Database Users

Robot Voice/no sound ....

Ok so i have been trolling forums to get this figured out and haven't got there. i am running the stock tmo rom and hard spl 2.08 radio 2.12.50 (was 2.10) downloaded hyperdroid v1.2 and ran it, booted into android and everything was perfect. installed jmz dual boot and it worked also. shut down the phone booted into windows for something cant remember what and now when i boot into android calls dont work, either cant hear anything or hear robo voice. iv tried everything searched in forums and re formated and re installed hyper but cant get it to go away, i really dont want to use a diff winmo rom cus i am not going to use it (plan to just use android) i did notice that when i first ran clrcad i sen somthing pop up but now when i run it from winmo nothing happens as well as jmz dual boot does not work to boot into android even after reinstalling both the app and hyper. my eyes hurt please shed some light...

Seems to be the consensus that the stock rom the reason for the robot voice. clcard does nothing when you press it, it does make the sound work in the android side. All the other things you have seem to be ok

Upgrade your WinMO for FIX
The only way to fix the sound and robot voice is to upgrade your ROM i'm using Energy's TMO Leo ROM by NRGZ28 and HyperDroidV1.2 and I have no sound problems or robot voice.... just upgrade your WM ROM
Energy's TMO Leo ROM by NRGZ28:
forum.xda-developers.com/showthread.php?t=654504[/url]
HyperDroidV1.2 by pongster:
forum.xda-developers.com/showthread.php?t=769026[/url]

This question has been asked MANY times before. A quick search will give you plenty results
The best place to look is here: http://forum.xda-developers.com/showthread.php?t=750780

Thanks for the quick reply's. I in fact spent most the day in this post "This question has been asked MANY times before. A quick search will give you plenty results
The best place to look is here: http://forum.xda-developers.com/showthread.php?t=750780"
Having no luck, i will infact go ahead and flash the energy rom posted by Krazy2pa and see if that works, wich boot loader do you use?

Sofwhitewolf said:
Thanks for the quick reply's. I in fact spent most the day in this post "This question has been asked MANY times before. A quick search will give you plenty results
The best place to look is here: http://forum.xda-developers.com/showthread.php?t=750780"
Having no luck, i will infact go ahead and flash the energy rom posted by Krazy2pa and see if that works, wich boot loader do you use?
Click to expand...
Click to collapse
Honestly bro, don't know if my situation is any differnet than yours, but I also have a TMobile HD2, and the robot voice situation was resolved by flashing a differnet radio. Although I am using 2.12.50.02. (Same one as you maybe?)The only thing solved by flashing a different rom was sleep of death.

So i flashed the energy ROM and so far all is well, is there a way to set it up to auto load android? so i dont have to deal with winmo? i know i know but i dont have the money for a vibrant lol

Something strange happened....
Ok so I'm running FroyoStone V2 with Chuckydroid ROM on Radio 2.12... and I've not had robot voice. But then earlier today my friend called and...ROBO VOICE! So I rebooted and it was gone. Just a bit strange is all that it popped up at random.

[Q] helppppppp!!!

Please somebody help me..... i installed chukydroid room cuz i want droid on my phone but i can't get it...i just want to get back to windows mobile how can i do it????? thanks a lot

chuckydroid is windows mobile. it is a minimal rom that is just mean to boot android quickly via haret. android cannot be flashed to the device at the current time, it can only be run from sd.

Read the ROM section and find the latest stock ROM for your device. Flash that and you'll be back to officialdome.

Hi thanks for reply....could you show me the steps how to do it!!! sorry but i'm new on this and i'm pretty lost!!

deiman23 said:
Hi thanks for reply....could you show me the steps how to do it!!! sorry but i'm new on this and i'm pretty lost!!
Click to expand...
Click to collapse
Read the ROM section
Find the latest stock ROM for your device
Flash that

Have you tried loading android? If not I'd suggest picking a ROM and trying it before you go back to the empire, it really works better & sounds like you're half way there.

[Q] Clarifying Android for my HD2

Hi all,
I was wondering if you guys could help me getting Android on my HD2.
I've been digging this forum for several weeks now, there is so much information that I don't know what to do!
I've got a European HD2, not the T-Mobile one. The reason I would like to have Android running on it is because Windows 6.5 hangs quite often and it's too slow in my opinion.
After finding out how to check my SPL version, I found that I have 3.03.0000. Is it actually possible to run Android on it?
I've also seen some topics about dual boot and switching back and forth between Android and WM. That's not a requirement for me, I actually prefer just running Android without having the opportunity for WM.
Some specification which I don't know it's useful, but I'll post them anyway;
- OS Version; 5.2.21913 (21913.5.0.94)
- Manila-Version; 2.5.20181527.0
- ROM Version; 3.14.404.2 (04666) NLD
- ROM Date; 10/06/10
- Radio Version; 2.15.50.14
I would appreciate your help a lot!
Kind regards,
Jerome

Flash from SPL to HSPL might going to work, but work better with custom ROM along with the HSPL.
Some user reporting that they can run Android with their stock ROM and SPL, but I don't know. Try it. You should wait a few minute for the first boot....possible at least 5.
If it don't work, then I hope you use the statement I mention in the first sentence.

Could you tell me what do you and what SPL and HSPL is exactly?
I don't have much knowledge yet, but I'm willing to learn!
Thank you for your reply anyway!

If you are willing to learn then you best option is to actually read the threads that already exist instead of creating a pointless one.
First go into the HD2 Rom thread and learn how to get HSPL on your phone and a custom rom and updated radio.
After yu have done that come back to the Android sections and learn how to boot android.

First.. Check what ROM you have currently. By the looks of it with radio 2.15.50 you look to have the latest ROM from HTC installed. Unfortunately there is no HSPL Software for the latest ROM from HTC so you will have to downgrade your rom which will let you use HSPL3 (Linkage)
SPL is the "software" on your phone that stops you flashing non HTC Roms. You use a utility called HSPL (above) to install HSPL on your phone to enable you to flash a custom rom.
Once you have HSPL on you can them flash a custom rom from the forums. I use the OzDroid 1.11 as it has been very stable at running android.
Once that is Flashed to your phone you will need to choose which android version you require. I use MDJ FroYo HD V4.3. Download it and copy the ANDROID folder onto your SD Card.
Re-boot OzDroid and you will be presented with the Choose screen. Windows or Droid. Select Android and it will boot into android. You will need to wait 5-15 mins for android to boot on first run.
Hope this helps.

TheATHEiST said:
If you are willing to learn then you best option is to actually read the threads that already exist instead of creating a pointless one.
First go into the HD2 Rom thread and learn how to get HSPL on your phone and a custom rom and updated radio.
After yu have done that come back to the Android sections and learn how to boot android.
Click to expand...
Click to collapse
man its not that easy, if someone has little background knowledge in all this all the unfamiliar information and new terms can be too confusing. Sometimes you just have to ask questions...
...although i do understand that there are probably thousands of posts started by asking the same exact questions ("which is the best android rom for HD2")and that can actually make it that much harder to wrap ones head around.

Do you need WM ROM, or can u run just Android?
TheATHEiST said:
If you are willing to learn then you best option is to actually read the threads that already exist instead of creating a pointless one.
First go into the HD2 Rom thread and learn how to get HSPL on your phone and a custom rom and updated radio.
After yu have done that come back to the Android sections and learn how to boot android.
Click to expand...
Click to collapse
Q: Do you have to load a "custom rom", I assume you mean WM ROM?
Isn't there a way to load Android straight onto the EPROM Memory of your phone, so that only Android runs and not the full WM in the background? Surely that would save RAM and battery?
I found this thread useful, also trying to wade thru the info.
Thanks

farcry27 said:
Q: Do you have to load a "custom rom", I assume you mean WM ROM?
Isn't there a way to load Android straight onto the EPROM Memory of your phone, so that only Android runs and not the full WM in the background? Surely that would save RAM and battery?
I found this thread useful, also trying to wade thru the info.
Thanks
Click to expand...
Click to collapse
no there isnt a way to do this yet without WM on the phone as well.
however, the "full WM" is not running in the background, its just needed to get the linux module started and then boot Android. Nothing is really "running in the background" but it is running from the sd card.
hope some of this helps.

dezaras6 said:
no there isnt a way to do this yet without WM on the phone as well.
however, the "full WM" is not running in the background, its just needed to get the linux module started and then boot Android. Nothing is really "running in the background" but it is running from the sd card.
hope some of this helps.
Click to expand...
Click to collapse
Thanks for the reply.
Is there then a way to get both android and WM on the ROM of the HD2. Since its about 512MB, there won't be space for much else, but that should save the battery, since android wont be running from the SD card.

5haddex;
Thank you so incredible much on helping me here! I've got OzDroid running now, it looks awesome already, now I need to find my preferred Android built, but that shouldn't be a problem.
Again, thank you so much!

I've got OzDroid up and running now, works great too!
But when I try to boot into Android with the provided CleanDROID, or with CLRCAD and hared, the phone hangs after showing the command line;
Jumping into custom kernel...
Click to expand...
Click to collapse
Even when I let the phone untouched for 6 hours, it won't do anything.
I've tried several Android builds, also trying to "repair" startup.txt with CleanDROID which gives me an error too.
Any thoughts? Maybe try another custom rom? Any tips or links on that one?
Cheers
edit;
what about the EnergyROM with Sense 2.5 Reference?
http://forum.xda-developers.com/showpost.php?p=8581816&postcount=3

Anybody please?

I would appreciate your help a lot!
Different Android builds don't fix the problem too. HSPL 2.08 running..

I've changed my radio to 2.10, the HD2 proceeds to the HTC booting logo, but stays there for an hour now...
Any ideas?

Help Help Help Help

Please, i bought the hd2 so i can run Android on, I have been looking for a long time searching on XDA, and all over the net for a solution to my problem " when ever i run android it starts, i customize and download stuff, but when ever i just leave it on standby mode for like 2 or 3 mins, it gets stuck when i try opening the buttons just light up and i have a black screen.... please help me
some people get pissed off repeated threads, I'm sorry i've been looking for a really long time never reached a solution
HTC HD2 TMOUSA 1024
WinMob 3.14
Android MDJ 4.3

HellocK said:
Please, i bought the hd2 so i can run Android on, I have been looking for a long time searching on XDA, and all over the net for a solution to my problem " when ever i run android it starts, i customize and download stuff, but when ever i just leave it on standby mode for like 2 or 3 mins, it gets stuck when i try opening the buttons just light up and i have a black screen.... please help me
some people get pissed off repeated threads, I'm sorry i've been looking for a really long time never reached a solution
HTC HD2 TMOUSA 1024
WinMob 3.14
Android MDJ 4.3
Click to expand...
Click to collapse
sounds like a radio issue to me, have you tried other ROMs, what is your radio version?
Try flashing 2.12.50 or 2.15.50 and you should be fine.

tried the Energy Rom, no good use.. flashing the radio now.... thxx for the quick reply

sure thing, let me know how it goes.
Also, when flashing a new winmo ROM, are you doing a task29?
I have had issues when flashing new ROMs over old ones without doing task29 first, it seems to help a lot.

orangekid said:
sure thing, let me know how it goes.
Also, when flashing a new winmo ROM, are you doing a task29?
I have had issues when flashing new ROMs over old ones without doing task29 first, it seems to help a lot.
Click to expand...
Click to collapse
i got the solution .. u disable the autorotation and set the calibration ... as well i did the radio you told me about ... so i guess one of them did it
thanks alot man

help....hd2

hi guys
pls help me out. i m a new t mobile hd user. have the stock rom. used one week without problem. then phone started to repeatedly get stuck. initially when phone is switched on, the screen wont come on for 15 minutes. but the hard buttons were flashing. this would spontaneously recover. later phone started to get stuck while being used and in standby mode. i thought it could be due to cookie home tab and other software recently installed. so uninstalled all of that, but, no result.
then i accidentally switched to "swype" (i was using the htc keyboard). then it really became mad! needed to soft reset repeatedly. the moment i try to type something ( swype mode is still on. cant switch back to the usual kb, it gets stuck) phone gets stuck, needing soft reset. finallly went for hard reset.
1. is this a known issue with hd2? (somebody told me so)
2. how can i overcome this? would a cooke rom like the energy rom help?
3. whats wrong with swype ????
please, anything to help guys....

Yes if you install a custom ROM especially a Energy ROM you can kiss all that bad behavior good bye, unless you have a hardware problem. But from what you said it sounds like tipicial glitchy stock Windows Mobile bad behavior.
Also to turn off Swype you have to touch on the little triangle arrow beside the keyboard symbol at the bottom of the keyboard. This will bring up a menu box just select to use the standard keyboard and not Swype.

T-Macgnolia said:
Yes if you install a custom ROM especially a Energy ROM you can kiss all that bad behavior good bye, unless you have a hardware problem. But from what you said it sounds like tipicial glitchy stock Windows Mobile bad behavior.
Also to turn off Swype you have to touch on the little triangle arrow beside the keyboard symbol at the bottom of the keyboard. This will bring up a menu box just select to use the standard keyboard and not Swype.
Click to expand...
Click to collapse
thanks again.
the problem is the moment the swype key board appears on screen, it becomes stuck. no key works after that. only option is a soft reset. is it safe to do the rom flash by myself? where can i find a detaild guide to do it? and what rom do you recommend? in the htc site i noted that there is a newer update to my stock rom. how would that rom workout?

If HTC has a update ROM for your HD2 I say go for that one first they should have a detailed set of instructions on the site you download it from. Most ofctge update official ROMs are 3.14 ROMs andcthe 3.14 ROMs are alot more stable considering they are stock ROMs. I do recomemd a Energy ROM if you want to try a custom ROM just read through and look at all the screen shots in the first couple of post in the thread that are by the dev of the ROMs and pick Wichita ROM he had there that you like the looks and sound of best. You can most definitely flash the ROMs yourself be it official or custom.
Here is a tutorial guide for flashing international HD2's.
http://forum.xda-developers.com/showthread.php?t=609477
Here is a tutorial guide for flashing T-Mobile USA HD2's.
http://forum.xda-developers.com/showthread.php?t=653614
Use the guide that is appropriate for the model HD2 you have.

T-Macgnolia said:
If HTC has a update ROM for your HD2 I say go for that one first they should have a detailed set of instructions on the site you download it from. Most ofctge update official ROMs are 3.14 ROMs andcthe 3.14 ROMs are alot more stable considering they are stock ROMs. I do recomemd a Energy ROM if you want to try a custom ROM just read through and look at all the screen shots in the first couple of post in the thread that are by the dev of the ROMs and pick Wichita ROM he had there that you like the looks and sound of best. You can most definitely flash the ROMs yourself be it official or custom.
Here is a tutorial guide for flashing international HD2's.
http://forum.xda-developers.com/showthread.php?t=609477
Here is a tutorial guide for flashing T-Mobile USA HD2's.
http://forum.xda-developers.com/showthread.php?t=653614
Use the guide that is appropriate for the model HD2 you have.
Click to expand...
Click to collapse
thanks very much.
i m going to try the new stock rom first and if its not ok then would try the energy rom. will keep you updated.

kanishkapd said:
thanks very much.
i m going to try the new stock rom first and if its not ok then would try the energy rom. will keep you updated.
Click to expand...
Click to collapse
hi
i have installed the new 3.14 rom. seemed ok for one day. but problems are back. when i switch on the phone, the home screen comes on as normal. after i switch to standby mode and try to start phone again the screen stays blank for about 10 minutes. the hard buttons are flashing though. after 5 min, spontaneouly recovers and again problem occurs when switched off and restarts.
any suggestion pls? do u think i should go for a cooked rom? and in which departments do the cooked roms are better than the stock? can the dutties task manager cause this problem? (i hv it installed at the moment.}
thnaks

I am no expert but ... the radio base band version ( software speaking to the hardware ) is the first thing that comes to mind....mine kept on restarting so i update it to 2.15.xx.xx and it works flawlessly now

kiki_tt said:
I am no expert but ... the radio base band version ( software speaking to the hardware ) is the first thing that comes to mind....mine kept on restarting so i update it to 2.15.xx.xx and it works flawlessly now
Click to expand...
Click to collapse
thanks
my radio version is 2.15.50.14. it cant be the problem? can it?

Do yourself a big favour & try energy ROM such as Dinik 29017 (my preffered version is 23699)
These ROMs are far more touch friendly, far more stable (yet to need soft reset on my HD2 with Energy Dinik 23699) & you will get great support if needed by reading or posting in the thread.
Have a look & read at link below;
http://forum.xda-developers.com/showthread.php?t=591784

same problem

Mister B said:
Do yourself a big favour & try energy ROM such as Dinik 29017 (my preffered version is 23699)
These ROMs are far more touch friendly, far more stable (yet to need soft reset on my HD2 with Energy Dinik 23699) & you will get great support if needed by reading or posting in the thread.
Have a look & read at link below;
http://forum.xda-developers.com/showthread.php?t=591784
Click to expand...
Click to collapse
thanks very much. surely like to try that. but still bit doubtful. if any problem can i get the stock rom back?

kanishkapd said:
thanks very much. surely like to try that. but still bit doubtful. if any problem can i get the stock rom back?
Click to expand...
Click to collapse
you can easily get the stoch rm back if there is any problem ....u should go and install hspl4 on your hd2 and then select 2.08.hspl in the installation window ... and then u can do anything with you phonei.e. put android on it or windows phone 7 if u need any help for that u can just pm me or follow some threads i myself was very scared the first time when i installed hspl but it came out to e very simple afterward

siddharth singh said:
you can easily get the stoch rm back if there is any problem ....u should go and install hspl4 on your hd2 and then select 2.08.hspl in the installation window ... and then u can do anything with you phonei.e. put android on it or windows phone 7 if u need any help for that u can just pm me or follow some threads i myself was very scared the first time when i installed hspl but it came out to e very simple afterward
Click to expand...
Click to collapse
thanks. all you guys. my newly upgraded stock rom has stuck again for the 4th time in 2 days. going to try the energy rom. hope i d be successful.

kanishkapd said:
thanks. all you guys. my newly upgraded stock rom has stuck again for the 4th time in 2 days. going to try the energy rom. hope i d be successful.
Click to expand...
Click to collapse
These ROMs are good, make sure you follow instructions & read up on it before flashing.
Get HSPL 2.08 on your HD2 & make sure your radio version is compatible & then flash Energy ROM of your choice ...
Top tip is charge battery 100% before flashing (seem to reduce battery calibration problems & can be of benefit if you run into problems, also a hard reset after custom ROM has completed first boot is good practice.
Also have some patience & give yourself time to adjust to the new ROM, asking a few questions & doing some searching will be far more productive than flashing to another ROM because of a problem.
Good luck & maybe I see you in the Energy ROM thread ...

thanks very much guys.
i got the energy rom installed successfully and already i m loving it. i m so glad i joined the xda community. one more thing pls. are these roms upgraded? how can i watch out for new upgrades, new features to be downladed...etc?

kanishkapd said:
thanks very much guys.
i got the energy rom installed successfully and already i m loving it. i m so glad i joined the xda community. one more thing pls. are these roms upgraded? how can i watch out for new upgrades, new features to be downladed...etc?
Click to expand...
Click to collapse
to be updated just keep looking out for any updates on the respective rom thread ... since u already have a custom winmo rom u culd try out this android sd build (im just trying to be of some help ) to use it u just have to download and extract the android build to your sd card dont extract it into a folder just extract the full thing to the fist screen u see when u open ur sd card... then just run clrcad first and then haret ...then enjoy ur android sd build to go back to winmo just shutdown and startup again
Edit : oops here is the URL . http://forum.xda-developers.com/showthread.php?t=957652 it was the best I used I miss it since its not avalible for nand flashing

kanishkapd said:
thanks very much guys.
i got the energy rom installed successfully and already i m loving it. i m so glad i joined the xda community. one more thing pls. are these roms upgraded? how can i watch out for new upgrades, new features to be downladed...etc?
Click to expand...
Click to collapse
Out of interest which Energy ROM did you install.
You can check for updates by looking at thread & seeing date of latest release, going for latest releases & build numbers does not always give best results. Sometimes old is gold ;-) Best to settle into your current ROM & only update if things you deem important are updated/added.
Have fun with Energy ROM, well set up it makes Android & iphone look limited & outdated & seriously has some useful features Android is missing such as Auto APN setup & organised apps & settings menu & a far more advanced mail app to mention just a few.

siddharth singh said:
to be updated just keep looking out for any updates on the respective rom thread ... since u already have a custom winmo rom u culd try out this android sd build (im just trying to be of some help ) to use it u just have to download and extract the android build to your sd card dont extract it into a folder just extract the full thing to the fist screen u see when u open ur sd card... then just run clrcad first and then haret ...then enjoy ur android sd build to go back to winmo just shutdown and startup again
Edit : oops here is the URL . http://forum.xda-developers.com/showthread.php?t=957652 it was the best I used I miss it since its not avalible for nand flashing
Click to expand...
Click to collapse
thanks. certainly would try that too.

Mister B said:
Out of interest which Energy ROM did you install.
You can check for updates by looking at thread & seeing date of latest release, going for latest releases & build numbers does not always give best results. Sometimes old is gold ;-) Best to settle into your current ROM & only update if things you deem important are updated/added.
Have fun with Energy ROM, well set up it makes Android & iphone look limited & outdated & seriously has some useful features Android is missing such as Auto APN setup & organised apps & settings menu & a far more advanced mail app to mention just a few.
Click to expand...
Click to collapse
thanks for all the advice. i installed the energy rom, the first one in the thread. liked the pictures of that rom and the dev had mentioned it was the best....

Mister B said:
Out of interest which Energy ROM did you install.
You can check for updates by looking at thread & seeing date of latest release, going for latest releases & build numbers does not always give best results. Sometimes old is gold ;-) Best to settle into your current ROM & only update if things you deem important are updated/added.
Have fun with Energy ROM, well set up it makes Android & iphone look limited & outdated & seriously has some useful features Android is missing such as Auto APN setup & organised apps & settings menu & a far more advanced mail app to mention just a few.
Click to expand...
Click to collapse
Android already has auto apn! !
Sent from my HTC HD2 using XDA App