Related
Any ideas?
I tried to flash a new SPL.. probably a stupid idea on my part, and it loops at the G1 screen.
I was going to install the SPL, then install SuperHero v2
I press power+home to go to recovery, and it does nothing. I try to access bootloader, and it does nothing.
Is it officially bricked?
is the phone plugged in when you are trying to do this?
if not, then try reflashing your rom.
mrcrs said:
is the phone plugged in when you are trying to do this?
if not, then try reflashing your rom.
Click to expand...
Click to collapse
Well I can't boot into recovery mode =/
So I can't reflash a rom
It just stays at the G1 screen
Did you verify if you had a pvt board or not?
can you get into bootloader mode?
I did verify, and it had a compatible board. I believe it was PVT, but atm I'm pretty pissed that I can't remember. I just know for fact it was compatible, otherwise I wouldn't of even thought of going through the process.
To recap:
I cannot get into bootloader.
I cannot get into recovery mode.
It stalls on the G1 screen. It apparently is stuck in a loop.
I can get to the blue LED thing though. (Which apparently is worthless)
This is lame. (I'm an idiot)
Unless some miracle can happen, which I am very much hoping, I am going to declare it bricked.
Which means I'll have to either use my lame iPhone, or ditch out $200 for a new G1.
okay i'm sure you did this already but i gotta ask, did you try removing the battery for a few seconds then try booting into recovery?
Sooooooo....
You had a compatible board, but did you think to update to the latest Radio....?
If you didn't have the latest radio then that's what bricked your phone..
If you did then your phone shouldn't be bricked......
Did you have the latest Radio?
mrcrs said:
okay i'm sure you did this already but i gotta ask, did you try removing the battery for a few seconds then try booting into recovery?
Click to expand...
Click to collapse
Yeah, and no avail
I think I'll just remove the battery for the rest of the day, and pray that somehow it'll fix. lol
imnothimm said:
You had a compatible board, but did you think to update to the latest Radio....?
If you didn't have the latest radio then that's what bricked your phone..
If you did then your phone shouldn't be bricked......
Did you have the latest Radio?
Click to expand...
Click to collapse
Ah!
Found the culprit. You see, there aren't any guides that I could find that properly told me which order to do it, and how.
I thought it was SPL, then Radio, then ROM. But it's actually Radio, SPL, then ROM.
Well then I do have a brick. My first brick, woo.
Yup
Your Phone is indeed bricked...
HTC will repair it for 150...
Sounds like your only option
so if it was the saphirre or H's special spl you tried to flash but didn't upgrade the radio, then yeah... you most likely got a brick.
but what makes me wonder is that when i flashed H's special spl, i ran into the constant relooping of the g1 splash but i was still able to get into recovery mode. so i just reflashed my rom, and all was gravy.
They really will? Because $150 is $50 cheaper than I can get a new G1 (from craigslist)
But, if it's still a new phone, does it come with a 1year warranty from T-Mobile?
I know on my AT&T Tilt, at one point I messed it up, and they have a Warranty store locally, and I took it in and they tried to fix it but they couldn't, so they replaced it. Does T-Mobile have one of these anywhere?
hmmm
I sent mine into T-mobile and they replaced it for free, although I'm about 98%sure you need to have an account with T-Mobile for them to do that...
I'm pretty sure HTC is your best bet atm
Though I do have a t-mobile account. My mom and dad are with t-mobile, and I am with at&t.
if you are with tmo, then just call them.
Alright well I'll give them a call.
Maybe they will be nice
Well this sucks lol.
T-Mobile wont replace the phone because it's not purchased by me. It was purchased by someone locally on craigslist. So I would have to get in contact with that person and have them get me an exchange.
Yet another reason why I dislike T-Mobile. AT&T will just verify the IEMI, and if it shows that it's less than a year, or still under warranty, they will replace it.
I guess there's no failsafe way of fixing the G1, even after you messed up the first way to fix it?
I know in GPS navigators and stuff like that have their own failsafe mode to fix a brick. Then will force itself to connect to a computer so you can edit the whole filesystem.
Or a way to replace the system.. aka JTAG.
Recovery mode has to be accessed after a bootup. How stupid
Hey guys,
Few of you in the cyanogenmod irc room the other night might have recalled me totally bricking my t-mobile mytouch by pulling the battery after a reboot... dumbest thing I have ever done. I consider myself a fairly knowledgeable linux geek, but unfortunately I panicked and did the worst possible thing, pulling my batt and completely bricking my phone.
I was installing the 4.1.999 cyanogen mod. Phone was so toast it wouldn't charge. Status led's wouldn't work, it was 100% toast. Fortunately I was able to have it replaced and would like to try again in a day or so.
Here is a video showing exactly what I did, please excuse the length of the video it goes from start to finish, backing up and flashing everything, up until the point where I pulled the battery. I'd love to know what I did wrong, so I can try again!
View the video here on vimeo -> http://vimeo.com/7022688
Ok, here's what you did wrong:
The first steps are good... You've installed the 1.6 update, then applyed the cyanogen rom... After that I've seen that it was installed a new radio... That might have killed your phone...
At least that appears to be the problem... But why a new radio was installed, no idea... (I don't think you did it on purpose)...
the phone you have there is a magic not a dream.For a start that dosnt help!! Other than that i think yiou have put Dream radio on the device, It not being a dream is the problem as when it detects its the wrong radio the phone goes into a safe mode where it wont turn on to save breaking it.
HTC might fix it under warranty as they did me but it WILL come back with perfect spl on.I have flashed the wrong radio on 2 phones yes 2! now i learn from my mistakes Oh and when/if it gets fixed and you bypass perfect spl, You cant put any ROM Other than donut based ones so no hero takes the fun out of flashing
All bricks I've seen are because you guys install new( in most cases wrong radio- from different phone or MotherBoard version) or changing SPL (exception: people with perfect SPL). I'm asking WHY you do this , WHAT FOR ? Putting different rom /rooting etc does NOT require changing anything and is simple as bread and butter, and you CAN'T damage the phone !! Sorry to see this I'm not 100% sure but it looks like you have flashed with wrong radio. As my predecessor said I think only HTC can fix it... To all people DO NOT TOUCH SPL AND RADIO IF YOU JUST WANT TO PUT HERO ROM OR ROOT THE PHONE (exception ppl with perfect SPL)
i accidently flashed the radio for ION on my 32A last week. got my phone fixed under warranty thank god. but i got the perfected SPL.
if you do get the perfected SPL, you dont really need to change your SPL to flash stuff on your phone.
just replace your recovery using the recovery flasher apk a.k.a the one click root.
reboot to recovery, flash a new ROM that is rooted.
then using the adb shell method, flash a new recovery permanently to your phone.
i have had no issues using that method since i got my perfected SPL.
whalesalad said:
Hey guys,
Few of you in the cyanogenmod irc room the other night might have recalled me totally bricking my t-mobile mytouch by pulling the battery after a reboot... dumbest thing I have ever done. I consider myself a fairly knowledgeable linux geek, but unfortunately I panicked and did the worst possible thing, pulling my batt and completely bricking my phone.
I was installing the 4.1.999 cyanogen mod. Phone was so toast it wouldn't charge. Status led's wouldn't work, it was 100% toast. Fortunately I was able to have it replaced and would like to try again in a day or so.
Here is a video showing exactly what I did, please excuse the length of the video it goes from start to finish, backing up and flashing everything, up until the point where I pulled the battery. I'd love to know what I did wrong, so I can try again!
View the video here on vimeo -> http://vimeo.com/7022688
Click to expand...
Click to collapse
after applying the 4.1.999 update you pressed the trackball to reboot your suppose to hold the home key while its rebooting on that step till the mytouch screen shows up also you need to wipe the ext. redo the last step then the my3g should be fine in other words reflash the cyanogen
u install wrong recovery
Install instructions for an HTC Magic (32B ONLY!!!)/ION/MyTouch3G
Same as above if you are using CM-Recovery 1.4.
OR
Same as above EXCEPT step 2
Download HTC ADP 1.6 DRC83 http://www.androidspin.com/downloads...ooted_base.zip
*You have to manually reboot MT3G and hold home.
he can use the ra recovery image it works because i used it on mine
Turns out I used the wrong recovery image before doing the cyanogen flash.
I followed this guide on my second phone (swapped out my old white one for a black mytouch) and am running 4.1.999 right now - http://forum.xda-developers.com/showpost.php?p=4666075&postcount=282
It would appear that I dropped the incorrect SPL on my phone when following this guide (http://android-dls.com/wiki/index.php?title=Amon_Ra_recovery_tool). I used the one that was mentioned, and now the phone no longer fully boots. I can still get into fastboot/hboot, and technically into recovery. The screen is not displaying properly on either mode, leaving hboot difficult to read, but useable, and recovery without a UI (the MyTouch splash stays there, but the phone goes into recovery mode).
I did manage (somehow) to get CM-Recovery 1.4 flashed to it, and that is how I managed to install the SPL. I had the 1.33.0006 SPL prior to bricking.
I also tried fastbooting and it is no longer blocked.
What are my options here? Am I boned, or do I have a way out of this?
Thanks in advance for the help.
If you have a SD Adapter try to add any ROM to your SD and flash it. I did that earlier, and it worked. If you can see the recovery image screen then its not fully bricked. Good luck.
I can attempt to do that. Thing is, I'm blind once I hit the recovery screen. Can't see jack because the video is all messed up.
Should I attempt to keep flashing SPLs till I find one that works? Or is that a very, very bad idea? Given, that, is there a way to go back to 0006?
Thing that sucks is that I just got this thing yesterday and got a little overzealous with the rooting. Whoever helps me through this is definitely getting a case of beer or something ><
---
I guess what would help me the most at this time (I think) is suggesting which SPL I should drop on the phone (2004 is now on there), or helping me get 0006 back on there or something of that nature.
Can I control Recovery via adb? If so, awesome. But can I push an SPL via adb, that is the question?
Also, since I was somehow able to get a different recovery on the phone, do I still need to deal with the goldcard and all in order to install a different ROM?
Hi guys, I've a problem with my HD2 and maybe one of you has an idea of how to fix this, because I really don't want to send it in for a repair
Anyway, my phone decided to refuse to boot out of nowhere. When it happened I had Artemis v9 or v10 installed on it. The funny thing is that I didn't flash anything when the problem occured.
Whenever I start the phone I only get a white screen. Luckily, I can still access the bootloader, even thought that didn't help me until now.
my guess is that the Radio is somehow corrupted, because when I try to flash a new one I get the error saying "Radio_V2 failed" and "Update Terminated". Not even flashing with task 29 works, because I get a "Error 270" and the phone restarts itself after like 4% of flashing.
I'm really out of ideas, I tried to flash a lot of different roms and radios, even the rom that the HD2 came shipped with.
flanders3 said:
Hi guys, I've a problem with my HD2 and maybe one of you has an idea of how to fix this, because I really don't want to send it in for a repair
Anyway, my phone decided to refuse to boot out of nowhere. When it happened I had Artemis v9 or v10 installed on it. The funny thing is that I didn't flash anything when the problem occured.
Whenever I start the phone I only get a white screen. Luckily, I can still access the bootloader, even thought that didn't help me until now.
my guess is that the Radio is somehow corrupted, because when I try to flash a new one I get the error saying "Radio_V2 failed" and "Update Terminated". Not even flashing with task 29 works, because I get a "Error 270" and the phone restarts itself after like 4% of flashing.
I'm really out of ideas, I tried to flash a lot of different roms and radios, even the rom that the HD2 came shipped with.
Click to expand...
Click to collapse
What radio (if any) have you flashed? Check the ROM's dedicated thread you want to flash and see if the radio is compatible.
Im betting you've flashed the wrong radio
take the rom it was shipped with, name the nbh file to LEOIMG.nbh, copy it to your sd card and go into bootloader.
it will flash your old rom and should overwrite the old radio.
DN41
I installed Radio 2.06.51.07, which was recommended as far as I know.
I tried to install every "official" rom that I could find, but no matter if I apply them via SD card, USB or .exe, the install never finishes.
Tried to install just the OS without a radio and that worked, so I'm almost sure it is somehow radio related.
Now the problem is that I can't even send it to T-Mobile, because I there is no way to get rid of HSPL. BTW, it's the german T-Mobile we are talking about, not the US one. Is there a chance they won't notice the HSPL...?
so flash this one over sd-card: german t-mobile 1.72
what about performing hardreset? does the phone boot?
DN41
Tried flashing the TMO rom, but no luck either
Hard reset is strangly fast (only takes like 7 seconds) and only gives me a white screen after reboot. Apperently the HD2 shows me that HSPL is intsalled in the bootloader, but I can't change the SPL...
Already tried HSPL2, but no matter what option I choose, my bootloader always stays at 1.42 HSPL.
Edit: I would like to post pics of the error I get when flashing from the sd card or the bootloader screen, by the board rules don't want new users to post links.
djchubbs said:
Im betting you've flashed the wrong radio
Click to expand...
Click to collapse
any way to repiar radio side as flashed wrong radio ??
flanders3 said:
Tried flashing the TMO rom, but no luck either
Hard reset is strangly fast (only takes like 7 seconds) and only gives me a white screen after reboot. Apperently the HD2 shows me that HSPL is intsalled in the bootloader, but I can't change the SPL...
Already tried HSPL2, but no matter what option I choose, my bootloader always stays at 1.42 HSPL.
Edit: I would like to post pics of the error I get when flashing from the sd card or the bootloader screen, by the board rules don't want new users to post links.
Click to expand...
Click to collapse
same happen with me,,,
flanders3 said:
Hi guys, I've a problem with my HD2 and maybe one of you has an idea of how to fix this, because I really don't want to send it in for a repair
Anyway, my phone decided to refuse to boot out of nowhere. When it happened I had Artemis v9 or v10 installed on it. The funny thing is that I didn't flash anything when the problem occured.
Whenever I start the phone I only get a white screen. Luckily, I can still access the bootloader, even thought that didn't help me until now.
my guess is that the Radio is somehow corrupted, because when I try to flash a new one I get the error saying "Radio_V2 failed" and "Update Terminated". Not even flashing with task 29 works, because I get a "Error 270" and the phone restarts itself after like 4% of flashing.
I'm really out of ideas, I tried to flash a lot of different roms and radios, even the rom that the HD2 came shipped with.
Click to expand...
Click to collapse
I have exactly the same problem.
I believe radio hardware of my HD2 has failed.
This is not related to flashing an incompatible radio, as I have flashed 1.66 official ROM about three months ago and had no problems until now.
I got the white screen, when phone was in my pocket.
Not possible to update radio, update fails with "Radio_V2 failed" and "Update Terminated".
Not possible to flash any rom, flashing fails when it comes to radio part.
MTTY didn't help as well.
I see no way but to send it back for repair.
Hope they dont realize HSPL, as it is also not possible to change SPL right now.
Hi everybody, i am facing the same issues with my knew HD2. The fact is that i received it yesterday, while trying to flsah ENERGY ROM ..i flashed also the radio .. now got the white screen with the HTC green logo, and no way to hard reset ... phone doesn't boot, can't do anything !!!!!! volume + and volume - doesn't work !!! any idea any solution ?? I am about to try flashing with the memory card but no idea if it will work, im not sure cause even the HSPL doenst appear ... anu idea ?
I've got the same problem
Mine is a Telstra (Australian) HD2, and I've been using it for about 3 weeks fine. Then a few days ago, I took it out of my pocket, and it's dead. With my one, most of the time I just get a blank screen (no HTC), and most of the time it's slightly yellow.
I'm having the exact same problems, and have done everything suggested on this page, and others. I can't send mine back either.
I'm guessing since no one's replied, there's not really a solution to this.
If it is a failed radio, I'm amazed how easily they fail, and how many people seem to have this problem.
I have the same problem today. Anybody help?
anakin621 said:
I have the same problem today. Anybody help?
Click to expand...
Click to collapse
i had the same problem with my Telstra T9193. i couldnt find any solutions so its on its way back to australia under warrenty.
I had a similar problem to this, though it appears I just fixed it. I can only imagine it's just a temporary fix though, as I previously managed to get it working and running Android only to white screen again the next day.
I did a hard reset and now it loaded the white HTC screen and nothing else. I tried installing a stock ROM from the MicroSD card and got the same "Update Terminated Update Fail" error because of the Radio. Retried the update about 3 times, and it eventually installed fine.
same here, i reloaded a stock from sd to relock it, which i highly recommend for anyone having this problem - in case it needs to go for repair and it just happens to boot..it took quite a few tries to have a proper flash and it booted only a few tries afterwards and then went back to only booting the white htc screen. so frustrating. and unfortunately for me it has to go back to australia for warrenty and will likely take ages to get back
I was stuck at multi color boot screen after hard reset. Tried multiple roms.
Solution: Use the 2.13 rom from here. Worked thankfully!
forum.xda-developers.com/showthread.php?t=655653
After being looooong on this forum, I finally got my first bricked HTC. I got all the same problems, white screen, no way to get HSPL gone, and no update via SD possible, no ROM update via USB in bootloader and no radio update possible...
Anybody knows how much it costs if I send it to HTC and they find yout it has been HSPL-ed?
Next with the bricked HD2
So definitely I´m in the same situation.. I have unusable SMARTPHONE!!
Even worse, because in my case i have no chance to send it to warranty repair - I was too disparate and curious so I opened my HD2 to look for an backup battery to erase everything that could have resist my countless tries to reflash, hardreset, flash RADIO, flash ROMs...
At the begging was the same (btw the same is still) : I took my phone and it did´t answer for waking it up. So I pressed red button to (soft)reset it. But it booted only to white screen (not the HTC one but "pure" withe w/o logo, w/o software info but with slightly yellow hue)
This was almost whole week ago... During that time I tried almost everything (I don´t have gold card - since I can´t get CID of any SD card I´m not able to have one and have installed HSPL 2.08 I´m ABLE to FLASH any ROM - even successfully reflashed cooked ROM via SD Card.!!) and the answer for me is probably some hardware problem....
-rr-obin said:
So definitely I´m in the same situation.. I have unusable SMARTPHONE!!
Even worse, because in my case i have no chance to send it to warranty repair - I was too disparate and curious so I opened my HD2 to look for an backup battery to erase everything that could have resist my countless tries to reflash, hardreset, flash RADIO, flash ROMs...
At the begging was the same (btw the same is still) : I took my phone and it did´t answer for waking it up. So I pressed red button to (soft)reset it. But it booted only to white screen (not the HTC one but "pure" withe w/o logo, w/o software info but with slightly yellow hue)
This was almost whole week ago... During that time I tried almost everything (I don´t have gold card - since I can´t get CID of any SD card I´m not able to have one and have installed HSPL 2.08 I´m ABLE to FLASH any ROM - even successfully reflashed cooked ROM via SD Card.!!) and the answer for me is probably some hardware problem....
Click to expand...
Click to collapse
I'm sorry, I just sent my to the repair center. Hope they will repair it under warranty. Otherwise it will cost me 100 Euro, just to find out I have to pay for the repairs. Then I can choose to let the device there (then I don't pay 100 euro) or let the device ship back (I pay 100 euro for a brick) or let them do the repairs which they will say how much it will cost on top of that 100 euro ..... stress ....
Birger said:
I'm sorry, I just sent my to the repair center. Hope they will repair it under warranty. Otherwise it will cost me 100 Euro, just to find out I have to pay for the repairs. Then I can choose to let the device there (then I don't pay 100 euro) or let the device ship back (I pay 100 euro for a brick) or let them do the repairs which they will say how much it will cost on top of that 100 euro ..... stress ....
Click to expand...
Click to collapse
Check this thread... unfortunately it wouldn´t be quite easy whith the service repair...
_JuSteR_ said:
...
With the radio bricked there are only two things you can try to do:
1- You can go on using your hd2 without updating the radio. Try to download a rom without radio and install it, or ask a cook to prepare a rom (you can try an official rom if you want to recover the original SPL) without radio for you.
2 - Do what I did and sell the phone as bricked, because there's no way to unbrick radio system. I tried to save my HD2 by recovering the original SPL and sending the phone to the htc customer service. I got the phone back after 2 months and it was still radio bricked
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=618084
upload a pix of your bootloader screen,I had similar kind of problem.I 've been through a lot of hardship dealing with the that.Maybe i could help u a bit.
Hi, after hours of researching to find the problem, i cant find it so as my last resort i will ask the mighty forums if there is anything they can do about it.
The problem is that its stuck in a boot loop, i can get in to bootloader and Hboot.
When i press to go in to recovery its just goes to the HTC logo and stays there.
When i try to do a factory reset same thing happened.
Anyway, the facts.
Its a DHD it used to have leedroid latest as rom, atm i have no idea it is supposed to be 1.32 stock rom for rooting and RADIO-26.14.04.28_M, kernel was also leedroid recommended but i guess that also is 1.32 stock.
It was ENG S-OFF but then i tried some PD98IMG and it changed to SHIP S-OFF
Things that i have tried.
Tried different PD98IMG to get the recovery working but nothing same thing happened there.
Tried patched/flashed the recovery part only with no luck.
Tried to get into recovery through pulling the battery inserting the usb and then inserting the battery again, no luck.
The odd thing is when i try to charge the phone and the led goes orange and when i pull the usb out it stays orange, it should turn off.
I suppose i ****ed something over but i have no clue of what that is?!?
Help would be most appreciated
I'm suggesting everyone to give this method a try although i have no experience with it but since it can be used to recover using computer i believe recovery isn't necessary here so that you can recover the firmware using the PC.
Hope this helps
shad0wboss said:
I'm suggesting everyone to give this method a try although i have no experience with it but since it can be used to recover using computer i believe recovery isn't necessary here so that you can recover the firmware using the PC.
Hope this helps
Click to expand...
Click to collapse
Done and failed, same problem no difference what so ever.
SHIP S-OFF is OK!! U got it m8!
If you want to use your own Image do it within this way:
1. Flash this: http://www.multiupload.com/FKJ8B7Q0QM
and after this:
2. Flash this: http://www.multiupload.com/AURLLESU5V
And enjoy it! I don't know why the PD98IMG is not working on your device so I recomend to flash the RUU. Within the RUU you will also get the latest firmware for phone and wifi and so on. It's not a need, it's a must!
The 2nd ROM is same as above but it's ROOTED and contains the 4ext Recovery which will give you the option to flash whatever you want.
BUT!!! This ROM's are ORIGINAL. If you want to use a CUSTOM ROM I would recomend you will format your device by the 4ext Recovery or you are using the FULL WIPE 1.5.
Regards!
Sorry for the insane delay.
That did not work either, anyone else have any idea what to do, installing through PD98IMG.zip files seams not to work, will at this point do anything.
I'am a student so buying a new one is out of the question.
I tend to have to see things to understand them more. Maybe other people are similar. Is it possible you can video the process, put it on YouTube and some of the experts here can see it and talk you through it?
Grant Barker said:
I tend to have to see things to understand them more. Maybe other people are similar. Is it possible you can video the process, put it on YouTube and some of the experts here can see it and talk you through it?
Click to expand...
Click to collapse
Dude, I plus 1 this comment.
Doing exactly that has helped me in the past too.
Well, i am here again with some videos this time, dont really know if it will explain anything but here goes nothing.
youtube.com/watch?v=cHA-k6SadoE
Just a simple start to show what the hell is wrong with it.
youtube.com/watch?v=squwhiGNM3s
Here's me trying factory reset but failed, stuck at the same place as before.
youtube.com/watch?v=aZF1ALz0Z-w
Here is where i go into fastboot, just to show that i can do it and then back again to try recovery, same problem...
Anymore info you need, next time i will answer much faster, anyway there the problem it gets stuck on HTC logo forever, no restart no nothing...
ithen said:
Sorry for the insane delay.
That did not work either, anyone else have any idea what to do, installing through PD98IMG.zip files seams not to work, will at this point do anything.
I'am a student so buying a new one is out of the question.
Click to expand...
Click to collapse
when you flashed PD98IMG.zip does it give you a cid error?. If this is the error then a gold card needs to be made for your device first, then you flash the RUU.
Back again.
No CID error, its skips something called TP when i try to flash it.
I can use any simcard, its an unbranded phone i believe.
And also if it is to any help, when i plug my charger in the phone and then back out again, the little orange led keeps emitting light, as if it stills charging.
My English is not very good.
I want to know what did you do for it before its stuck in a boot loop?
You can get into HBOOT and connect the phone to the computer,then try to run RUU.Before you do this,make sure you have make golden card.
Try another pd zip..i came across a few corrupt ones,the answers in this site somewhere alterbatively google the sentence you want the answer to..or the key words,if the systems still working theres a 98% chance youll get it going boot loops from what i see are just a file or something causing chaos..once its gone voila.
Good luck
Sent from my Desire HD using XDA Premium App
Enter hboot and paste exactly what it says in there.
SHIP AND ENG don't matter as long as it's S-OFF. If you can't access recovery and if you're unable for some reason to flash a PDimg, download AAHK and use it to unroot. That will hopefully get you into the stock ROM and S-ON of course.
Use AAHK again to root. You will still have access to your stock ROM.
Now here's the tricky part. If the phone won't boot at all that probably means there's nothing to boot at all. Happened to me a lot of times. If you can still get into hboot then don't panic. See if AAHK will help you out.