If it doesn't say anything, or says loading (or something like that), WALK AWAY! Go get yourself a cup of coffee, a soda, a nice cup of tea... Something. I recommend waiting at least 10 minutes. If the progress bar has not moved, in that time, okay, then pull the cable and the battery and start again.
I tried to do this, but when it boots into recovery mode, it says update.zip is gone. Any ideas why this might be happening? Also if it's like this, will Verizon take it back within the 14 day return policy without charging me anything?
Tarheel487 said:
I tried to do this, but when it boots into recovery mode, it says update.zip is gone. Any ideas why this might be happening? Also if it's like this, will Verizon take it back within the 14 day return policy without charging me anything?
Click to expand...
Click to collapse
Did you flash the CWM Recovery in Odin? (cwm_recovery_test4_adryn.tar) Can be found here if not http://forum.xda-developers.com/showthread.php?t=1230072
is it possible to flash this with heimdall or only odin?
ntien said:
is it possible to flash this with heimdall or only odin?
Click to expand...
Click to collapse
I don't know, however, pastorbennett posted this http://forum.xda-developers.com/showpost.php?p=16600453&postcount=29. It might help? I use Linux at home to build most of this stuff, then use my wife's Windoze machine to flash. It just seemed easier.
Yes, you can use heimdall, you just need to extract this .tar and put the extracted files in the corresponding location in heimdall xD
Sent from my SCH-I400 using xda premium
yeah i saw that but in heimdall 1.3 the UI is different. i don't know where to put any of the stuff. i have the .tar but i dont know where to put the other stuff. here's a screenshot
Ok, i realize i have a different phone from this thread but it is close and my problems closely reflect the issues ive seen with the Galaxy S.
A little background. Im no perfect i know what im doing when it comes to rooting. I have an HTC Tbolt and rooted many of those, an older touch pro 2, and this is first time doing a samsung. I am getting the hang of ODIN (i wish everyone would just use this program instead of bouncing back and forth between heimdall and ODIn but whatever) Im liking ODIN cause it works well. I was successful at flashing a new rom into this Samsung phone. 95% of it worked, wifi i think didnt but everything else worked. While trying to fix the phones wifi somehow i have stopped the phone from booting into CMW recovery unless forced or booting into a rom. I can get into CMW but i must hold down the Vol Down button to get there, otherwise a clean basic boot takes me to the stock android system recovery screen and will not boot a rom.
I have something backwards or out of order. I am just trying to get the rom to identify the installed CMW and the installed ROM through CMW but it wont do it.
Any help would be appreciated, i dont want my GF to find out i jacked her phone lol
Which phone do you have? SGS? I can just talk about SGS+ but I guess its similiar.
Try to install CWM with Odin, normally it should replace the stock recovery (haven't heard of both running at once).
Once you have installed CWM you can install your custom ROM with CWM (look at the install instructions).
If you want to install stock ROM with Odin it will replace your CWM with stock Recovery.
Post the link of the thread/recovery you want to flash.
annqx said:
Which phone do you have? SGS? I can just talk about SGS+ but I guess its similiar.
Try to install CWM with Odin, normally it should replace the stock recovery (haven't heard of both running at once).
Once you have installed CWM you can install your custom ROM with CWM (look at the install instructions).
If you want to install stock ROM with Odin it will replace your CWM with stock Recovery.
Post the link of the thread/recovery you want to flash.
Click to expand...
Click to collapse
Its a stratosphere. Im using the root and / or stock files in the root method. I use ODIN to flash the StratCWMRecovery.tar.md5 and if i tick "reboot" then it reboots into CWM i install a rom or stock rom and it finishes. I reboot the phone and it instantly goes back to android system recovery. If you like ill make a short video to give you an idea of whats going on.
I will note that im close to making a jig but its not 100% bricked obviously. 3 button method still works (and unecessary at this point since all the phone does is go straight into the stock bootloader) and then after i install CWM i can force it in to CWM but it wont actualy boot into it.
From a programing standpoint i feel the pointers or partitions are incorrect. Its like booting a computer that has a hard drive with windows installed however getting the bios to tell it to boot from the hard drive isnt working. THats the easiest way to explain this.
One thing i want to note is the only errors i am getting are when i try to partition the SD card from CWM. I get an error saying sdparted is not found.
I am not getting a full understanding of how the root system works on this phone.
Again any help is appreciated.
Made a short video. Its uploading now. http://www.youtube.com/watch?v=tFZ5Adm5AdQ
So whatever i did i was able to fix. I think me being a very visual person and normally having access to all files i need or could use in a situation is always nice. Here, i didnt but i found them. Here's the link. Its obviously for stratosphere but i took about 10 minutes and let ODIN install all these files and it worked.
original posting but the link doesnt work for download
http://rootzwiki.com/topic/11183-eh2-full-factory-odin-restore/
where i downloaded it
http://www.fileswap.com/dl/t4D235pUTO/SCH-I405.EH2_rel.md5.html
Again this is for stratosphere. Since it really helped me return to stock and allow me to re root in about 15 minutes this thread should be moved but there is no stratosphere area
ok, so i have the verizon lg g2, i have flashed numerous phones before and never had anything like this happen. First off, it took me hours to just get the thing rooted after going thru about 15 different walkthrus before one worked.
Then i decided i wanted Malladus ROM so i tried flashing twrp recovery with loki, didnt work, went thru damn near every forum about it coming out with nothing....until...found one talking about flashify and everyone said it worked fine. So i do it, took about 1 second and said it worked, restarted and nothing had changed, except now i cannot enter download mode! When i do it just shows "firmware update" it never changes, left it on all night still at 0%.
I have unrooted it (even though it still says its rooted, but no longer have permissions) and i did a full reset, NOTHING works!!
So before you guys chime in, let me tell you what i have tried....EVERYTHING lol .....I know the only way to fix my phone to fully unroot it is to flash back to original rom, so i went to http://forum.xda-developers.com/showthread.php?t=2448960 and that wont work because 1. cant get into dl mode, and 2 it wont let me open the flash tool (did everything right, researched and came up with nothing)
then i went to http://forum.xda-developers.com/showthread.php?t=2432476 cant get that to work either because cant get into dl mode, so now i have TWO 2.2gb rom files on my comp that i cant use,
And just to be clear, I KNOW HOW to go to dl mode lol, i have wrote it several forums and all people keep saying is the stuff ive already said.
Oh and i cant push with adb either...that is how i originally tried twrp and after 3 hours of trying to figure it out i finally got it to go thru (it was wrong i think but it worked) and that may be what has caused it to crash the dl screen.
Ive never used adb before and after reading 7 diff forums beginning to end (bout a 1000 pages) i realized they were all the same but do not actually explain enough for someone who has never one it. It said to push, well idk what that meant! lol I need step by step instructions in order to fix this, even the tiniest of things may be something i would miss.
PLEASE HELP ME!!!! Thanks guys!
Download mode should work... The first night I got my G2 it was about 4 in the morning, and I immediately installed TWRP on it (3.2 is what you want 3.3 doesn't work), and promptly erased everything on my phone... Partition, data, and everything.
But download mode was still intact, and that first thread you linked worked just fine for me. If you're having issues with that flash tool and being stuck at a login screen, you missed the part where it tells you to download a DLL file and place it the flash tool install directory. That file will bypass the system login and let you use the program.
I don't know how long you've been up, but I'd say take a break and come back to it in a bit. If you still can't download mode to work, have a friend come over and look up how to get in download mode, then have them try it. I've done that many times... Thought I was doing everything right and a second pair of fresh eyes found some tiny thing I overlooked in the process.
I hope you get your phone working man, sorry I can't be of more specific help.
Sent from CAMACHO, my Verizon G2 (VS980) running PAC ROM.
First want to say hi and that this site is full of knowledge so any help with my subject will be great.
Got a att s4 sgh-i337 phone. I rooted it before the lollipop ota update was out and everything went fine. Then the lollipop update came out and I followed one of the methods on keeping root and updating to 5.0.1 lollipop on the phone. Everything went fine with that. Still showed root status and never did the phone brick or have any issues in the updating.
At some point though, I did run triangle away because I would have the custom logo and opened padlock when the phone would boot up. I knew it wasn't a huge deal but the counter showed correct and never could just figure out how to get it to go away. Either way, I did run it and I think rebooting twice, the factory loading image came back to it. Now it shows my current status as 0 for the counter and the binary is Official.
I have not tried to load any roms or nothing like this to the phone, just followed the instructions to give it root access so I could run a few different apps and adaway for when I listen to Spotify.
One day, I was trying to install a new version of Words with Friends and it failed because I think wwf was open, but I did go back and install it. For some reason now, my phone never notifies my with a wwf notification when somebody plays me. Every now and then, it might pop up when I restart the phone but that is it. I don't think facebook notifies me everytime also but was more worried about words with friends.
Searching google, it says to go into recovery mode and flash the cache of the phone there. I have done the cache memory in the phone but that has not fixed my problem. When trying to go to recovery, it never works, it would always show, recovery booting and then load the phone up as normal.
I have download quick boot and rom manager since they all have an option to boot into recovery rather than pressing the buttons but it always does the same thing. Reading the web though, it seemed like I needed to install a different recovery than the factory I guess, so using rom manager, I tried twrp and that didn't work so I installed ClockworldMod 6.0.4.7. Rom manager shows that as the current recovery method.
When I try to boot into recovery, it still shows that recovery is booting and then goes straight to loading the phone as it should normally.
Now though, every time I restart my phone, it says recovery is trying to boot but never does.
How do I fix my phone to be able to boot into recovery and it not try to boot every time it powers on. I have tried searching google but I just just can find an answer to my direct problem. I know how to hold the buttons and go to recovery but does not work, and I also know how to get to it from the different app programs(rom manager and quick boot) but they do not work either. It would be nice to get the wwf notifications to work properly again also.
If you need any information from my phone, please ask. Thanks for any help on my matter,
Charlie
Odin stock and start over.
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
creepyncrawly said:
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
Click to expand...
Click to collapse
Thanks for the replies guys, I really don't know a whole lot about rooting other than following instructions about it. I was unaware you could not use the twrp or cwr as a recovery. My recovery did not work before so that is why I was trying to install those. I knew you could not install custom roms but I did not know that you could not use rom manager to install custom recoveries.
I appreciate the help so far and I will look into that thread you mentioned. I haven't read it but will this take me back to stock lollipop 5.0.1 and I just reinstall apps or will I have to re-root the phone.
Charlie
please delete, sorry
Charlie
You have to go back to 4.4.4, to the nb1 base, root with towelroot, and then use the keeproot method to get back to 5.0.1 rooted. The instructions are in the guide, and also a link to the keeproot thread is there.
By the way, for future reference, questions, help and troubleshooting issues should go in the Q&A forum, not the general forum.
not having any luck
Ok guys,
I am trying to follow the guide but not having much luck.
I downloaded the I337UCUFNB1_4.4_Stock_Odin_tar and put it in the AP Odin file. I'm not sure if I should be using it or the other file named I337UCUFNB1_4.4_Rootable_Stock_Odin_tar to begin with. The instructions said to use the first one so that is the one I was trying to use.
After putting the first file in the AP slot of Odin and hitting start, it begins to try to do it's thing and then says it fails!
What do I do now? Am I doing something wrong or what because I'm trying to follow instructions but not having much luck.
Please help. Sorry for posting in the wrong area also in the beginning.
Charlie
I'm screwed
Now when I turn my phone on, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
doing better now
Pretty sure I got it going finally. I changed cords and then changed ports on my computer and it finally did go back to stock without an error. I'm currently back on Lollipop and rooted so now is the fun of reinstalling contact info and anything else. So far I have not rebooted but it was not showing the recovery booting option when it did reboot. Hoping my notifications work properly now also!
Thanks!!!
Charlie