Database Users

Overclock your GENE (HOW?)

How can I overclock my gene ?

over clocking gene
there are different ways brother , you need to basically install softwares like Omap or there is a different one which is slightly advanced ,also give you battery status info.....
but make sure you not boost it up more that 40 % of your default clock speed as it is not reccomended...................

Bro'
What are the advantages & disadvantages of overclocking.
Thanks....

rex4u said:
Bro'
What are the advantages & disadvantages of overclocking.
Thanks....
Click to expand...
Click to collapse
Advantage: Your system will run a Hell lot faster (you will love it )
Disadvantage: Slight battery performance detoriation .

be carefull Overcloking
hi
this is just for ur info ie if u value ur phone i do have this omap my 3400i as im using sumits vanilamanila but i was told that over cloking could damage ur phone so do be carefull ask around and then do it
this is for ur info
rex4u said:
Bro'
What are the advantages & disadvantages of overclocking.
Thanks....
Click to expand...
Click to collapse

You can safely overclock your CPU upto 20% of your CPU speed that is upto 240MHz. But its better to use CPU scalar as that saves battery life.

Overclock
bryangopan said:
there are different ways brother , you need to basically install softwares like Omap or there is a different one which is slightly advanced ,also give you battery status info.....
but make sure you not boost it up more that 40 % of your default clock speed as it is not reccomended...................
Click to expand...
Click to collapse
Would you mind telling me where to get these utilities?

i tried two times for overclocking and my sim card got corrupted both time.
so in my case it kills sim card.

deepv84 said:
i tried two times for overclocking and my sim card got corrupted both time.
so in my case it kills sim card.
Click to expand...
Click to collapse
Whoa..
Heard that first time..
Had once overclocked mine upto 240Mhz for some 15 min or so..
The phone is quite responsive then but drains battery fast and gets hot fast..

Over clocking is good but not recommended becoz it degrades the Battery life and heating of phone and circuit board...!!

overclocking is vry dangerous......it can harm ur gene,so be carefull while overclocking ur gene......

If someone does overclock, then do share your experience as its dangerous so share if you did it successfully.

Hey guys try this and run ur jade at 768 mhz

hey try this and overclock ur jade .......
http://forum.xda-developers.com/showthread.php?p=7181179

izit safe or nt???

pteek said:
hey try this and overclock ur jade .......
http://forum.xda-developers.com/showthread.php?p=7181179
Click to expand...
Click to collapse
hi
i think 30 to 40% is the advised overclock speed
so be careful u could fry ur chip and kill ur phone
good luck

calebhii said:
izit safe or nt???
Click to expand...
Click to collapse
as haree said 30 to 40 % is safe ..
and these new msm chips are quite good ppl are safely
going up to 800 mhz!!! but i suujest 710 mhz..

calebhii said:
izit safe or nt???
Click to expand...
Click to collapse
hi
around 20% should be safe but them i have not done it as i did not see the need to boost my CPU speed so the risc is always their dont do it if ur not comfy and scared that u might spoil ur phone

Don´t work on jade

[Q] LV or SV?

when overclocking which one is best for beast mode?
LV or SV?

LBOG_Kush said:
when overclocking which one is best for beast mode?
LV or SV?
Click to expand...
Click to collapse
LV or SV? I am taking it you are using Faux's kernel in that case LV means low voltage and SV means stock voltage. Which has more to do with power efficacy as lower voltage will be more battery consumption friendly. Far as the OC thing goes they are both sharing same enchantment as they don't differentiate. So try LV first and if it does not bootup as not all chips are same then try SV.

thanks for the info and yes they both load up fine
but in LV my phone isnt that hot as it is in SV
weird? because u say LV eats up more battery so its working more right?
idk but thx good info nice benchmark score
what would be the best scaling for overclock
i run performance at 1.84 the whole day seems to be working fine
but like to here info from anybody

LBOG_Kush said:
thanks for the info and yes they both load up fine
but in LV my phone isnt that hot as it is in SV
weird? because u say LV eats up more battery so its working more right?
idk but thx good info nice benchmark score
what would be the best scaling for overclock
i run performance at 1.84 the whole day seems to be working fine
but like to here info from anybody
Click to expand...
Click to collapse
I know i'm going to stand alone on this one.
Unless you are trying to prove something to someone or get stupid high Quadrant scores there is no real reason for overclocking your phone.
I'd recommend backing down from 1.84 and using something less than 1.5.

LBOG_Kush said:
thanks for the info and yes they both load up fine
but in LV my phone isnt that hot as it is in SV
weird? because u say LV eats up more battery so its working more right?
idk but thx good info nice benchmark score
what would be the best scaling for overclock
i run performance at 1.84 the whole day seems to be working fine
but like to here info from anybody
Click to expand...
Click to collapse
No I said LV uses less power where SV is using little higher voltage. If you want balanced device I would recommend you use LV. Far as scaling to max @1843mhz all the time goes it will have adverse effect in long run. BTW only reason your phone is running hot is because you have it scaled at max frequency.
HKM said:
Well yes if you OC you are in danger of frying the SoC due to heat as you might know from middle school when thinks are hot they expend and when its cool they contract. So this consent extend/contract cycle has impact and can fry or crack the circuit in long run thus limiting the life expectancy.
Now that being said OC does have its power more for us its the control so we can manually increase the power when needed like I do to conserve battery power and underclock it when power is not needed as it will waste battery. Based on how you have setup you can setup mCPU profiles but make sure when its idle (screen off) you have the lowest min frequency selected.
Click to expand...
Click to collapse
neidlinger said:
I know i'm going to stand alone on this one.
Unless you are trying to prove something to someone or get stupid high Quadrant scores there is no real reason for overclocking your phone.
I'd recommend backing down from 1.84 and using something less than 1.5.
Click to expand...
Click to collapse
No we all share that as no need to scale to max when not needed that way you only kill more battery and slowly wear out the SoC. lol but ya if you are showing off your phone to your friend then scale it other than that I don't see what anyone need to run at MAX scale for 24/7. I personally have my setup underclocked.

wow thx for clearing it up
yes max is on 24/7 for couple more days
just testing how well it can work
so ill guess ill stick with LV for now
since ill be out IT'S FRIDAY
THX blackshelf and others
again if u have info on scaling blackshelf you'll make me smile again LOL

[Q] Safe overclock mhz

Hello this is my second post.
I downloaded yesterday the app "WinMoSpeed" and i am wondering how far i can go with overclocking. I really don't want that my blackstone bricks. So what is a safe level of mhz i can set ? Currently it's set to 576,0 Mhz, but i don't know if that's too high or too low so i can go further. Please help .

hi, i have pushed my blackstone at 730mhz, but sometimes hangs, and I need to softreset.
Using it a 653 mhz works fine for me, but depends a lot on hardware, someone can overclock much more than others.
I do not think it could brick your device, only thing it could happen is a device hangs, you can solve it with a soft reset.
I've installed the overclock software on sd card, so if you mess up something you need just restart your device without the sd card and the frequency is set to default.
Hope i'd help.
bb
PS. I DO NOT TAKE ANY RESPONSABILITY IF YOU OVERCLOCK YOUR DEVICE AND DO SOME DAMAGE.

In my experience safe overclock speeds for everyday use are 595 to 633. No overheating. No lockups.
Also it will not have a significat impact on your battery life.

Hi it's running at 710 mhz now, but my battery drains like hell. Is it because overclock or S2U2 ? I installed S2U2 at the same time with overclock.

In my opinion if it's for 100MHz it's really not worth the shot

Also, if you're also using Android maybe you wanna check out this thread:
http://www.neopeek.com/viewtopic.php?f=70&t=7501

Yves_Stylez said:
Hi it's running at 710 mhz now, but my battery drains like hell. Is it because overclock or S2U2 ? I installed S2U2 at the same time with overclock.
Click to expand...
Click to collapse
710 MHz it's quite a OC, of course your battery it will drain a lot. I think that on about 650 MHz it enough for a snappier device and for a good battery life.
hope i help.
bb

A question. Have you ever thought how many months will last after overcloack mobile phone? I think it will not last long ...

Halsahaf said:
A question. Have you ever thought how many months will last after overcloack mobile phone? I think it will not last long ...
Click to expand...
Click to collapse
+1
Take in mind that probably you will shorten the CPU life.

I tested on 614 MHz with no notable battery draining. It's about a 15~20% more than standard 528 MHz so I think it's enough to the poor Blackstone.
BUT I ALSO tried to create other "underclock" settings, so that when I sleep or rest, I leave the device "resting" like me (I need the phone running 24h/24). I tried that it will run not far of 200 MHz and I hope this will help the Blackstone life.

for the overclocking in android any aplication?

dewasha said:
for the overclocking in android any aplication?
Click to expand...
Click to collapse
Hi, I'm not the best person to answer, but I think the android versions for this phone already comes with overclocking. Because the mobile phone quite warm at the bottom (like when we overclocked), and when I'm on windows mobile and pitch for the android when it is overclocked it will not let me open the andoid, a freeze of the mobile phone and need restart.
But what I think is probably a person becomes more knowledgeable than me to answer.

is possible overclock in android 2.2.2 with set cpu in the blackstone? thanks

Has anyone overclocked the Froyo build?
What's safe?

is it safe to do that ???

i was having a problem when playing hd games .... the device got very hot and the battery temp reaches about 45
finally i solved this problem using tegrak to set cpu speed to 200 min : 800 max
no heat any more
but i need to ask is it safe to change it in games only and return it normal (1200 mhz) all times and return it back to 800 when playing games ??

Shouldn't be a problem doing that, the game might Not be as smooth or whatever though. 45 is not too high by the way, it's just scary because you can actually feel the heat on this phone more than others...

666fff said:
Shouldn't be a problem doing that, the game might Not be as smooth or whatever though. 45 is not too high by the way, it's just scary because you can actually feel the heat on this phone more than others...
Click to expand...
Click to collapse
but it is a great feelings that ur phone is still cool after one hour of playing
and the game still smooth as usual no any difference
and now i m running stability test it reached 46 minutes and nothing wrong
but my Q is if i returned it to normal after gaming and return it again to 800 when playing games is there any problem or what ..... i just notice very slight difference in loading but not in performing so i dont want this difference in loading i want to use the full power of the device without heat

Jeez pal, you underclocked the CPU because temp was 45°C! What was the problem if it were 50/52 or even 55°C? Playing game is a CPU intensive task, so the phone will be hot than any other things (benchmarking included) and that is very NORMAL.
Regards.

ithehappy said:
Jeez pal, you underclocked the CPU because temp was 45°C! What was the problem if it were 50/52 or even 55°C? Playing game is a CPU intensive task, so the phone will be hot than any other things (benchmarking included) and that is very NORMAL.
Regards.
Click to expand...
Click to collapse
i knwo it is normal but it is very annoying
the battery temp is 45 and may be more "48 or even 50 " and the processor temp is more for sure and the phone is very hot as it is very thin and i know it is normal but it is annoying to me and to others so i think this is a slotion for this problem
but my Q is if i returned it to normal after gaming and return it again to 800 when playing games is there any problem or what

xdafun4all said:
i was having a problem when playing hd games .... the device got very hot and the battery temp reaches about 45
finally i solved this problem using tegrak to set cpu speed to 200 min : 800 max
no heat any more
but i need to ask is it safe to change it in games only and return it normal (1200 mhz) all times and return it back to 800 when playing games ??
Click to expand...
Click to collapse
i do exactly the same, no problems so far.

rocketpaul said:
i do exactly the same, no problems so far.
Click to expand...
Click to collapse
thx bro but do u mean u underlock when playing and return it back when finished gaming ??? or underlock all the time

Only for 3d games

rocketpaul said:
Only for 3d games
Click to expand...
Click to collapse
thxxxxxxxxxx

By the way guys if u have KH3 stock rom then u have the option to under clock ur device by default
Haha very nice & neat option to save battery life & cool down the handset.
It cap the cpu on 800 mhz, I addition to under clicking the gpu as well (which kernels don't do)
Sent from my super fast GT-I9100 using Tapatalk

drreality said:
By the way guys if u have KH3 stock rom then u have the option to under clock ur device by default
Haha very nice & neat option to save battery life & cool down the handset.
It cap the cpu on 800 mhz, I addition to under clicking the gpu as well (which kernels don't do)
Sent from my super fast GT-I9100 using Tapatalk
Click to expand...
Click to collapse
u do this all the time "800 mhz" or when gaming only ?? as i prefer to leave it 1200 mhz all the time and only while games and intensive use as gps underclock to 800 te decrease heat and battery use
but need 1200 mhz performance in normal processing to perform faster

xdafun4all said:
u do this all the time "800 mhz" or when gaming only ?? as i prefer to leave it 1200 mhz all the time and only while games and intensive use as gps underclock to 800 te decrease heat and battery use
but need 1200 mhz performance in normal processing to perform faster
Click to expand...
Click to collapse
I only untick this box when I fancy:
1- rapidly discharging (battery calibration thing)
2- Showing off the amazing speed of this wonderful device
Otherwise 800 would do every other simple task like ( calling, email, games, browsing...etc)

drreality said:
I only untick this box when I fancy:
1- rapidly discharging (battery calibration thing)
2- Showing off the amazing speed of this wonderful device
Otherwise 800 would do every other simple task like ( calling, email, games, browsing...etc)
Click to expand...
Click to collapse
thats really great the phone now is fast and coool thats very fine and so now i can be satisfied perfectly with the phone

That option does halve the GPU/graphics frame rate from 60 to 30 though, which may not be what you want in a graphics based game.
Sent from my GT-I9100 using XDA App

no harm in lowering the clock speed, the game just won't run as smoothly. the temps of this phone do feel alarmingly high due to the (lack of) thickness.
if it runs fine at 800mhz thats good. undervolt it too and enjoy gaming just that little bit longer

tonymy01 said:
That option does halve the GPU/graphics frame rate from 60 to 30 though, which may not be what you want in a graphics based game.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
thats not really
if u tried to put it on max 800 mhz and tried benchmark u will find that the frame rate that are shown on the corner of screen during benchmark test reaches 60 and more than 60 and the lowest number shown was 50 or 48 and the total score is about 2700
if u remember the galaxy 1 or hts dhd never reached this score only if overlocked and these devices was playing games well with single core processors 1 ghz
so a dual core with 800 mhz with a 4 cores in gpu ....... powerfull result

xdafun4all said:
thats not really
if u tried to put it on max 800 mhz and tried benchmark u will find that the frame rate that are shown on the corner of screen during benchmark test reach 60
Click to expand...
Click to collapse
I am not talking about setCPU here, I am talking about that Samsung "System power save" mode that KH3 has as an option. It definitely halves the gpu rate.
Running quadrant with that option off sees 60 frames/sec, running it with that option enabled sees only 30 frames/sec and if you look at the help/tips for that option you can see what it does (well, they don't give much away about what it does mind u).

Geez....
I have a car that does 150MPH. Is it safe to do only 60MPH?
It does get less hot and uses less power.
DUH