my phone is stuck on the bootloader screen, instead of saying usb all its saying is SERIAL. I cant get it to connect to my computer to flash anything becaus it is not registering on my computer, is there any way past this. i have done hard reset but still coming back to the same screen. It is showing CortullaHSPL as being warm when usb is connected to computer. What can I do please help.
Related
Hello,
this is what the problem is, the power button doesnt bring it back to life. i do a soft reset, it says press zero to clear, i do that it doesnt work. then i do a hard re-set and it shows 'serial', i plug in the usb and it changes to USB (think that's what is called the boot loader'.
now i ran teh exec official firmware, it managed to update it onces but after that i did a soft reset and it didnt come to life. i repeated that process again but this time the firmware didnt even manage to communicate with the device as it said unknown usb device. and then i got an error 101, connection error
any ideas whati can do to make sure it gets restored, i am really going nuts now!!
Same Problem
I am having the same problem with my 02 exec. My phone keeps on being in bootloader, I have tried mtty and I don't have usb connection. Hmm I have tried uni_exitbootloader ,but it tells me that it can not open my usb port. Which sucks. Truely and I am stuck. I am running vista. So I am stumped because I don't know what else to do.
Me too
I am stuck on bootloader page the one that says USB at the top and V1.00 at the bottom. I have Vista so can not use mtty or the other one. I have turned off the USB on Windows Mobile thingy from Vista like activesync. I can get the white screen to show O and X for either factory reset or exit. And I have tried the bootloader screen as noted above. So can anyone help?
i got it working for 2days and then when i was on wifi, it crashed again and wont start again, i get to serial/usb mode of bootloader and also to hard reset when i press 0 to clear everything. but then it doesnt start again.
i thought it was something to do with the battery so i put in a new battery but that still doesnt help.
can someone send me a link to mtty and what to use it. i shall give that a try again.
thanks
mines just still stuck
same im still stuck in boot loader wont budge from he bootloader screen with serial v1.00 on cannot connect via usb as the connection broken i use a extrunal battery charger and got serveral batterys any help yet?
I've got a couple of strange problems with my mogul - anytime I need to reset it, it goes into bootloader (both soft and hard resets). However, If I connect it via USB to my pc, the reset will work.
The second problem is a USB connection to the PC only charges the mogul, the pc doesnt actually recognize it (it doesnt give the windows device connection sound)- so i cant flash it to try and solve the first problem. It also isn't recognized when I plug it into USB while in bootloader mode, I just get the "Unrecognized USB device" error in XP and Vista on two different computers. It might be worth noting that I get the USB device connection sound when i reboot the phone, then the "unrecognized usb device" error, then the disconnect sound as the boot finishes and windows mobile loads. I've tested the cable with other devices and tried multipile cables, so I dont think thats the problem
Any suggestions?
Ok, I got the USB working but nothing will keep it from going into bootloader on reset if it isnt connected to my pc. I've reflashed and hard reset to no avail. no one has any suggestions?
I had this same problem w/ my fiance's mogul... as far as i know there's nothing you can do but take it to sprint and get a replacement... and just as an fyi.... i never modded her phone... it was completely stock!
With no warning, my phone froze today (it's done it a few times, but a soft reset's fixed it) and nothing, including a hard reset, seems help.
I can get into bootloader and hard reset screens, however it gets 'stuck' on the Orange splash screen. The numbers in the corner flash up for a split second and then disappear.
I haven't been flashing ROMs, I just picked it up and it stopped working. I have tried the instructions here (http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery) but the computer can't connect to it (both with Active Sync on or off and Active Sync USB connection on or off)
Can you make any suggestions?
Thank you!
When you go into bootloader, do you see USB on the screen? Wot are your IPL and SPL?
Im surprised flashing with Jesterz did not work, that was my first step in recovering mine and it worked
When you tried this, did you unplug all other usb from your PC? try another cable? sounds daft but only one usb port out of 4 worked for me. Give some more info on what you did and what happened?
Okay, so I've already done a quick search of the forums and haven't found a situation close enough to mine to remedy my problem.
I was trying to update my ROM. I was flashing it when the progress bar stopped around 13%. After that, When I tried recovery, it seemed to stop detecting the phone at all. That is when I started looking around for other fixes.
Phone will start up into boot-loader(the tri-color screen), which shows
HERM100
IPL-1.03
HERM100
SPL-1.11
Now the main problem is that none of the updaters work because my computer cannot even detect that the phone is plugged in. When I try to plug it in, the computer shows "Unrecognized device". I use Windows Home Premium.
I've also tried MTTY. There is no USB option from the dropdown menu. I've killed Windows Mobile Device Center before trying this option.
Help me guys! What should I do?
http://forum.xda-developers.com/showthread.php?t=420135
see post 6 and later
I own an LG G2, i recently got this phone yesterday from a person on craiglist. Don't worry i didn't pay him i gave him my older phone i dont use anymore. SO This phone is practically stuck in Firmware Update (As i read that post) , i spent about a day and half figuring it out and what happens is that.
I CAN get into recovery its TWRP v2.7.0.0 by Turning off the phone first and then Holding Vol UP, Power, Vol Down at the same time until the LG Logo comes up and then i am still holding them down, and it says Recovery Mode please wait and bam TWRP.
But heres the problem i can't mount my OTG and i can't ADB Sideload. So what do i do from here?? this guy rooted this phone and soft bricked it i think? and he wiped the phone but i also did when i had the chance and wiped it completly via recovery.
The only way i got into "Download Mode" / "Firmware Update" was to take the back cover off and unscrew a few screws on the side and unclip the battery for a few seconds and then plugged it back in and then I held the VOl UP button and plugged my USB into the phone and the other end is in my PC. My phone says "Download Mode please wait" and then prompted with the Firmware Update screen. BUT my pc doesnt detect the phone whatso ever and i've already installed drivers and etc from this forum ( http://forum.xda-developers.com/showthread.php?t=2432476 ) its the 2015 method that i downloaded.
so what do i have to do, i havent tried using different usb cables, the port seems fine to be plugged in since in TWRP it says 84+ so i meant its charging right? help me out guys idk what else to do or flash or anything.
IAmTechFreq said:
I own an LG G2, i recently got this phone yesterday from a person on craiglist. Don't worry i didn't pay him i gave him my older phone i dont use anymore. SO This phone is practically stuck in Firmware Update (As i read that post) , i spent about a day and half figuring it out and what happens is that.
I CAN get into recovery its TWRP v2.7.0.0 by Turning off the phone first and then Holding Vol UP, Power, Vol Down at the same time until the LG Logo comes up and then i am still holding them down, and it says Recovery Mode please wait and bam TWRP.
But heres the problem i can't mount my OTG and i can't ADB Sideload. So what do i do from here?? this guy rooted this phone and soft bricked it i think? and he wiped the phone but i also did when i had the chance and wiped it completly via recovery.
The only way i got into "Download Mode" / "Firmware Update" was to take the back cover off and unscrew a few screws on the side and unclip the battery for a few seconds and then plugged it back in and then I held the VOl UP button and plugged my USB into the phone and the other end is in my PC. My phone says "Download Mode please wait" and then prompted with the Firmware Update screen. BUT my pc doesnt detect the phone whatso ever and i've already installed drivers and etc from this forum ( http://forum.xda-developers.com/showthread.php?t=2432476 ) its the 2015 method that i downloaded.
so what do i have to do, i havent tried using different usb cables, the port seems fine to be plugged in since in TWRP it says 84+ so i meant its charging right? help me out guys idk what else to do or flash or anything.
Click to expand...
Click to collapse
I think the methods leave out that you need to change your phone to com port 41 on device manager > ports in order to be detected. Then you need to unplug it and reconnect to computer when the program shows waiting for device, with the phone in download mode already.
Also, to get to recovery you hold vol down and power, when the LG logo comes up release power and hold it again until the reset screen comes up.
To get to download mode you turn the phone off then hold up while plugging the USB cord in with it connected to pc... This launches download mode.
Sent from my LG-VS980 using XDA Free mobile app
Yoinx said:
I think the methods leave out that you need to change your phone to com port 41 on device manager > ports in order to be detected. Then you need to unplug it and reconnect to computer when the program shows waiting for device, with the phone in download mode already.
Also, to get to recovery you hold vol down and power, when the LG logo comes up release power and hold it again until the reset screen comes up.
To get to download mode you turn the phone off then hold up while plugging the USB cord in with it connected to pc... This launches download mode.
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
Well you see man , I cant change anything in Device Manager since my phone isn't being detected. It didn't install drivers fully fully since my phone isnt recognized. Even in TWRP or "Download Mode/ Firmware Update" Nothing happens no drivers installing or anything even but it does boot it up to that point....and its just normal boot up i see the LG logo and my led goes from green to blueish in a smooth transition and it doesnt stop until i turn it off. The method i got into recovery is holding all those buttons down its not a problem for me to get into it. I also have another problem it doesn't seem to want to mount my usb otg by samsung.
what do i do
So i tried the otg route but I can't mount it. I have everything connected and once I go into recovery to mount usb-otg, nothing happens.
I just need some way to get a ROM.zip in my phone
Computer does not recognize my phone.
Stuck at LG logo unless I enter recovery.
Sideload doesnt work.
OTG doesnt work.
I've tried at least 4 different guides with no luck.
Why don't you manually install drivers from online?
ive tried
tzzeri said:
Why don't you manually install drivers from online?
Click to expand...
Click to collapse
ive tried that already and it doesnt list anything from the LG folder.
I realized the phone will say start the adb sideload feature. so, when i put the "abd sideload file.zip" command on my pc i just wait a few minutes and it says daemon not running on port 5037 and then start successfuly and then error :device not found.
it can seem to reognize my device wether its in recovery, or download mode or fastboot mode.
Try again in other pc that has never been conected to an LG Phone before. It can perfectly be a conflict with drivers installed in the OS.
I've tried man
AFter i cleaned the usb port in one of the chats or forums, i waited a day ovbiously without turning on the phone and cleaned the usb port with alchohal and a q tip and i plugged my phone into my computer and my PC detected something but it only says "Unknown Device" everytime no matter what pc i use it says that. nothing else. but before that none of my pcs would detect theirs a phone plugged in at all.
IAmTechFreq said:
AFter i cleaned the usb port in one of the chats or forums, i waited a day ovbiously without turning on the phone and cleaned the usb port with alchohal and a q tip and i plugged my phone into my computer and my PC detected something but it only says "Unknown Device" everytime no matter what pc i use it says that. nothing else. but before that none of my pcs would detect theirs a phone plugged in at all.
Click to expand...
Click to collapse
Might be a problem with the cord
Sent from my Motorola DynaTAC using XDA Free mobile app
tzzeri said:
Might be a problem with the cord
Sent from my Motorola DynaTAC using XDA Free mobile app
Click to expand...
Click to collapse
No there is no problem with your USB cord or port. You need to do following steps.
http://forum.xda-developers.com/showthread.php?t=2432476
https://www.youtube.com/watch?feature=youtu.be&v=g01Pa7cgdSM&app=desktop
Please let me know if you succeed.
All credit goes to #bender_007