Yesterday I tried to flash the latest firmware
Because of stupidness this was not really successful and my TAB didn't start after the flashing...
also pressing the power + volume down show's no effect.
the display turns on only when it's powered by the charger displaying 2 icons of a phone and a computer
I looked then through many forums and found at xda-developers patomas who had the problem.
Following solution worked:
1. wait until the TAB discharge (about 1 Day)
2. Start Odin and connect th tab to the computer
3. wait about 10 minutes, TAB connected to the computer
4. flash normal FW (I chose the XWJJ4)
thx patomas
Christian
Related
Hello,
After many search on internet I guess I am faced to a strange issue.
I just stop/start my phone like normal and I got always a black screen although my phone seems to boot correctly and start until the main menu BUT:
No more Galaxy S screen logo and no way to get recover or download mode.
Any idea how to debug this ?
Not I had upgraded to Froyo 2.2.1 2 months ago and never have this problem.
BR
Have you tried factory reset after backing up data .
jje
I am open to any ideas.
How can I factory reset my SGS without display. I am blind, my mobile don't have any display, stay black screen, so I have to go until factory reset menu being blind.
Are you on stock rom and is it possible to startup the rom ? If this is possible then you can reinstall your rom and don't forget to flash the correct boatloader (with working 3 button combo) in it.
I think if you keep power button held down it factory resets .
Download mode = recovery jig from front page .
But i would be taking phone to service centre .
jje
Are you on stock rom and is it possible to startup the rom ? If this is possible then you can reinstall your rom and don't forget to flash the correct boatloader (with working 3 button combo) in it.
Thanks but I can not flash it, I dont succeed to get either recovery or download mode and Odin does not detect my phone either Kies.
I can not naviguate until USB debugging mode to enable ADB and work.
My mobile start but I am blind, I am looking for a solution that may enable adb or bring me download or recover mode ?
Yesterday the screen display during 1 2 second when I press I dont remember Vol Up + power... Never succeed to make it again.
Are you sure that the phone isn't actually in download mode and that u just couldn't see it? Try pulling out the battery and going.into download mode and see if Odin sees it. If ya running stock not rooted I would take the phone back.
Sent from my GT-I9000 using XDA App
Unfornately I am sure it is not in download mode because:
1) Start the phone
2) Vibrate 1 time then 2 times
3) A ring is played then showing the phone receive mail or SMS (GPRS is on)
When I touch the screen I can unlock it and click, sound is played so phone always start normally.
Problem:
- No SGS logo at boot, black screen always
- No way to boot in recovery or download mode
- No way to configure either Kies connection when USB is plugged (with Kies I thought I can upgrade the SGS to Gingerbread firmware) or enable USB debugging in order to connect using ADB.
I have ordered a JIG cable, maybe I will succeed to get the download mode ?
Thanks for your help.
I succeed to get the screen temporarly and flash using new firmware 2.2.1 but problem appeared, I flash with 2.3.3 and the same so I guess my phone is broken.
Device- Galaxy Note 4 International (SM-N910C)
The case here is:
- The Phone doesn't boot, or show anything as the splash screen
- when you try to charge the phone (while powered off) the device doesnt show anything at all, but the phone charges as the
battery heats up a bit
- when you press the power button (and nothing else ) and leave the phone alone for about 8-10 mins, it shows the download
mode screen WITHOUT the details on the top left corner.
- removing the battery and putting it back didn't work, and when you press the download mode button combination (volume
down+power+ home), it directly starts download mode but this time WITH the details on the top left corner, the warning doesnt come.....
- When in download mode, the device IS detected by odin
- but then when i try to flash the rom thorugh odin, again the same
problem (no boot)
So far, Download mode is the only thing i've seen on the phone, and nothing else
my Guesses: the files which store the splash screens, etc are corrupted,and are not even touched during rom flashing, because when i flashed a rom through odin, the process DID finish but the problem persisted.
Suspects: param.bin file
even though these can be the root of the problem, there is no way i can actually restore the original file because adb doesnt detect the device in the pc, only odin does. Yes, i've perfectly installed all the adb/fastboot drivers.
Thanks in advance to anyone that helps fix the problem......:crying:
One more guess
MrXDA72 said:
Device- Galaxy Note 4 International (SM-N910C)
The case here is:
- The Phone doesn't boot, or show anything as the splash screen
- when you try to charge the phone (while powered off) the device doesnt show anything at all, but the phone charges as the
battery heats up a bit
- when you press the power button (and nothing else ) and leave the phone alone for about 8-10 mins, it shows the download
mode screen WITHOUT the details on the top left corner.
- removing the battery and putting it back didn't work, and when you press the download mode button combination (volume
down+power+ home), it directly starts download mode but this time WITH the details on the top left corner, the warning doesnt come.....
- When in download mode, the device IS detected by odin
- but then when i try to flash the rom thorugh odin, again the same
problem (no boot)
So far, Download mode is the only thing i've seen on the phone, and nothing else
my Guesses: the files which store the splash screens, etc are corrupted,and are not even touched during rom flashing, because when i flashed a rom through odin, the process DID finish but the problem persisted.
Suspects: param.bin file
even though these can be the root of the problem, there is no way i can actually restore the original file because adb doesnt detect the device in the pc, only odin does. Yes, i've perfectly installed all the adb/fastboot drivers.
Thanks in advance to anyone that helps fix the problem......:crying:
Click to expand...
Click to collapse
Can anyone try and give me a ODIN flashable file that replaces the param file in the phone???
Hey guys, i bought a yotaphone 2 a couple of weeks ago and found out somehow, how to get yd206 to yd201 and android lollipop. I tried to flash it but i made some mistakes. I didn´t turn on usb debugging on my phone and i did not install the file android_usb file to my pc because it said ind file could´t install or so. After i flashed my yotaphone it was in a boot loop and i can´t even put it back into download mode or recovery mode.
Hope you guys can help me to revive my phone.
I had got just the same problem. Go to download mode again (ev. press and hold power and volume buttons for a long long time The flush the "original" firmware - here 4.4.3-S01-003-CN1.0.3.32a
After it you yotaphone will works again. Now you could check usb debugging (it's very very important to be done) and flush firmware what you like . . .
Omi
Pupkina Elvira said:
I had got just the same problem. Go to download mode again (ev. press and hold power and volume buttons for a long long time The flush the "original" firmware - here 4.4.3-S01-003-CN1.0.3.32a
After it you yotaphone will works again. Now you could check usb debugging (it's very very important to be done) and flush firmware what you like . . .
Omi
Click to expand...
Click to collapse
I tried already to hold power button + volume down for more than 20-30 seconds but it didn´t help. And how can i flash my phone without usb debugging? I can´t turn it on to activate the usb debugging option
Hello, i have a big problem. Since 7 days, i have a yotaphone 2 yd201 international.
I had installed cozmo-app wich was used much accu and cpu lagging. After 2 days i installed whatsapp.
And after some hours, the Phone was freezed. It loading 30 times in a loop. Sometimes it comes the yota animation and freezed, sometimes a graphic bug like color stripes over the android logo
i have flashed the firmware original. but no solution.
izanagi23 said:
Hello, i have a big problem. Since 7 days, i have a yotaphone 2 yd201 international.
I had installed cozmo-app wich was used much accu and cpu lagging. After 2 days i installed whatsapp.
And after some hours, the Phone was freezed. It loading 30 times in a loop. Sometimes it comes the yota animation and freezed, sometimes a graphic bug like color stripes over the android logo
i have flashed the firmware original. but no solution.
Click to expand...
Click to collapse
Try the recovery and do a wipe: dalvik/ART
Hi keeper. I had make a wipe reset & cache. nothing happens.
izanagi23 said:
Hi keeper. I had make a wipe reset & cache. nothing happens.
Click to expand...
Click to collapse
so maybe it's more serious, in that case follow this thread:
http://forum.xda-developers.com/yotaphone-one/help/y2-bootloop-to-recovery-t3509883/page1
Ideas
Hi,
I had the same problems and found a solution:
When it is in the bootloop and does not go into downloading mode:
Try starting into recovery (Vol up + Power) and choose power down. Then try to go into download modeTry flashing cn 321a as mentioned earlier, enable USB debugging etc.When you try to flash the Rom of your choice
close all running applications on your computer. They may take memory. After doing this the flashing took longer for me and worked fine.
So i flashed TWRP with Odin on my Galaxy S5 (first time I flashed anything on it). Rebooted and then everything was normal, transferred the lineage nightly and gapps and then tried to reboot into recovery... then nothing! It vibrates, i get fb messages, it works but no screen, not even a samsung boot screen at the very beginning .
I've tried all the trick on the many pages of google about BSOD but it always falls back to: Send to your carrier. Welp, I'm in Canada and this phone is European... so no sending it back anytime soon.
Could I flash through Odin something to make it work? Is there another way to make it function? I'm gonna keep looking but if anyone can help me out... Thanks!
Follow these steps:
1 - go to offical TWRP site
2 - find your correct Galaxy S5 model (there are a lot of models, simply check number: SM-G900F is different than SM-G900FD)
3 - download latest version in img.tar format (twrp-3.2.1-0-klte.img.tar)
4 - turn off phone
5 - put phone in "download mode" (power + home + vol-)
6 - connect phone to PC (be sure you have latest drivers)
7 - start Odin with Admin privileges (right click -> Run as Administrator)
8 - click on AP or PDA and select img.tar file you downloaded
9 - in "Option" tab select ONLY "Auto Reboot" and "F. Reset Time"
10 - be sure that in ID:COM tab you have a value
11 - click on "Start" and wait
If you done it correctly, phone auto restart itself. Turn it off and turn on in "recovery mode" (power + home + vol+), wipe all and install first the ROM you want, and then Gapps. Remember that you need a su add-on to gain root access in certain ROMs.
EDIT: if not working, try to flash stock ROM for your model.
This happened to me, too. I tried flashing TWRP a million times with Odin and it would boot into stock recovery. Then I found another version of TWRP for my tablet(or so it said) and when I flashed it and it rebooted, the screen was gone. Same thing: I can hear it at the Android setup screen, there's just no screen. I've got a Galaxy Tab A [T290].
Any ideas would be great.
I'm new to rooting phones and stuff. So I tried to root my tab and followed a guide that told me to download Odin v3.11 and enable USB debugging in my tablet and I did. And as soon as I flashed twrp and tried to restart my tablet, the screen went blank. I tried opening it by holding the power its just blank. I tried plugging it in my computer and I think it recognizes the tablet because it makes the sound the computer makes when you plug a usb. But Odin won't recognize it.
Solved the problem.
Anyway as I said I want to root my phone but when going to twrp the screen is just blank. Any suggestions?
Hi all....
I've same problem too.
After try flash with Odin 3.11 and p355 firmware, after process clear, and Odin show "PASS", my phone turn off it self, and never come back again. Display just blank, so I can't go to download mode or recovery mode.
Try push power button for long time, still no respond. But if push many time home, vol down/up tab still shaking, but display just blank.
Any one here can help me how to solve my problem.
Note:
Tab is brand new, but has been lock for Prudential insurance.
Thanks.