I have a bluetooth headset working fine for calls, however have 2 questions. Has anyone gotten the headset working for things other than calls, such as media player? Also I have a problem with answering the phone with bluetooth turned off, if I turn it on while on the call and give it a minute to sync with headset and then try to transfer the call to the headset it won't work. But if I hang up and call right back the bluetooth will work.
I have the same problem but regrettably no answer: ( :? :? :?
bleuthooth headset
hello i have the bt g2 it s only 12 gramms and its works fine with my mda 2
You can listen media player with your headset ????
Without specific manipulation??? Not possible
:shock: :shock:
Hi every1!
Actually, until someone (HTC, Micro$oft, or anyone else) comes out with a new Bluetooth stack that support the full Handsfree profile, (something any BT equipped mobile phone already does) there is NO other use of headphones.
Even the more simple functions are not implemented.
I think this is the worst part of the Himalayas right now. A wonderfull piece of hardware, but very poor phone functions.... to say the least.
BT6023
This is the BT Handsfree that Im using now. So far so good. No connection failure.
Handsfree?
Hi nelsonlye!
Sorry to say, but, This is not a headset?
Could you be more specific on the brand and model and the "handsfree" functions it supports?
Does it allow Voice Dial or any other voice input?
It looks like a conventional headset, so if no other functions are implemented, it IS a headset, NOT a handsfree device.
Furthermore, until HTC or Microsoft release a new Bluetooth stack, looks like no new functions will be available. And it seems it will take forever!
Regards.
I need to listen to MP3s throught the bluetooth headset.
I don't need a good sound quality - it's just for speech.
I just want to play that MP3 continuously (again and again) so I'd be able to put on paper as much as possible.
So is there a way to play a MP3 (or any other sound format) using the BT headset?
i think it require a bluetooth profile which the xda2 dont currently support
I use a SouthWing BT headset, bought on Ebay.co.uk for around £35.
It supports both the BT handsfree and headset profile, which the XDA2 supports too.
I can listen to MP3's or use it to take or make calls. You should be able to use any BT headset that supports the headset profile, most only support the handsfree mode.
MP3s through Bluetooth
I have a Plantronics M3000 headset when I bonded it with my XDA II I selected the option for the headset profile from BT Tools. When I switch on the headset mode from the Today Screen I get a bleep on the headset but no audio is transferred to the headset it still comes out of the speaker. Do I need to tweak any other settings?
Im guessing that the Plantronics is not fully compatable with the headset profile.
Thanks for any help.
Paul
Rudegar said:
i think it require a bluetooth profile which the xda2 dont currently support
Click to expand...
Click to collapse
OK. Where can I get the required BT profile? Does the Widcomm driver have it?
It normally works on my PC - I can listen to all sounds form PC throught the BT dongle and BT headset. So it's just a question of driver. Where can I get it for my XDA2?
captin said:
I use a SouthWing BT headset, bought on Ebay.co.uk for around £35.
It supports both the BT handsfree and headset profile, which the XDA2 supports too.
I can listen to MP3's or use it to take or make calls. You should be able to use any BT headset that supports the headset profile, most only support the handsfree mode.
Click to expand...
Click to collapse
Can u provide more details please? I couldn't find your mentioned headset from Ebay.co.uk
This ie the companies web site - http://www.south-wing.com/
When I was setting up the pairing on my XDAII it recognised the earpiece as having the headset protocol and asked if i wanted to connect using the headset profile or the handsfree profile, I chose the headset one. It still works perfectly as a handsfree earpiece but also allows me to listen to anything played with the windows media player, which i use for MP3's.
It also works with a PC using a bluetooth dongle, I use it as a handsfree phone for my home phone.
how does it handle music ?
i mean does it play one channel of the stereo
or does it play joind mono ?
to me listening to music with 1 ear is pretty useless
can you please also elaborate which rom version ? pocket BT tools installed or not? which BT stack?
the headset and handsfree profile are supported by MOST BT headsets
my jabra 250 suppprts both profiles, but I am never able to channel windows media output through the BT headset ((
so any info would be very insghtful
captin said:
This ie the companies web site - http://www.south-wing.com/
When I was setting up the pairing on my XDAII it recognised the earpiece as having the headset protocol and asked if i wanted to connect using the headset profile or the handsfree profile, I chose the headset one. It still works perfectly as a handsfree earpiece but also allows me to listen to anything played with the windows media player, which i use for MP3's.
It also works with a PC using a bluetooth dongle, I use it as a handsfree phone for my home phone.
Click to expand...
Click to collapse
Hi captin,
I had a look on the website. It didn't mention that the handsfree can support xda2. Also, there's no info at all that it can be used to listen mp3.
Can u show us more how you do it?
Thanks
mp3
ok friend to use your headset with xda2 to lesson to mp3 you need widcomstck you can find in our fourm and kai blutooth headset batch you can buy from handango in 3 dollars and you can give to our fourms instool both and make pairing with your headset and thats work fine but only mono beacuse we need blutooth headset streo and in the market only mono thanks
captin said:
I use a SouthWing BT headset, bought on Ebay.co.uk for around £35.
It supports both the BT handsfree and headset profile, which the XDA2 supports too.
I can listen to MP3's or use it to take or make calls. You should be able to use any BT headset that supports the headset profile, most only support the handsfree mode.
Click to expand...
Click to collapse
I think you must be the only person on the planet that has mp3 working through bluetooth without any patches/hacks/etc, can you please elaborate more because it doesnt work for anybody else.
I am using a Plantronics M1000 (M1500) with iMate 1.52.00WWE.
With Pocket Bluetooth Tools I can use it for Phone calls but not MP3.
Annoyances are -
1. I can't initiate dialling from teh Headset unless I dial from the phone and then hangup (even if BT permanently on).
2. If I leave BT permanently on the Headset battery goes flat very quickly in standby.
3. If a Call comes in on Call Waiting, the call transfers to the phone and I can't get it back to the Headset
Mike Sydney
Any more news on this? The world waits...
Bluetooth/XDA 11 Integration
Hi Guys,
Just thought I would let you know that New Answer Ltd have done bespoke integration work into Bluetooth headsets. For the application that you are talking about, it is possible to develop an app to run MP audio apps to any bluetooth headset. get intouch with [email protected]
Dan
Yesterday, I tried w/ Kai's Bluetooth Headset patch
I've found that it doesn't work with XDAII.
So, I'm still waiting for the new patch.
Besides, does anyone know what Tobias, Pocket Tools developer, is doing?
I've sent emails to him serveral timee But there is no reply. His website also stop progressing as well.
Headset Profile
So, the XDA 2 does not have the profile that allows MP3's to be played through a headset. But does anyone know a profile that allows voice dialing from the headset? South-Wing has voice dialing from the headset but captin is the only person i know who has it working on the XDA 2. Anyone got any suggestions?
Michael
Re: Headset Profile
mlee2 said:
So, the XDA 2 does not have the profile that allows MP3's to be played through a headset. But does anyone know a profile that allows voice dialing from the headset? South-Wing has voice dialing from the headset but captin is the only person i know who has it working on the XDA 2. Anyone got any suggestions?
Michael
Click to expand...
Click to collapse
Unfortunately, it's not as simple as just a profile. Since a third party voice dialing software has to be manually added to the XDA II (its not built in), the headset would have no way of knowing which application to "activate" when the headset button was pressed. The only way I see this happening is, if someone can hack the bluetooth stack to detect a headset button press, then route the command to a voice dial software installed on the XDA II. Ideally, the dll would have an interface that would allow you to select the application you want executed when the bluetooth headset button is pressed.
Rumor has it that the iPaq 6300 won't have voice activated dialing either - and it will have the best bluetooth software stack around, the Widcomm stack. If it won't support it, I wouldn't have much hope for the XDA II unless some hacker decides to give it a try. But it sounds like a lot of work.
Reply from South Wing
I sent a email to South Wing about compatibility with the XDA 2 and i got this reply
The XDA II does not support the Bluetooth hands-free profile which is used by the NeoVoice USB headset and gives access to the various hands-free mode features of the device.
However, it supports the headset profile also supported by the NeoVoice USB. This means you can make and receive calls perfectly and use functions of the headset like voice dialing.
Overall, without the hands-free mode capability, the features you would miss on are only the following ones: rejecting a call, transferring a call to the phone, last number redialing and disconnecting from the phone.
The headset is available online from expansys.com (type NeoVoice in the search box) where you may acquire the USB cable and car charger for little more.
There you have it from the horses mouth, hope this is some help
Michael
Re: Reply from South Wing
mlee2 said:
However, it supports the headset profile also supported by the NeoVoice USB. This means you can make and receive calls perfectly and use functions of the headset like voice dialing.
Click to expand...
Click to collapse
Hmmm. Interesting. But I still don't see how voice dialing can be supported through the headset. Again, the XDA II has no built in voice dialing software, so there's nothing to standardize on. Therefore, your only option is a third party dialing app. So, if you were to install something like Microsoft's Voice Dial, the headset would have no way of knowing that it needs to call the Microsoft Voice Dial EXE when you press the headset button. Other bluetooth phones that do support voice dial can use headsets that, when you press the headset button, can call standard API's that initiate the voice dialing capability on the phone. The XDA II does not have this standard API set.
Anyway, I'm still more interested in pushing standard sound like MP3's and audio books through the BT headset. But the voice dialing stuff is interesting nonetheless.
Dear All,
I have been for the past 3 weeks trying to know if it's possible to write an
application that would send/receive the phone audio conversation to a pc if
the device is places on the cradel?
What i want to do is to use my pc's mic and speaker as a headset. I was
thinking that this can be done, since a friend of mine has bluetooth on his
laptop, i paired my phone with his laptop via bluetooth, and one of the
services provided was Audio Gateway, and used his laptop's mic and speakers
as a bluetooth headset.
I wonder how this is implemented since i want to do something like that over
the Cradel connection. or any other media as a matter of fact
Your help is really appreciated
Mustafa Rabie
You've got the answer in your post. Simply get a bluetooth adapter that preferably has widcomm drivers (I know they work like this). Set it up as an audio gateway and pair with it, hopefully you should now be able to use it as a headset.
Is there any pc program to emulate the functions of a bluetooth headset like answer the call or reject it, display the caller number?
hi all thanks for your replies:
fruitloaf - i think u didnt get my question. I want to emulate that, i want to write an application on the PPC Phone that when i answer i can capture the audio convo (mic/speaker) and transfere it to the PC maybe via the pass through when the device is on the cradel.
jacusi1980 - i will write an application on the PC that will handel the answering, dialing, rejecting etc. Which also i would like to know how can i control the answering rejecting etc remotely.
Thanks
Hi. I have a Spring ppc-6700 running wm5 with the latest rom.
My problem is that I cannot use the BT headset to talk on Skype or to listen to music from the computer. I do not know how to switch to the headset. It's paired and i see the headset icon on the screen. Before the latest rom i used to press the action button on the headset and it would switch to it. Now when i press the button i get this annoying voice dialing feature.
OT: When i use skype it only works in speakerphone mode. Any way i can get skype to work through the earpiece so emulate talking on the phone?
Thanks.
This is normal behavior.
Skype does not support the phone functions on Pocket PC and so your (mono) Bluetooth headset does not get its sound. The same happens for ANY application that is not part of the "phone" functionality of the Pocket PC. The mono Bluetooth headsets ONLY work with applications that recognize the "HSP or HFP Bluetooth profiles".
>Any way i can get skype to work through the earpiece
There are two ways to do that:
1. Email Skype and tell them to get their sh*t together and provide a phone-friendly version of Skype that supports HSP/HFP.
2. Buy a *stereo* Bluetooth headset. This will work both for music and general pocketPC sound (in A2DP/AVRCP mode) and in HFP/HSP mode (for phone calls). With a stereo Bluetooth headset you can hear the Skype sound on your headphones, but you will still need to talk using the PocketPC's microphone (until Skype supports the HSP/HFP profile that is). For normal phone calls, you will be able to use the headphones and microphones of the BT headset directly.
It all boils down to applications support the HSP/HFP BT profile.
i've used the bluetooth headset with skype before but after this update with the stupid voice dialer app, i just can't get it to work at all. I want to get rid of voice dialer app. and have sound being routed to the headset as before.
I tried BTAudioToggle.exe with no success. Absolutely nothing happens.
FIXED.
I went to
HK_LOCAL_MACHINE\SOFTWARE\OEM\VOICECOMMAND\Path
And cleared the path. This way when i press the bluetooth button on the headset it just activates the headset profile but doesn't launch the stupid voice dialer which shuts off the headset profile.
I have a Vario II with Skype installed.
I realise that Skype recommends that you use the supplied headset when using the product for calling (rather than the speakerphone) but I was wondering if I can use my Bluetooth headset instead of the wired headset?
Bluetooth works fine with ordinary phone calls so I sort of expected it to work with Skype (doesn't the phone just see a Bluetooth headset as a standard headset once a partnership has been established?) - but it doesn't appear to work.
Am I missing something or does Skype for Pocket PC not support Bluetooth? And, if not, why not?
Skype probably doesn't use BT Headset profile. They probably should. But look at how long it took MS to make Voice Command work with BT and on our phones it didn't even work. I bet A2DP stereo headsets would work since it is an audio sending profile and not related to calls but you wouldn't be able to use the MIC except for the one on the phone. This might be enough functionality someone could try if they haven't already. However, there is the utility that someone wrote for the Samsung SCH-i730 that redirect all audio to the BT headset. There is no reason it shouldn't work on any PPC that uses the Microsoft BT stack. So try it out and see if it works.
http://pdaphonehome.com/forums/391448-post1.html
You need to create shortcuts to the toggle executable to make it easy to use.
There is a reg entry that will allow you to patch all sound to a BT headset.
HKLM\Software\OEM\VoiceCommand
LaunchAPEnable should be 0 instead of 1. Once done the headset hardware button will be remapped to connect to the device instead of launching voice command.
You will still be able to press the button to answer calls, it just won't initiate voice dial for new calls.
I would suggest one of those small freeware that allow to remap the hardware button (my button right softw key's been remapped to display a full program menu, that includes the voice command). I'm using a program called New Menu for Windows Mobile 5.
Hope this will help,
Sam
Can anyone share if they have any other methods to use BT with skype?
bsica said:
Can anyone share if they have any other methods to use BT with skype?
Click to expand...
Click to collapse
sorry for the bump... but if this can somehow work it would be a godsend... any ideas oh wise ones?
read my previous post.
To toggle Audio to A2DP you might want to see:
http://forum.xda-developers.com/showthread.php?p=1485391#post1485391
It's an easy way of switching audio to the headset and back to the device. This is for A2DP only.
hey guys,i was hoping for a different thing..is it possible to change the sound from the loudspeaker to the small speaker?? like using a real phone instead of using earphones..i dont have any earphones or bt headsets for the moment so i was hoping that someone can help me out here..its annoying if ur using skype while other people can hear the person you are talking to..
p/s:i've search everywhere including this forum,but still no solution..
No. Apparently it's a flaw in WM: it doesn't give apps access to the phone speaker.
that's a shame..hope microsoft will consider this for their future product
Bluetooth does work with Skype
bsica said:
Can anyone share if they have any other methods to use BT with skype?
Click to expand...
Click to collapse
Try www.Fring.com it has the Skype, MSN, ICQ in there they're all work with the bluetooth. (check the setting after the installation to allow bluetooth headset)