Database Users

Help with removing swype files.

So I have a mytouch3.5mm. This phone included swype as a default program. Long story short, I am also in the swype beta and received an email saying there is a new version. I didn't know how to remove a core file, so I posted a thread on t-mobile forums. A guy told me to use titanium to uninstall swype that way, so I did. I tried to install the new swype app but I get an error saying it cannot be installed on this device. Also at the beginning of the install it asks if its okay to replace the app. So I look through my files in manage applications and I see one last swype related file. "com.swype.android.inputmethod" I click on it and it says app not found. I'm assuming I cannot install the new swype because my phone thinks this file is still there(the file size is 0.00kb). How do I go about removing that file and getting swype back on my phone? Thanks for any advice you guys may have.

[Q] HELP I did not read before installing Gingerbred Keyboard

1st let me say that I am tired of not having 2.2 and not having things work with 2.1. Yes i know I did not read feel free to point and laugh. I have don't be best to find a fix before posting but can't find a fix.
I installed new gingerbread keyboard from the fallowing article and link. http://www.droid-life.com/2010/12/06/download-gingerbread-keyboard-for-rooted-devices/
Ok so I now have the voicesearch force close message.
I reinstalled the LatinIME.zip from post one from the fallowing article.
http://forum.xda-developers.com/showthread.php?p=8606369#poststop
This installs and the phone boots but still force close for stock keyboard.
Please advice on if I can fix this. I don't have root file explorer. If i must learn to use ADB now would be a good time for me to get my feet wet.

If you are lucky, someone with dev experience might pop on and tell you how to reset your keyboard from a shell. I have no clue whatsoever.
If I had your problem, I would either do a fresh rom install like black hole or super clean with a data clear, or I would try to troubleshoot if I were in the right mood.
To do the latter, I would open up the update that messed me up, and look at the files involved or possibly even the install script. Once I recognized the install package for the keyboard, I would open a shell (or root explorer) and ls /system/app and /data/data. If o found any matches... I would probably delete them (well knowing that I might brick my phone). I would only even consider this risk if o knew I had two keyboards installed. Then I would cross my fingers and reboot.
Shyeah right. Actually I would just restore a backup with cw recovery and call it a day.
Swyped w/ XDA App. When in doubt, mumble.

Maybe try downloading and installing a new keyboard from/with Rom Manager? Sonofskywalker3 has a few keyboards on there to install. I'm pretty new myself but thats what I'd try.
or do what soba said and install a fresh rom with a data/cache wipe.

I've installed GB keyboard and it works fine for me. Stock DJ05.
I would try simply disable it in the settings.
What exactly you do to get FC?

I installed a 2.1 APK and it went fine. I just lost my original keyboard. No Biggie.

[FIX] For Evo's having problems with latest Flash 10.2 update (10.2.157.51)

I was one of the many Evo users who's flash video was killed after the last Flash Player update. After much searching, couldn't find a single thing on why so many of us were having this problem so decided to do a little tinkering.
In my phone, I found a 2nd "libflashplayer.so" file under \system\lib\ which was also a different size from the one under \data\data\com.adobe.flashplayer\lib.
It also remained there after completely uninstalling the current version of Flash.
Installed the latest update and confirmed it as not working
Renamed the \system\lib\ file to "libflashplayer.bak" and flash instantly worked again! Putting the file back to normal instantly broke flash again too.
Also tried replacing it with the copy from \data\ (since it was the latest version) and flash still works just fine and didn't revert back to the older file after a reboot.
So - If any of you also have problems with the latest 10.2.157.51 version of Flash Player - check your \system\lib\ folder for this file and either rename or replace it and see if it solves this for you too
(Note - Always backup stuff first, and I am not liable if you fry your phone. ^_^)

It never ceases to amaze me up buggy and poorly controlled Flash is.
Thanks man.

Interesting i just updated flash NOW after trying twice before only to find video playback broken and it seems like they fixed it themselves now it is works, without doing anything on my end lol - Thank anyhow though!

Now you know why Steve Jobs doesn't want to see flash on Iphone or Ipad.
By the way - thx for the info.

To be fair, this is less adobe's fault, and more HTC's fault for putting the libraries in a read only filesystem. Even that would be alright if that path didn't superscede the ones in /data. I've been doing this on my own phone for a while now, and it does fix a lot of problems with flash. I wish more devs would take care not to put market apps that are subject to frequent updates in /system anyways. It doesn't really save any space in the long run.
Sent from my PC36100 using XDA Premium App

How are you guys renaming this file? When I try it says "insufficient permission". Tried with Astro.

zenmasta said:
How are you guys renaming this file? When I try it says "insufficient permission". Tried with Astro.
Click to expand...
Click to collapse
Found the answer here: http://forum.xda-developers.com/showthread.php?t=609866.
Download Etrong file explorer and give it root access.

Wouldn't upgrading to 10.3 fix the issue even easier?

mattykinsx said:
Wouldn't upgrading to 10.3 fix the issue even easier?
Click to expand...
Click to collapse
10.3 wasn't working for me either (I'm on the SprintLover's ROM), but after doing this, it works!
Thanks, OP!

I used ROOT EXPLORER to do this... thats the only program I know that works. it allows you to make the folder R/W instead of R/O then you can rename..
Im glad I found this.. now I am updates to 10.3 .. is there any difference in anything in 10.3 ?

Thanks! This fixed it on my EVO (running Fresh's 3.5.1 Froyo ROM), I used EStrongs file manager to make the necessary changes (you have to enable root options and mount system under settings first). Spent like half an hour trying to find a solution, since the search terms for the problem can be so generic ("Flash", "broken", "black box", etc. just returns a million different results).

WHY do some sites still say you need adobe flash when I go to them?? they worked with the old version.. could it be I have my browser agent set for desktop and the flash installed on the evo is reporting android?

My flash was also broken after the 10.2 (and 10.3) update. I used the method from the OP and it worked. Has anyone noticed though that after doing this fix if you have your "enable plugins" setting on your browser set to "on demand" that all flash content will say: "you need to update flash player to watch this video"? When the "enable plugins" setting is set to "always on" everything works flawlessly. I guess I should be happy that i got flash back at all but it kind of sucks because I like having my browser set to on demand so flash doesn't slow down my browsing experience.
At any rate big thanks to the OP

THANK YOU!!
This finally solved my problem, but in addition to renaming the libflashplayer.so file, I had to also rename libflashsnddec.so. Until I renamed the second file, Flash v10.3 kept giving me that blue Lego block with the question mark.
Thanks again!
Edit: Whoa...don't rename or delete libflashsnddec.so! Doing so causes both DolphinHD and the stock Android browser to abend on some websites (even simple ones like Amazon, etc.). I tried various combinations, uinstalls, reinstalls, clearing cache, backing out to an older version of 10.2 that worked previously, etc., and all ended up pointing to renaming/deleting libflashsnddec.so.

One question though. Would changing the .so to .bak affect when trying to update from the market? It worked like a charm by the way. Thanks.
Sent from my EVO using XDA App

Using that fix causes the stock browser and Dolphin Browser HD to abruptly close without even a Force Close warning.
I replaced the lib in /system/lib with the one from the latest Flash Player update and also placed the lib in /data/data/com.adobe.flashplayer/lib which was actually empty before I put the file there.
Edit: Nevermind. Got it. Removed the APK from /system/app and installed via Market. This placed the libs in the right folder and then I just copied them to /system/lib.
Edit 2: Alright, I'm trying to get this fix to work for my ROM so people don't have to do this manually.
So, I put the files in /data/data/com.adobe.flashplayer/lib so they get copied over when the ROM is flashed by the updater-script. However if I do this while the install_flash_player APK is present in /system/app, it seems to erase the contents of that folder causing Flash Player to not work again. I need to find a way to make it so the libs stay in /data/data/com.adobe.flashplayer/lib.
Any suggestions?

does your "new" flash lib file read
01 OCT 09 6.87 MB
I moved the file to the proper folder using r/o and root explorer, and rebooted
both files are in place, but I still get the blue ? mark on certain sites

[Q] APKs won't sideload via adb or a file manager

So I am trying to load a couple of apks I have and it's been no go. On my Epic I usually just dropbox, open, and install. I tried that and initially got the security message. That is already taken care of via nookcolor tools. So that isn't the issue. My issue is every time I go to install I go to Astro, open the file via the "open app manager," it takes me to the info install page...I click install and it loads into the package installer, excellent...and then it just stalls and the progress bar runs and runs but never progresses. This has happened with every apk I have now tried.
Okay...so I figured I'd just go the little more involved (very little, no need to be that lazy, right) route and adb install. Well carp. All goes well, I adb install blahblah.apk and it starts rolling..."570kb blah..etc pkg /blah/temp/blah"...and just hangs there...never to give me the gratifying "success" message. Again, I have tried this with different apks that I know work and the same results. I restored to stock and rerooted, just in case. Same
I am running stock rooted (manualnooter) at this point, just got the nook day before yesterday (one of the many who jumped at the refurbs). Market apps download fine. I'm a blue dot, if that makes any diff. Likely not but meh.
I have searched and googled and not found the answers...but I know I am missing something elementally simple. My luck I'll look like an idiot and it will be a "did you check to see if you had any gas?" broken down car scenario. I'm okay with that, as long as I'm running again. I'm pretty sure I checked all the out of gas scenarios but I likely missed one or two so... any help is much appreciated. Thanks a ton...
I should know better than trying to write before coffee

Well, My answer is not a "check gas" answer. It's pretty dang weird.
1. Download ES Explorer from the market.
2. Start ES Explorer, hit Menu>Settings. Goto Root Options (NEW) and tick both check boxes. Hit allow when it asks you to.
3. Go back twice, until you see your sd card contents. Find the APK on there and select and hold. Hit copy and then hit the 1st button on the row of buttons (it's an icon of an sd card OR a Home icon) If you see a data folder, go in to it. If not, hit the 1st button again.
3. Once in the data folder, go into the app folder. Pull up the little white tab on the bottom. Tap the APK you wanted to install. It will copy. Once you see the APK's icon in the folder, hit the home button and restart. That should have installed it but it is a slow method. Note that you can Multi-Select APK's by pressing the Multi-select button and pasting them all in the /data/app/ folder.

are you sure you have side loading checked
Settings > applications should be the top box.

fnordsnafu said:
So I am trying to load a couple of apks I have and it's been no go. On my Epic I usually just dropbox, open, and install. I tried that and initially got the security message. That is already taken care of via nookcolor tools. So that isn't the issue.
Click to expand...
Click to collapse
I think he already took care of that. And he is on stock, so there is no Applications setting.

ikingblack, thank you, thank you!
Not sure why but by doing this it somehow unsnafued the package installer as well (fingers crossed). I went through your instructions with a known good apk that would not install for anything before. And there it was after the copy, paste reboot etc. Not too much to ask for...still was confused as to the why of the normal package installer method not working. So I decided to give it (package inst) a go with another known working apk (I had just tested it on my epic) that previously wouldn't install, repeatedly, and now it installed just like it should. Scratching my head in wonder. It shouldn't be the reboot, as I have do so many times...the only difference is the install instructions and adding ES (I'm leaving astro behind I think). All I know is it is working and I am a happy camper (tent is in the back yard...) Thanks again! cheers!

Sure. Also, you can select all the APK's using the 2-file icon at the top and tapping the APKs, then press-and hold on one of the APk's and then go to data app, and keep tapping the APK's you wanna copy. And then reboot. Enjoy your Nook!

Thanks for this, it fixed it, but I don't know why.
I suffered this issue on my dell streak.
It was working fine a couple of days ago when I installed GetJar.
Suddenly today for no reason I can determine:
All APK's I tried the install button in the package installer was not grayed out, but it would not respond when pressed.
I've just been setting up my streak again and installing a lot of software. I'm guessing something must of gone wrong.
Someone on another post suggested JuiceDefender may have caused it but I've not installed that recently.
In my case I did:
(1) Installed esFileExplorer
(2) Copied an apk to the folder /data/app/ as described above
(3) restarted the phone
This did not install the app for me.
(4) Tried running the apk file again. Suddenly the Install button is clickable again?! The app then installed just fine.
(5) Tried a different apk (without copying to /data/app/)
Now that will install fine?!
This is really weird. I can't replicate the issue now (which is good!)
but I also can't tell which action fixed it.
As said above it may have been installing esfileexplorer and giving it root access.
It may have been the act of copying the file that reset something.
It wasn't the reboot, at lease not on its own as i'd already tried it.
Regardless, thanks for the info.
If anyone sees this issue again you might want to just try installing esfileexplorer and see if apk's will then install.
This might help us identify which bit of the process is creating the fix.
Just found another suggestion if anyone is interested:
Some suggests using the 'Fix permissions' option of Titanium Backup. I have no way to test this.

issues with swype - eh09 pwgb v. 2.0b3 - please help!!

I am currently running powerwashed gb v 2.0 beta3. It has the stock version of swype (or close to it...) and i hate it. I have disabled it, used antTek file explorer to delete swype.apk in root/sys/app and also the swypecore in root/sys/lib and ALSO the swype folder in data/data. swype is still on my phone. I am confused! My superuser has granted anttek permission and blah blah, but the files will not delete no matter what i try to do. i just want to update to the newest beta version of swype since the stock one is horrible. any help would be greatly appreciated.
I would have posted this in Dev section, but too few posts on my account and it has denied me...
here are my specs
Current Device: Samsung Fascinate
Current ROM: PWGB EH09 ROM v2.0b3
Current Radio: EC09
Current Kernel: Stock EH09 Kernel
Thank you to anyone who can help! And a BIG Thank You to the devs who put this rom together. So far it is the best I have ever used (and i've tried them all...i think... lol) anyway thanks again!
EDIT: Before doing any of this, naturally, i kill the running swype process and delete the swype installer...

Dont post this type of thing in Dev. Section...this has nothing to do with development.

i figured as much. maybe q+a would be better?
btw, do you have any advice for my swype issue?

I used Titanium Backup to remove swype 2. Worked ok for me. Was able to install swype 3 beta after that

Are you giving the program R/W ability within the folder?
Make sure you pick something like Android Keyboard before you try and uninstall.

FDro said:
Are you giving the program R/W ability within the folder?
Make sure you pick something like Android Keyboard before you try and uninstall.
Click to expand...
Click to collapse
thank you sir! I actually deleted the anttek file explorer...cuz its no good... paid for root expl. and did just what you said and now i have the excellent swype beta working on my phone! thank you again!

if you think removing swype was a pain...
I replaced the bootanimation.zip in /system/media...and change the name of original bootanimation.zip & still it played original and the new zip had no affect on boot up at all.
I placed a new bootanimation.zip in /data/local and still same result.
I changed the permissions using Terminal Emulator and also tried the same with a file manager to no avail.
I even deleted the original bootanimation zip and also the one I was trying to install and the phone still booted up as if nothing was ever changed. I eventually bumped something on the screen while changing hands when file snooping and maybe deleted something so I reflashed the PWGB rom again and started over.
I have issues with the USB settings magically being set to "Samsung KIES" [almost]everytime I plug it into my PC, even though I set to MASS Storage or ALWAYS ASK before hand.
any fix on that would be appreciated..
OH BY THE WAY, I LOVE THIS PWGB ROM, I REALLY DO!!!!
***********as of 10/21/11 I give up on trying to change the bootanimation... I have spent too long on that project for nothing.