Related
I would like to see a today plugin that features quick contacts (Kind of like the HTC home plugin).
The features I would like to see are:
* Today plugin
* Either use photo or set text for each contact.
* Opens contact in default contacts app, doesn't just dial (ie so you can choose to send an SMS)
* Vertical or horizontal list scrolled by gesture. Vertical or horizontal option would be nice, but vertical scroll probably more important - a lot of cube apps (eg ultimatelaunch) are controlled by horizontal gesture, if we could have this contacts app controlled with vertical gesture it would not interfere.
Please note that I mean a gesture controlled list WITHIN the today screen window, not as a seperate full screen app - plenty of things already do this.
* No add contact interface would be required, adding contacts to be included in dialer into a regular outlook category would be perfectly acceptable. Showing photo if contact has one or name if not would also be perfectly acceptable rather than an interface to select that.
V2R Photo Dialer 2 is almost exactly what I want but is controlled by horizontal gesture only. I tried to contact V2R to request this change but I received no response.
[Edit: Thinking about it, it doesn't need to be a favorites dialler, it could just have tickboxes for each category - if you want to use it as a favorite contacts launcher, just set it to the "favorites" category only, or you could leave all categories on to show the whole contacts list]
I'm using Face Contact which has all you've asking for, except horizontal but if you use Ultimate Launch then you can exclude the plugin from the gestures of Ultimate Launch.
http://www.cnetx.com/products/contact/
Nice app - I prefer it to the V2R one. I have emailed the author asking for the option of vertical gesture to scroll the list. I don't care if the list spins horizontally as it is, as long as I can spin it with a vertical gesture so it don't interfere with ultimatelaunch.
evilc said:
I would like to see a today plugin that features quick contacts (Kind of like the HTC home plugin).
The features I would like to see are:
* Today plugin
* Either use photo or set text for each contact.
* Opens contact in default contacts app, doesn't just dial (ie so you can choose to send an SMS)
* Vertical or horizontal list scrolled by gesture. Vertical or horizontal option would be nice, but vertical scroll probably more important - a lot of cube apps (eg ultimatelaunch) are controlled by horizontal gesture, if we could have this contacts app controlled with vertical gesture it would not interfere.
Please note that I mean a gesture controlled list WITHIN the today screen window, not as a seperate full screen app - plenty of things already do this.
* No add contact interface would be required, adding contacts to be included in dialer into a regular outlook category would be perfectly acceptable. Showing photo if contact has one or name if not would also be perfectly acceptable rather than an interface to select that.
V2R Photo Dialer 2 is almost exactly what I want but is controlled by horizontal gesture only. I tried to contact V2R to request this change but I received no response.
[Edit: Thinking about it, it doesn't need to be a favorites dialler, it could just have tickboxes for each category - if you want to use it as a favorite contacts launcher, just set it to the "favorites" category only, or you could leave all categories on to show the whole contacts list]
Click to expand...
Click to collapse
You can do horizontal scrolling photodial with my app, throttlelauncher.... It's free, so if you want to, try it . You can install it from http://www.throttlelauncher.com. After making the full instalation (use the exe setup or install both cabs) here you have a little setup cab for a theme showing only a contact row (if you're interested, you can have much more showing app's and other stuff in multiple pages). So to sum up:
- Go to http://www.throttlelauncher.com/
- Ensure you install everything on the same media (SD or device)
- Install both cab or use the desktop instalation in full mode.
- Install the cab attached to this thread.
- Enable throttletoday today plugin (it might take a little bit to load)
- Add as much contacts as you wish to the row .
Feel free to post any comments, requests or constructive critics . You can customize an xml to make the photos biger, order them in multiple rows, remove the ad delete icons, etc. Hope it matches what you're looking for....
Thanks for that, but the ThrottleLaunch PhotoDialer only allows scrolling of contacts via a horizontal gesture. I need to control it with a *vertical* (up/down) gesture. Also, ThrottleToday will not show inside ultimatelaunch - it will show if I put it on the main Today screen, but trying to add it as a today plugin in ultimatelaunch does nothing.
I did get an encouraging response from the makers of Face Contact yesterday though:
Hello,
thanks for your feedback.
At first thought, the idea of using a vertical gesture and having the list scroll horizontally appears a little bit disturbing, but we think we understand the rationale behind your suggestion.
We will indeed play around with UltimateLaunch to see if you can find out an option that is both intuitive and that allows Face Contact to be usable within their interface.
As it is now a possible solution is to exclude our plugin from being affected by Ultimate Launch gestures, so that when our plugin is active (and only in this circumstance) the left-right gestures will actually scroll the contact list instead than spinning the cube. Then, as soon as you apply the left/right gestures outside of our plugin, the cube will take control.
When developing Face Contact we left the door open to the possibility of having a vertical layout of the contact list, though, of course, this doesn't fit well with the current Today screen organization, which assumes all plugins are placed horizontally. In other words, it wouldn't be that difficult for us to layout the whole list vertically instead than horizontally,
So, we will definitely keep your comment in mind, as it is possible that within a different context (such as Ultimate Launch), we could actually provide both a vertical layout and vertical gesture, which would indeed make quite a lot of sense.
At this stage, having just released Face Contact a couple of days ago, we are currently gathering feedback to see how to move on with further releases and updates.
So, your feedback is very welcome: thanks again.
Best regards,
The CNetX Support Team
Click to expand...
Click to collapse
I downloaded Face Contact last night, and so far I am liking it. The reason I went with Face over VR2 is the space issue. VR2 looked to take a lot of space up in the Today screen, and being on a 240x240, space is a big issue. Face seemed to take a minimum of memory and leave room on my screen. I have it in a Shell tab with the native Palm picture dialer. The only option I could think of adding is the ability to dial automatically when the picture is pressed. I know that can lead to a lot of mis-dialings, but maybe a setting like normal usage until the pic is pressed for a second or so, and then the chosen primary number is dialed. If that makes sense great, if not, please let me know and I will try to explain better!!
Here is a screen shot of where I have Face on my Today screen:
im using face contact. it does everything you are asking for. im also using ultimatelaunch, the two make beautiful music together. especially if you choose the "disable gesture" feature when you enable it in ul. ive played with this quite a bit, and it is very intuitive how smooth everything STILL works. especially for these to be a first version for both apps. experiment with it. the result is perfect
Lots of nice feedback here: thanks guys.
syrguy1969 said:
...
The only option I could think of adding is the ability to dial automatically when the picture is pressed. I know that can lead to a lot of mis-dialings, but maybe a setting like normal usage until the pic is pressed for a second or so, and then the chosen primary number is dialed. If that makes sense great, if not, please let me know and I will try to explain better!!
Click to expand...
Click to collapse
I'm not sure if this is referred to Face Contact, or to other software you are using. If you are actually talking about FC, then please note that you can easily reassign the TAP and TAP & HOLD actions to trigger different commands, including CALLING the selected contact. Just check the "Action Settings" screen and you'll find the options there.
Also note that when Face Contact is the active plugin you should be able to CALL the selected contact by simply pressing the START CALL key of your phone. This is usually easier and less error-prone than having to tap or tap and hold. And, if you call by using the START CALL key, you can use the tap and tap&hold actions for other things, such as displaying the shortcut menu, or accessing the Face Contact Manager.
PS: we have included quite an extensive help file, with lots of tips and tricks and information on things like this. Maybe you may want to give it a quick look.
I guess I missed the tap+hold part, that is exactly what I was getting at!!! I guess this app has just about it all for me then, I will keep testing like crazy, but so far I am very pleased with it!!!
i'm using throttle now, but the pics look like garbage. I'm seriously OCD about the dumbest stuff, so I'm still looking for an answer. I just want face contact to have a transparent background, and I'd buy it.
J Shed said:
...
I just want face contact to have a transparent background, and I'd buy it.
Click to expand...
Click to collapse
Hey Shed, please have a look at my post concerning the plugin background in the Face Contact thread here...
http://forum.xda-developers.com/showthread.php?t=378145&page=7
evilc said:
Thanks for that, but the ThrottleLaunch PhotoDialer only allows scrolling of contacts via a horizontal gesture. I need to control it with a *vertical* (up/down) gesture. Also, ThrottleToday will not show inside ultimatelaunch - it will show if I put it on the main Today screen, but trying to add it as a today plugin in ultimatelaunch does nothing.
I did get an encouraging response from the makers of Face Contact yesterday though:
Click to expand...
Click to collapse
Hi evilc!
Sorry for the delay on the answer. Vertical scroll on throttlelauncher is planned for a further release (probably 1.0), it's still alpha so many things are missing but I thought It will mach what you where looking for... Any way, I've install UL and find out why the plugin is not showing... seem's that UL doesn't work exactly like the today screen when hosting today plugins (probably to save some memory) so the today plugin exe is not launching. To sum up, to make throttletoday plugin show inside UL the only thing needed is running manually the ThrottleTodayPlugin.exe located on the throttlelauncher instalation path. At least that worked for me. Also as you've said the horizontal scrolling will interfer with the tab change gesture so disabling os setting a time out it is needed by now....
J Shed said:
i'm using throttle now, but the pics look like garbage. I'm seriously OCD about the dumbest stuff, so I'm still looking for an answer. I just want face contact to have a transparent background, and I'd buy it.
Click to expand...
Click to collapse
Hi shed!
If contact photos don't look good you can try playing with the config.xml file to change the contact photo width an height values (I recommend to keep the 3/4 ratio if you use standar photo dial photos). The config.xml file will be inside the PhotoDialer1Row (or 2Row if you use this one) on your setups folder on your throttlelauncher instalation path. All you need to do is search for the allcontactswithphoto tag and play with it's height and width attribute.
Gabibbo:
I saw your post and had already replied. I'm just waiting for the version to show up.
APBilbo:
I have thinkered with that setting, the problem is in just how throttle scales the images. I don't recall the terms, but the scaled images are distorted.
@evilc .... I too use face contacts in a UL panel. When you use the disable gesture feature, It only disables the gestures from being passed to UL in the active plugin area. You can still spin the cube via gesture in an inactive area of the panel. Or if combined with something else, an area that does not otherwise respond to a gesture. Try it out.... In my case I have found that though it is a great idea, the vertical gesturing is not necessary for a fully functional solution.
J Shed said:
...
APBilbo:
I have thinkered with that setting, the problem is in just how throttle scales the images. I don't recall the terms, but the scaled images are distorted.
Click to expand...
Click to collapse
Ok, thanks for the info... I'll take a look at that... It's NET.CF the one scaling the images.... probably there's a smother method to get it...
nextpimp said:
@evilc .... I too use face contacts in a UL panel. When you use the disable gesture feature, It only disables the gestures from being passed to UL in the active plugin area. You can still spin the cube via gesture in an inactive area of the panel. Or if combined with something else, an area that does not otherwise respond to a gesture. Try it out.... In my case I have found that though it is a great idea, the vertical gesturing is not necessary for a fully functional solution.
Click to expand...
Click to collapse
Yeah, I realised that a while ago, it is OK if you have something else in the UL tab without gestures disabled, so that you can gesture left in that area to spin the cube.
I think overall, the interface I would like would be gesture left/right between the faces, then up/down to scroll info on each face. I think for this interface, a vertical list would be more suitable than horizontal scrolling icons, it would just work better visually.
I really like the music browser in conduits pocket player - I would kill for one of those in a UL face along with a contacts list done in a similar manner on another face, thumbcal (with scroll month by vertical gesture) on another face... That would be nirvana for me.
Hello guys!
I think many of us came to the thinking that, though TouchFLO 3D is great UI, we should make something alternate, something that better fits our needs. And now, i think i'm ready to create one, but first we should decide how should it look like and how should it operate.
So, i propose a kind of "brainstorming contest" where you decide about the look of a new UI. But to avoid this turning into an annoying feature request list ("more tasks on today! please! please! please!" ), here are the rules:
- NO text-only suggestions - every post s/b illustrated with pen-and-paper drawing
- NO screenshots or photoshop cooks - only hand-drawings or something that look like em (yes, you can use digitizer tablet )
- drawings are NOT required to be professional - just something to illustrate you thoughts
- you are NOT required to develop the complete UI - you may just post suggestions about UI parts, but preferred things are unique navigation idea (try to forget about tabs), apps\tabs convergence, brand new useful apps/tabs
- best contributors ideas (possible with Manila API) will be implemented and their names will be listed in "About..." screen
Posts that violate rules (even best of them), will be ignored.
That's it.
maybe this is too open ended.. do you haev some ideas of your own that you might want to put forward?
omniwolf said:
maybe this is too open ended.. do you haev some ideas of your own that you might want to put forward?
Click to expand...
Click to collapse
I'm already implementing ideas of my own
I just wanted to know what do folks think/dream about
show us whatcha go then!
I think D-MAN666 doesn't want to influence people, this is a brainstorming If he starts with his idea, it is probable that nobody will post a completely different concept...
This might be a useful start for interface design:
http://forum.xda-developers.com/showthread.php?t=397220
One thing I would love to see is a radial menu:
http://en.wikipedia.org/wiki/Pie_menu
Similar to tap-and-hold for a context menu, but instead of a list popping up, a radial menu appears. You could fit 8-12 options around the circle, which would cover TF3d's pages.
So in usage, tap for the popup radial menu, then:
- swipe up for Contacts
- swipe right for Music
- swipe down for Home
- etc
IMO, it's much easier to be accurate in swiping at different angles/directions than it is to be precise with the default TF3d slider tabs, so you could really speed your way through the interface. The same could apply elsewhere: tap and hold a contact, then swipe up to call, left to SMS, right to email, etc.
For other thoughts, here's a read on interface optimization (for the technically inclined):
http://en.wikipedia.org/wiki/Fitts's_law
And maybe later if I'm bored I'll draw some mockups
http://microsoft.blognewschannel.co...bile-7-to-focus-on-touch-and-motion-gestures/
sorry for breaking the rules, but everyone else is lol...thats a link to the WM7 concept design...along with theoretical gestures...i really digg the battery bar on the bottom and the reception bar...
Ill be the first then...
A quick drawing i knocked up... manila stays very much the same but basicaly show page navigation on the manila both horizontal and vertical..
I hope its clear enough
2 ideas here
I am going to break the rules since I'ma t work and can't really be seen drawing lol.
Here they are:
- Make use of the touch capacitative ability of the the buttons panel. It's made up of three touch panels. Maybe a swipe from left to right to unlock and right to left to lock.
- Display applications within tabs. Ex: Being able to display Icontact when sliding to the contact tab.
And for UI inspiration, I would look here:
http://www.throttlelauncher.com/portal/setupsaskins/45-091setups/69-new-minimal-flow-theme
Ok, here's my concept
The general idea is to keep most of manilla look'n feel, just remove useless animations/transitions, and change the home screen.
Changes : on the right side of the screen, a scrollbar similar to the "contacts" one appears. It controls the content of the box under the clock.
On the left, a button to maximize (take the place of the clock) the box, and a fast vibrator/ring permutation button.
So, by scrolling the bar, the content of the box changes, could be call log, contacts, fast program launcher, music player, and so on.
The idea is to keep complex functionalities (camera, tv, etc) needing full screen accessible by the manilla bar, and quick&fast features such as logs, sms, player accessible on the main screen.
Nice idea, man
Hi there,
just a thought on a possible gui for the UI, instead of tabs, layers (don't know if that's possible, but it would be very cool imho)
you could have multiple layers, and have the layers in the backgound fade out and become smaller (perspective) and use a swipe up or down to navigate
Anything happening on here?
Just wondering
SinnerNL said:
Hi there,
just a thought on a possible gui for the UI, instead of tabs, layers (don't know if that's possible, but it would be very cool imho)
you could have multiple layers, and have the layers in the backgound fade out and become smaller (perspective) and use a swipe up or down to navigate
Click to expand...
Click to collapse
great idea!
like the game u can get on Playstation 3... where u 'swim' around collecting stuff and going thru lvls....
I'm thinking that the Ximoon idea is quite good but one thing that should be included is landscape option and I'm not talking about TP version but one with the same functions like the portrait one
I like the idea of the circular menus...
well first of all thanks to you guys you are doing awsome work and its always funn spendin my free time in your forums
now to my idea
does anybody know the film : the lawnmower man? theres one scene almost at the end of the film where he tries to escape to the internet i think the idea is quite amazing movn in a bowl and havin litle windows to select.
what do ya think
this is the link to the movie scene just skip it forward to about 5 minutes
Edit: sry forgot the link :http://www.youtube.com/watch?v=doAnB5_eDnw&feature=related
Hi guys,
I have released new yrgo 2.3 beta 5 so you can check it out on my forum here.
If you are new in yrgo - yrgo is highly customizable User Interface Shell written for Windows Mobile 5/6 Professional devices. It allows much more that any other Shell and goes more deep into the system - the memory footprint is also held low.
I highly recommend to see the presentation video (the video was recorded with older version - doesn't have as nice graphic as it is there now and it has much less functionality, but it is good to understand yrgo's concept).
So let me know what do you think .
UPDATED: There's a bug in the version I linked to my forum - it has only Czech version. Please scroll down the thread there, download English.zip a follow the instructions in the post to get the English version working. Sorry for that.
Regards,
Luky
Oh yes,
the gadgets for almost all resolutions are not arranged properly - it is still the beta version and I will work on this this week.
But you can of course easily re-arrange it however you want very easily (just check the video I have mentioned above).
Thanks.
Luky
it is really nice and fast. on start up there was too much gadgets on screen, I would say try to make the desktop really clean aligned properly on startup. but it's a good work you're doing.
I'm not sure if this is a bug: using the file manager to explore my windows directory seems to hang the app, or maybe my windows directory is just really big. after it hanged and I terminated it manually, the app still populated my top and bottom bar, and half my screen, I had to soft reset.
plus how to change background?
Hi,
thanks for your feedback. I'll check out the problem with Windows folder.
To change the background image, just find such image in the yrgo's file explorer and use Context menu and scroll down to get ability to use such image as a desktop background.
Regards,
Luky
I really like your app. your design mode is very innovative, resizeable icons, etc.
*why the "hide" button? after going deep in the settings and want to go back to the home screen I had to click back button all the way back to home. it is possible to make the hide button "home" button so one click will bring me back to home? I know I can click on an empty spot and it will bring me to home, but I don't think everyone will know that.
*when not in full screen mode some of the icons/info is cut off at the bottom because the icons\layout doesn't resize accordingly.
*is it possible to add the "running applications" button as a gadget?
*also could there be some transition effect from desktop to desktop?
know I'm asking for a lot but I wouldn't be saying anything if I didn't like the app.
Hi,
thanks for your feedback. It's ok, your questions are really relevant and helpful for me.
Yes, you're right. It makes more sense to have button "Home" instead of "Hide". I'll change it.
I know about the problem when switching off the full screen mode. The previous version had auto-rearraning the gadgets but it made a big mess when you switched from landscape/portrait mode so I temporarily removed it.
Yes, running appliactions can be add to the desktop easily - as any other item in yrgo - just 'tap and hold' on the Running application icon a use "Add to desktop"
Yep, some transition effect would be nice - but at this moment it is not my priority. I need to release current 2.3 as soon as possible. After that I'll start to think about new feature.
Again, thanks a lot for your feedback- it was very helpful.
Regards,
Luky
Hey guys,
XDA developers obviously has some of the best mobile phone developers, so I thought I'd give suggestions for any bored coders on ideas I have for panels on the new 6.5 interface.
The WMP panel is pretty useful apart from the fact it only applies to WMP, there's a S2P alternative which I think is a good move but wouldn't it be better to create a program that lets you pick the player of your choice (e.g. S2P) from a list and then it will display the information and controls for that player. This means would mean less single players panels and a more all-in-one solution.
To this day I do NOT understand why tasks are such a pain in WinMo, on my old N95 tasks it displayed tasks on the today screen or atleast the amount I had stored. I think there's already something of this nature on the forum so ignore this one.
A quick lauch would be great considering the old 6.1 start menu was like that, but I'm not too sure if many people will want this feature back.
That's all of the ones I can think of, but if I get more I'll update this thread. Please state any thoughts or opinions you have .
150+ views and not one opinion! Geez.
I don't know if anyone has used the i8910 HD but the today screen work/looks really good and the fact there's a lock button on the today screen I think is a good move, maybe a lock panel on 6.5 would be a good step forward.
150+ views and not one opinion! Geez.
I don't know if anyone has used the i8910 HD but the today screen work/looks really good and the fact there's a lock button on the today screen I think is a good move, maybe a lock panel on 6.5 would be a good step forward.
There are already QuickLaunch plugins for Titanium.
The music plugin would be a great idea, but unfortunately, I think it would take up too much space and too much developing time. I think we should develop the ones we have first.
There's one thing I wish Microsoft added to 6.5, unfortunately, I don't think there's much we can do about it on XDA. I think if we added the ability to hide the Titanium panel and easily open it again. Maybe if they took like the Hide/Show Desktop button from Windows 7 (the rectangular one) and added it to the left side of the home screen. So you hold it and slide it out, and the Titanium Menu unfolds... I'll have to work on mock ups of the idea in Photoshop.
I think an RSS plugin would be awesome
apreichner said:
There are already QuickLaunch plugins for Titanium.
The music plugin would be a great idea, but unfortunately, I think it would take up too much space and too much developing time. I think we should develop the ones we have first.
There's one thing I wish Microsoft added to 6.5, unfortunately, I don't think there's much we can do about it on XDA. I think if we added the ability to hide the Titanium panel and easily open it again. Maybe if they took like the Hide/Show Desktop button from Windows 7 (the rectangular one) and added it to the left side of the home screen. So you hold it and slide it out, and the Titanium Menu unfolds... I'll have to work on mock ups of the idea in Photoshop.
Click to expand...
Click to collapse
about showhide desktop button
if you have used manila 2d there was 1 such app(manila control) for which would hide manila and return to normal today screen and vice versa
maybe someone can do it with titanium
or maybe second today(the name of app is "second today") will work
Good to hear people's ideas.
The launcher does it use MortScript I was looking for something more stand alone.
For what it's worth, i would really like to see an Overclocking utility plug in for wm6.5 I use homescreen but i hate not to be able to see the cpu speeds and temperature in the plug in, i cant even tell if homescreen is working when its unchecked and the default titanium plug in is enabled.
O and O said:
Good to hear people's ideas.
The launcher does it use MortScript I was looking for something more stand alone.
Click to expand...
Click to collapse
CLauncher uses Mortscript to set up but can be changed and be set up directly in the registry.
GLauncher from gullum does use an own Editor and supports more pages, moreover you can set one program to start from the panel, displayed on the left icon (pictures in the registry) and another set on the left softkey and displayed on the icon top right (icon in the registry).
Ok, I have a few questions that should have easy solutions that I just can't find... probably because what I'm looking for is pretty specific. Hopefully I can get answers to at least a few of them. I will start out by saying that I am currently running the Energy Reference ROM on a Touch Pro 2 (with plenty of RAM I might add). As I find solutions, I will post them below under the "Resolved" section, just in case someone else needs help as well.
Questions:
----- How do you change the color/skin of the stock dialer? The only one that I found searching was the "dusk" dialer... I'm looking for something that I can change the color of some of the buttons (to blue or something)... someone has to have a CAB with a bunch of different colors???
Resolved:
----- First... how do you change the panel backgrounds in SPB Mobile Shell 3.5.5? I'm not looking to add widgets... not looking to change the background of the Today screen (already have done that)... I'm looking to change the background of the panels ONLY. Without changing the layout of anything. Just the panels. I have tried a few programs/skins (Vostradamus, etc.)... and I just can't figure out how to do this simple thing with them. So I'm hoping there's an easier way (registry edit, setting that I'm just not seeing, etc.).
Fix: ----- http://forum.xda-developers.com/showpost.php?p=4766529&postcount=730 (make SURE to use WinZip, NOT WinRar or anything else)
----- Second, for some reason, I can't see the settings of "Smartlock" in the SPB settings view (as in, if I go through SPB Mobile to get to "Settings", Smartlock isn't there). However, Smartlock is visible when I switch over to the "stock" Start Menu. So is there any way for Smartlock to appear in the SPB Mobile "Settings" tab? It's pretty weird that it isn't there (ALL of the other programs/settings functions show up, but not Smartlock).
Fix: ----- This fixed itself after a clean reinstall of SPB Mobile Shell 3.5.5.
----- Is it possible to keep all the "stock" icons up on top of the screen and add the clock display?
(I currently have the "data" icon, "signal strength" icon, "phone volume" icon, and "battery" icon... with room for the "X"/"OK" icon when a program is running)
I am looking to keep all of those icons while adding the clock display. Don't know if it's possible, but I thought I would ask.
IF it is possible to put the clock up there, would this be compatible with "Brian's Taskbar" to make the icons colorful? I don't have it on there yet, but I'm just wondering for future reference.
Fix: ----- http://forum.xda-developers.com/showthread.php?t=612083 (Battclock program... I'm still trying to figure out how to perfect it though). Doesn't appear to be very compatible if you have multiple backgrounds/different screens... but it'll work on at least one of the screens.
----- In the "stock" contacts, there are a few different "filters" (viewed via the menu button). To avoid duplication, I would like to have it always set to "Device Conacts", rather than "All Contacts" ("All Contacts contains SIM and device... which results in duplication). You can change it temporarily but selecting "Device Contacts", but when you re-enter it, it automatically switches back. If anyone knows of a way to permanently/by default choose "Device Contacts", that would be what I'm looking for.
Fix: ----- Registry edit... HKCU/Control Panel/Phone/ShowSim (change from 1 to 0, and they will be gone).
I can help with "third"... look at battclock. It is completely customizable and completely great. Alternatively, there is an option in the settings to display just a clock instead of battery meter in the task bar.
For the "first", try this post from the tips and tricks thread (may need to back out and read some surrounding posts to get a better idea)
cbeck said:
I can help with "third"... look at battclock. It is completely customizable and completely great. Alternatively, there is an option in the settings to display just a clock instead of battery meter in the task bar.
For the "first", try this post from the tips and tricks thread (may need to back out and read some surrounding posts to get a better idea)
Click to expand...
Click to collapse
Thanks for the suggestions.
I'm looking into the Battclock program, so I will update when I figure that out.
Thanks for showing me that thread for the "first" issue... that led me to the link that I posted in my first post, which is for 3.5.5 (I'm sure they're both the same... but the link I posted makes it pretty easy to understand I think).
Still looking for a solution for the color of the dialer/dialpad. I think I'm just going to have to either delete all of the SIM contacts and same them on my computer (to upload later when I switch phones or whatever).