What is the solution to get the "T-Mobile My Account" app to work in any Android build for HD2? I tried to find a solution for it and I just found MarketEnabler method that it didn't work for me. Is it depends on Android build or we can setup on any build? I've tried several ROMs like FroyoStone Sense, FRG83 MCCM SE, mattc Leo, Mdeejay builds and phireMOD. I know T-Mobile My Account has been working on BlueTopia ROM but I do prefer to use in other builds as well.
HTCore said:
What is the solution to get the "T-Mobile My Account" app to work in any Android build for HD2? I tried to find a solution for it and I just found MarketEnabler method that it didn't work for me. Is it depends on Android build or we can setup on any build? I've tried several ROMs like FroyoStone Sense, FRG83 MCCM SE, mattc Leo, Mdeejay builds and phireMOD. I know T-Mobile My Account has been working on BlueTopia ROM but I do prefer to use in other builds as well.
Click to expand...
Click to collapse
BUMP. I would like to know too if that can be ported in other builds.
I would have thought it would only work on specific TMOUS listed builds, as the other ones are multiregion.
Related
Hello.
I have a HTC HD2, that I have been changing ROM's on for a while now.
Can't really find what I'm lokking for.
Is it possible to run Android on HTC HD2 without the need of WM ??
Hope that someone have a feedback on this....
tegbakke said:
Hello.
I have a HTC HD2, that I have been changing ROM's on for a while now.
Can't really find what I'm lokking for.
Is it possible to run Android on HTC HD2 without the need of WM ??
Hope that someone have a feedback on this....
Click to expand...
Click to collapse
No not at this stage. I can recommend Miri's ROMs for android compatibility but havn't tried many others but there is currently no way to run Android on our HD2s without first booting into WM.
There are also a few ROM builds (see the HD2 android development thread) that have a lot cut out of them for faster operation/boot and there's also the option of using one of the developed Android loaders (boots WM then Android for you).
Not possible right now. The devs are working on a NAND version which will make it possible, but it's not available yet.
Highly recommend Energy's Titanium rom, its very lightweight and is perfect if you reboot your phone and want to get back to android fast.
I use ChuckyDroidROM as Winmo build (very low on all recourses), and put shubCRAFT 1.5 or mattc Froyo 1.7 on top of it.
Using the little boot app in the ROM it runs great now
Almost dont notice its a layer
Its cool to have 2 OS on 1 phone, why not?
Question seems to be answered. Thread closed.
Ok i have had a few versions on Android running now but seem to have the same issue with every one, which is ramdomly loosing data connection although it is showing that it has. My question is has it got anything to do with the WM ROM and Radio etc im Running or is it going to be the Android Build.
I have
ChuckyRom WWE
Radio 2.15.50.14
No android on there at the Mo as I have just formatted the card I did have Mdeejay Evo Sense v.23 Revolution
Can you help ?
TommyHD2 said:
Ok i have had a few versions on Android running now but seem to have the same issue with every one, which is ramdomly loosing data connection although it is showing that it has. My question is has it got anything to do with the WM ROM and Radio etc im Running or is it going to be the Android Build.
I have
ChuckyRom WWE
Radio 2.15.50.14
No android on there at the Mo as I have just formatted the card I did have Mdeejay Evo Sense v.23 Revolution
Can you help ?
Click to expand...
Click to collapse
If you have had all PPP builds (which I suspect you have), these data drops are normal. There are ways to improve stability, look around in the development section and your build thread, or switch to an RMNET build if you really want a stable (but slower) connection. If you're on RMNET already, you'll need someone more advanced to help you but your build's thread would be a good starting point.
Ok cheers, are my ROM and Radio ok as far as you know ?
The ROM and Radio is ok. In the android dev section you'll find this wrapper. Try it out. And I recommend you to use hastarin 8.5 kernel. Seems to improve the connection stability again.
Edit: Hastarin 8.5
Hi,
I have this problem and other users have this problem too. I have Vodafone NL and for some reason I don't have internet on some Android builds. In nearly all MDJ builds it works without a problem, but in the more unknown builds and the new RAM builds it just doesn't work. I usually see the problem too when i update a kernel of a build.
I'm currently using the Revolation 1.2 build, and it doesn't have any problems. But when i try the CMYLXGOs.BlueTopia.HD-Beta3 or one of the RAM builds(want it!), it just doesn't work.
Please help me...
williamsean said:
Hi,
I have this problem and other users have this problem too. I have Vodafone NL and for some reason I don't have internet on some Android builds. In nearly all MDJ builds it works without a problem, but in the more unknown builds and the new RAM builds it just doesn't work. I usually see the problem too when i update a kernel of a build.
I'm currently using the Revolation 1.2 build, and it doesn't have any problems. But when i try the CMYLXGOs.BlueTopia.HD-Beta3 or one of the RAM builds(want it!), it just doesn't work.
Please help me...
Click to expand...
Click to collapse
APN settings get changed with every build. Check/search for Vodafone APN settings and adjust as needed.
This Android system is on SD card and running well previously.
After MAGLDR1.12 and WP7 are updated, I start this Android from MAGLDR, then I find that wifi does not work any more. (when I turn on wifi, the notification is "unable to scan for networks")
summit_zhang said:
This Android system is on SD card and running well previously.
After MAGLDR1.12 and WP7 are updated, I start this Android from MAGLDR, then I find that wifi does not work any more. (when I turn on wifi, the notification is "unable to scan for networks")
Click to expand...
Click to collapse
I would suggest you reinstall Android.
BTW What android build are you using?
I have tried several builds.
including
MDJ FroYo HD v.4.6
MDJ Revolution HD v.1.2
MDJ FroYo Sense Revolution v.1.7 [kernel: MDJ S6.1]
Its because those builds are not written to boot from magldr, they are designed for haret.exe.
If you want to boot Android from SD via magldr you need to use a compatible or edited build.
Thank you for your reply.
The build I mentioned above is MDJ FroYo Sense Revolution v.1.7 [kernel: MDJ S6.1]
I have found MIUI 1.1.14 with good wifi, but it has other many bugs.
Is there method that pick up wifi module from MIUI to MDJ?
summit_zhang said:
Thank you for your reply.
The build I mentioned above is MDJ FroYo Sense Revolution v.1.7 [kernel: MDJ S6.1]
I have found MIUI 1.1.14 with good wifi, but it has other many bugs.
Is there method that pick up wifi module from MIUI to MDJ?
Click to expand...
Click to collapse
Dude, Ive already told you you have to use a magldr compatible version, none of teh MDJ builds are compatible.
check these 2 topics aswell as some others for info on which builds work. I myself am using a edited version of NexusHD2 1.8 and works very well from MAGLDR-SD.
http://forum.xda-developers.com/showthread.php?t=913815
http://forum.xda-developers.com/showthread.php?t=913964
Download this version ANdroid fixed for magldr
http://www.multiupload.com/38KFUHNRJ6
Hi,
i tested several android sd roms for my Hd2 wp7 and after 7 roms i found one that is fully working with wp7, it does not freeze or something else,
Its Mdj Frojo hd 4.6, it the best rom for me.
If somebody knows an other combination please tell me?
Thanks.
Video to my HD2 WP7 with Android Froyo
http://www.youtube.com/watch?v=fMPlChCJDfY
ello007 said:
Hi,
i tested several android sd roms for my Hd2 wp7 and after 7 roms i found one that is fully working with wp7, it does not freeze or something else,
Its Mdj Frojo hd 4.6, it the best rom for me.
If somebody knows an other combination please tell me?
Thanks.
Video to my HD2 WP7 with Android Froyo
http://www.youtube.com/watch?v=fMPlChCJDfY
Click to expand...
Click to collapse
I use Cyanogen mod 7 and it is perfect , but led issue remains ...
For me the same Mdj 46
ok but i've tested Cyanogen Mod7 and the rom just freezes in the homescreen without any touch respons....I like the Cyanogen Mod rom cause its fast..
I've gotten practically every SD android build to work perfectly for me while dualbooting wp7. You do realize you have to edit the init.rc file in most builds to make it compatible with magldr, right? There's a thread on it in the SD android section. If there's any specific build you want that you can't get working, pm me and I'll see if I have it work. I've gotten 12 out of 13 builds I've tried to work great.
zarathustrax said:
I've gotten practically every SD android build to work perfectly for me while dualbooting wp7. You do realize you have to edit the init.rc file in most builds to make it compatible with magldr, right? There's a thread on it in the SD android section. If there's any specific build you want that you can't get working, pm me and I'll see if I have it work. I've gotten 12 out of 13 builds I've tried to work great.
Click to expand...
Click to collapse
I tried it with SuperRam and after welcome wizard, it shows black screen. I reset multiple times and it never loads again, just shows black screen after HTC logo. I'd prefer to use ram rom to save wear and tear on the sd card, so is there a step I am missing?
There's a newinitrd.gz that I deleted when I put the edited initrd.gz file in Android folder. Should I keep that in there? I have HSPL 2.08 and 2.14 radio.