Hi, I come on here quite a lot for information as it's an amazing resource! This time however, I'm attempting to give something back!
I experienced the "black screen on slide out" on Monday. Phone completely screwed. I've also had a few droppages and had it apart once before so there's no way warranty is gonna help!
I stripped it down and soon discovered what it is that actually fails on the ribbon. The coating had worn through due to rubbing on something during the slide out / in process. it had been playing up for a while, probably due to shorting out on the metal case, but now the tracks (aluminium?) had worn right down.....
In pic 1 i've circled the worn area. The shiny section is where i'd tried taping over it to prevent shorting, before i realised the tracks were gone.
Got an almost new one off ebay for 15 quid and, realising it was going to happen again, came up with a solution that, so far, looks like it will work....
A while back I bought some "anti rattle felt" for my car's dashboard - really thin and strong self adhesive felt to prevent squeaking joins between dash sections. I cut a piece of this and stuck it to the new ribbon. Once this stuff is on it's well stuck, by the way!
See pic 2 for the modded ribbon cable.
On reassembly everything is working just fine so far! Here's hoping that it lasts longer than 6 months this time!
Just need a new casing now as mine is decidedly second hand!
Hope this turns out to be of use to someone!
cool story bro
when i took apart my xperia to replace the housing this seemed like a really weak point in the device. glad to see someone who has had the problem has been able to fix it
Why does the screen go black?
Hi,
When the coating wears off the ribbon cable it exposes the tracks in it. when you slide the keyboard out the exposed tracks short out on the metal casing and the screen loses it's input signal.
thats whats happened on mine at least and i presume quite a few others?
HTH!
Update:
That's interesting: My phone was also losing signal with the keyboard out, and occasionally while closed up as well. It would just randomly drop to "no signal" for a few seconds.
It hasn't done it since replacing the ribbon cable.....could be coincidental of course.
I'm having the same problem
It just started a week ago and I got the phone in January off of ebay. I'm new to opening up the phone so could anyone help me find the correct tools or have a link to a site with pictured instructions?
I noticed that the sliding mechanism started to go loose about 4-5 months ago but didn't expect the screen not respond in landscape mode. I have yet to see the other symptoms you all are referring to. I would like to fix this before it get worse.
In mine case it went totaly black after one week of this problem... You have all the instruction on youtube, there is where i looked. For tools you can be inovative, but the exactly right ones come with housings from ebay, it is only 15EUR, and i bet you have some cracks so it wouldn't hurt replacing. That is what i did, along with ordering new sliding mechanizm, and new ribbon cable.
I am open for ideas to prevent my ribbon cable from being cut at it weakest point again.
I'm assuming my flex ribbon went bad yesterday, since sliding the keypad out causes my screen to shut off.
Already ordered a cable off ebay and will attempt to replace it myself :O
Replaced my flex ribbon cable with one I bought on eBay. The screen doesn't turn on at all now, which leads me to believe the cable I was sent is defective. Put the old one back in and it works okay, less landscape mode. ughhh what a pain.
great tips! my input is I bought a case off of ebay that was ~60$ and everything actually fit fine for me...so I wouldn't discount every seller but you do get what you pay for, the 15$ cases are probablly the ones that will give you problems
I working in a mobilephone repair center if anyone need help drop me a priv... i able to get 2nd hand or even brand new components
Replaced the flex ribbon cable -
I got my flex ribbon cable a few weeks ago and took it to my local repair shop. They replaced it but the LCD screen/optical joystick receives no power. The touchscreen and everything else on the phone works just fine now. I thought it was a defective item so it was exchanged with a new one.
Got the repair shop to replace it again and the outcome still remains the same as the first.
Theres no light coming from the screen nor the side illumination.
I just told the repair shop to just place the original back in for the mean time.
Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power botton.
Could it be defective a batch that the seller was sending out? or the repair shop's mistake and is playing dumb so they do not have to admint fault?
Hopefully there's an easy fix to this problem.
-Also I did inspect the ribbon before and after the repair. looks new as the OEm
Can anybody help me out with this new problem after replacing the cable -
perhaps you should try a hard reset. Ive had problems in the past where the optical joystick and the illuminators did not work, and that worked for me.
On the other hand, the top illuminators are on the same piece of hardware as the flex cable that was replaced, so a faulty flex cable is possible. The bottom illuminators are on the circuit board that the optical joystick attaches to, separate but connected to the flex cable.
Ive recently replaced my flex cable and touchscreen. The experience i had with the faulty touch screen was that it appeared to receive no power, but was in fact displaying a dark backlit illumination that could only be seen in the dark. At the same time however, the screen did not display anything. I'm not sure if this is similar to your experience, but if so then your touchscreen would need to be replaced.
ive done all repairs on the xperia myself, and one thing ive discovered is if something doesnt work right after a repair, simply disassembling it and reassembling it to make sure all the connections are properly done has worked for me in the past.
"Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power button."
Now when you say the power button, do you mean that a red light appears under it?
I dont know if i can come to a conclusion or that i can help (or have helped) you come to a conclusion, but i can only assure you that the xperia acts out in strange and weird ways.
Good Luck!
Tags
Dismantle / Disassemble Sony Ericson Xperia X1
http://www.ifixit.com/Teardown/Sony-Ericsson-XPERIA-X1/788/1
http://www.formymobile.co.uk/xperiadisassembly.php
http://www.youtube.com/watch?v=AWDurQrRt-Y (REAR)
http://www.youtube.com/watch?v=iyGUbxFqvyc&feature=related (FRONT)
http://www.youtube.com/watch?v=elgC8hwHfYQ&feature=related
For info.
Mike
Thanks for the links. I've tried the hardreset and restoring the original rom but the issue is still there. It's really bugging me that everything works but the LCD screen. I'm currently using MyMobiler to use my phone. The touch screen works fine and so does the soft keys. Just no power for the lights. I might just give up and wait for another phone that catches my eye and then tinker with the xperia myself. but if anyone got a solution or want me to test something then I'll give it a try.
My warranty is no longer affective so I'll use my phone as a tester to help others with any problems.
TRIONDAVE, how's your Xperia running now with the cable mod that you did? Its been 6 months since you created the thread. I hope you're still around.
My Xperia X1 works nearly fine, except for the keyboard issues, so I'm thinking of opening it up. If your Ribbon mod helped I might just do it too once I've got it opened. Mine has a MOUNTain of cracks though, and the battery compartment itself is cracked on both side enough to make the compartment CURVED. Hence the Battery cover doesn't sit well.
I'm looking around for broken Xperias which I might be able to use to change the internal cracked casing. Lets see.
DatDereX1 said:
cool story bro
Click to expand...
Click to collapse
My thoughts exactly.
Hello guys, I am in need of real help over here!
Its just that Ive replaced my ribbon cable, the old one got screwd up.
However I got done for 10 minutes ago, tried to start up the phone.. without success :,(
The ribbon cable doesnt have anything to do with the start up, only the screen am I correct? Cause I cannot even start my phone..
Ive connected the charger, but when I remove the battery it shows a red light, meaning no battery, correct?
So what may the problem be exactly? Maybe the battery is all dead, or?
PLEASE HELP!
for the people with ribbon failures how long have you had the phone before it occurred ? im just interested on the cables lifespan.
mine is fine so far but i have noticed the slider is flimsy and rocks left and right.
Hey guys,
I have a problem. A week ago I dropped my hd2 and the screen was smashed. I took it to the service and they replaced the digitizer. Now, as it turned out the lcd displays badly and the say it has to also be replaced. I know that after the drop the lcd worked fine. Now it looks like this: http://img857.imageshack.us/i/imag0001u.jpg
My question is - is this broken lcd? it has to be removed? or can I do something with it? is it the fault and they've done something wrong?
Thanks for answers.
Read this post by XDA member Facdemol, this post will help you answer your question.
emjakmaciej said:
Hey guys,
I have a problem. A week ago I dropped my hd2 and the screen was smashed. I took it to the service and they replaced the digitizer. Now, as it turned out the lcd displays badly and the say it has to also be replaced. I know that after the drop the lcd worked fine. Now it looks like this: http://img857.imageshack.us/i/imag0001u.jpg
My question is - is this broken lcd? it has to be removed? or can I do something with it? is it the fault and they've done something wrong?
Thanks for answers.
Click to expand...
Click to collapse
Unless they just haven't connected the LCD properly (very unlikely), there's definitely a problem with it... I'm afraid I think it'll have to be replaced.
in turkey if there is a digitizer problem they change the whole screen.
Under the TMOUS warranty they will replace your phone if an issue comes up like that because it's usually just an unlucky roll of the dice if your LCD does that.
because your problem seems to occur after a mechanical shock, i would suspect 2 scenarios.
1. You have a bad connection between the display flex connector and phone's motherboad. This can either be caused by motherboard display connector failure, some small pins on that connector got busted when the phone was either dropped or once the digitizer was changed. I give pretty small chances for this to have happened.
2. If you see a phone lcd stripped down of it's housing, you will notice that on the bottom part of it (or lateral one on some displays) you can see a flex cable coming from the display's glass-like surface to the back of it. It sits pretty tight around one edge of the screen. It connects the TFT matrix to the processing part (column&row controllers) on the back of the display (or on the flex cable/phone motherboard .. ). If a phone is hit from one side, the case and display housing can press hard on this flex cable and break it, or puncture it. In this case, some of the signals needed to drive some specific areas of the tft matrix aren't getting to the matrix itself so you see some lines on the screen (plus color rendering errors). Sometimes, improper manipulation of the screen when assembling back the phone can also cause the problem.
I give more chances to this scenario.
If number 1 could be fixed by a simple phone disassemble and connector checking, number 2 will indeed require a new display as there isn't any way to service that broken flex cable.
My previous posts about display problems tried to focus on "naturally occurring" problems, not ones induced by electric/mechanical shocks. So in this case, my above scenarios will be more suited as likely suspects for your problem.
Ok, I recently fell on my HTC Trophy(Verizon Version), cracking my screen. Before that happened I had a weird LCD problem that came out of nowhere. I replaced both the touch digitizer and LCD screen successfully and turned it on. It worked perfectly. No screen defects ect. Then I later turned it on and the same problem happened! Here are some pics to show you. Do I need A new LCD (oh god) or can I fix it? any answers will be much appreciated. Also, the auto thread search thing is wonderful, great idea!
EDIT:I can't see the spots when the LCD is off.
When I was doing a laptop LCD replacement screen, I had accidentally left a bubble and was so annoyed that it would not display where the bubbles were.
However after 2 weeks the bubbles just disappeared and the laptop's LCD screen was working correctly.
You might want to wait a little longer and see if the heat will evaporate it?
(Good luck)
hey,
i've done several searches and cannot find any threads on a fault i'm having.
http://www.youtube.com/watch?v=RSL1-Bsy5pI
Vid of completely stock nexus 7 not rooted exhibiting ambient light sensor/backlight issue. Screen dims beyond point where screen is visible when auto brightness is used or level is adjusted below 40%
UPDATE 11/10/13
ASUS are a joke. Tried to have it repaired as a manufacturing fault. They weren't having it as 6 months out of warranty. And there's rubbish 3rd repair centre TRIAGE SERVICES LTD claimed it needed a new main board as it was a light sensor fault at the cost of £207.06 (i could buy the new 2013 nexus 7 cheaper). I told them where to go with that and asked for my tablet back which cost me £35.
I bought a replacement board and fitted using the amazing guides on IFIXIT.COM
And guess what? same issue
2 possibilities here either replacement board has exact same fault (unlikely) or fault is else where (LCD assembly)
There is no way i've found that you can calibrate the screen using the tablet, not sure about other methods
I may try a new screen
UPDATE
Spoke to TRIAGE SERVICES LTD again shortly after changing the board and after a lot of longwindedness they say they have a way of reseting the screen although it not guaranteed to work and will cost £50 if it does or £35 to return if it doesn't. (why they did not try this when they had the tab is beyond me). I'm relecutant to send to them as every search i've tried to reset the defualts on the light sensor show nothing.
Now i know on the samsung you can get into a hardware test mode by dialing *#0*# wanted to know if there was a similar mode on the nexus 7. At least that would let me confirm and reset the values for the light sensor.
also when shining the LED flash on the sensor at close range when on auto brightness the screen does auto brighten.
Can anyone help me diagnose this further other than just changing the screen? i knew there are a few people with this fault
UPDATE I have tested a few hardware tester apps on the tab and they all show the light sensor to be operational and responding very well to light changes.
I'm wondering if there is some kind of CMOS in the display assembly or failing that the display driver are fooked.
When android is updated are the drivers also?
Does factory reset include drivers also?
Will flashing the rom via fastboot reset the drivers?
any help is greatly appreciated
Hello, I recently attempted to replace the USB flex cable on my D800, because the original touch screen turned on, but the touch was inaccurate and had dead zones. I would touch one place on the lock screen, but the circle would appear in a different area instead. (The top half of the screen was pretty accurate, but lost accuracy from the middle and down.)
So, I ordered another flex cable for the D800, same as the original (labeling and everything). However, the new flex cable wouldn't register any touches at all. The display would turn on, but no touch. So I reinstalled the old flex cable and the touch worked, just not correctly. Faulty new cable?
Anyway, at that point I thought, hey, maybe it's the digitizer, so I got a new LCD+Digitizer assembly for $44. I installed it and it turns on fine, but still has touch issues with the original flex cable, and no touch on the new flex cable.
So... does this just mean that both of my flex cables are faulty? Or is it something else? Because it's definitely not the digitizer.
Extra info:
1. I factory reset the phone several times but no improvement, so I don't think it's a software issue.
2. I bought the phone second hand for $80; needed a battery replacement, because the screen wouldn't turn on and had a blinking red light.
3. Oddly enough, the battery that was inside it when I bought the phone was manufactured in 2014, even though the phone itself was used and fairly old, so I assume the original owner had opened it once before.
4. Looking at all the parts inside the phone, they're clearly labeled as D800/801. However, I managed to get through the settings to hardware info and it says the model is LG-D802T (Australian model?). I don't know what's going on.... ugh
same problem ... with no fix yet